HP Pavilion Notebook 15-e030tx: USB 3.0 does not work on HP Pavilion 15 - e030tx Notebook PC

Similar Questions

• USB 3.0 does not work on HP Pavilion 23 g010

  USB 3.0 does not work on HP Pavilion 23 g010. Can not find the driver from HP site that works. Can anyone help please because it is a new computer? Windows 8 is installed, but owner downgraded to Windows 7. I tried the drivers that are supposed to work and the said error box "this computer does not meet the minimum requirements for installing this software"... don't know what to do but would appreciate greatly any input...

  Hello:

  Your model has an AMD chipset and processor.  Therefore, the Intel chipset driver will not work.

  First, install the AMD chipset driver and restart.

  You want to download the 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If that does not install the USB 3.0 drivers (see the file they are included), then download and install both of these drivers and USB 3.0 will work for sure in this way.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If there is any other drivers you need for this model, please let me know.

• USB 2.0 does not work in bootcamp Windows 10

  Hello

  I try to use my USB 2.0 USB drive on my MBP 13.3 "in bootcamp Windows 10 and it does not appear in windows Explorer. The USB key is displayed in the device however Manager. I tried my hard drive that is USB 3.0 and it works fine, but the USB does not work. I have tried many different solutions and none seem to work including physical relocation and replacing the USB name i.e. H: U:. In disk management, the device is there but says "no media" below.

  Someone at - it suggestions as to how I can get the USB appear in Windows Explorer and access the files?

  Bravo to all the answers in advance.

  the device is considered that the format is not. In some cases shaped on the Mac in Fat32 or ExFat is not readable under Windows. Reformat the Windows Fat32 or ExFat Device Manager device, it will destroy the data and mount the drive. In turn the unit may become unusable which can occur over time.

• The right side and express USB card reader does not work

  Hello

  The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

  Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

  I can´t find the card express under system reports reader.

  I ran a test for diagnosis of Apple without any problem.

  I have reset the SMC & LANDAU.

  I reinstalled the operating system without success.

  Anyone who knows how to fix this?

  MacBook Pro with OS X El Capitan 10.11.5, Retina display

  Can someone help me here, please!

  Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• Portege R500 - keyboard USB Legacy support does not work

  I have a Portege R500-124

  I use it to dock in the office and the lid is closed, so I need to enter a password for DriveCrypt and generally control the boot/BIOS from a USB keyboard. But no matter what I set the setting that is inherited from the USB in the BIOS, the USB keyboard does not work. I tried the keyboard connected directly to the R500 when undocked and it's all the same. I also tried BIOS 1.6 and that's all the same.

  USB keys are working and I can boot from them, but no work of measures (for example, F12 to choose the BOOT device) keyboard - the R500 doesn't seem to have the functional USB keyboard support until an operating system (Windows or Linux) has started.

  Any ideas?

  Ian

  > .the R500 does not appear to be the functional USB keyboard support until an operating system (Windows or Linux) has started.

  I can't confirm this, but I'm afraid you're right about that.

• Satellite L50 - C - 1 L 2 - USB 3.0 does not work correctly

  Hi, the new Satellite L50 - C - 1 L 2 has maybe a problem of USB 3.0. All the componetens that I connect to USB 2 works correctly. But some of these plugged into USB 3 doesn't work. A driver from Microsoft for USB 3.0 extensible Hostcontrolller v 1.0 is installed, no more. I cannot find any USB 3.0 driver in collection of driver of Toshiba. What can I do? They are a special USB 3.0 driver?

  Greetings, Michael

  im not toshiba but tell me how you know that your usb sata 3 do not work, you should have a usb 2.0 port and two usb 3.0 ports, if you use the usb 2.0 to usb 3.0 port device you will get only 2.0 speeds. USB 3.0 is backward compatible with usb 2.0 even peripheral id usb 3.0 according to manufacturer and specs of the device and how to use it. lets say spec is of high quality and again then you transfer files small speed should be fast that belong to 3.0 speeds but if you transfer large files then your currency becomes warm or hot and gets corrupted performance speeds down you can even get up to usb 2.0 speed and maybe that's why you think that your USB 3.0 ports do not work correctly , I hope that its clear things that worry you.

• Satellite Pro L20-212 - USB 2.0 does not work

  Hello

  I own a * Satellite Pro L20-212 *, * Windows XP (SP2) is installed, but USB2.0 does not work *. I see nothing on USB 2.0 in the Devicemanager and the speed of the USB 2.0 devices attached is at the level of the USB 1.1.

  I don't know what information is needed to help me with this problem as it should normally work on my laptop (and I know that the laptop has USB 2.0 ports).

  What I have to install a special driver to use USB2.0 or is there any software on my laptop that I need to activate?

  Thank you very much
  Frank

  Hello

  Did you install the image on the Toshiba Recovery CD? This image contains the Windows operating system, Toshiba drivers and additional utilities. After installation, everything should work fine, and also the USB ports should work also.

  The USP ports, you can find in Device Manager in the serial BUS controller universal section. Open the tree and check if there is some yellow exclamation points.
  Then try to remove the Device Manager, the controllers and the USB hub and restart the laptop. After restarting again the OS should recognize USB controllers deleted again.

  I hope that this accelerated procedure will help you.

  Greetings

• USB 3.0 does not work

  Hello

  I have a laptop Lenovo B50-45. The two ports USB 3.0 on the left side does not work, even if I installed everything I found on the "Drivers" of the company's Web page.

  How can I work?

  Try to install the latest drivers for usb 3.0 chipset support

  http://support.AMD.com/en-us/download/mobile?OS=Windows%208.1%20-%2064

• HP 110-243w downgrade to windows 7 64 bit hp usb controller driver does not work.

  I finally got the graphics drivers to work but now can't seem to find the driver for the usb controller. the one on the hp site does not work. work of USB, but I'm assuming that this id for the s 3.0 I have not tested because I have and devices usb 3.o. but he has a! in devie Manager. Thanks in advance.

  Hello:

  Download and install the AMD chipset drivers and restart.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If for any reason any USB 3 drivers still don't get installed, then download and install these drivers and reboot.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• USB 2.0 does not work on usb 3.0

  Just bought a logitech wireless controller. It is USB 2.0, but my Dell running Windows 8.1 has 6 USB 3.0 ports and does not work. Troubleshooting I tried just said old logitech controller will not work. Please help thanks

  This utility may be correct then.  Have you checked the site Web from Logitech for this model number see if it is supported on Windows 8.1?

• Caused USB audio microphone does not work

  I had a finished project and went to show to a friend. I got a new Blue Yeti USB microphone plugged when I opened the program. Now no audio cannot be heard through my speakers, and in the "audio" section, he said the microphone and the speakers (does not work). Need help please, I have put hours and hours into this project, and don't want it to be for nothing.

  You must go in its input/output of your operating system controls and make sure that you had used the 'standard' output is checked... sometimes connect a USB microphone can get wobbly system. If your standard output work... then go into the preferences panel / Audio Hardware in PrPro as shown below...

  

  My system is using the 'peripheral' Ms. class, but many work better using the Asio option if it's available there.

  Below, also check your default output device..,.

  Neil

• HP Pavilion dv7-6166nr USB 3.0 does not work

  My two USB 3.0 ports left do not work. In Device Manager it can't find the drivers for them.  I searched the forums, tried other drivers, tried the drivers for the latest drivers from Renesas USB 3.0 Host Controller and those who do not work either. None of the drivers that I download seem to work including those listed for my laptop on the site Web of HP.com.

  Any help would be great, thanks.

  I also tried: USB3.0_allOS_2.1.28.1_PV.exe with no luck.

  Hello:

  Install the AMD chipset drivers and restart. You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• Toshiba Canvio USB external drive does not work well

  I hope this is the right forum for this question
  Please help me with my external hard drive, Toshiba Canvio usb e05a032bau2xk.

  It worked fine, but not now.
  My OS is win xp, sp3, home ed.

  The Toshiba drive is more steady and is almost impossible to work with now. I checked with Device Manager that says the drive is working correctly.

  I've uninstalled and reinstalled the driver, cleaned and Defrag the disk (when I was able to access) but it works still very badly now!

  What else can I do to find out what is the problem with this Toshiba drive and return it works reliably?

  Thank you
  Jim

  Post edited by: jimrich

  Somehow I'm the drive working again, I went in 'tools' and all reset setting 'default '. Now the drive works, but I transferred some data on the hard disk, just in case. Wish me luck on this...
  Jim

  > Somewhere, I'm the player works again, I went in 'tools' and all reset setting 'default '. Now the drive works, but I transferred some data on the hard disk, just in case. Wish me luck on this...

  Thanks for the comments, I hope that the reader should work correctly now

• Equium A300D - 16 c: USB/eSATA port does not work after disasembling

  Hi all

  I have the above machine which worked very well, so quite extraordinarily hot.
  I decided to open it and clean the dust, etc. of radiator and nowhere else that had gathered inside the case. All good, I thought...

  However, when reassembling it, 2 usb ports left (including one combined USB and eSATA) have stopped working!

  I could understand if it were those on the right who are on a daughter card, (for example if I forgot the cable), but they are part of the motherboard. I checked by plugging in various devices that work in good, but not the left.

  Check between the + and - ports with a multimeter, I get ~ 5V from the right and nothing from the left, even if at some point, I register 0.3V.
  I tried the network port that is correct, but cannot test the eSATA part as I have nothing to connect.

  Anyone has any idea what this could be?

  Thanks in advance!

  ige87

  > Control between the + and - ports with a multimeter, I get ~ 5V from the right and nothing in the left
  This means that there is no power on led USB port.
  To be honest, I have no idea what you did during the computer laptop disassembly procedure but it seems that damage you something on the motherboard.
  For me, it is a plausible explanation.

  Just a tip; check if eSATA is enabled in the BIOS.

• HELP WITH LINKSYS WUSB100 attached to the USB EXTENSION CABLE - does not work

  Hello team,

  I own a LINKSYS WUSB100 usb adapter I used for my wifes desktop... I can connect to my home network to surf the net, but the signal is weak...  I decided to buy a 25' EXTNESION USB CABLE, which comes with a MALE AND FEMALE ends... I simply PLUGGED the cable on my DESK and PLUG the other end of the USB cable from the LINKSYS WUSB100 card and waiting for the COMPUTER TO RECOGNIZE the card without any problems... To MY SURPRISE, the computer would not have hired the LINKSYS CARD... He said "the search for new deivce, peripheral found but not hired"(Something like that)... in any case the desktype sees the device, but willl not hired there as a LINKSYS and I cannot search FRO all networks... As soon as I unplug the LINKSYS of the cable and plug it into the USB port of the computer - BAM my network comes up with a weak signal... Can anyone understand this? My cable is too long?

  Thanks a lot for all inpiut!

  DOn

  dax0007 at hotmail

  There is a standard length for the cable. It will not work with 20 foot extension... Try the cable up to 3-4 feet short and check.

• USB Flash drive does not work with Windows 7 Pro 64-bit

  I have several USB thumb drives, some of them do not work when I plug them in while others work very well. By experimenting, I reduced the problem with the 64-bit Version Windows. All of these USB keys works well in my other computers that have 32-bit installed and also even computer with the 32-bit version installed on different hard drive. All of these thumdrives are detected immediately and works without a problem. The 64-bit version, I have uninstalles and reinstalled readers, drivers updated for readers and controllers USB chipset, reasigning letter drive without a resolution of the problem.

  It is interesting to know that this problem only occurs with some discs that I (like Ativa 4 GB, 4 GB generic and Verbatim 4 GB). While I discovered that you can do all the nonworking day thumdrives work once if you shutdown computer and plug the thumdrive into the USB port and the computer to boot, boot time is longer than usual and when it is operational in 30 to 45 seconds drive appears in the list of devices and you can read, write and format normally without any problem to experiment. When you pull chase him and reconnect to USB port after 10 seconds same problem appears aggai. First of all, you get the message that the disk must be formatted and if you try to format you will get a message that windows cannot format the drive. If you try to access the drive, you get message that Drive is not accessible. If I take this player and plug it from 32-bit without problem, you see all the files in the drive and are able to read the writing and the format is normally.

  I'd appreciate if I am able to get an answer as a way to solve the problem.

  Pavan

  When you disconnected the battery of the laptop, you did, be sure to press and hold the power button for about 10 seconds?  This causes the rest of completely discharge power.

  This tip came in practice more than once in my experience.   ^_^