HP Pavilion HPE h8-1111: Deffective Network Connection (802.11n WLAN Broadcom adapter) - defective or software hardware

Similar Questions

• HP Pavilion HPE h8-1111: Deffective WLAN Card

  I've had a few confusing issues with my internet connection for a few weeks now:

  My computer seems to detect wifi networks (they appear in the Network Manager), but fails to connect because of an unknown factor.

  Basic troubleshooting informed me that wifi wasn't the issue (other devices could connect to) and it turns out that my computer could sometimes reconnect by mmee after a few hours (weird right?)

  This time it does not resolve itself. I tried to update my WLAN card through my laptop adapter, so the drivers via a USB key. Nothing worked (maybe bad drivers?) I've tried a few)

  My network card is a mini Broadcom 802.11n using magnetic antennas of the card. (youd cloth found in a laptop essentially...) I have little or no knowledge more than I could translate from the web on this kind of hard\software. I am at a loss.

  [Also, I've seen a few threads recommending the driver intel update of software, but it needs a connection to work its magic...]

  Hi @arnaud34,
  
  Welcome to the Forums of HP Support! I understand that you have problems with your wireless connection and I'm happy to help you.

  Is that something WLAN adapter that you added or the original map?

  The Support page and drivers for your computer model: PC desktop HP Pavilion HPE h8-1111

  I would recommend that you try the following to see if you can get a stable connection. If at the end you still have nothing so it may be that the card is bad, and a replacement is necessary.

  Troubleshooting your wireless network and Internet access (Windows 7)
  
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion HPE h8-1111: Wireless upgrade - hardware Options network adapter?

  Hi, I am looking to change my Broadcom 802.11n WLAN adapt because of allegedly defective hardware.

  I was thinking to buy the same as that but given that its in a port "minicards", I was wondering if something "more great, better and faster" could be used to allow a more efficient connection to my WIFI.

  I don't know what might replace it, so my way of thinking of installing a new one of the same. It's cheap, it's easy, but if someone has any advice as to what could be better, I can use any kind of edge.

  I suggest that you are looking for an USB 802.11ac wireless adapter.  It is dual band (2.4 & & 5G).  I do not use one at this stage, but they have used in the past with great success.  It's certainly easier to install.  You can check with the manufacturer to ensure that your router is compatible with it.  Whatever way you decide to go, I suggest you to AC.  It is much faster and the future.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Satellite L670 - unable to connect to my 802.11n WLAN router

  Hello

  I have a new Satellite L670 with Windows 7 Home Premium. With this laptop I can connect to my network 802.11 g WLAN. Everything works very well. Now I wanted to connect to my 802.11n wlan (router: linksys wrt610n) but it does not work. Laptop can't see the network (ssid) and it does not work if I entered the ssid manually too. The network works with my mac mini perfectly if it is not a failure of the 802.11n.

  I have updated all drivers from the laptop, all the updates that are installed under windows and I tested the driver broadcom broadcom itself (once the driver from toshiba Web site and the other driver from broadcom site) but nothing works. Laptop can't see the ssid and a manual configuration do not work too.

  Can someone help me pls?

  Post edited by: Artanis666

  Post edited by: Artanis666

  Hello

  What Satellite L675 you exactly and what WLAN card there?

  On the Web from Toshiba site, I saw some L675 models they support project t N n

• Pavilion dv6-7135nr: loss of network connectivity and wireless after upgrade to Windows 10 cable

  After the upgrade to Windows 10, I lose network connectivity after a restart of the computer.

  The operating system fails to load drivers Broadcom 4313 n. The driver date is May 8 202. The reason code is 31 on failure to load the drivers.

  I returned to Windows 7 and migrated to Windows 10 several times with the same result. I tried to upgrade on the Broadcom drivers, but Windows says they are up-to-date.

  I also see that the Realtek PCIe GBE Family Controller is having the same problem.

  I think it's a driver problem, but cannot find the correct set of drivers.

  Any help would be very useful. I have just re-upgrade to Windows 10 and have network connectivity.

  Hi @karbacdb,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6-7135nr Entertainment Notebook and problems with connectivity Wireless Windows 10. You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  Here is a tool of Broadcom for Windows 10 drivers that could help.

  Windows 10 drivers are available through Windows Update. Please be aware that HP does not Windows 10 drivers will be available from Windows Update.

  Please let me know how it goes.

  Thank you.

• Pavilion (model 15-n019wm): intermittent network connectivity problems

  I'm having a problem with this laptop (product number 15-n019wm) where often, but intermittent network connectivity will cut. I ran a troubleshooting of Microsoft (results below) who said it has solved the problem, but the problem always. I tried a Ping in the command line when this happened for www.yahoo.com and she is "ping: transmit failed." General failure. "These problems occur when I'm wired or wireless, and when I have a problem with network connectivity, all other devices on the network can access the internet fine, it is therefore a problem with this device specifically.

  Please help - thanks!

  RESULTS OF THE TROUBLESHOOTING TOOL:

  I could solve the problem by performing a reset on Windows 8, return to factory settings by using the e recovery partition.

• HP Pavilion HPE h8-1205eo: should I buy a new wlan card?

  I think that my Hp Pavilion HPE h8 - 1205eo:s wireless network card is broken. I can connect cable trought and everything, but he can't find any network without cable. I think I need a new card. I have a question before I go to things, might like wireless usb adapter work? Or do I have to buy a new card wlan? It would cost a lot less here where I live if I could buy a usb adapter... Thanks in advance.

  Good then the problem was with my wireless card, or should I say it was my fault. When I put on my new graphics card I accidentally pulled out the antennawire of my wireless network card. And now I feel very stupid but yes problem solved and all is good and working.

• HP Pavilion Touchsmart 15 n098nr qualcomm AR9485 Atheros 802.11b/g/n adapter connection problems

  HP Pavilion Touchsmart 15 n098nr does not connect to the AR9485 of Qualcomm Atheros 802.11b/g/n, adapter, or the virtual card directly Microsoft Wi - Fi. At Windows 8. Upgrades to Windows 8.1 a month or more. Problem of DIDN'Tnotice.  I even tried an upgrade of driover to a newer driver and nothing.  How can I fix / please!

  Hi @dexdome

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see you are having a few network issues with your Pavilion computer, and I'll be happy to help you. Not sure where you got your wireless driver. You mentioned you tried an upgrade of the driver, if you don't from the site Web HP try this driver Atheros of Qualcomm .

  Here is a document from HP on troubleshooting wireless network and Internet with a number of different troubleshooting steps you can try including the resolution of the problems Windows integrated. Here are some additional things more to try.

  Network power cycle:
  
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.
  
  Reset the TCP/IP settings:
  
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  Reset the winsock catalog:
  
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

• Pavilion P6 - 2176 s: update the ralink 802.11n wireless LAN card

  Receive a pop up saying that there is an update for ralink 802.11n wireless LAN card.

  Is - essential?

  Bad experience with the update of things that were not crucial.

  Thank you!

  Hello @css321,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about the way your computer displays a pop-up message prompting you to update the installed wireless card. I'd be happy to help you in this case!

  If you encounter any issues connecting to a wireless network on your computer, I wouldn't count the update as crucial. If your computer is having problems connecting to the network, even if the problem is intermittent, it may be a good idea to install the update.

  I hope this helps, and if you have any questions or concerns do not hesitate to post back!

  See you soon

• HP Pavilion dv5-1140ew Wi - FI card with 802.11n support

  Hi all.  I have HP Pavilion dv5-1140ew with processor - Intel Core 2 Duo T5800 2000 MHz (10 x 200), Merom - 2 M

  Chipset - Northbridge: Intel PM45, Southbridge: Intel ICH9M

  NVIDIA GeForce 9600M GT - graphics

  My question is:

  Is there a wi - fi card that works with my computer (I mean build in the card) and supports 802.11n - perhaps of the lates versions?

  I know that my card supports only 802. 11 b/g (Broadcom).

  THX 4 youre Help!

  Elriba wrote:

  Hi all.  I have HP Pavilion dv5-1140ew with processor - Intel Core 2 Duo T5800 2000 MHz (10 x 200), Merom - 2 M

  Chipset - Northbridge: Intel PM45, Southbridge: Intel ICH9M

  NVIDIA GeForce 9600M GT - graphics

  My question is:

  Is there a wi - fi card that works with my computer (I mean build in the card) and supports 802.11n - perhaps of the lates versions?

  I know that my card supports only 802. 11 b/g (Broadcom).

  THX 4 youre Help!

  Hello

  Your laptop probably supports the 802.11n standard. Intel 5100 a/b/g/n is probably the best option. Is the part number: 480985-001. See page 32 in this manual for more compatible chips:
  http://www.HP.com/CTG/manual/c01550108.PDF

• Unable to connect 802.11n of 5423 Inspiron 14z

  Bought 14z 5423 as new year clearance stock. Running windows 7 sp1 and have updated from dw1703 to 9.2.0.512 device driver (last available for 5423 on windows 7). Can connect to the router 802.11 g more, but fails to connect with the access point (Belkin Surf N300) on 802.11n. There is no problem with access point can connect to several other devices including XPS L502x. have followed the advice of other positions, including the definition of power option of the wireless adapter for maximum Performance. Also all 802.11n bandwidth of 20 Mhz/40 Mhz automatic option. Symptom of problem: 1. The SID for an access point is displayed only after you restart the computer. 2. double click on the access point allows me to enter security key 3. After failing to connect, the SID for access point disappears from the list appreciate any assistance.

  Thanks for the quick response. I use Norton 360 first. I tried to disable the firewall, but still the SID for the Belkin access point only appears after a restart and fails to connect after you enter the security key. No problem with the billion router plus 802.11 g.

  After a few experiences, I realized that the dw1703 works on channels near 2.4 Ghz.  After I changed the access point to connect to channel 7, I can now see the SSID and connect without any problems.

• Pavilion HPE h8 - 1360t: no internet connection

  I can't connect to the internet.  The wireless router works and connects the other points to the internet, so I know it works at this point.  I am using a cable to the HP Pavilion and tried a different cable and that did not help.  I tried different plug-ins for the router and which did not help.  Tried connecting direct modem HP and rude which did not work.  I think that the problem is with the NETWORK adapter that is on the motherboard.  In the system, he says he's working.  Also indicates that the drivers are the most recent.  But it is not connected to the internet, so I don't know if he knows.

  I installed Windows 10 a few months ago and everything worked until about 5 days ago.  Is it possible to check the NETWORK card?  Or what should I look for and then do?

  Another problem that may be relevant, it's that I lost the start menu that should appear.  I was right clicking on the Start button for everything that I needed for a few weeks now.

  TIA,

  Jim

  Hey there!
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I understand that wireless and the start menu does not work on your laptop.

  Please try a few steps recommended below.

  Step 1. Click the Start button, then select "Command prompt (Admin)" from the menu. This can run as administrator command prompt.
  Step 2. Type the following command and press the Enter key:
  Reg delete HKCR\CLSID\ {988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f
  Step 3. Enter the command below in the command prompt and press ENTER once more:
  netcfg - v u dni_dne
  Step 4. Restart the computer, and come back with your parameters of connection Wi - Fi free. You should now see a list reconstituted from all the networks available within the range.

  To fix the start menu, please follow the steps recommended below.

  1. launch the Task Manager

  Press [Ctrl] + [Alt] + [Del] keys on the keyboard at the same time, or with the right button of the taskbar, and select Task Manager.

  2 a new task in Windows

  When the Task Manager window opens, click more details to decompress, and then select new task run on the file menu.

  3 run Windows PowerShell

  When the run new task dialog box opens, type powershell, check the box to create this task with administrator privileges, and click OK.

  Type the following command: Get-AppXPackage - AllUsers | Foreach {add-AppxPackage-DisableDevelopmentMode-register "$($_.) {"InstallLocation) \AppXManifest.xml"}

  I would like to know if it works!

  Have a great day!

• Something missing in network connections

  Hello!  Hope one of you can help me with a problem, I am experiancing.  I've implemented the following:

  HP Pavilion DV7-3111e

  Windows 7 64 bit

  Product WC159EA

  In the course of the last few days, I have experianced loss of internet connection and this morning that it has decreased after use of a few minutes.  The icon in my toolbar now shows something completely different to the usual wireless meter strengh (a square box with what looks like a plug to the left of it and a red X).  I looked around the various places on my PC for an answer, and the best I can find is in the tab network connections in Control Panel.  I can see in there the following:

  BluetoothConnection

  Wireless Broadcom 43225 802.b/g/n (disabled) network connection

  I don't know it is supposed to be another symbol in network connections, a 3rd device.  I also clicked on the Broadcom device and computer enabled, but it remains disabled.

  I tried Windows help, downloaded and reinstalled the drivers and used the system restore, but none have so far permit.

  I hope someone can find something wrong with the above.  As I said, I'm sure I'm missing something in my network connections, a 3rd device (?) box.

  Thanks for any help you can offer.

  Best regards

  Hi Erico,

  I don't really know what to say.  I was searching around the internet for solutions more this afternoon (someone has to start a unique knowledge base with CORRECT solutions, so many Web sites with so many "solutions" for the same problem, ha!) and I noticed a comment about Zonealarm and its effect on wireless adapters after that that they have been brought so I've completely remove Zonealarm, rebooted, and guess what?  A new icon has appeared in network connections, "Microsoft Virtual Wifi Miniport Adapter", plus two children happy now and an adapter wireless who has reappeared and work!   I don't really know what to say apart from thank you for your time and effort Sir.

  Best regards from the Ireland!

• I accidentally deleted the setting wireless network connection icon, please help the change adapter

  I have Toshiba satellite A 505 S6989

  I accidentally deleted "Wireless Network Connection" icon of "changing the adapter setting" (network & sharing Center) while she was to allow...

  I have driver installed several times but he forces back...
  Also checked... but under the network adapter, Device Manager is showing only realtek ethernet... no wifi

  Please tell us how to get back this icon so that I can connect via wifi...

  Please answer as soon as possible
  concerning
  Afonso

  I solved the problem a few days before, sorry for the late response...

  WiFi card was detached from this place (it was a hardware issue)

  I opened my laptop and re placed this wifi card.

  now it works fine

  Thank you

• H8 Pavilion - 1280t: HP Pavilion HPE network connection not MPS 1000

  Hello

  My wired network connection is only 100 Mbps instead of 1000 Mbps. I have an end switch 24 ports. Other systems are shoeing 1000 Mbps connections. All HP updates are up to date. Any ideas would be greatly appreciated.

  Thank you

  Darrell

  Hi, Darrell:

  According to the specifications of your PC, it comes with a gigabit ethernet RTL8171EH-CG controller.

  On my professional notebook HP 350 G1 with a Realtek gigabit ethernet controller, the tab advanced settings for the ethernet controller in the Device Manager it is a setting the speed and Duplex.

  The default value on mine is auto-negotiation, and when I connect a cat 5e cable to the ethernet port, I get a 1 Gbps connection.

  However, there are other settings in the drop-down menu on mine allowing me to put a 1.0 Gbps full duplex connection.

  You can try if your card has the same group of settings.

  My son has a 580 s Dell.  This PC has a Broadcom gigabit ethernet card and I couldn't get the thing to connect to more than 100 Mbps.

  After checking on some forums, it turns out that on this platform, you must connect a Cat 6 cable to the ethernet port in order to get a speed of 1 Gbps of the thing.

  I got a cable Cat 5e branch above and when I changed to Cat 6, Lo and behold, I got the 1 Gbps connection, that it has been evaluated.