HP Pavilion Notebook n031sa 15: 15-n031sa of HP Pavilion Notebook does not

Similar Questions

• I have my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it might

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at * address email is removed from the privacy *.

  Thank you very much. I hope hear from you soon. Thank you once again :)

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at e-mail removed for privacy

  Thank you very much. I hope hear from you soon. Thank you once again :)

  You have a laptop. So try the right button on your touchpad. It work?
  If so, the only remaining possibilities are:
  1. bad mouse. Get a new one.
  2. defective UBS port. Plug the mouse into a different port. See if the right click of the mouse works this time.

  P.S. We do give advice to users via e-mail. All responses must be published and remained in this forum so that others with the same problem will use the answer.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Pavilion dv9005us does not illuminate

  My Pavilion dv9005us does not light with or without the battery. I held the power to discharge remaining power, then plugged in the ac adapter shows blue light to the decision-making of the laptop, but none of the front lights light up. The motherboard is burned out? Any advice. I just got windows 7 to put on the laptop and unable to start. Bad luck!

  GDH777 wrote:

  Hello and thank you,

  but I had already done all the things that you suggested and your advice was right on point, but the laptop is a 2005 model and in its release cost a fortune, I guess we got our money wrth although I could buy 4 destops for the price of the HP Pavillion dv9005, just want to I could get it to start , with his age, he is not a value of the repair costs.

  But I so appreciated your answer... Viewied much my post but you were the only one to respond, sad for the HP forums. I went else where to get advice and got a lot of instant answers... If the laptop is still under warranty it would not have been a problem. I don't know that this model had a recal on this HP never does the model owners aware of the recall... What a pity so disappointed in HP. I bought a Lenovo y580 a year ago and I doubt that I'll never have problems with support.

  I hate to complain, but still Ty

  Remember, this is a users forum and questions are answered when you can be sure of the answer. I can say, on the one hand, if your system is an AMD-based system in the failures of graphic chipset Nvidia/AMD feared so your Board is most likely won't want to work more. Dv6000 and DV9000 HP have been candidate of choice for these chipset failures unless they have their video chipset fixed or replaced.

• 2 USB ports on the left side of my HP pavilion g6 does not

  2 USB ports on the left side of my HP pavilion g6 does not after I formatted my system, it detects all the devices plugged in these two ports, before operating system was family premium from Windows 7, but now he have professional window 7, what can I do?

  Windows 7 64-bit, install:

  Intel USB 3.0 Host Controller Driver

• my computer hp laptop Pavilion dv6800 does not illuminate

  My hp Pavilion dv6800 does not illuminate

  Try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• HP Pavilion dv6 Notebook PC: Wireless Device on HP Pavilion Dv6 does not!

  Hello! I'll start with my mobile information system (and please excuse my spelling and language because I am very frustrated at the moment and typing this on a cell phone)
  
  It's a HP Pavilion dv6 Notebook PC with product number - B3K21PA #ABG. Serial number is 2CE2201C96. I have a Broadcom 4313GN 1 x 1 adapter Wi - Fi 802.11b/g/n according to my device manager. I recently chanhed my ISP and the wireless router, they provided is the Linksys E1200 model.
  
  Now, on the problem - after the use of an extended internet (Skype call or internet games) my laptop just stops giving me access to the internet. And I say it like that because the internet connection icon shows that I have access to the network and internet connection, but none of my software or browsers are able to connect to the internet. This is the first time, she does. I tried updating the driver (both by checking the driver updates and downloading the drivers manually). I also tried system restore and everything I could think off trying to do a factory reset on the whole thing. And I should mention also - although this problem has happened several times now since I changed ISP (and Yes, I called them on this subject too), this currently seems to be permanent, because it has been hours and it still does not.
  
  Any advice on what may be the problem or that the methods to try to resolve this would be greatly appreciated. I agree to be only moderately enough when it comes to operating a computer that I am not tech savvy kind, but have been using computers for a while now. For now, my current solution is a fall from my window on the 16th floor and see if that fixes anything. I'm not in my own country and the laptop is old a few years for technical support is hard to find.
  
  I might be sounding a little passive aggressuve and I apologize for that (I have, however, do not deny these circumstances).
  
  Thank you for reading through my wall of text of nonsense and condescend to help a poor fellow in his time of need.
  
  Yours sincerely.

  Hello:

  See if this help... driver installation is much more recent than on taking in charge of your computer laptop and driver page.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_126926_1#tab1

• HP Pavilion dv6910us does not start

  HP Pavilion dv6910us will not start. Power, bar of quickplay, touchpad and dvd lights on then just immediately stop no beep codes or fan sounds are heard. Also tried the hard reset and no luck.

  Any help much appreciated.

  Hi @jaimet1, @Sinister , @stevestock1 , @Kscarlisle , @Abdullah_Ali ,.

  Thank you all for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked at your question about your HP Pavilion Notebook and starting problems.  If you have replaced the motherboard and it is always the case - it isn't the graphics as graphics are attached to the motherboard. Here is a link to computer will not start.  I start at the top and work my way down.

  Mine has been corrected with the relocation of the HARD drive. Others must have fixed with just reinstalling the memory. Here is a video that shows you how do to remove and reinstall the HARD drive and memory.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can Reset the BIOS with this document by selecting the reload the default BIOS settings. Helping others it restores the default settings.

  I hope something here helps anyone of you difficulty the laptop.

  Thank you.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Pavilion 23tm: 23tm Pavilion touchscreen does not work after upgrade Windows 10

  After the upgrade to Windows 10, my monitor touchscreen Pavilion 23tm lost touch.  I looked for a driver on the HP site and it required me to download the HP Support Assistant application.  In other words, the site would not just download an update to the driver.  After you download HP Support Assistant and running this application, he did not find the Pavilion 23tm monitor, then I hit a dead-end.  I think I just need to be able to download the latest driver, but the HP site will not allow it.

  Hi there @jazzquilt,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with your touchscreen after that upgrade to Windows 10 and that you have installed the HP Support Assistant for help, but the problem remains. I'm happy to help you.

  The research of the model of the screen, I found a driver Windows 10, below the link. Give it a try, if you have not already.

  HP 23tm LCD Monitor - driver Windows 10

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion TouchPad does not?

  Hello, I have the HP Pavilion dm4 2015-dx and this morning when I started my computer the touchpad does not work. I use a mouse and it works fine however. I tried the download Synaptics and followed the instructions but it didn't work. Help!

  Mastiucha,

  Take a look at this document - file mentions the methods used to enable / disable the TouchPad.

  You could jump repeat the reset method.

  Enable / disable the TouchPad

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts.

• Pavilion M6-1045dx: HP Pavilion M6 does not start

  My computer does not start.  Screen is dark, even if I hear a fan.  When I tried to start, it turns on and turns off after a few seconds.  I removed the battery and the power turns on but does not start.  I tried a hard reset, nothing helps.  I also eliminated a fo the two strips of RAM and tried to start with each of the two, but this doesn't work anymore.

  I had installed a Samsung SSD a year ago and everything worked fine.  Last night, I reinstalled the rotation of the original hard disk supplied with the computer and the computer booted.  I reinstalled the SSD and everything worked like new.  In other words, until this morning.  same symptoms.

  How to diagnose and fix?

  I forgot to mention that after I installed the original hard disk, the bios updated and the computer worked fine until this morning.

  Caps lock key seems to blink twice, but the model is difficult to discern.

  Hello @Dakest,

  Thanks for the quick response!

  Please see the following documents and let me know how it goes:

  HP computers - HP BIOS selected Application is damaged or missing

  HP Notebook PC - restore BIOS

  If you're still having problems, then you can consider replacing the CMOS battery, to see if this solves the problem for you.

  I hope this helps.

  Have a great weekend!

• Power cord IPS L: Hp monitor 23 inch HP Pavilion 23xw does not take to the office?

  Good so I recently bought a new desktop computer HP and monitor, but does not have the cord that connects the monitor to the computer (I think that's what we call a vga?) or I guess that is not compatible.

  The office, I ordered is a P5Q80AV of HP ENVY 750 #ABA_1 desktop PC
  This is what looks like the back of it, and I guess the part surrounded by a circle is where I would plug the power cord of the monitor to the computer?

  

  The monitor is a HP Pavilion 23xw 23 inch IPS LED backlit monitor J7Y75AA #ABA
  It's the rope

  

  Am I missing something here, or do I have to return this and buy another monitor? Where can I get something else that will connect the monitor to the computer?

  I apologize if this sounds stupid, I'm just not tech savy.

  Your graphics card HDMI, it seems that your monitor is also.

  So, you can use an HDMI cable to connect your PC to your monitor.

  Or you will need a VGA adapter DVI [masculine] [man].

  The top connector is DVI - D [Dual Link] and only supports digital displays.

  The lower connector is DVI - I [double link] and support a display either analog or digital.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Pavilion G6 does not connect to the cellular device

  I have a Pavilion G6 with Windows 7 OS, which is used as a mobile data terminal. I am trying to use my iPhone Verizon 5 c to connect to a hotspot. All my other HP laptops connect to this phone without problem, but the G6 does not connect to the internet via the phone with cable, wifi or bluetooth. The G6 recognizes the phone and shows it in "unspecified devices." I tried everything to get it to connect without success.

  Hey RC800,.

  Thanks for the info.

  I forgot to ask before, can you tell me the exact model specifications what do you use? For more information on the search for your model and product numbers, click here: How can I find my model number or product number?

  If the laptop connects to other devices, we can say that the material is very good. If he does not see the iPhone theres only a few things you can try. The adapter in your laptop is probably 802.11 g capable which is the minimum requirement for the hotspot iPhone, so we can exclude.

  Please, try the following:

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test another iPhone connection:
  Explicit. This will tell us if it's only an incompatibility with a phone or any iPhone hotspot. Try a hotspot Android will help narrow things down as well.

  Let me know if this helps.

• Pavilion dv9743cl does not turn on

  I have a pavilion that has been through the issuance of nVidia and replaced the motherboard.  After a few weeks, the laptop will not light.  All the entertanment light up, the fan works and the liight hard drive lights up for a few seconds.  It seems that the POST does not run as long as the lock to Caps Lock/Num Lock/scroll normal that flashes to do not.  (It is a different behavior than when the GPU has failed).  I did the hard reset, removed, cleaned and reinstalled DRAM, checked the readers of sting in a borrowed netbook and still cannot get it.  Anyone have any other ideas?  Thank you.

  Based on the information provided, it sounds like a system board failure since the POST tests do not complete and everything that can be called in place has been reinstalled including a hard reset.

  Just to confirm, the hard reset has been achieved by cutting everything (including the charger and battery) and now the power button for a full minute?

  If the motherboard has been replaced in the last 90 days, you can try to contact HP to look at have served again. I am not sure for locations outside the United States, but HP generally has a limited warranty on the components repaired or replaced. It may be interesting to look into.

• Pavilion 15 n096sa: Hp Pavilion Wireless does not work after Windows 10 critical update

  HP laptop Pavilion 15 PC - product number: F4T58EA #ABU - 10 family 64-bit Windows

  Hi all

  I have recently upgraded to windows 10 and had not had any problems until one evening internet dropped out. After a while I realized the wifi adapter did not work. I tried to update the driver, nothing helps. The unit displays under working properly in Device Manager but does not appear in the network connection settings.

  I tried a system restore point that solved the problem but then Windows 10 updates (updated critical around 23 September 15) and wifi no longer works again. I noticed there was recently a couple of new updates of the driver (sp72517), but these have not solved the problem.

  I can still connect to the Internet using a LAN cable, but need help need help I can't easily use a LAN due to the location of routers. I've updated the Hp Wizard and I tried troubleshooting etc but still no joy.

  The elbow of any help would be appreciated gratefully.

  Thanks TT

  Hi all

  I managed to find a solution to this problem online, don't know how or why it worked, but it solved my problem and I hope that it might help others.

  I uninstalled and deleted the files from the wireless driver, then uninstalled Kaperskey and restarted my laptop. Then I went into Device Manager and manually updated the network drivers (think I might have restarted again here) and sucsess hey presto, all that remained to do was to reinstall kaperskey.

  Hope this helps someone else with a problem with wifi Realtek Pavilion.