HP Pavilion Notebook 15-e078sa: could not load the Driver USB controller

Similar Questions

• HP deskjet 6122 could not load the driver on the CD, he says is no longer supported

  Original title: printer HP Printer driver

  I have an old printer of HP deskjet 6122.  It works very well.

  However, when I plugged in a new desktop computer, I could not load the driver for the CD.  He said that it is more compatible.

  Later, I learned that the driver for HP 990 will work as a substitute.

  When I go to the HP site, there is no help as it attempts to identify my printer before you download the driver.  It identifies my printer 6122 as obsolete and will not load the driver down 6122 or 990.

  Where can I go to download the HP 990 regardless of HP driver?

  It's the HP 990c driver you want?

  If so have you tried selecting the update of Windows while in the Add Printer Wizard?

  It will take more than 5 minutes to get an updated list of printers and the 990c is.

  You can get them here too:

  Drivers HP for Windows update

• Could not load the driver for Teredo Tunneling Pseudo-Interface

  Hello

  Does anyone know how to fix this problem (Vista) Business

  Product
  Teredo Tunneling Pseudo-Interface

  Problem
  Could not load driver software

  Description
  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

  Signature of the problem
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: * TUNMP
  Configure the class GUID: {4d36e972-e325-11ce-bfc1-08002be10318}
  The PnP problem code: 0000000-a
  Driver name: tunmp.sys
  Driver version: 6.0.6000.16386
  Driver date: 02/11/2006
  OS version: 6.0.6000.2.0.0.256.6
  Locale ID: 2057

  Additional information about the problem
  Bucket ID: 12121968

  Concerning
  Dave

  Hi Dave

  Can you please give us more information on your laptop and what is happening exactly?

• HP Pavilion Notebook - 15-p164: could not find the list of drivers

  I get the message "cannot find the list of drivers for your product.  Since the installation of the driver for my GPU, I get the BSOD "thread stuck in device driver".  I make sure that I have all the correct drivers.  Thank you.

  @Aljoli

  Two systems in this category...

  HP Pavilion Notebook - 15-p164ca (ENERGY STAR)

  and

  HP Pavilion Notebook - 15-p164nr (ENERGY STAR)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Code 39. Could not load the driver for this hardware device. USB, Audio and Ethernet. Œuvres's driver CD.

  Hello this is the first time I posted about people here so sorry if I get this thread a bit messed up, but to cut a long story short, I plugged in my USB iPhone and then the iPhone has crashed, so I had to uninstall iTunes, to complete the unistallation I had to reboot my computer on that next time that my computer started. My Usb drivers, Audio and Ethernet were no longer works. I tried a lot of thing to solve this problem, I downloaded the drivers and has moved across on a dvd and has not worked, I reinstalled the drivers, didn't work and I also moved my ram in a different solt because a friend told me that this could work. It did not help. I took a screenshot of the problem and transferred to it via CD.

  http://i30.Tinypic.com/ae32vk.PNG

  http://I27.Tinypic.com/2w4jy14.PNG

  When I put my driver of motherboard of the computer disc he also says 'Don't detect any good point. "

  I don't know what to do with this issue but it's really bugging me, any help would be Grateful.

  Thank you.

  I am currently using a:

  Card mother ASRock G31M-GS

  ATI 5970 Gtx graphics card

  On board sound

  2 GB ram cheap

  Windows 7 64 bit

  I just noticed that I posted this in the section wronf my bad for it.

  Zippers, I mentioned would be just compressed the executibles (EXE) versions. If you
  has ran versions EXE of the drivers for the NETWORK card and WiFi and were there any error messages?

  Download the Intel chipset drivers and install them - restart and then try the others.

  If no joy repeat the repair facility.

  Drivers for your computer would come from the machine system and various device manufacturers
  as Intel.

  You need to check on the site of the manufacturer of the system for your model, so you can get the basic
  drivers for the system. Be sure to get and install the Intel drivers for your chipset first.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error code 39, could not load the driver for my cd/dvd device.

  I tried the advice of troubleshooting, uninstalling and reinstalling, but it does not fix it.  I think that the driver on my computer is corrupted.  I can't get the original driver from the CD provided with the computer... because the CD player does not work... so... can Ow I get the driver to try a new?  And exactly how to load this driver?

  Here are the specs of the drive: TSST corp DVD + RW TS-H653B

  Driver version: 5.1.2523.0

  Please help, trying to install a new printer and cannot do without my CD drive... ack!

  Thank you

  Hi RhonBB,

  You can follow this link & check if the problem persists.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• OfficeJet J4550: Could not load the driver for the WIN10 - installation hangs

  Updated my Dell XPS to WIN10. I tried to upgrade the driver for my J4550 but installation hangs at the beginning of the installation process, "control systems".  When I tried the download, the old files from HP devices detected HP program and deleted. Now my computer does not even recognize the OfficeJet when you plug into the USB port.

  Need help why computer does not recognize the printer no matter what I do and how to get the computer to download the driver.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, run the following tool:
  FTP://ftp.HP.com/pub/Printers/datfileremover/installdatfileclean.exe
  Then, run the Setup file and check all difference

  Kind regards
  Shlomi

• Could not load the driver for scanner epson SX215.

  I bought a new Epson printer which has a scanner, the only thing that I'm unable to install is the scanner driver.  I am running windows vista 32 bit.  I tried to download the scanner from Epson and the drive site, but no luck.

  Hi Baily474,

  Thank you for visiting Microsoft Answers.

  (a) what exactly happens when you try to install the drivers scanner? Do you receive an error message?
  (b) do you remember to make changes on the computer prior to this problem?

  I suggest to perform the clean boot and try to install the drivers for the scanner software. It will start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135.

  Reference:

  Add or remove a scanner
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-scanner

  The problems of scanning
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion dv7-6178us: could not load the driver download page

  I had to reinstall my windows has been corrupted, so I was trying to get the drivers from the support page

  http://support.HP.com/us-en/product/HP-Pavilion-dv7-6100-entertainment-notebook-PC-series/5082216/mo...

  However, once I select the operating system, it gives the symbol of loading and never moves forward. I waited half an hour without result. I tried to look for other laptops and their pilot pages loaded immediately, so I don't think it's on my end... is there a problem with the page?

  Hello:

  For now, you can use the Spanish support pages that seem to work very well...

  http://support.HP.com/es-ES/product/HP-Pavilion-dv7-6100-entertainment-notebook-PC-series/5082216/model/5119038/drivers

• Could not load the driver class: com.microsoft.sqlserver.jdbc.SQLServerDriver

  I get this error when I run my application jsf on jdeveloper11g.i get success when I test my connection to database using the database browser.

  Put the library jar file in the lib under DefaultDomain folder in your installation path IntegratedWLS if running in the IDE.
  C:\Documents and Settings\user\Application Data\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\lib-
  or
  C:\Users\user\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\lib

• Could not load the profile user (XP OS) and lost files

  Hello

  I tried to connect to my help my profile on XP last night and message box came up saying that my profile cannot be loaded.  I am currently in the temporary profile that was created automatically by the system for this profile.  It seems that files on another profile missing now and I can't get back my original profile.  This profile has been my administrator profile that I created to replace the supplied profile admin system.

  I checked the event log and I see an error event ID: 7026 "could not load the driver system or next start: Lbd." recently, I used the 'delete' function to get rid of one or two programs but was able to connect after you remove these two programs, so I don't think that was my problem with profile.

  I've seen a few comments on the forums, but they are especially for non XP OS.  Is it possible to retrieve the profile and files.

  Please notify.

  Thank you for your time.

  Recovering from a corrupted or damaged user profile is a relatively simple operation.  Follow the instructions in the following article:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• Could not load the Norton power Eraser

  Installed Norton Security. Everything works well except a pop up window that says error 5013,3.

  Following the instructions I downloaded Norton Power Eraser. When you are finished, the pop-up with the addon window said I need a newer version of Power Eraser and "click here".

  No mater how many times I try, could not load the new version.

  Don't know what I was doing wrong before, but when the pop-up window came this time it worked.

  I'm glad that it worked, but I wish I knew why.

• I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

  I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

  Hi Leif,

  Where do you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

  http://get.Adobe.com/reader/?promoid=DINRS

  Method 2: If the problem persists, perform a system restore and check if that helps.

  How to restore Windows XP to a previous state

• Locking down system and now get error 'Could not load the profile user and loading of temporary user account' when you try to open a session

  When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.

  Original title: Temp user login

  Hi indhru,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Try the step after the connection to the temporary account below.

  1. Click on the Start menu.
  2. Type Regedit in the Run dialog box, and then press enter
  3. Access
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  4. There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
  • Make sure that the name of the key are not ends in ".bad".
  • Make sure the RefCount value is 0
  • Ensure that the status value is 0

• Windows could not load the profile of the user

  When I start my PC, is to show the windows user environment could not load the profile of the user, but you connected on default profile for details of the corrupted system registry.

  Please reply me with the solution that I use win xp sp2

  Hi citycc,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. are you able to connect to Windows?

  4. how many accounts do you have on the computer?

  See the Microsoft article below and check if it helps.

  Error message "Windows cannot load your profile because it may be corrupted" when you try to log on Windows XP

  http://support.Microsoft.com/kb/318011