HP Pavilion M4-1002TX: network name not displayed in my HP pavilion m4-1002TX

Hi you

Really need your help. My lappy since there are 2 weeks unable to connect on behalf of the office network. The name of the network is invisible. Connection are available but not connected. I tried all the HP PC, troubleshooting wireless network and internet in vain.

I have no idea right now. Some laptop HP with the same model at the office have a same problem.

Other network name are appear in the list & also can direct connect using the usb cable.

Please help me.

OK after the reset of the modem the network name does not always show upward?

Tags: Notebooks

Similar Questions

  • Error with the listener. ORA-00132: error of syntax or network name not resolved

    Hi all

    I get a strange error while trying to start the db.

    SQL > startup nomount
    ORA-01078: failure in the treatment of system settings
    ORA-00119: invalid specification for the system LOCAL_LISTENER parameter
    ORA-00132: error syntax or network name not resolved "LISTENER_TSS2A076N3."

    Listener is running.

    Here is my file Listener.

    listener.ora.tss2a119n1 # Network Configuration file: / oradb/oracle/product/asm /.
    11.1.0/network/admin/listener.ora.tss2a119n1
    # Generated by Oracle configuration tools.

    LISTENER_TSS2A076N3 =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xx.xx.xxxx.net)(PORT =)
    (4329)(IP = FIRST))
    (ADDRESS = (PROTOCOL = TCP) (HOST = xxxx.xxx.xx.xxxx.net)(PORT =)
    (4329)(IP = FIRST))
    )
    )

    SID_LIST_LISTENER_TSS2A076N3 =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = pnet01r_dgmgrl)
    (SID_NAME = pnet01r3)
    (ORACLE_HOME = oradb/oracle/product/db_1/11.1.0)
    )
    (SID_DESC =
    (SID_NAME = + ASM3)
    (ORACLE_HOME = oradb/oracle/product/asm/11.1.0)
    )
    )


    Well, I'm trying to install data guard and this error I get on the standby server. The listener preceding is also the same.

    Help, please.
    concerning

    I'm not very clear on that... Kindly explain... what exactly needs to add, delete or modify.

    Follow the link, it shows why and how LOCAL_LISTENER needs a specifications in the tnsnames.ora. You don't have a problem with the native listener.

    Werner

  • Wireless networks are not displayed!

    Just replace a hard drive in a friends address. I did a clean install of W7 and did all the updates via a wired connection.
    My wireless network does not, any more than all the networks around me I see on my personal laptop.
    No conflicts in Device Manager. Device is not working properly.
    I can enter my network name and key to manually authenticate and connect, but it's not good to travel and use in public places.
    I was not able to find a solution anywhere.

    Any suggestions?

    Found the answer on ask.com
    Had to open cmd and run commands...
    Empty and reset some things, restarted and seems to work now.

  • Names not displaying tab does not

    Since the last update for Firefox (unfortunately I don't remember what version I have updated since) the tabs no longer display their names except for the one that is selected. They show just a blank tab with the thumbnail image.

    However, if the firefox window is not selected (for example, it is in the background with another window in front of him), the names appear.

    It is possible that there is a problem with the font color and a white or transparent color is used for unselected tabs.

    You ruled out problems caused by an extension or theme?

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • Smartphones blackBerry address book name not displayed in incoming call

    When I get incoming calls, sometimes the name of the contact is displayed and sometimes not. After the call is completed, the contact name is mentioned in the call log list. Please help in the resolution of the same.

    Remove the selection the checkbox and restart your phone by removing the battery.
    You should be able to see all the names when they call then.

    HTH

    mrupadhyay

  • Network name not found between 2 XP Pro computers. Just stopped working

    I have a computer network that has worked successfully for several years and stops suddenly. The only thing I can think of that changed is that I have installed the "critical" updates that windows recommended I have install. I don't know that's the problem that I didn't test the network for several days before or after the installation, but it can be an important clue

    my network seems to be still intact, as I can ping and access any computer manually via the IP (\\192.168.1.x), but I can't access or their ping more than name (\\computer_1). All my shared drives and printers to refer to names of computers for their ports. None of the networked computers appear in the network neighborhood with the exception of the computer I'm working on.

    Thinking it was simply a problem of firewall/virus protection, I have disabled all of this on both xp computers, but it made no difference. The kicker is that Mac computers can still access the printer shared by computer name. The problem seems to lie between the two xp computers.

    All the obvious print and file sharing settings have been verified to be correct. I even went as far as to set up the network again, that made no difference.

    Two xp computers revealed FALSE when I checked who was the master browser, so I changed my desktop to TRUE to indicate that as long as the master browser.

    On my network, I have 2 MAC OSx 10.5 and 2 windows xp pro SP3. Mac can still access shared printers, computers XP cannot...

    Here are the results for nbtstat - n and ipconfig/all:

    WINDOWS XP DESKTOP CONNECTED VIA AN ETHERNET CABLE:

    C:\Documents and Settings\Drew > nbtstat - n

    Connection to the local network:

    [Node IpAddress: [192.168.1.7] Scope Id:]

    NetBIOS local name table

    Name Type State

    ---------------------------------------------

    DREW_DESKTOP <00>UNIQUE registered
    <00>MSHOME GROUP registered

    DREW_DESKTOP <20>UNIQUE registered

    <1E>MSHOME GROUP registered

    C:\Documents and Settings\Drew > ipconfig/all

    Windows IP configuration

    Name of the host...: DREW_DESKTOP

    Primary Dns suffix...:

    ... Node type: unknown

    Active... IP routing: No.

    Active... proxy WINS: No.

    Ethernet connection to the Local network card:

    The connection-specific DNS suffix. :

    ... Description: 3Com EtherLink 10/100 PCI TX NIC (3 c

    905 B - TX)

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    IP address...: 192.168.1.7

    ... Subnet mask: 255.255.255.0.

    ... Default gateway. : 192.168.1.1.

    DHCP server...: 192.168.1.1.

    DNS servers...: 192.168.1.1.

    Lease obtained...: Tuesday, December 28, 2010 10:55:34

    AM

    End of the lease...: Wednesday, December 29, 2010 10:55:3

    4 O'CLOCK IN THE MORNING

    WINDOWS XP LAPTOP CONNECTED VIA THE WAN:

    C:\Documents and Settings\Drew > nbtstat - n


    Wireless network connection:

    [Node IpAddress: [192.168.1.3] Scope Id:]


    NetBIOS local name table


    Name Type State

    ---------------------------------------------

    DREW_MACBOOK <00>UNIQUE registered

    MSHOME <00>GROUP registered

    DREW_MACBOOK <20>UNIQUE registered

    MSHOME <1E>GROUP registered

    MSHOME <1D>UNIQUE registered

    .. __MSBROWSE__. <01>GROUP registered


    Connection to the local network:

    [Node IpAddress: [0.0.0.0] Scope Id:]

    No name in the cache

    PdaNet broadband connection:

    [Node IpAddress: [0.0.0.0] Scope Id:]

    No name in the cache

    Bluetooth network connection:

    [Node IpAddress: [0.0.0.0] Scope Id:]

    No name in the cache

    C:\Documents and Settings\Drew > ipconfig/all


    Windows IP configuration

    Name of the host...: DREW_MACBOOK

    Primary Dns suffix...:

    Type of node...: peer-to-peer

    Active... IP routing: No.

    Active... proxy WINS: No.

    Ethernet wireless network connection card:

    The connection-specific DNS suffix. :

    ... Description: Adap of Atheros AR5008 wireless network

    TER

       

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    ... The IP address: 192.168.1.3

    ... Subnet mask: 255.255.255.0.

    ... Default gateway. : 192.168.1.1.

    DHCP server...: 192.168.1.1.

    DNS servers...: 192.168.1.1.

    Lease obtained...: Tuesday, December 28, 2010 08:24:41

    M

    End of the lease...: Wednesday, December 29, 2010 08:24:41

    AM

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected

    ... Description: Marvell Yukon 88E8058 PCI-E Gigabit

    Ethernet controller

            

    Ethernet connection high speed of PdaNet:

    State of the media...: Media disconnected

    ... Description: Adapter to wide band PdaNet

      

    Bluetooth network connection Ethernet card:

    State of the media...: Media disconnected

    ... Description: Bluetooth (Personal Area Netw device

    ORK)

            

    Thanks in advance for your help.

    Hello

    If the AV Firewall is 3rd party costume Disable them can still block LAN traffic.

    Try the following on each computer.


    WinSock and TCP/IP update.

    Type Cmd in the search text box.

    Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

    Type netsh winsock reset at the command prompt and press the Enter key.

    The same processes to refresh the TCP/IP replaces the command typed with.

    netsh int reset Press enter

    ipconfig/flushdns press Enter

    Restart your computer.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Field '' a user name not displayed when sent

    Hello

    I've been an incredibly annoying problem that hinders my workflow significantly.

    I'm creating an order form which was first sent to me for signature, then to the customer for signature. Although I would add the name of "Signatory 2" it not be shown when sent. It persists only with this field.

    Hi maxk4993093,

    Please make sure that you assign the fields correctly.

    Double-click the field & check if he is assigned to the correct "addressee".

    Please refer to the below help knowledge base documents:

    Assign roles to form fields

    Adding form fields. Tutorials

    Create forms

    Types of fields

    Appearance of the playing field

    Sequential and parallel workflows sending Adobe sign

    Kind regards

    Nicos

  • The names of blackBerry Smartphones Contact not displayed when calling

    Hello

    New in BB, moved my SIM Nokia in the 8900.

    I have problems with names not displaying not when they call the number is entered differently (depending on whether I'm foreign or in Thailand). Some numbers are saved under the international numbers (+ 66829...) to other entries like (0869...).

    The number is certainly in my BB as + 668612345678, but if they call when I'm in Thailand the number will appear as 0861234567. To get around it, I'll have to get into contact and add an additional number for each contact has + 668612345678 and 0861234567.

    Is anyway to work around this problem?

    It all depends on how you have your game of smart dial.

    It could be one of the three solutions... Try these:

    1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
    Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
    * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

    2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
    * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

    3. you probably have "Content Protection" located on your address book.
    Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

  • Windows not showing ReadyNAS network name

    My windows system (win7 & 8.1) do not display my ReadyNAS when I browse the network:

    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.

    View C:\Users\schapman>net
    Server name remark

    -------------------------------------------------------------------------------
    Laptop \\CHAPTOP Scott Chapman
    The command completed successfully.

    View C:\Users\schapman>NET \\storage
    Shared resources to the \\storage

    Storage

    Share name Type used as comment

    -------------------------------------------------------------------------------
    Drive Document documents folder
    ESATA_HDD_1 disk Seagate ST3000DM003-1F216N
    Folder on drive music music
    Folder on drive photo images
    Scott Scott (UNC) drive base directory
    Videos video disc file
    The command completed successfully.

    nmbd looks like it's running OK:

    ([25/11/2014 14:53:54.081070, 0]... lib/util/become_daemon.c:124(daemon_ready)
    STATUS = demon start-up "nmbd" finished and ready to serve connections
    ([25/11/2014 14:54:18.293011, 0]... source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
    *****

    Samba STORAGE server name is now a local master browser for subnet OURHOME 192.168.2.93 pole

    *****
    ([25/11/2014 14:55:06.891433, 0]... source3/nmbd/nmbd.c:169(nmbd_sig_hup_handler)
    Got SIGHUP dumping of debug information.
    ([25/11/2014 14:55:06.891648, 0]... source3/nmbd/nmbd_workgroupdb.c:276(dump_workgroups)
    dump_workgroups()
    emptying the Working Group on the 192.168.2.93 subnet: subnet mask = 255.255.255.0:
    Current master browser OURHOME (1) = STORAGE
    40849a 03 STORAGE (storage)
    ([25/11/2014 14:59:17.944256, 0]... source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
    *****

    Samba STORAGE server name is now a local master browser for subnet OURHOME 5.205.249.48 pole

    *****
    ([25/11/2014 20:29:27.991705, 0]... source3/nmbd/nmbd.c:169(nmbd_sig_hup_handler)
    Got SIGHUP dumping of debug information.
    ([25/11/2014 20:29:27.991956, 0]... source3/nmbd/nmbd_workgroupdb.c:276(dump_workgroups)
    dump_workgroups()
    emptying the Working Group on the 5.205.249.48 subnet: 255.0.0.0 = netmask:
    Current master browser OURHOME (1) = STORAGE
    40849a 03 STORAGE (storage)
    ([25/11/2014 20:29:27.992231, 0]... source3/nmbd/nmbd_workgroupdb.c:276(dump_workgroups)
    dump_workgroups()
    emptying the Working Group on the 192.168.2.93 subnet: subnet mask = 255.255.255.0:
    Browser master current Iris (2) = CHAPTOP
    Current master browser OURHOME (1) = STORAGE
    40849a 03 STORAGE (storage)
    STEWIE (40011003)
    ZENBOOK 40011003 (mobile Andra)
    ([25/11/2014 20:29:50.893727, 0]... source3/nmbd/nmbd.c:169(nmbd_sig_hup_handler)
    Got SIGHUP dumping of debug information.
    ([25/11/2014 20:29:50.893926, 0]... source3/nmbd/nmbd_workgroupdb.c:276(dump_workgroups)
    dump_workgroups()
    emptying the Working Group on the 5.205.249.48 subnet: 255.0.0.0 = netmask:
    Current master browser OURHOME (1) = STORAGE
    40849a 03 STORAGE (storage)
    ([25/11/2014 20:29:50.894197, 0]... source3/nmbd/nmbd_workgroupdb.c:276(dump_workgroups)
    dump_workgroups()
    emptying the Working Group on the 192.168.2.93 subnet: subnet mask = 255.255.255.0:
    Browser master current Iris (2) = CHAPTOP
    Current master browser OURHOME (1) = STORAGE
    40849a 03 STORAGE (storage)
    STEWIE (40011003)
    ZENBOOK 40011003 (mobile Andra)

    Hello, I don't know if this response is to the correct place, but after searching a solution, me I've read a lot of comments here I had problems in recent days since the update Firmware to 6.4.1 on my NAS RN202 - I didn't know if a Windows Update (10) that caused or something else , but everything has changed and my NAS202 ceased to appear under 'Network' - I could improve this by moving some files and folders in different directories because it seemed that files plus unit had to refresh (or what did the SIN) more often he couldn't find things, I also found that some of my permissions appear different (always take a screenshot of what works) , but the REAL kicker was when I discovered that under accounts > authentication > name of task force: it was somehow become VOLUME... I would have never called it that opting for the more obvious choice... the WORKING group once I changed it everything has started to work again properly including on my laptop connect wirelessly to the network. Maybe something to check :-)

  • Vista will not display description of the file on mouse over. File name, Type, size, and Date modified see the upward, but no description.

    Vista will not display description of the file on mouse over. When I mouse over, a pop-up window displays showing: file name, Type, size and Date of change, however, it does not show the description of the file.

    So, for example if I have 5 files on different types of screw - the description tells me that the size of the screws. IE. 1.5 mm or 1. 8 mm.

    Update: try to get the description of the file displayed messing around in the file properties, now out of 10 records, only 2 includes the name of the file in the mice on the pop-up window. So now what lack us, it's the file name and the Description file.
    Help, please...

    Description of the file in as long as this is not one of the available variables, which can be shown with ToolTips - but there are others who could easily serve the same purpose. Here are the options:

    Consulted
    Attributes
    Created
    DocAuthor
    DocComments
    DocSubject
    DocTitle
    Modified
    Name
    Size
    Type
    To write

    Here is an article on how to change what is shown. http://www.ghacks.net/2008/02/10/customize-windows-explorer-tooltips/ . It is to change the registry, make sure you so first back it up before doing anything so that you can recover in case you make a mistake (or do the right thing, but it does not work as expected). http://www.instant-registry-fixes.org/how-to-backup-windows-vista-registry/ .

    I hope this helps.

    Good luck! Lorien - MCSA/MCSE/network + / A +.

  • Thunderbird seems to be corrupted, with a wide range of problems (e-mail folder does not open it, names of the attachments not displayed,...) CAUSE: McAfee Antivirus

    Problems include:

    • By clicking on an e-mail folder does not open it - open in new tab works
    • Names of the attachments are not displayed. Clinkg on the trombone does not open them. "Open all the ' works
    • Sometimes, if I click on an email in the message (?), disappeafrs message pane, and then as I move the cursor to the bottom of the list, they all disappear

    I have restored my pc (Win 8), performed drive controls, run Malwarebytes and virus checks and found nothing.
    I've uninstalled and reinstalled TB several times without success.

    Stuck!

    • First of all I would like to get rid of McAffe. ALTOGETHER. Personally I don't like, but mostly because that its been the center of TB problems.
    • Then download and use MozBackup to save your settings.
    • Copy %appdata%\thunderbird\profiles somewhere for additional security.
    • Remove the data (% appdata%\thunderbird) and tuberculosis
    • Mozbackup allows you to import your settings.
  • Under TOOLS/Account Settings / your name / what I chose for "your name" is not displayed when you send an email. What should do? Thanks, paul

    Question: Under TOOLS/Account Settings / your name / what I chose for "your name" is not displayed when you send an email. What should do? Thank you! Paul

    This looks like a problem with your email service, not with Firefox (or Thunderbird).

    It is possible that you need to set the name sent by logging into your webmail account online (e.g., Yahoo! Mail or Gmail). Web e-mail providers like these often put sending appoint themselves, ignoring the settings of your email client.

    Unfortunately, since it is not a matter of Firefox you're unlikely to get help on these forums. I suggest that you find the support site for your e-mail provider, as they should be much more useful.

  • IPod 160 GB abruptly stopped, the search results display when connected to a PC. If any song name is typed into the search, it does not display this song while the song is in the Ipod.

    IPod 160 GB suddenly stopped, view the results of a search when it is connected to a PC. If any song name is typed into the search, it does not display this song while the song is in the Ipod. Simply, it displays "no record found".

    Click the magnifying glass in the search box and make sure the entire library search is not checked.

    TT2

  • The browser Safari windows:-export Japanese character of file name are not displayed

    I am facing a problem on windows 7 safari browser.

    When I export the pdf file, the Japanese characters in the file name are not displayed.

    Hello

    Apple did not support Safari for Windows for years is not surprising that you have problems.

    Use Chrome or Firefox.

  • Pavilion DV5 - 2040ca: Volume and brightness not display when changed

    Hey all, I recently formatted my laptop, a HP Pavilion DV5 - 2040ca and I noticed that (even after installing the drivers), it does not display the current volume/brightness when it is changed via the shortcut keys associated with the F - keys. I was wondering which driver will enable this function on my laptop, because it would be good to have.

    Thanks in advance.

    Hello

    For your laptop, the screen on a brightness/volume is provided by HP MediaSmart SmartMenu - you can download this from the link below.

    Note:  You should have at least 1 other MediaSmart software installed (any) before installing this.

    http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48552.exe

    When the installation is complete, restart the laptop.

    Kind regards

    DP - K

Maybe you are looking for