HP-Pavilion, NE503AV - ABA m9500t: time and battery

Similar Questions

• HP - Pavilion (15-f010dx): HP Pavilion f010dx 15 - module WLAN and battery upgrade options

  Hello

  I recently bought the HP Pavilion 15-f010dx and let me know if I am able to upgrade the WLAN module that has bluetooth? If it is possible, what drivers I need?

  This laptop came with a battery 3 cells. Are there options for a 4 cell?

  I appreciate all the help/instructions you can provide. This is my first laptop for over 6 years.

  Thank you

  -CSM - wrote:
  

  Hello

  I recently bought the HP Pavilion 15-f010dx and let me know if I am able to upgrade the WLAN module that has bluetooth? If it is possible, what drivers I need?

  This laptop came with a battery 3 cells. Are there options for a 4 cell?

  I appreciate all the help/instructions you can provide. This is my first laptop for over 6 years.

  Thank you

  Hello

  It's your model Manual

  Plug

  Supports the following battery: 2: 16 in the Manual Page

  ● 4 cells, 41 WH, 2.8 AH (number of HP 752237-001)

  Support for the following WLAN: 2, 16, 30 and 31 in the Manual Page

  ● Ralink RT3290LE 802.11bgn 1 x 1 Wi - Fi + BT 4.0 Combo adapter (number of HP 690020-001)

  Your drivers are here.

  Concerning

  Visruth

• HP Pavilion dv6-WQ685UA #ABA needs a main battery replacement and is still covered by the warranty.

  Hello

  My HP Pavilion dv6-WQ685UA #ABA needs a main battery replacement and is still covered by the warranty.

  I always thought that this laptop can't run then 1 hour unplugged but still ran about 30-45 minutes before the battery is discharged (recommended HP). A few days ago I received this message when starting upwards:

  Main battery

  Failure ID-U360G0-000624-XD0002J-C0DL03

  Product ID-WQ685UA #ABA

  Replace the main battery.

  So here I am. How do I get a new battery, sent me? Thank you!

  Hello:

  It is a forum of consumer to consumer.

  Nobody here help you with warranty issues.

  You will have to contact HP support support.

  Contact HP on the link below for the country you live.  Select the option 'technical support after purchase.

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

  Paul

• HP Pavilion dv6 1335 TX - Mute button is red all the time and not of sound through computer speakers.

  HP Pavilion dv6 1335 TX - Notebook PC (New Zealand)

  MUTE button is red all the time and not of sound through computer speakers. # LED light is 5 according to the guidelines of the manual for the identification of your component externally.

  Processor Intel Core 2 Duo T6600 CPU @ 2.20 GHz, 2200 Mhz, 2 Lossnay, 2 logical processors

  Name of the OS Microsoft Windows 8 Preview version

  Version 6.2.8400 Build 8400

  System Type X 86-based PC

  All drivers works normally and have been checked for updates that were not necessary.

  Turn help would be appreciated

  Hello

  Mute key functionality is provided by IDT Audio software, so the problem may be that Windows 8 has installed a reference driver that does not contain.  Often, the Windows 7 version works Ok, so I would try downloading and installing the following driver IDT.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48830.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• HP F3Z36PA #ABG Pavilion: Hello, I do not know my bios passwords administration and have done 3 times and now got a disabled person

  Hi I do not know my bios passwords administration and did 3 times and now got a disabled person
  Disabled code is 86008153

  Hello

  In this case, try 48683801

  Kind regards

  DP - K

• Pavilion g6 overheating and battery life

  I will have questions recently about the life of the battery of my laptop, I expected has something to do with the overheating constant, even if I clean the vents often enough and never overwork and only Dungeon it oh surfaces planes. I am at a loss at what could be wrong.

  Hello andrea9013,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that the computer is overheating and battery problems. I apologize for the inconvenience, but I'll do what I can to help you. First and foremost, please try the steps in this document: reduce the heat inside the PC to prevent overheating

  If these steps do not help, please provide the following information:

  1 the model number of the computer. If you need help to find this information, please see this site: find the model number of the computer

  2. the operating system. If you need help to find this information, please visit this site in order to determine the Windows operating system.

  3. have you installed new hardware on this computer, before the problem appeared?

  4. have you installed new software or drivers on this computer, before the problem appeared?

  Thank you for choosing the HP Forums. Have a great day!

  Mario

• HP Pavilion DV7-2015tx adapter beep and not charging.

  I desperately need help. I have a pavilion laptop Dv7-2015tx computer and my adapter is beeping and refusing to load. My battery recently failed, and so I can't turn on my laptop. I tried a hard reset, I tried to leave it unplugged for an hour and even shaking autour as suggested by some people on some forums as a solution. The light on the adapter is not on, and this problem has happened 2 times before, both times, the adapter has continued to work after about an hour to be disconnected. This time he didn't. I contacted HP telephone support, but they said that I was going to post a MASSIVE $33 phone support because it was out of warranty. I can't find an answer on this forum and want to be able to find a solution without having to buy another card. Before this problem, my laptop was turned off for a day and a night while being plugged. I desperately need help, please answer from HP.

  I'm certainly not under warranty, but I have a solution anyway. I called HP customer care again and this time I was told that it is a good, hard to solve the problem. The only solution is a new adapter, but I found a new on for under $ $20 on eBay still we made a simple diagnosis, for example, by ensuring that it was still beeps when it is plugged into the wall but not the laptop, and the fire was still out. I'm still bummed that I have to wait for delivery, but my laptop needs to go in a factory repair for a noisy fan problem, and also a radiator problem that caused my laptop to get up to 70 degrees, so it's a good time to wait.

• Show only the time and a red relief

  My watch does not show the clock face. If I press the bottom button, it will display the time and a symbol of red light.

  Hello

  Your watch has a low battery charge level and entered into mode of power reserve.

  This mode displays only the time when you press the side button, in order to keep this service as long as possible.

  You will need to exit this mode, press and hold the side button. However, you need to charge your watch first. Allow up to 2.5 hours for a full charge.

  More information:

  With the help of power reserve - Apple Support

• Home button and battery iPhone 5s

  Hello

  I have an IPhone 5, when he is in charge or on any application, the battery is very hot ideas?. Also, when I click on the home button did nothing remains on the app, I pressed it so many times and nothing that it works sometimes any ideas please? Thank you

  The battery has been replaced recently?

  Have you tried to put it to factory settings, without using the last backup? Test the function of the home button. If it works, restore the backup.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If the factory reset does not help, get the phone checked by Apple:

  Launch a service request

  Find an Apple authorized service provider

  Make an appointment at the Apple Store

• My iphone 6 does not light, I held the home button and power at the same time and no vibration or no sign of life, any suggestions as to what it could be would be appreciated

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Marley6921 wrote:

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.

• Tecra S2 - power and battery LED flashes - no start

  G ' Day at all.

  I have a TECRA S2 under XP SP3.
  Everything was fine until I went to a place of friends with her and plugged into the power supply and it lights up not at all and no LED.

  I removed the battery and then tried again and then happen to the power and battery LED flash together, but nothing else.

  Tried several times with the battery inside and out with the same results.
  I have stabilize power before removing or installing battery.

  Do not even have BIOS or a screen. I put the HARD drive in a caddy, and it's accessible.
  See you soon
  kb3500

  > Everything was going well until I went to a place of friends with her and plugged to the power
  Did you use the right adapter?

  To be honest, it looks like a malfunction of the power supply motherboard maybe electronic issue of power.
  the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.

• HP - 15 laptop: the estimated time to battery is incorrect!

  I recently got a new HP 15 notebook and I noticed that the estimated remaining battery time acted strange. When the battery is at 99%, the estimated time is 5 hours but 98%, 7 hours; and it's not always 7, I saw 9 as well. The point is, my laptop was caused the range estimated by a draw.

  Hi @Mannat

  Welcome to the HP's Support Forum!

  I understand that you are facing problem with the estimated time of battery.
  I'd be happy to help you.

  Please follow the steps below
  Step 1: We will try everything first uninstall and reinstall the software of battery.
  Step 2: Click on Start and type device in the search for field, and then select Device Manager.
  Step 3: In the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose Uninstall.
  Step 4: WARNING: Do not remove the Microsoft AC adapter driver or any other compatible ACPI driver.
  Step 5: In the taskbar from the Device Manager, click on search for the hardware changes.
  Step 6: Windows will scan your computer for hardware which has not installed the drivers and will install the necessary drivers to manage the battery power.

  I also recommend the battery calibration.

  I found a few Documents Support HP's wonderful for this.
  Calibration of the battery
  Uninstalling and reinstalling the battery software

  Let me know how it goes

  * Click on I accept as Solution on an answer that solves your problem to help others *.
  By clicking the Thumbs-Up is a way to say - thank you! ******

• Equium M50-164: Question about timer use & battery fan

  Hello!!

  Just put your hands on my laptop equium m50-164 today and I wanted to clarify a few issues

  first of all,

  I flashed my bios with the latest version and after restarting, fan kicks at full power and has not extinguished until I put the laptop in standby mode, this seemed to fix the problem but fan seems suddenly in much more than compared to before, fortunately the fan isn't the one 100% , but more like 15-20% every 30 seconds or one minute then goes into silent mode the fan does not reach 100%, unless I have do a reboot :),.

  I know the fan will accelerate faster based on the use of the processor (thermal) etc. but is this normal? I talked to support and they wanted me to have an immediate replacement, but I said that I would wait a few days to see if she could calm :)

  and finally looking at the electricity meter and other software tools there seems to be no calibration of the battery, with previous laptops, I noticed that numeric calculations are made based on the use of the battery and time [i.e. a timer] but with this laptop that I kind find a timer - I would of thought tha any computer laptop has this facility today!

  any advice would help

  see you soon

  Ephid0r UK

  Hi ephid0r

  If the Toshiba service makes an instant replacement if you should take it.
  Maybe there's something wrong with the hardware or software.

  But as Feliks has suggested, you must first reinstall the Toshiba Power Manager.
  This utility is responsible for the CPU and the cooling module activations.

  PS: The time of battery life indication occurs if you move the cursor over the icon of standby power.

• How to disable the Date/time and the side Pop out window of Windows 8.1

  When I move my cursor/arrow on my touchpad on my laptop 11 flow through the office, or sometimes on a web page, for example, the date and time pop - up down to left and the research / action / start / devices / Setup window appears on the right side of the screen. It makes me crazy. How can I disable this feature of the software?  If I need them, I can simple enter the windows on the bottom of the screen icon. In its current form, it is playing all the time and I want to turn it off. Thank you.

  HP PC laptop flow 11 model: 11-d010nr, product number: K2L95UA #ABA, file system NTFS, Intel Celeron CPU N2840 2.16 GHz, RAM 2.00 GB, 64-bit x 64 based processor, 8.1 with Bing Windows operating system, HP USB 3.0 flash drive 128 GB, Sandisk Ultra SDHC 32 GB FAT 32 memory card

  Hello @BubuBaby,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Notebook PC 11 workflow and settings of Touchpad not working not properly. You can disable the popup of charms by right-clicking on the desktop go to properties. In the properties of Navigation window and the taskbar, click the Navigation tab and uncheck the box - when I point to the upper right corner, show the charms.

  Here is a document on how to troubleshoot the Touchpad, if you need it.
  
  If you proceed to the section setting of TouchPad pointing the sensitivities it should help solve the problem. Enable or disable individual gestures by clicking the check box next to each item. A check mark in the check box indicates that the gesture is turned on.
  
  Hope this fixes the Touchpad settings.
  
  Thank you.

• Time and Date on Portege 3490CT...

  Hello.

  Is it possible to set the time and date settings in the BIOS somehow?
  I'm tired of setting the time and date on my windows every time that I reboot or turn on my computer.

  I hope someone can help!

  Sincerely,

  Daniel A. Johansen aka SiLverFerret

  Hi Daniel,.

  If you have set the date and time every time that you start Windows, so I think that your CMOS battery has expired. It is a small battery used only to keep the parameters of the BIOS (including date and time).

  Normally, the CMOS battery recharges when the laptop is connected to the power supply.

  I would recommend that you contact a Service partner to get your replaced CMOS battery (it is normally attached to the motherboard).

  HTH