HP pavilion notebook admin or market g6 password recovery

I try to put on my laptop and a black screen
opens with a blue box asking for admin
password or power on password. The
Passwords that I entered will not work. In any case
to ignore it? my laptop model is hp
pavalion g6 1100tx and the stop code is
60823981 please help me tomorrow is my
Conference presentation, you can also send me
[personal information]

Hello

Please try

75781307

Kind regards.

Tags: Notebooks

Similar Questions

  • Compaq CQ58: Admin or market of password recovery or reset

    Turn on or admin password with the code 73492862 to disable.
    I remember ever put this in place, but the fear of what my psycho ex might have done this to lock me out of my own laptop
    Help, please! I searched for hours

    @Firedancer77

    Enter 62590264

    REO

  • Pavilion 15: admin or power on password

    Admin or power on password, code 67607610

    help thank you

    @79howe

    Enter 78765236

    Kind regards

    DP - K

  • HP Pavilion: Bios Admin or power on password

    Hello

    I have a Hp Pavilion protectsmart, when I boot his request for an Admin or a power on password

    Serial number is [removed personal information]

    Press enter several times and the system hangs with code 57929804

    Please could someone help

    Thank you, Rob

    Dear customer,

    Welcome and thanks for posting your query on the Forum from the HP Support

    Looks like you are looking for a password here, we will surely help you with this problem

    Please try this password = 48681220

    Steps to follow:

    1. Use the posted above unlock code to access the BIOS
    2. Disable all passwords that are enabled
    3. If current password request - type the unlock code
    4. New password, simply press the ENTER key
    5. Repeat the same thing to check the password column.
    6. Then exit the BIOS saving & exit option to save the changes.

    Troubleshooting:

    Incase if the password does not work please try a Hard Reset as follows.

    1. Shut down the laptop
    2. Disconnect the power adapter and remove the battery
    3. Hold down the Power button for 30 seconds
    4. Plug the power supply/AC adapter (leave the battery for now) & start Notepad
    5. If now see you a password, please enter the same password I've shared before and press on enter

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star KUDOS left to say thank you*.

    Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • Pavilion g6: Admin or power on password disable System 75167062

    I am amazed! How you figure the correct code after that they give you the key to disable number?

    @NaNaNaNa333

    Enter: 60845064

    Kind regards

    DP - K

  • Pavilion Notebook p106: need a Code please recovery

    I need a recovery my number lock code is 50869486

    It is a power on password I forgot

    Hello

    Enter: 45741408

    Kind regards

    DP - K

  • HP Pavilion Notebook - 15-p233: need help to reset the password for notebook 15 "pavilion

    I need to reset the password for pavilion notebook 15 "15 p 233

    could you please help

    The error code generated after that 3 test is 687 47 264

    Thanks for your help!

    @simpleuser001

    Enter: 77625860

    Kind regards

    DP - K

  • Pavilion Notebook: Remove the need for a password

    I have a HP Pavilion laptop.  It requires a password each time I open that I do not need.  I could disable this process on other laptops, but can't find how to do this.  Can anyone help?  Thank you!

    Look at the example of command line, as I gave earlier in the image. It should be typed exactly as I show it with quotes and spaces.

    If your username is me, you must use quotation marks around your name and put a space between 'me' and *.

    Correct way

    NET user "me."

    Incorrectly

    NET user me *.

    If this isn't the case, you get items on your mistake above.

  • Pavilion dv7 6163 cl: unlock (reset) password on BIOS/CMOS for HP DV7 - 6163cl

    The bios of my notebook (Pavilion dv7 6163 cl) blocked by password, and I never put a password. Could you help me solve?

    Enter the wrong password 3 times or simply leave them blank and press success enter 3 times. You should get a stop code. This zip code here.

    https://BIOS-PW.org/

  • Pavilion p7-1074be: BIOS power on password not recognized

    Hello

    We have a p7-1074be pavilion desktop computer.

    We had set the market empty password (BIOS).

    Turn on the computer, however it says the password is incorrect.
    After three attempts, it shows a symbol representing a star *, but not give not any code.

    Restarting the computer re - allows three attempts.

    We tried the following:

    • Previous passwords, with or without shift caps lock, Numlock...
    • Reset the BIOS using the CMOS jumper.
    • Reset the BIOS by removing, waiting and replacing the CMOS battery.

    but none of that works, the computer always requires a password to market and still refuses that we set.

    Is there another way around this problem?

    Thank you for your help.

    Hello:

    Please read the info on the link below under the compensation password settings... Last listed item.

    There is a password jumper and a cmos jumper.  You must move the password jumper.

    http://support.HP.com/us-en/product/HP-Pavilion-P7-1000-desktop-PC-series/5080737/model/5223243/document/c02668523/

  • HP Pavilion Notebook - 17-f250: new SSD not recognized, Pavilion 17 AMD drivers

    Hello

    I bought the laptop (HP Pavilion Notebook 17-f250) on September 2015 and this September 2016, I decided to upgrade with a 2nd SSD.

    I bought a caddy, placed my SAMSUNG EVO 850 PRO inside, removed the optical drive and then place the CART inside the laptop. It fit perfectly, no problem there.

    But Windows does not recognize it at all in MANAGEMENT OF DISKS.

    It is not here in order to format it, etc...

    My IDE/SATA appears as "AMD SATA CONTROLLER".

    I can not find anywhere no possibility of enablev AHCI etc... My BIOS is not an option to check if the AHCI drivers are enabled or not.

    With the AUTOMATIC DETECTION is my driver: AMD APU A4-6210 with graphics AMD RADEON R3.

    My operating system is WINDOWS 10.

    FYI, I bought another same SSD for my office and worked smoothly. I only have a problem with my laptop, and I can't figure out how to recognize the Windows SSD!

    BR,

    Dionisis

    What caddy you bought? There are a lot of these on the market and some are not made with the highest quality control. You may have it tested with another hard drive?

    Second, the interface for the optical drive is SATA which is ahci. The drivers are not the issue.

    Finally, put an SSD in an optical drive is a little excessive spending from one optical drive interface is slower, so the speed of SSDS is wasted. It would be much better to put a regular hard drive large, slow in the optical Bay for storage. Having an SSD in there won't be fast in all directions. Also, a disc in an optical Bay will not be initiated.

  • Laptop HP Pavilion 14: try to reset the password Windows 10

    I recently bought a new laptop HP Pavilion Notebook 14 and in the initial configuration, created an account and a password but did not create a password reset disk, an administrator account, or an alternative setting for logon. I am also not registered with Microsoft so you cannot change the password in this way.

    I've seen instructions on downloading ISO software and trying to boot via USB key, but none of the command prompt so far work. I tried F9, F10, F2, F6, etc all on their own or by pressing ESC first. Is there another way to recover the password? Otherwise, given that nothing has been put in place on the hard drive and yet, it would be easier to default to the factory settings? And if so, what is the best way to proceed?

    Hello

    You can perform a factory reset as indicated in the link below - see the subtopic "valuation when 10 Windows does not start successfully.

    http://support.HP.com/us-en/document/c04758961

    Kind regards

    DP - K

  • Pavilion Notebook 15-ab243cl: transfer from old computer to new computer programs

    We just bought a new HP Pavilion Notebook, with 10 windows, to replace its old HP Pavilion dv4-2153, which has been upgraded to Windows 10.  Now we have a problem - how to move programs and files to the new.

    I found two products on the market that claim to be able to do this, but critics of both of them include some less then incounaging stories.  I hope that HP has developed some good software to do this, especially between their own products, or at least can recommend a reliable software.  They must be proud when a customer likes their products well enough to replace genre by genre.

    Any help here?

    Thank you

    Dennis

    dfsplett

    Hello;

    Let me welcome you on the HP forums!

    I read your message want to migrate applications from one PC to another and wanted to help.

    Sorry to disappoint you, but HP doesn't no matter what app migration software (that I know).

    However, LapLink does – in its range of PC Mover of products.  The one who moves in the apps is the Pro version.

    I know it works because I used it myself.

    The new version, Win10, has an additional feature that you can migrate applications from an Image file.

    Which means, you can make a backup of the complete picture of your old PC (and to do this, I recommend Macrium Reflect - further) a key USB or external hard drive, which will allow the new PC, install PC Mover there - and restore apps directly from the backup image.

    Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.

    What I recommend is the following:
    (1) download and install Macrium reflect (MR)
    (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key

    You have NOW a backup of the image of the old PC - and all of the information required by PC Mover to migrate applications to the new PC.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • passwor admin or power on password. Help

    Im having a problem on a Hp Pavilion series g, the screen is requesting a password admin or power on password, after three attempts he said disabled system and gives the code 87942616

    Tpayne try.

    38620238

    Use this code to go into the BIOS.

    Disable all passwords that are enabled.

    If demand for CURRENT password using this code.

    Request NEW password just press ENTER.

    If asked to hit just to CHECK password to enter.

    Save and exit.

    REO

    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  • Somehow my laptop, Windows XP admin account has a password on it, and I don't know her, or my username. How can I get around it? Solve this problem?

    My laptop Compaq Presario 2100, Win Xp, I disabled the login at startup screen. Then, had access to the admin. Laptop on the market today and it asks for a password... Never, I put a password and don't remember the username I created for other user accounts. I tried F8 option in all modes. Always ask "username and password".  Did the MS-DOS startup disk, the microsoftfixit, the password recovery programs... Nothing works. I don't know how do past the opening screen of Windows session to any disk works. Please help me in recovering my user accounts and laptop.

    Hi Jdttn32,

    You can follow this link & check if it helps.

    How to connect to your Windows XP-based computer if you forget your password or if your password expires

    Note: Check out this article which describes the missing Microsoft strategy, lost, forgotten, or incorrect password.

    Microsoft's strategy concerning lost or forgotten passwords

    Hope the helps of information.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for