HP Pavilion Notebook - 15-p127: care service pack

Similar Questions

• I get an erroe OX643 code when you try to update net framework 3.5 service Pack 1

  I bought dragon naturally speaking premium 11.5 version when you try to install the software, it is significant that I need to update net framework net framework 3.5 service pack 1. I always get the error message about the failure of the update. I get the error code is OX643. I tried to install the framework net 2.0 also and get an erroe OX80131107. The computer is a hp pavilion media center windows xp service pack 3. The computer meets all the requirments for the dragon software to use, but I can not install. This computer is used just to the House and not for businesses. I don't know why there even any net framework in it. I bought the computer new in 2005

  Hello

  You can try the steps in the link below to fix the problem.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100

• A1250n Office Pavilion XP service pack 3, how can I clear the CMOS?

  HP Pavilion 3800 + Office product number a1250n EG194AA-ABA with XP service Pack 3 operating system, how do I clear the CMOS so I can install my new graphics card?

  John Perez
  1. Turn off all the devices connected to the computer. Unplug the power cord from the computer to the power source (power or power adapter).
  2. Remove the cover from the computer.
  3. Find the battery on the Board.
  4. With a medium flat head screwdriver, gently release the battery from its connector. Note the direction of the "+" and "-" on the battery.
  5. Leave the battery for 10-15 minutes, the CMOS to lose the settings.
  6. Replace the battery in the connector, guide the "+" and "-" correctly.
  7. Replace the computer cover.
  8. Re-turning on the system.

• HP Pavilion Notebook PC g7 - The Audio Service is not running

  I don't have sound on my PC for a few weeks, but when I use a headset it is solid. Today, I saw a message saying that the Audio Service is not running. What is going on?

  HP Pavilion Notebook PC g7

  #ABA product number A6Z29UA

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  Once this done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• S52060f Pavilion Slim Line: how create a set of recovery disks is service pack 1 burn on the disc

  Hello

  No problems with one of my desktop windows 7 but have some questions and concerns.   Outside my thin line, I have 2 other computers hp windows 7.  They are p6510T CTO Desk Top clubhouse and Pavilion HPE H8m Desk Top.   I created my own set of recovery for each computer cd.   When I created the recovery discs, I don't remember if my computer came with service pack 1 preinstalled by buying them directly at Hp.     My first question is this.   Do plant purchased hp computers come with service pack 1 already preinstalled.

  Next question.   If they do and the recovery discs that I burned for each service pack 1 image, too, be burned on the disks.   Finally.   Is there a limit to the way in which many times can I use my recovery by computer disks.

  You place your order of recovery disks is not possible that they are discontinued.   I also undertand after reloading windows I can load the service pack 1 back when running a windows update.   But it is easier to have service pack 1 already imaged on any set of recovery disks.   If some can please please point this out.    Thank you.

  If you create recovery discs when you got the computers, you can use them as many times as you want as long as they continue to work.  SP1 would not be included.  I don't think that they were not in what you received initially.  They come through Windows Update, see the center of update and the Service Pack

  http://Windows.Microsoft.com/en-us/Windows/service-packs-Download#sptabs=Win7

  The recovery disc for the p6510t are available at the surgeons of the computer if necessary:

  http://www.computersurgeons.com/p-22691-Windows-7-64-bit-10nasucw603-recovery-kit-589980-zh9-for-HP-Pavilion-Desktop-PC-model-number-p6510t.aspx

  The model s52060f turns out to be incorrect, please confirm.  The number of HPE H8m is incomplete, shall be read as

  HPE H8m K8300 for example.

  Maybe you should look at the backup to hard disk image using something like Macrium reflect free.  Check it out:

  http://www.Macrium.com/help.aspx

• Install service pack 3 Windows xp pro takes care of the missing DLLs needed for kernels. the mine antivirus program deleted some critical files

  from the start, windows fails to launch and a message of error due to the missing dll files is displayed

  If Windows does not start, you can not install Service Pack 3. And no, it is unlikely that your computer could get repaired by doing so, even if you were able to try. Try a repair rather installation:

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to MS - MVP - Elephant Boy computers - Don ' t Panic!

• HP pavilion p6570be / network driver for windows Xp home service pack 2

  My PC crashed. I did a format C: /. I had an installation disk windows Xp home edition, including service pack 2 to a friend. I installed it. Originally, windows 7 Home Edition premium was preinstalled. I'm not able to establish a wireless connection to internet. According to a friend, the computer does not have the driver for the network card. Given that windows 7 has been installed originally, I can't download the driver from the Hp support site. Who can help me?

  Hello:

  Here is the link for the XP wireless driver, you need for this model.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_111782_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP Pavilion Notebook: Error - C:\swsetup\sp71729\x64\HP SimplePass.msi

  I posted this problem from someone else who had the same problem 6 days ago and there still must be a response from HP.  The OP has posted his problem a few days previously.  Someone took my message about the same problem as the solution to the problem when it was not. Someone else offered a solution to the problem to uninstall specific updates.  This solution does not work.

  When you try to install the update for Simplepass, I get the following error

  Dialog box AppHelp cancelled preventing the application start error - C:\swsetup\sp71729\x64\HP SimplePass.msi

  The other forum thread is http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Installation-Failure/td-p/51984...

  I hope that this post receives an answer from HP!

  Number of product HP Pavilion Notebook PC [personal information deleted] all known Windows 10 updates have been installed.

  Ladies and gentlemen, a solution has been found - kinda sorta maybe.

  I went to chat with Joyce.  She was asked to take the remote access to my computer.  I hesitated because I heard of many horror stories of "technicians" to take control of a computer remotely, but I agree.

  It redownloaded the file and installed.  However, when the error message came, she did not click on the ok button.  Instead, the box has closed.  She waited about 30 seconds and viloa, the file has been successfully installed.

  Now I don't know if the box instead of clicking on the ok button of closing had something to do with fixing the problem, in fact I seriously doubt.  I suspect that an update or another, either Microsoft or HP had more to do with the real difficulty instead of how the error message has been closed.  As they say, timing is everything.

  However, after you restart the computer, I noticed that in my Start menu, all text was almost invisable when I would click the all Apps.  As time passes, it becomes a light gray, then darker and finally white.  It comes and goes, not always white, but not always completely invisable.  Yet once again, I suspect this has more to do with updates that whatever she did.

  BUT here's the part maybe kinda sorta.  When I brought this text matter to her attention, she was asked to take the remote again I delivered.  Without asking permission, immediately, she went in my Startup tab in the Manager of tasks and begun disabling and activation of the things that I know for an absolute FACT had nothing to do with why the start menu text changed color.  Then went to msconfig through the run menu and changed a few things in the service menu.  Then it restarted the computer, WITHOUT ANY CARE FOR me!  Now, when the computer has been rebooted first of all, I returned to firefox back to chat with her.  HP cat re-opened immediately in its own window, leaving the opening screen of firefox with the button restore session in a separate window.  When it restarted the computer, I never had the chance to restore my session and I actually lost all tabs through three windows of firefox.  I literally lost 5-6 hours work College that I had done previous.  Lost as in never went.  I tried to rename the previous.js file, but it was too late.  All of the tabs, all work has disappeared.

  Morale of the store, if you let someone else take control of your computer, make sure that all THE necessary work is recorded first.  I lost hours of work I can never go back and will have to start over again.  Something like that should NEVER HAPPEN.

  Hope that the solution works for those of you are having problems, and I hope that most problems are not created.  I know this well, it will be the last time that someone remote access my computer.  They can text me what to do in the future!

• Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

  Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

  Thank you!

  Hello

  Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Pavilion notebook 15-ab054c: CA of Hp Pavilion notebook 15-ab054ca adapter

  Dear Sir.

  I need a replacement for the power adapter for my computer laptop 15-ab054ca.  There is one at amazon.ca by Battpit adapter 19.5V 90W A 4.62.  Is it compatible with my laptop?

  I try to get one from Hp, but I don't know how.  HP website is too complicated for the search for what I need.

  Please advice,

  Thank you

  Tommie Mak

  Hi @tommiemak,

  Welcome to the HP Forum! Is a great place to find answers and advice! You have the best experience on the HP forum, I would like to draw your attention to the Guide of the HP Forums. First time here? Learn how to publish and more.

  I see that you need a replacement adapter and wonder if one thing you find on Amazon is compatible. Here is a link to the maintenance for laptop HP Pavilion Notebook (Intel) Star WarsMC special edition and Service of Guide. Please see Chapter 3, page 31 HP Smart power adapters for specifications and the replacement part number. You said you found the HP site too complicated to use. Here is a link to the correct page to find an adapter. Find the right battery or adapter for your laptop You can also call and order the adapter if it would be easier for you and would ensure that you get the right pair. 1-800-473-4732 (1 800 hp-direct). Please let me know if you need assistance.

  If this helped you to solve the problem, click on "accept as Solution" told the post. "To show that you 'like', or are grateful for my post, please click on the" ""Twww.Mountainview.rsb.qc.ca Up ' below. If there is anything else I can do to help, please don't forget to let me know!

• Yamaha XG - AC Audio device does not not after installation of Service Pack 2 for XP

  Hello
  I'm new to this forum and my question is maybe stupid, but I'm not able to solve this problem.
  My Satellite 5200 801 makes no noise after that I installed the XP SP2. I tried to find a new driver for the Yamaha AC - XG Audio device (one that does not is 6.13.10.2152 (2002-07-19 day), but I wasn't able to find anything.)
  Please, could you help me?
  Thank you
  Bruno

  Hello

  I found another announcement in this forum on this subject!
  Your Satellite 5200 802 has a sound chip called Yamaha YMF753 and it is built in different notebooks! This chip problems with Service Pack 2 because MS consider that the pilot of his Yamaha AC - XG is unstable. When Service Pack 2 is installed, Windows disables the audio driver.

  Here are some links that might help you!

  Yamaha generic driver:

  http://drivers.Soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html

  Useful links:
  http://www.Yamaha.co.jp/English/lsiexp.html

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;328435

  Happy new year!

  TOK

• 2012f5 used to install service pack 2

  I have just installed update f5 for LV 2012. I built a program on XP Setup program. Setup fails and requests for service pack 3. It worked and the generation of installation program indicates service Pack2 and above. That's happened?

  I dropped the CAR 429902 document this behavior.

  For now, assume that the XP computers require SP3.

  Please let us know.

• HP Pavilion Notebook PC G6 - continually turns on and off after that new ram is inserted repeatedly

  I just installed another 4 GB of ram, making it 8 GB. It works fine the first time, he started with the new ram, but when it goes off with the new ram installed for at least 30 minutes, simply refuses the RAM and just turns on and turns off continuously. I have to get out the new ram and turn on the computer to make it work again. Once he had a start of full without the new ram I can insert the new ram once again, but this problem is.

  Product number: A3D96PA #ABG

  Processor name: Intel Core i5 - 2430 M 2.40 GHz

  BIOS F.66 - 24/01/2013

  My PC is running windows 8.1 Pro

  The details of the new 4 GB of ram are: Crucial 4 GB DDR - 1600 SODIMM

  Hi Adam_M,

  Welcome to HP forum!

  Please ask, I will do my best to help you.

  I understand that you have installed additional up to 8 GB of ram and you have a problem starting.  Here is a link to HP Pavilion G6 Notebook PC Maintenance and Service of Guide SUMMARY.  If you notice in Page 3, under memory your system only supports up to 6 GB of ram. Please let me know if you want more help.

• The Print Spooler Service is not running. Operating system is Windows XP Service Pack 3.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Robear:

  I'll be back of the travel.  I'm after the suggestion of CARI.  Seems to be the right track.

  My print spooler system component is missing from the remote procedure call.  If I restore it, I think that the print spooler is reactive.  Suggestions of curry hit Start, Program Files, accessories and they type net start spooler.  However, after the departure, I don't see any Program Files, so am unable to complete the suggested path.

• Installation of Windows Service Pack 2 - spinstall.exe "Win 32 invalid app".

  When trying to download Windows Service Pack 2, I get "spinstall.exe is not a valid Win32 application" which makes impossible installation. It was on the second and third effort.

  The first time I tried to download and install the Windows SP2, I got "Extraction failed. amd64\update\update.exe is not a valid Win32 application.

  How can I download Windows SP2 successfully. The computer is running Windows SP1?

  You see the effects of a HIJACKWARE INFECTION!
  
  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft