HP Pavilion HPE H8-1234: Hp screen after the passage of graphics cards

Similar Questions

• Black screen after the addition of graphics card to H530

  I am installing an EVGA Geoforce GTX 560 Ti in a H530. I have updated to 600w POWER supply and tried to set the parameters of the BIOS to the appropriate values. The BIOS settings are: display = AUTO, Secure Boot = Disabled, CSM = on, the Boot Mode = Auto (also tried Legacy), Boot Priority = first Legacy, Video Display = Auto (also tried PEG). Whenever I install the card and start, the screen appears black. Once I remove the card, the display returns normally. On board graphics uses VGA, GTX uses DVI. Any ideas?

  OK, it's pretty embarrassing that I almost didn't write back. The monitor I was using has entered both VGA and DVI. Apparently, it is default to VGA and I found a source selector to choose digital & now everything is cool.
  Why I decided to write back, also the closure of this point, is to note that higher speed graphics cards can be supported by the H530. I installed an EVGA GTX560 Ti, which is not the fastest of the world map, but it looks like that he compared with the list of maps in the maintenance manual which IMO aren't enough of an improvement to bother with. Anyway, maybe the Bios settings, I've used will help someone else.

• Dell external display stopped after the replacement of graphics cards

  How to reinstall Dell external monitor to display my MacBook Pro 17 2011? Monitor has ceased to recognize the computer after Apple Store replaced the graphics card.

  (a) check and plug your adapter and adapter cable goes to the LCD screen

  (b) select another resolution in the displays control panel by pressing OPTION when you click on "scaling".

  (c) resets the monitor to factory conditions using the monitor Panel.

  Try another LCD, or another cable or both.

  If after trying this you get no video contact Apple and let them know your GPU replacement may be damaged.

• Mode two-channel for HP - Pavilion HPE - h8-1234

  Hello world.

  (Online) has just bought a HP - Pavilion HPE - h8-1234 that comes with 10G of RAM.

  A saleswoman said it has 4 DIMM slots and one is open, so I think it has 2 x 4 and 1 x 2 G DIMMS.

  I would add 6-8 Gig RAM more, but want to ensure that it is running in Dual channel mode after I do the upgrade.

  Can I add a 8 G DIMMS in the open location, or I have to install 2 x 4 G DIMM and remove G 1 x 2 DIMM?

  Or maybe I should consider adding modules DIMM 2 x 8 G and remove the G 1 x 2 DIMM.

  I do a lot of Photoshop work, and my old computer would go with 4 GB of RAM.

  Thank you

  Please you start reading this very useful article titled 'everything you need to know about double and Triple, Quad Channel Memory Architecture"the link provided on page 5 of the article... This is where the nuts and bolts to install properly the memory is explained. Page 6 is a continuation of the two-channel section.  Basically, he says, on most of the Intel and the latest AMD motherboards... Place the matching pairs of memory in dealing with the same color (XMM1 and XMM3, XMM2 and XMM4 on these systems). On older AMD motherboards... Place the matching pairs of memory in dealing with the same color (XMM1 and XMM2 and XMM3 XMM4 on these systems). There are some rare exceptions to this rule.

  So, on your system, it should be a matching pair in 1 & 3 and 2 & 4 another pair... If you buy a pair of DIMMs to 4 GB, install them in 1/3 or 2/4 and place the pair of original 4 GB DIMMs in the remaining slots (make sure that the original DIMMS are a pair).  If you buy a pair of DIMMs of 8 GB, install them in 1/3 and place the pair of original 4 GB DIMMs in the remaining slots (make sure that the original DIMMS are a pair).

  Note: If the pair 4 GB of origin is not a game, the system will work in single channel mode. If you mix an original 4 GB and a new 4 GB, the system will run in single channel mode.

• HP Pavilion HPE h8-1234: upgrading the 7450 Radeon HD Nvidia GeForce GTS 450

  http://support.HP.com/us-en/product/HP-Pavilion-HPE-H8-1200-desktop-PC-series/5187019/model/5231572

  I would like to replace the default Radeon HD 7450, which was built in desktop and replace it with a Nvidia GeForce GTS 450, my question is, is it compatible with my motherboard? Everything in the desktop computer is the same, except that I replaced the power supply with a Corsair CX600. As is all other compatible with the motherboard Angelica 2 graphics cards? Thank you!

  Shadgam, welcome to the forum.

  New after the 640 GT video cards require UEFI in the motherboard instead of the standard BIOS.  HP didn't start using UEFI until mid-October 2012.

  I see no reason why the GTS 450 (see card) is not working on your computer.  Your motherboard has a PCI Express x 16 (Gen.2) slot.  You can always call the manufacturer's Technical Support to make sure the card you have chosen will work.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Can I put the radeon performance low hd 7450 to graphics Nvidia on Pavilion HPE h8-1234

  I use Nvidia video cards to upgrade my graphic instead of sticking to the Radeon card that my processor AMD based Pavilion HPE h8-1234 Office came with?  Would be to use 2 monitors (24 "and 22").  Computer used for photoediting (Photoshop CS6, LR4) + HD video playback.

  Windows 7 64 bit, core AMD FX 6120 6, 10 GB of RAM.

  Are there problems in the sectoral approach get the computer up and running again?

  Thank you!

  Hello

  A video card with certain powers, such as NVIDIA GeForce GTX 550 it in the office, I use, requires a minimum of 450 Watts and two PCIe 6-pin power connectors to operate. The specification of the manufacturer of a video card will specify what power is needed and how the PCIe power connectors are needed. I usually install OCZTechnology, Corsair or PC Power & Cooling brands that are well known in the enthusiast PC and professional circles IT. avoid no-name brands to avoid disappointment.

  This means that the standard 300 Watt power supply of your PC is not just enough.

  The video card that is currently in your office is a low-power video card that requires minimal power to operate, but unfortunately also doesn't have a lot of video processing power.

  You can find the video that will show you how do it if you feel comfortable enough to make yourself. You can also pay to have done by a tech in a store, if you think you need.

  It is strongly recommended that the PSU have the following specs or better. ATX12V V2.3 / EPS 12V V2. These specifications ensure that the power supply will have connectors that requires your PC.

  Due to the limited space in the case of an OEM PC like yours, it is also suggested that food being of modular type.

• Pavilion 15-243cl after automatic update of windows 8.1 I get a black screen after the home page.

  recently installed an automatic update of windows 8.1. Now, I get a black screen after the home page. I can load the Task Manager and access the internet. tried to go to the SafeMode to start with f8, but several attempts failed. I updated my graphics driver from AMD today and same black screen. I've also restored sytem to an earlier date using the HP utility with results screen - black even after the home page.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of session question (IE before the last batch of Windows updates have been applied) occurred initially and then proceed to the system restore.

  Kind regards

  DP - K

• Black screen after the windows login

  Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

  -Task Manager is able to open when the screen is black (shows explorer.exe running)

  -J' have the drivers on the HP support site

  -laptop is HP Pavilion DV7 3024ca

  You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.

• Black screen with blinking cursor after the passage in MSC mode

  I followed the recommendation to disable startup secure in the Bios then move the UEFI Bios to the CSM. But when I go to set up what I see is a black screen with a stable cursor in it. And it doesn t go in the Bios.

  The black screen remains.
  I turn off the laptop and once again now, but I still have a black screen with a cursor that is stable and that s it.

  It's like that and it doesn t go to windows even go into the Bios, I can t.
  What should I do?

  Help, please...

  Hello

  After the passage of the CSM and disabling secure boot UEFI mode, you will not be able to boot from the HARD disk as the installation of Windows 8 requires secure boot and the mode of the UEFI.

  Now you can boot from the disc or other media bootable (USB flash key) to install the Windows 7 system.

  I guess you've made these changes installed Windows 7. Right?

  By the way: what model of laptop you have exactly?

• Satellite M70 - black screen after the installation of recovery

  So far, what I did is put in the Recovery DVD - ROM product. Then when my computer restarts I was invited to restore my computer failing and said. After that he went through this process, that he told me to remove the disc that I did. Now he only get a black screen after the Toshiba screen that gives me options f2 for Setup and f12 for options.

  I don't know what to do now to make my laptop works again. Help, please.

  Hi Zach_1,

  Have you tried to launch the installation of recovery again? Maybe that something was wrong during the first installation, it might have arrived
  Then retry the recovery facility and see what happens.

  If it doesn't work you should try a normal Microsoft disk so determine if the problem is related to hardware or recovery disk.

• Blue screen after the recent updates of security for Windows XP SP3.

  I got following error messages "Blue screen" after the latest updates from Microsoft:

  0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

  @Jazzman1962 and flowie,

  I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• white screen after the signing, the

  I have a laptop HP 2000 who now has a blank screen after I connect. I've removed ask.com because it never works and when I restarted my computer I get this white screen after the signing, the. I can still see my settings or start menu. What can I do to solve this problem. Help, please.

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, old the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the opening of the session the question first and then proceed with the restoration of the system.

  Kind regards

  DP - K

• Scrapie screen after the ignition of his sleep.

  I recently bought the HP Pavilion dv6-6102AX notebook PC. With AMD A8 - 3530MX APU, Dual Graphics with Radeon HD 6220 G and 6750M, 8 GB of RAM and 750 5400 RPM HARD drive, running under Windows 7 64-bit.

  I updated the software of the laptop, for example, by using Windows Update, but I did not update the graphics driver again, when I go to the main site of AMD to download drivers, it says.' ... your hardware/software is incompatible. I checked for my drivers on the HP site but it is not found. (The model dv6-6102AX is not listed on the sites of HP).

  Can someone help me?

  Thank you.

  The model is now listed on the HP site, the site for drivers are:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5131405&LC=en&cc=au&DLC=en&lang=en&tmp_track_link=ot_we/prodlink/en_AU/5131405/loc:0 & cc = AU

  Downloaded the latest drivers (graphics card) and the stop screen flicker afterwards of his sleep.

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7