HP Pavilion h8-1132sc: Geforce GTX 960 works do not with h8-1132sc model? (BIOS?)

Similar Questions

• HP Pavilion HPE h8 - 1213c: black screen of death because of the new graphics card (EVGA geforce gtx 960)

  I just bought a new card (EVGA geforce gtx 960) to kick some butt. But during installation, it seems to be held on a black screen of death? Not the most fun to see... in any case, I had asked the store clerk if it would work and he said to, but it doesn't seem like it does... Is there a new BIOS I should download or something? Any help would be nice...:.

  My computer is a HP Pavilion HPE h8 - 1213c

  The graphics card is an EVGA geforce gtx 960

  If you have both. You can use one or. PIN 8 can be used as a 6 pin as well.

  http://www.EVGA.com/products/ProductList.aspx?type=0 & Family = GeForce + 900 + Series + Family & Chipset = GTX + 960

  2 smaller cards use a single PIN 6. The rest use a single 8 pin.

• iTunes 11.4 works do not with my new iPhone 6sPlus

  iTunes 11.4 works do not with my new iPhone 6sPlus.  Do I need a different version of iTunes?

  Yes, you will need a computer, iTunes 12.3.2.

• Looking to update the graphics card in my Dell XPS 8900 EVGA GeForce GTX 960.

  I have a Dell XPS 8900 Special Edition that I bought a few months ago. I want to upgrade the OEM GeForce 745 of GTX that it came with an EVGA GTX 960.

  I have the Dell XPS 8900 (processor i7 - 6700 k), 32 GB of memory, 2 TB HDD + SSD of 32 GB m2, monitor cache Dell UP2516D and Windows 10 Pro. I'll add a second monitor Dell UP2516D soon and later add an SSD and move the OS and applications on.

  My needs are not at stake. I mainly business applications (MS-Office, including access and project), finance and investment, and a lot of photo and video editing.  Photo editing software uses the GPU if I update.

  EVGA has suggested either of the following, based on what would be good:

  http://www.EVGA.com/products/product.aspx?PN=04G-P4-1961-KR

  http://www.EVGA.com/products/product.aspx?PN=04G-P4-3963-KR

  These cards are almost identical except;

  #1 is long of 6.8 ", has 1 BIOS, 1 fan and use 128 watts for $160

  #2 is 10.1 "long, has 2 BIOS, 2 fans and consume 160 watts for $170

  I thought I would replace the graphics card myself, but once I opened the folder, I was wondering if the two cards will even fit.  I saw that other people have swapped their graphics card, so it must be possible.

  When I look in my case, the existing graphics card is a single location.  These two cards are double slot.  In addition, it seems that there are a few transistors just next to the existing card.  When you install a card double slot, the new map is just overlap the transistors under?

  Finally, in view of these two cards and the XPS 8900 case, is it possible to put the card in?  Is it worth the extra $ 10 earn an extra BIOS and fan, to the detriment of one more card of time and 12 watts?

  Any help or thoughts are greatly appreciated, thank you.

  Dual cards fit without any problem. Many have improved their 8900 XPS and 8700 with cards that need two slots of width.

  I prefer the models dual fan as they run cooler. They have a bigger heat sink and with relatively low heat from GTX 960, some are silent at idle because the fans do not work.

  For example, MSI GTX 970 son fan only above a certain temp that only happens every game. Maybe the EVGA card did the same thing. It is nice to have a quiet system at idle.

  Regarding the adjustment, the MSI GTX 970 games 4 G card Dimensions are (mm) 140 x 277 x 35. Length and height are tight but it fits without cutting.

  In addition, as noted speedstep you run SATA cables under the card. I replaced the SATA cables with longer cables, so they route toward the front of the box, then under the graphics card and upward.

  This thread has many cards different people have added. (the link is on page 26) and about the halfway point is my son with the MSI GTX 970 system, which (I think) is slightly larger that the EVGA 960 you listed.  It also shows the case mod to add a front fan.

  en.Community.Dell.com/.../19611037

• Alienware X 51 RT2 Nvidia GeForce GTX 960 video card upgrade

  Hello

  I have the Alienware X 51 RT2 with 330 Watt power supply and 8 GB Dual Channel DDR3 at 1600 MHz.
  Currently, I have Nvidia GeForce 760 with 1. 5 G GDDR5 accompanying my Alienware X 51 RT2.

  So, I want to upgrade my GPU GTX 960 (4 GB) if possible if not then of 2GB.

  I don't know if this will work and works perfectly with my office:
  PNY GeForce GTX XLR8 960 4 GB graphics VCGGTX9604XPB

  Need of your recommendation. This is a good option, or there is a better option?

  Thank you in advance.

  Because Alienware has not tested or it has given approval. The same happened with the R1 GTX 670 and X 51. The GTX 670 ends up being a GPU supported for the X 51 R2 after testing. In theory, even a GTX 680 could work at the X 51, but you need a little powerful processor (like an i3 or a processor of T).

  PNY has a GTX 970 you can use. As long as it looks like the PNY GTX 970, you good to go. First and foremost, I suggest you look at the sons of the X 51 + GTX 970 before making a decision. Not only those who have proven it works, but those warning as well. Do this first before answer please.

• Adobe Premiere Pro does support the rendered assisted GPU on NVIDIA GeForce GTX 960 M?

  I am planing on buying a laptop Asus Rog G551VW-Fl052T containing an NVIDIA GeForce 960 M GTX and video editing with it using first pro and the gpu to help rendered. After searching trough the requirements here I couldn't find it. Then I saw this video on a similar laptop computer with a gpu are not not in the requirements works very well with gpu assisted rendering. Now I don't know if it works or not?

  I expect an answer, thank you!

  They do not have a list within the PrPro of video cards 'supported' as they did... so... your job is to make sure that the video card in use is at least to the standards. IF the map these standards... very well. Someone asked why PrPro has not choose to use its old GPU... that had only 512 MB of vRAM. He used this card with previous versions of PrPro, thought that it should always work. Nope... the minimum usable is now 1 GB of vRAM. It. you're fine... the list gives a choice of 2/4 GB of vRAM.

  In addition, for a cut card from nVidia, something above 1000 hearts CUDA is as important. This is a problem with the map you speak... support nVidia it lists to 640 carrots. It is quite low.

  I suggest you check during the Hardware forum... There are a lot of discussions on laptops as well as desktop computers.

  https://forums.Adobe.com/community/premiere/hardware_forum

  Neil

• A Gigabyte 970 G1 video games graphics card GeForce GTX will work in a HP Rfrb h9-1215

  Is a Gigabyte GeForce GTX 970 G1 Gaming 4 work GB GDDR5 PCiE video card in a HP Rfrb h9-1215?

  Phoenix 9: specifications:

  • Product name: Rfrb h9 - 1215t
  • Serial number: [personal information]
  • Product number: D7W28AAR
  • Operating system: Windows 7 Home Premium 64-bit Service Pack 1
  • Microprocessor: Intel (r) Core i7-3770 CPU @ 3.40 GHz
  • System memory: 16GB
  • Graphics device NVIDIA GeForce GT 630

  iflygvs wrote:

  Is a Gigabyte GeForce GTX 970 G1 Gaming 4 work GB GDDR5 PCiE video card in a HP Rfrb h9-1215?

  H 9Phoenix Specifications:

  • Product name: Rfrb h9 - 1215t
  • Serial number: [personal information]
  • Product number: D7W28AAR
  • Operating system: Windows 7 Home Premium 64-bit Service Pack 1
  • Microprocessor: Intel (r) Core i7-3770 CPU @ 3.40 GHz
  • System memory: 16GB
  • Graphics device NVIDIA GeForce GT 630

  No, the length of the card is 15.9 ".  Should be a full case large so he can adapt.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• NVidia Geforce GTX 960 in XPS 8300

  Hi, I'm looking to upgrade the graphics card Radeon HD 6450 in my XPS 8300 a GTX 960 (specifically, the edition of Strix ASUS) and I have a few questions:

  He enters the case? (dimensions of the card: 21.52 x 12.12 x4.09 centimeters)

  Will it work with the motherboard? (the card is pcie 3.0)

  It will work with food? (460w power supply card 'up to 150W additional 6-pin PCIe consumption)

  Sorry if I look like a noob but this is my first time upgrading a platform.

  Thank you!

  The graphics card:

  www.Asus.com/.../

  The stock answer from Dell, it's that they tested only a handful of older cards.

  The reality is that many have done on an 8300. Search this forum and see what worked.

  Insofar as the PSU, yes the stock PSU THAT will work with a GTX 960. It has a PCI power with two cable six pins on the connectors. If the specific card you choose has a connector 8 pins, most of the cards equipped with a 8 pin adapter 6.

  I'm not 100% on the supply POWER 8300 has two six pin PCI connector.  Best to open the case and look. I thought the 8500, a member of the family was when I wrote this.

  But, how old is your system, and how much time it runs a day that it might be time to consider a new power supply. If so, search the forums for what everyone puts in their 8300, 8700 or 8900 again. They are in the same case and best I can tell essentially the same power supply.

  Another advantage of upgrading the PSU will be slightly more efficient and quieter.

  I upgraded to Seasonic X - 650 s of my 8700 s two and have the OEM in a box as a spare for the members of the family.

  So, while I'm spending your money, you might consider a GTX 970. Prices are down because the next generation of cards is almost here. If you're game, you can consider a little more power under the hood of the GPU.

• Why does it take the GeForce GTX 560 Ti does NOT OpenCL?

  Starting from the Nvidia web site, he says that the GeForce GTX 560 Ti supports: DirectX 11 > 3D Vision > PhysX > CUDA > SLI >

  301,24 drivers have been used and have downgraded to 296.10 to see if that would help, but it didn't.

  When I check the performance, under Advanced tab, it shows that OpenCL is greyed out.  When I check the Sys info record also shows that OpenCL is not availible (included below).

  Why is this and when it fixed?  Now only available CS6 it should work.

  Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03 / 05:21:00:00) x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: Intel CPU Family: 6, model: 10, Stepping: 7 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading FP

  Physical processor count: 4

  Number of logical processors: 8

  Processor speed: 3411 MHz

  Built-in memory: 16351 MB

  Free memory: 12614 MB

  Memory available to Photoshop: 14726 MB

  Memory used by Photoshop: 95%

  Tile image size: 128K

  Image cache level: 4

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  Video card provider: NVIDIA Corporation

  Renderer videocard: GeForce GTX 560 Ti/PCIe/SSE2

  Display: 2

  View the limits: = top:-1080, left: 0, bottom: 0, right: 1920

  Display: 1

  View the limits: = top: 0, left: 0, bottom: 1080, right: 1920

  Video card: 1

  Graphics card: NVIDIA GeForce GTX 560 Ti

  OpenCL unavailable

  Driver version: 8.17.12.9610

  Driver date: 20120229000000.000000 - 000

  Video card driver: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um

  Video mode: 1920 x 1080 x 4294967296 colors

  Legend of the video card: NVIDIA GeForce GTX 560 Ti

  Memory: 1024 MB

  Texture size video Rect: 16384

  Problem solved.  NVidia has just released their 300 first series pilot and the Open CL option works now.

  I was running the drivers Beta 301,24 who had the problem so I downgraded to WHRL 296.10 drivers without change.  The last published on 5/22 301.42 seem to work.

• New iMac NVIDIA GeForce GTX 775 M (GPU NOT detected)

  I have the new Imac with NVIDIA GeForce GTX 775 M with 2 GB and FIRST CC I detected CUDA but in After Effects CS6 (11.03) last update so far, dosent detect GPU it is said is not compatible and uses OpenGL and CUDA zone is grayed out. Why first cc pro not recognize my card and the custom of After Effects. I did the thing of sniff upward into the Terminal and added my card in the list, and still nothing. someone, please help me understand that.

  
  

  > I have the new Imac with NVIDIA GeForce GTX 775 M with 2 GB and FIRST CC I detected CUDA but in After Effects CS6 (11.03) last update so far, dosent detect GPU it is said is not compatible and uses OpenGL and CUDA zone is grayed out. Why first cc pro not recognize my card and the custom of After Effects.

  This card has not been tested with After Effects CS6 (11.0). This card did not yet exist when, After Effects CS6 (11.0) has been developed and tested.

  See this page for details of the changes after effects CC (12.1) on the GPU use:

  http://Adobe.LY/AE_CC_12dot1_GPU

• iPads not working only not with the cache server

  Hello!

  We have implemented a Server Cache El Capitan... And the strange thing is that it works with macs and iPhones but not with iPads! Has anyone of you ever heard of something similar?

  Thanks in advance!

  Carl

  It works with macs and iPhones but not with iPads!

  There are many variables that affect how to find caching servers Apple devices.  Signed iPads on the same account iCloud like Macs and iPhones, or more precisely, are the accounts that iPads are signed in registered in the same country as the public IP address of the server being cached?  If your organization uses multiple public IP addresses, are the server cache and your DNS server set up correctly in what concerns these addresses?  Did you restart the iPads after implementation of the caching server, so that they immediately "forget" that they have found no update server caching and are forced to review?  (Restart devices - not the server!-is also recommended if you change the public address record in DNS.)  IPads use a different local subnet as other devices, maybe a caching server is not configured to serve?

  We can help you, but we need more information.

• HotSpot iOS 9.3.1 works do not with Cisco AnyConnect

  Does anyone else have this problem? Since the upgrade to 9.3.1 iOS I am more able to use one of the hotspot from my iPhone to connect to the VPN from my company using Cisco AnyConnect.  I can still connect via Wi-Fi, but not with the iPhone 5s or 6s hotspot feature.

  Ideas?

  TIA,

  DM

  Hello, I'm from the Italy, and I have the same problem on my 5 64 GB iPhone.

  I have updated to iOS 9.3.1 and now I don't have the Hotspot feature in the phone settings Menu.

  What is happen? I work with this feature and now I need to change the phone!

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.

• LifeCam vx 5000 works do not with tinychat

  Earlier today, I bought a lifecam vx5000, I set up and installed without problems, but I can't use it in tinychat.

  I've set up correctly, but I'm the only person who can see my cam. This question doesn't work with tinychat, it is going to work very well with programs like YIM and others, is it all just not compatible?

  Any help would be appreciated

  Hi acidnation,.

   
  As there is no problem using webcam with other programs, there must be some parameters of the tinychat to configure with tinychat webcam to work properly. We recommend that you double check that the settings for the webcam to tinychat or settings in tinychat to set up the webcam.
   
  For further assistance on tinychat, see contact information: http://tinychat.com/about.html
   
  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with HP4620 not working only not with the other computers in the House

  I bought a HP 4620 for my house and it works very well with my Vista laptop wireless.  However, it does not show as an option for our office or our second laptop.  Any ideas?

  Thanks, Sunny12

  Hello sunny

  I was going through your posts and help you've been putting online...

  Answered by Mr. Aneesh, pilots refers to the software that we are supposed to install in the computer.  Thus, these drivers are available on the CD that you have with your printer...

  Now, as you begin to install, you will get the screens user friendly and just follow the instructions and proceed with the installation.

  The system, that is to say; the monitor (computers) will ask you how you are going to connect the printer to the computer...

  Thus, there are 2 methods by which you can connect your printer to the computer...

  (1) USB - this is a cable that you find in the box the printer, but you would have to buy separately.  so, if you do not, please get one of the stores.

  (2) wireless - in this type of connectivity, you do not need the USB cable, because you would then have a device called a 'router '...  And here... It is the router that establishes the communication between the computer and the printer.

  Please try the following and if you get stuck, let us know.

  Kind regards

  Ashokkan.

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give it a Bravo!
  I work for HP