HP Pavilion Notebook 15-p050ca: graphics driver error message started after the upgrade of Windows 10 model installed on #: G6U13UA #ABL

Similar Questions

• HP Pavilion dv6 Notebook PC: AMD graphics driver does not not after the upgrade Windows 7 to Windows 10 online

  Microsoft snuck in as the custody of my 3 weeks ago and started the upgrade my operating system Windows 7 to Windows 10 without my consent while I wasn't in front of my laptop. When I noticed what was going on I have reluctantly let the process take its course. I have encountered in many problems. The main source of problems, it seems that graphic of the AMD Mobility Radeon HD5000 series laptop drivers are no longer works, apparently supported by Microsoft drivers.

  AMD gave 2 driver updates: 15.7.1 and Crimson Edition 16.2.1 Beta catalyst.

  I installed 15.7.1 but still had no service message.

  I then installed 16.2.1 always without result.

  Should I give up to get my AMD drivers working and settle for what Microsoft has done that has mucked up the graphics on my HP DVD and Vivo TV apps?

  Hello Grayson,

  It is very likely that you upgraded your computer to windows 10. If it is less than 28-30 days ago that upgrade, would have a chance to go back to windows 7. This is possible by clicking on the small papir in the right corner below only 'no new notifications or new notifications' If your only and press on all the settings-> press update of security &-> in the left, you should find one called "Recovery"-> under that with that you should have a return to windows 7.

  If you return to windows 7, you can block the forced update by using this link: http://www.pcworld.com/article/2998967/windows/how-to-block-the-windows-10-upgrade.html

  hope this helps you.

• AMD Rrdeon HD 7400 - models of HP pavilion G6 1117tx graphics card now works correctly after the upgrade of windows 8 Pro.

  Hello

  I have hp Pavilion G6 model 1117tx.  I have upgraded from windows 7 to windows 8 Pro. After the upgrade, I observed that on right click option, I didn't fine CCC and Configure with the graphic option switachable is missing. so please help me how can I solve DIF relationg AMD redeon 7400 grphic card and intel option hd switchable hd 3000 series grphic.

  Help, please...

  Patel Mounal

  (1) have you read full sheet of your Hp pavilion?

  (2) otherwise average, first downlaod read the documents at the bottom of link

  http://h10025.www1.HP.com/ewfrf/WC/manualCategory?CC=US&DLC=en&LC=en&Product=5118185&Query=HP%20pavilion%20G6%201117tx%20&Tool= &

  (3) these manuals may be contains details of compatible video graphics cards

  sufficient capacity

  (4) and check that your graphics card is compatible with the motherboard and current operating system

  (5) read the technical specifications of AMD Rrdeon HD 7400

  http://www.AMD.com/us/products/notebook/graphics/7000m/7400m/pages/Radeon-7400m.aspx#2

  (6) see amd graphics software drivers FAQ, see link below

  http://support.AMD.com/us/KbArticles/pages/AMDGraphicsSoftwareandDriversFAQ.aspx

  (7) downlaod and install AMD autopilot below link detection tool

  http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

  (8) download and install the latest drivers from AMD catalyst HD 7000 series, choose current

  operating system at the bottom of the link

  http://sites.AMD.com/us/game/downloads/pages/downloads.aspx

  Restart your system

  Guilbert

• Driver video error Code 10 after the upgrade to Windows 7

  Upgrading to Windows 7 & have the following error messages:

  Standard VGA graphic card work not only can not start (Code 10)

  Converter USB - LAN has no driver

  SMA 851 X USB to Fast Ethernet Adapter

  During the initial installation of Windows 7 the monitor works but when Windows upadates are applied it gives the messages described above. Everything worked then on Vista... but also Vista would work!

  Dell does not have a driver for a monitor solution - 2 years. I was running as an extended desktop on a Dell Inspiron 6400 with 2 GB of RAM, new 500GIG Hitachi hard drives.

  Also cannot load the Office Small Business 2007 Business Contact Manager.

  Hi remaxguy,

  See the following article on setting error Code 10:

  http://support.Microsoft.com/kb/943104#appliesTo

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Vista Stop error message: 0XC012001D after the installation of Windows updates.

  Original title: vista stop working

  Hello

  I need help on vista, because I update and restart and stop working and appear this error code:

  !! 0xc012001d! Registry\Machine\Components\DriverData...

  Hello

   

  
  1. remember the number of the update you have installed?
  2. could you give us the exact error message?
  3. Once you get this error message? Are you able to boot to the desktop?

   

  Method 1.
  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.
   
  Step A.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   

   

  Method 2.
  Best thing you can do is to perform a system restore just before where the problem occurred.
  I have listed a few articles that explain the system restore in Windows 7.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Thus, the article above is applicable to Windows Vista.

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Corsair Flash Voyager GT 32 GB USB 3.0 thumb drive does not work after the upgrade to Windows 8 Pro

  Hello

  Since the upgrade of my Windows 7 Ultimate SP1 x 64 Windows 8 Pro x 64, my Corsair travel GT 32 GB USB 3.0 Flash USB key no longer works when plug it into my USB 3.0 port on my laptop. I get an error that the "peripheral last USB connected to the computer has malfunctioned and Windows does not recognize it." I looked for someone with a similar problem and came across this answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Sony-microvault-USB-30-8gb-thumb-drive-not-working/8815a9bd-ee62-41EC-8116-a2a03d6f2bbf

  I tried the solution (method 1) on this page, however, Windows reports that it was unable to solve the problem of equipment.

  Is there anything else I can try to solve this problem? The USB key works in the USB ports 2.0, and it worked in the USB 3.0 port when you run Windows 7 Ultimate SP1 x 64.

  Kind regards

  Andreas Ball

  Hey, I contacted Corsair about this, and they say that it's a driver problem in Windows 8 and I need contact my laptop computer manufacturer for the latest drivers for it, but even if my manufactuer are full steam advertising upgrades of Windows 8, they say they do not support it fully yet...

  The host controller my laptop use of USB 3.0 is 'Renesas Electronics USB 3.0 Host Controller'.

  Through Googling, I noticed others have had problems with this host controller in Windows 8, and I can't seem to find a solution for it yet.

  Unfortunately, windows 8 compatibility is not listed then try to install the installer of renesas usb 3.0 in windows compatibility mode 7.

  complete list of supported products and the operating system:

  http://eSupport.Sony.com/us/p/SWU-matrix.pl?upd_id=6382

  Renesas Electronics USB 3.0 Host Controller®
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCL213FXB&upd_id=6382&os_group_id=6

  Download here: http://s02.download.sony.com/US/pc/RNDUSB-00241028-0042.EXE

  What does this do?

  This utility installs the originally shipped version of Renesas Electronics USB 3.0 Host Controller driver.

  This driver also solves the yellow exclamation point error that can appear in the device as "Universal Serial Bus (USB) Controller" Manager that indicates that the driver is not installed for this device.

  The products and operating systems (view all...)
  Model:
  VPCL213FX/B
  Operating system:
  Windows® 7 64-bit

  IMPORTANT: This file is only for use with the identified models. Not all models are sold in all countries.

  Important notes

  During the installation of this file, be sure that you logged in as an administrator or as a user with administrative rights. To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. It is strongly recommended that you print these instructions for reference during the installation process.

  Download and Installation Instructions

  To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. Download RNDUSB-00241028-0042. EXE a temporary of the file or download directory (Please note this directory for reference). Go to the directory where the file was downloaded, and then double-click RNDUSB-00241028-0042. EXE file to start the installation. The "User Account Control" screen, click 'yes '. On the screen "Select Country", select the country for the installation and then click on "next". To the "Renesas Electronics USB 3.0 Host Controller version 2.0.26.0" screen, click "next". The "License" dialog box, read the contract, then, if you agree, click "I agree" to continue the installation. The "Complete" screen, click on "Finish". Installation of the Renesas Electronics USB 3.0 host controller is complete.

• Pavilion HDX 16: Windows 7 does not start after the upgrade to Windows 10

  Hello

  I have a system to dual-boot with windows 7 and ubuntu (with Windows 7 and NeoGrub Bootloader Windows Boot Manager).

  Recently, I upgraded from windows 7 to windows 10 via free upgrade offered by SM. However, I didn't like windows 10 and tried to upgrade to windows 7 by the following settings-> update of the security & -> Recovery-> Go Back to Windows 7.

  After the long process of decommissioning, cannot start windows 7 and the "Startup Repair" tool began to run. However, he could not solve the problem. Other recovery options 'system restore' and 'image system recovery' is not such that it could not find any restore point or the image created previously (I'm sure it were created before upgrade restore points).

  So, although I can boot ubuntu without any problem, I can't start windows 7. After the "starting windows" screen, I get the blue screen (a problem has been detected and windows has been shut down...).

  I intend to use the DVD to install windows 7 for repair, but

  (1) I don't know if I can boot from the CD because it is a dual-boot configuration

  (2) I'm afraid of losing work ubuntu OS.

  I appreciate if someone can help me find my Windows 7. I thank very you much for your time.

  Sorry, but there are a lot of reports on forums of Win10 the option of GoBack does not always work correctly.

  You should be able to boot properly from the same DVD of Win7 if you dual-boot with Ubuntu, but be aware, if the startup repair works (you may need to run three times), it will replace the link to start Linux in the MBR and after that, the machine starts immediately to Win7.  You will need to reinstall GRUB to get Ubuntu boot back.  You may be able to fix the boot of Ubuntu using repair boot: Boot-Repair - Community Ubuntu Documentation

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Missing graphics drivers after the upgrade to Windows 8?

  Hey guys,.

  I see several people on the forums of the problems with graphics drivers not installed after the upgrade to Windows 8.

  The first step you want to take, make sure that the laptop is supported by Windows 8.

  You can go HERE and see if your laptop has been tested for Windows 8. If she's GREAT!

  Now, if you're still looking for the graphics drivers according to the processor you have there are several places to look.

  First of all, you want to check the HP website and your product type # in the next selection > and then select the operating system > click Next > and look under the section that says "Driver - Graphic" and start the download.

  If you still don't see the driver referred to in this article, you can see one of these sites according to what processor you have.

  INTEL

  AMD

  Also, if you have Windows 7, you can still follow this post.

  THX

  I hope it's useful!

  THX

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• Graphic AMD redeon HD 7400 does not work after the upgrade to windows 7 to windows 8 Pro

  Hello

  I have hp Pavilion G6 model 1117tx. I have upgraded from windows 7 to windows 8 Pro. After the upgrade, I observed that on right click option, I didn't fine CCC and Configure with the graphic option switachable is missing. so please help me how can I solve DIF relationg AMD redeon 7400 grphic card and intel option hd switchable hd 3000 series grphic.

  Help, please...

  Patel Mounal

  Hello I found the correct answer to the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/AMD-rrdeon-HD-7400-graphic-card-HP-Pavilion-G6/f5a35f2d-6ffb-4863-a80b-bbe61f458c98?TM=1355725442747&LC=16393&auth=1

  Patel Mounal

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• HP pavilion g4-1304au notebookpc - HARD drive is not found during the installation of Windows XP

  name of the product - hp pavilion g4-1304au notebookpc

  product no - #ACJ D4X79PC

  processor - AMD A4 - 3330 X

  During the installation of windows XP, it shows an error that the "mass storage is not recognized.

  Please give me Slipstreamer pilot for the specification above.

  You can follow the instructions in the following document, which allows you to install Windows XP on your laptop.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=130&prodSeriesId=5046252&prodTypeId=321957&ObjectID=c01092639

  Also make sure that you install the last Windows XP SP3 for laptops and get into the BIOS and change a SATA AHCI to IDE / legacy mode.

  Also, if there is a parameter called "Secure Boot", disable it.

  I hope this helps.

• After the upgrade to Windows 7, Windows 8, audio lost, receives errors chipset, bluetooth, and PnP driver problem

  Original title: Intel (R) B43 Express Chipset

  Since I updated to windows 7 to windows 8 pro, I lost all audio on my laptop. I tried to update the driver audio, but all without success. I get these errors:

  (1) "Intel (R) B43 Express Chipset (Microsoft Corporation-WDDM 1.1) has a driver problem"

  (2) "stereo Bluetooth has a driver problem"

  (3) "problem with PnP devices"

  (4) ' Windows Update configured to never install drivers", even though I checked the windows update to"Automatic update".

  I have a laptop Hp G60 - 533CL. I would greatly appreciate help or the market to follow to solve these problems.

  Hello

  Thanks for posting your query on the Microsoft Communities.

  I wish to inform you that HP has not released Windows 8 compatible drivers for model G60 - 533 CL.

  The reason why you are facing this problem may result from a lack of drivers for your hardware.

  I suggest you try to install all the drivers for your hardware in compatibility mode and check. You will first need to download all the device drivers on the HP site for model G60 - 533 CL and then install them in compatibility mode.

  Visit the HP website for model G60 - 533 CL to download device drivers: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4041422#N1993

  See the following link on how to install the drivers in compatibility mode:

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please answer us on the State of the question to help you further.