HP Pavilion m6 random Gray lines at startup
My HP Pavilion notebook m6 just randomly started appearing grey lines on different sections of the screen during startup. Usually, it also causes the laptop to close. I tried to tilt the screen back to see if it was a connection to the screen, but it changed nothing. Plug the charger is the entire screen have gray lines when starting. I mean by gray lines, it is almost as if you unplug the cable from the TV. Some lines are just randomly and staticy yellow and black type. When the laptop starts up and gets past the login screen is not do.
Any help as to why he does this?
Well, I sat for an hour after struggling to understand the problem...
Sometimes if you held the power button down it would be arrives at start of Windows then going crazy, went from a gray staticy flicker to blue to red, etc., then turns off. I took out battery, hold the power button for 1 minute to get rid of all the energy stored, deleted RAM memory and reinstalled everything.
Oddly enough, the computer starts fine in mode safe mode, but not in the regular windows all the time.
Has finally got to start Windows, travelled the HP support site and did an audit and found updates the BIOS was one of them. Updated it restarts fine now. Will post if anything that acts to the top once again!
Tags: Notebooks
Similar Questions
-
Random gray lines under text cs5
I'm designing a page of album with text in cs5 on imac ~ noticed there are random short light grey lines under the text. They are there until I flattened and still after and even after the backup ~ they are a kind of a guide line? And what worries me is the will appear in print, is there a way to get rid of them?
If you zoom in to 100% (actual Pixels) do you still see it?
Have you used this particular police before without this problem?
-
Gray lines at random in the text placed
Hello
I'm working on placing a word of a manuscript document in InDesign CC. I spent hours and hours to get the text document formatted just right so that I could just place without having to do much else. To my dismay, some of the poems that I place make their appearance with random gray lines interspersed in the text box. More troubling still, when I export to PDF, the lines are flat black. How can I get rid of these? If there is a way to do this effectively without having to modify the original text document in InDesign, it would be ideal. Fixing of the screenshots below. Thanks in advance for any help!
Those look like paragraph nets (rule below, in this case), and you have obviously some empty paragraphs used to add space instead of use the space before or after the space to spread the paragraphs apart.
-
Gray lines clear that appears when loading Web pages.
In the little time when I click on a link and Firefox loads the page, there are these small gray lines that appear. (http://prntscr.com/56zhsd) When I bought my computer, there are not. But less than a week, they began to appear and they kept adding just now since.
I've updated to the latest version of Firefox and I ran it in Safe Mode, no solution.You can try to disable hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
You will need to close and restart Firefox after enabling/disabling this setting.
-
Gray lines through the pictures
Hello
I recently downloaded the photos from my iphone, and on them the Photos app preview, they showed with gray lines in the Center with a mini-apercu of the photo. This happened only in the first installment of 100 or more, and the rest of the photos are normal.
Someone else has come across this or know how to fix this problem?
Export the unmodified original
a couple of these problem photos on the desktop and open them with preview. Check if the gray lines are there or not.
-
HP Officejet Pro 8600: scanning on glass OK; scanning with ADF gives a gray line
Hello
When I scan a document on my HP Officejet Pro 8600 glass all in one, everything is OK. However, when I use the ADF for scanning, a gray line appears on the scanned document. Can I reslove cela to clean something or is this a technical problem?
Thank you!
Marc
Hello there is Marc aka @mk75053 ,
I'm sorry to learn that when you scan from your ADF file, you see a line on your document. This is usually fixed by clean under the scanner, however there could be other causes. I have the best guide for this type of situation that will show you where clean and give the appropriate instructions. I hope that this rid your question!
Click here to start: vertical stripes, lines or streaks in the Copies, faxes or Scans
Please let me know if I can help further.
Best wishes
-
Quick help: how to make grey, white, gray lines in listbox?
Hello
As in the subject. How to make gray, white, gray lines in listbox?
See you soon
Apparently, Jim and I feel the same (and I need a new CTC for 2013)
Best
-
HP psc 2110xi to print vertical gray lines on all printing (Windows 8.1)
My hp 2001xi all-in-one psc began to print vertical gray lines on all the text and images on the test document in the problem-solving programs. I asked troubleshooting this site to uninstall/reinstall it from this site which it has fact/could not, sayiny do my control panel, which is now no longer present the program of hp, or my research could find it. I am running Windows 8.1 on my ASUS laptop.
HP Print and Scan Doctor can't find anything wrong.
I can still print documents with gray lines, obscuring everything.
April1440
Thank you for the information about the printer to uninstall for Windows 8.
The problem of the gray line seems to be now disappeared after a very simple remedy...
1. disconnect the USB and power cord
2. plug in USB and power cord
Tah dah! Printer's original, more grey lines!
I got this tip on the site, although the "vertical" illustrate and described were quite different than what mine were.
Now, if I will be memorized for future reference, as I remember that this remedy has worked for other issues in the past.
Thanks for the support. April
-
HP C5380 all-in-one printer: a thick black/gray line down the page when scanning.
1 HP Photosmart C5380 all-in-One Printer
2. Windows 7 64 bit
3. no error is, as usual but preview and print with a dark gray line / think through the page.
4. I got a new monitor.
How can I fix? the optical reading area is clean, no dust or dirt present and it just started this without reason. The connections are good, I unplugged and plugged the cables of the computer and the printer and the problem is still there.
When I scan the document line is present and even when I print the line appears on the printed page is not my screen.
bbjae, it looks like there may be a residual electric charge accumulated in the unit. When was the last time you did a Hard Reset on this unit?
Hard Reset:
* Unplug the unit while the printer is on
Disconnect the other end of the power cord from the wall jack directly
* Wait 30 seconds
* Plug power back in and make sure that the device is running
So, it is a document with the steps to help fix the vertical lines and scratches in the copies or scans, click on the link below:
-
gray lines and sections on the imported images
Photo transfer problem
During Transfer of photos (jpeg) of nikon D3000 to 531 with Vista Dell inmages are fine on the camera photo, but once imported, Vista adds gray lines and sections to more than 60% of the images
Just some thoughts...
(1) the corruption can develop when downloading
photos via the USB port after a long when photo shoot
for Camera batteries are low.(2) you have a bad USB cable or port.
(3) If you have an internal drive or external...
try to insert the memory card and download it from
There just to see if the pictures are always corrupt. -
gray line after each line of list field
Hi friends,
I would like to draw a gray line after each line of listField I use folowing d
graphics.setColor (Color.LIGHTGREY);
graphics.drawLine (0, y, Graphics.getScreenWidth (), y);
then the line is gray (the color of the text)
then as the then-jeutiliser
graphics.setColor (Color.LIGHTGREY);
graphics.drawLine (0, y, Graphics.getScreenWidth (), y);
graphics.setColor (Color.BLACK);
It works, but, more early when the update comes to rowing of the color of the text will change to white but now always the text is black
So, how can I draw a gray line after each listfield rw without affecting the texts
You must save the original color and reset it after drawing like that.
int origcolor = graphics.getColor(); graphics.setColor(Color.LIGHTGREY); graphics.drawLine(0,y,Graphics.getScreenWidth(),y); graphics.setColor(origcolor);
-
Gray lines. Viewport problem?
Hey guys, I need a little help here. Here is what happens:
I create small websites using photoshop. I'm doing slices and then "export for the web." Once I saved the page in slices as html, as well as a folder of images, I then open Dream Weaver and start to do it how I want. But here's my problem. When I do a 2nd mobilesite, using the same slice of photoshop, I find that I get these little gray lines on the edges of my text. The display code has something to do with it? Is there a way to tell him to just resize to any phone? Window display set to 480 and everything looks good on her still but when I create a text box, it puts these small gray lines.
Sorry to burst your bubble. PS excels in graphics and special effects of edition, but it's totally lame as a generator of HTML code. Doesn't build your web pages with Photoshop. A dedicated web authoring tool to create your HTML & CSS code. PS to use for images only. And you can forget a little slices of the image. We rarely or never use them more.
If the code is not your thing, Dreamweaver is not the right tool for you.
Place you in Adobe Muse.
Nancy O.
-
What are these gray lines around my text and paths?
Hi Adobe community!
This is my first post so please excuse any forum fopahs I do.
I spent all day doing these small vector graphics for a presentation to come and just as I wrap me I started having a weird error in Illustrator. All the arrows radiating from the light bulb icon and text have a gray line, but I don't actually have a stroke applied. What happens here? Any ideas?
Thank you
Ryan
If the elements with the extra loop are grouped, verify the appearance for the Group; a stroke can be applied here and not on individual objects.
-
Mysterious gray lines on my bosses
Well, then, I'm pretty new to illustrator you can all forgive my ignorance. I created the template that I showed you in the picture and when I'm working on the model of these gray lines do not appear, but then once I got back and fill a rectangle with my boss, these gray lines appear always on top. I noticed that they change depending on how to organize my boss. (by the grid, in hexadecimal, etc.). I tried to adjust the leaders. The most frustrating thing of all is that they appear when I export the image. Help, please! Thank you!
Turn off "Smoothing" in preferences to check if the lines are gone then.
If they are, it's just a problem of screen refresh.
When you export in frame-based formats, select mode 'Art optimized'.
-
Encoding DVD timeline PP (CC2014) creating random flashing lines
Hello
I have problems of encoding to MPEG2-DVD to a fitting first Pro CC2014 files...
It is a sequence of 1080p25 about 25 minutes of time, and I'm using a custom preset output a 2-pass VBR about 7mbps. Excerpts from the timeline have not been made (yellow bars).
The encoding is going very well, but the output files contain random fine lines (1 pixel wide?), flashing intermittently until.
However, if I exit a master file (Sony XDCAM EX Quicktime) and encode using the same DVD preset, I have no problems...
Work on a new Mac Pro (2013), with all current updates.
I hope someone can enlighten us...
Thanks in advance.
OK, an update...
It seems that I still have the flashing lines with the encoded Quicktime master file. So I changed the settings of the sequence to the ProRes 422 format, rendered previews to the highest quality, and which seems to have fixed the issues encodes.
Weird.
Maybe you are looking for
-
My emial was working fine yesterday morning and now my old messages in my Inbox and trash are unreadable. See her font size, margins, spacing of lines and some show tons of letters/numbers. They messages make no sense. I learned to uninstall thunderb
-
Impossible to install Win7 on ENVY 15 t-j000
I recently bought a HP ENVY 15 t QUAD - E4T17AV It comes with Win8 and I honestly can't stand it. Trying to reinstall with Win7, I am unable to find discs to install to. I searched the devmgr win8 to get information about the SATA controller and chip
-
OptiPlex 620, cannot get into the Bios?
I tried everthing. I can't go in the bios screen to make changes no matter what I do. I can get to configure, start menu. Neither one of those get me to the bios screen. I have an Optiplex 620 running Windows 7. Any help would be appreciated. Th
-
Access controls and IP addresses
Could someone clarify something for me, make access controls restrict access to a volume of only specified IP address or allow access to any IP address of a computer that includes the specified IP address... An example of what I mean... I have a volu
-
Blue screen error caused by a driver or a device
I get a blue screen, the report says that I should update the computer to Windows Vista Service Pack (SP1) but I'm on (sp2). Ive had the added card only but the problem started not so, so I don't think it's that. If my vista is corrupt? Signature of