HP Pavilion Notebook: No more Wifi after update realtek wireless LAN drivers

Similar Questions

• Satellite L50 - C - impossible to update Realtek Wireless LAN Driver

  Hello

  Whenever I try to install the Driver Realtek Wireless LAN 2023.17.731.2015 using Toshiba Service Station, the program starts and the permissions window arrives, I click Yes but nothing happens. No other window does not appear, and the update is still in service station as if nothing happened.
  Is there any fixes for this?

  I am using a Satellite L50 - C

  Thanks for any info

  It could be interference from program, first go into your software settings in your BIOS, go to security and disable secure boot. This can sometimes prevent update programs. And then perform a clean boot, follow these instructions to make a boot minimum https://support.microsoft.com/en-us/kb/929135
  Then, disable your antivirus and firewall completely and run the update again.

• HP laptop - 15-r150nm: problem with wifi after update realtek adapter

  Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

  (2) "a network cable is not plugged in correctly or may be broken.

  What should I do, I have only this laptop and internet wifi, write this work? Thank you!

  Hi @frane53nja,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

  Go to the nursery of the device

  Click the network tab to expand the list.

  Right-click on the wireless network adapter and select roll back driver.

  Repeat this process for all types of adapters listed.

  While on this screen please check this definition also.

  Right click on the wireless adapter and choose Properties.

  Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• Satellite U940 - update Realtek Wireless LAN Driver

  I just upgraded my Satellite U940 PSU6VA - 00S 002 Windows 8 to 8.1 of Windows and am currently following the instructions of the upgrade from here. I noticed that European and Australian Toshiba sites include a 'Realtek Wireless LAN Driver' in their list of downloads driver for Windows 8.1 for the Satellite U940:
  - European page
  -[http://support.toshiba-tie.co.jp/windows81/drivers/PSU6V_Up_au.htm]

  However, I have never noticed any a Realtek wireless LAN driver on my computer, before even that I have upgraded to Windows 8.1. I've only seen in Device Manager network cards:
  -Intel Centrino Wireless-N 2200
  -Realtek PCIe FE Family Controller (which I believe is a wired LAN driver, not a LAN wireless driver).

  So my question is: do I have to download the Realtek wireless network driver or is it not suitable for my system?

  > So my question is: do I have to download the Realtek wireless network driver or is it not suitable for my system?

  Your laptop was equipped with Intel wireless network adapter and NOT card Realtek WLan and therefore the Realtek WLan driver does not need to be installed.
  You should consider a fact: there are different laptops on the market models that are equipped with different material parts. Some support the Realtek WLan card and some models were equipped with modules WLan Intel and that's why you can find some drivers (like Realtek Bluetooth Driver Package Filter) in the driver from the list of downloads that are not essential for all models.

• HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

  Hello
  
  WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

  Update driver BIOS update effective system is rebooted and the wifi does not.
  
  Please help me.

  In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

  Select the update that is dated from when you had the question.

  Click it to uninstall.

  You have to restart the laptop afterwards.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• Pavilion p256ur: problems with Wifi after waking up (only)

  I have a problem with my new laptop Pavilion p256ur. After he wakes up (only) the wifi (Broadcom BCM 43142) adapter does not. turned on in device management, it can not find any network. WiFi button (in the system settings menu and status bar) don't respond - it seems that the wifi is turned off. I try to:

  1 power off and power on this card in Device Manager

  2. turn off power off (to save energy) option in the settings of the adapter

  3 (default) old uninstal and install the most recent drivers

  4. install the latest driver for chipset

  5 control wlansvc service-, she strives to after wake up

  but his do not solve the problem.

  If I try to reinstall the drivers wifi after last stride upward of his works, but until the next morning to the top.

  In an event list management device devices there is a message:

  Bcmwl64.inf_amd64_0f3430bbd776c163\bcmwl64.inf installation driver for device with ID PCI\VEN_14E4 & DEV_4365 & REV_01\0000E2FFFFCDD85D00 & SUBSYS_2230103C, supplemented by the following condition: 0x0.

  After the system restart wifi works correctly, so if I want to use the wlan I must not sleep notebok. but restart it every time (or reinstall the drivers) is not comfortably. can you help me please?

  Hi @Medvejo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your 15-p256ur HP Pavilion Notebook and Wifi problems after wake up. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Click on choose what the power button. Figure: 13 choose what the power buttons. -Uncheck allow the computer to turn off this device to save power under the management of the power supply of the wireless adapter.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Tecra R850-117 no WiFi after update Windows10

  I tried to update windows 10 TECRA R850-117.
  After update wifi is not found. Had to goback to win7

  Any suggestions what could be done for successful update to win10 with working wifi

  There is probably a WLan driver problem.
  I think you should check if the wireless card is properly recognized in device-> network cards Manager.

  In addition its recommended to uninstall the WLan driver in Device Manager and restart the laptop. Usually Win 10 is expected to begin the search for compatible driver... If this is not the case, you can manually search driver update (also in Device Manager)

  Of course, the laptop must be connected to the internet using LAN

• Problem in using wifi after update to 8.1 win

  I have a hp envj 15 j048tx containing the model of 3290 Ra link wifi... even afetr updated of the latest album i.e. 5.0.37

  I'm unable to use the wifi... I mean I can't connect to wifi properly access points... Sometimes, the connection does not appear... and maybe more problems... How can I solve the problem? >>> ??? /

  Hello Vira_Bathwar,

  Thanks for posting on the HP Forums!

  I understand that the computer wireless functions stopped working since the upgrade to Windows 8.1. I'll do what I can to help you!

  To help out, there are two downloads that I will provide. The first is a software driver Ralink 802.11n Wireless LAN. It is precisely the problems of upgrade Wireless Windows 8 to 8.1: ftp://ftp.hp.com/pub/softpaq/sp65001-65500/sp65047.exe

  The second is Mediatek 802.11n Wireless LAN Driver for this product for Windows 8.1. All Mediatek drivers now provide correct Ralink support, which has caused some confusion. You can locate the correct driver here, but only try this one if one goes down: Mediatek 802.11 Wireless LAN Adapter Driver

  I think this should help you. Whatever it is, please provide your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• Vista Home Premium; "no audio device is installed" after update Realtek.

  Hello

  I recently updated the driver from myRealtek, and after reboot as recommended, I got a red X on my sound icon and the message "no audio device is installed" under the sound engineer. Realtek and Unimodem drivers audio show that they work and I uninstalled both and reinstalled the latest versions and then uninstalled and reinstalled the original ones that came on the computer, but nothing has worked. I stopped, started and restarted Windows Audio and tried restoring the system (without success) and recovery of driver (would be successful) but I have still no sound.

  I run Vista Home Premium, 32-bit, Service Pack 1 on a HP Pavilion dv6648se.

  Ideas, suggestions or comments would be appreciated, I'm starting to think that I might have to perform a full recovery of the system. Thanks in advance!

  ~ Xyli

  Hello

  The main thing is the driver version in Device Manager - the same as that of its
  you installed - you run the driver - restart until it is - you must do it manually and not use the
  Updated driver (more than initially) and not to use the restoration in the Device Manager. Also check doubke
  you actually have the appropriate driver.

  Check/settings (BIOS/CMOS) as you start screen - often F2 shows you start for the keys. Do
  its edge is activated,

  If you can not do work check with HP Support and forums for known issues. Or take to a real
  computer store (not the leeks and the glances at a BestBuy or other BigBox stores).

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  You can also disable the sound board and use a USB sound card that is not expensive.
  Rob - bicycle - Mark Twain said it is good.

• HP Pavilion Notebook - 15-p164: could not find the list of drivers

  I get the message "cannot find the list of drivers for your product.  Since the installation of the driver for my GPU, I get the BSOD "thread stuck in device driver".  I make sure that I have all the correct drivers.  Thank you.

  @Aljoli

  Two systems in this category...

  HP Pavilion Notebook - 15-p164ca (ENERGY STAR)

  and

  HP Pavilion Notebook - 15-p164nr (ENERGY STAR)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Why my executables LabVIEW losing features GPIB after update to 488,2 drivers

  A year ago on a remote test unit, I had put in place for a production line, a worker had decided to launch National Service update of the Instruments on the test PC and update all available programs. After this update, none of the GPIB functions worked on test executable for the test of LabVIEW software. After the execution of Automation Explorer, I was able to confirm that all of the GPIB instruments were still present, operation and alias still correct. The only way I could solve this problem was by erasing all National Instruments software and put it back into place, again.

  Yesterday on a local test machine is the same thing. This time 488.2 full driver package has been installed from a USB stick to update the 488,2 drivers on the machine and subsequently, none of the GPIB functions worked, causing all LabVIEW test executables to lock up. Once again, Automation Explorer shows that the GPIB instruments are installed and functioning and all aliases are always accurate. I erased all the software of NOR and reinstalled but now I stil can't get LabVIEW programs to work properly.

  Someone at - it of another expereinced this problem?

  What is the solution?

  After thinking the problem to the remote installation, it appeared that after a year of operation, the problem occurred after update 488,2 pilots to the new version 14.0

  The cure is to install the drivers of v3.1.2 previous back on the system.

  I uninstalled all the software version 14 of OR out of my test PC set-up and installed the package v3.1.2 OR-488. 2 and all the executables started working again.

  The Readme for VISA DURATION v14.0 says is comaptible with LabVIEW versions 2011-2014, but apparently there is a problem at least 2013 that touched me.

• Satellite C660D - after update BIOS wireless card no longer works

  Hello
  Yesterday I Tempro message asking me to do an update to the BIOS: 'bios-20120601184846. I did but it was not reinstalled the wireless driver, and since my computer can't find any wi - fi network. I still have a working ethernet connection.

  I tried several ways to fix it and nobody has succeeded:
  -J' installed the driver "slate-driver-s1081-win7-wlan-1005.31.1222.2011".
  -J' installed from the toshiba Web site, the driver "realtek_wlan_win7_2000016L_20110523".
  -J' tried a system restore, but he made a mistake and did not work

  How can - I'm restoring my wi - fi connection?
  Thanks for your help.

  Technical information:
  Model: Satellite C660D - 104 Ref: PSC1YE-00Q001FR serial number: 3B097607K
  Wi - fi card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC #2
  Windows 7 64 bit

  PS: Sorry if I don't speak very well, I'm not English.

  Hello

  This means the card WLAN is not listed in Device Manager?
  Some unknown device is listed in Device Manager?

  To be honest, this issue is not known to me but if it please try to set the BIOS to default settings and check again.
  I put t know if this will help but you can back up all your data and install again recovery image to check if the same problem persists with the factory settings.

• Satellite C660-15 cannot install the update of wireless lan

  I receive a notice indicating that my wireless lan driver should be updated. I followed the instructions and know which unit my laptop (Realtek: RTL8188CE) and download the appropriate driver software. It appears as a zip file in my downloads folder. I unzip and then what?

  Read the instructions Dutch (although I prefer English on notice that download and update the driver) it is said to look for a readme file (they are all very old, since 2010, none in 2011). Really they don't say anything about what to do. In Dutch, he also says to click on SETUP. I find one that is marked as an application, so I double click that.

  It runs, and then on the screen it says something like: "the software may or may not have installed correctly". So I click on it to install it again. Same thing.

  I had no idea if it installed correctly or not, so I clicked on the features of network/system/control panel (?) / Realtek... and right-click to see which version of the device driver is there and it has not changed.

  So, what should I do to get this new driver works correctly?

  I tried several times and it doesn't work right. It becomes very frustrating and there seems to be no way to contact Toshiba support, other than through this forum (which is users rather than support from Toshiba, I think).

  Help, please.

  cjbbrussels

  Try to install the driver using the old-school method.

  Enter the card WLAN (Device Manager) properties > driver > Update driver and browse to the RTL_Driver folder. Choose the folder 7 x 64 or 7 x 78, according to the version of the OS you are using.

  I think that it will install the driver.

  By the way: If your WLAN is working properly you should not install this driver.

• My Iphone 5 c is not connect to any wifi after update ISO9, I only downloaded it 12/01/2015.

  After downloading the latest IOS 9.1 12/01/15, my phone can't conenct to my University, not even comments wifi wifi as it says 'unable to connect '.

  I tried all the option shown so far, restoring phone (unfortunately I can't restore before this date that my phone has since on my itunes and icloud), reset the network settings and reset the entire phone to factory settings.

  All wifi available are visible, whether they say cannot connect user name or incorrect password when I know that it correct.

  Any help would be greatly appreciated.

  Thank you

  Tim

  Hi Little_Timmy,

  The resources below provides troubleshooting steps for connectivity Wi - Fi with your iPhone.  Your administrator University computer SCIENCE may be able to help more because they have activated additional security settings.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network
  https://support.Apple.com/en-us/HT204051

  For more help, try restarting your device, router or cable/DSL modem. After each step, check to see if you solved the problem.
  • Restart your iOS device.
  • Unplug your router and plug it in again.
  • Unplug your cable or DSL modem and plug it in again.

  Still not connect?

  Reset your network settings. Tap Settings > General > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  If you use a network in a business, school, hotel, store or other place of Wi - Fi, find an employee for assistance.

  If you are connected to a Wi - Fi network, but you can't get online, try to use your Wi - Fi network on other devices. If you can't get online using your other devices, there could be an interruption of the service. Call your internet provider cable or the assistance company.

  Try to connect to a Wi - Fi network in a different location. If your device can connect, you will need to get help with your Wi - Fi network. If it cannot connect to Wi - Fi networks, contact Apple.

  Update your Wi - Fi router with the latest firmware and check that the router supports your Apple product. For more information, contact the manufacturer of your router.

  Take care