HP Pavilion Notebook PC - letter N g6-1372sa has stopped working

I have a HP Pavilion g6-1372sa Notebook PC, and last night at the N key suddenly stopped working, no matter what I do, its does not work.

I have attached an external keyboard usb to the laptop computer and its operation, the on-screen keyboard is working and on both the letter N is displayed when I press on it.

So my question is, do you think that if I replace the key, it will help or solve my problem? or do you think it is custom? or other advice I can do to make sure his work or so?

So please help me to solve this problem, I need my n

Thanks in advance

Hey FairyLove,

Thank you for the additional information. If you have taken care that the next step would be to replace the keyboard.

Here is a link toManual 19 for replacement. Here's a Youtube video on How to check keys.

Hope this helps you.

Thank you.

Tags: Notebooks

Similar Questions

  • HP Pavilion g6-2240sa - almost the entire keyboard has stopped working. Help please!

    Hi, I have a HP Pavilion g6-2240sa with Windows 8 operating system.

    This morning I turned on my laptop and the keyboard was not working, I had to use the on-screen keyboard to connect (this icon narrarator was fortunately in the lower corner). Later, I tried all the keys, just in case where it was not all keyboard - and discovered the tab left ctrl, NumLock, CapsLock Num 9, f10, f3, f6 and numlock less all responded but were only playing with the light and sound.

    I did not any changes to the system recently that could have caused this and the only thing I can think is my boyfriend stumble on a staircase door in my living room entry and obtaining of coke on the table, maybe a little spashed under the screen, but I do know that nothing got inside the computers speakers.

    I have tried to find solutions and trying to shut down the computer, remove the battery and hold the power button and enter the Security menu, keys do not respond when I try to go to the Security menu, so that didn't work.

    Can someone help me please, I'm still under warranty, but I hope it's something I can fix myself.

    Hello

    You can start on the corresponding link below.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • Pavilion dv8000: win7 usb ports dv8000 for has stopped working

    all 4 of the usb ports on my dv8000 has stopped working. Ive tried to update the drivers, no luck. He originally had XP as an operating system, but it has been upgraded to windows 7, I don't know if usb disks are corrupt or what. When I plug anything into the usb ports, it does nothing. Ive been trying to get this fixed for so long and his frustration, someone knows how to fix this?

    Hi again bigd4747,

    It is good to hear from you!

    I have conducted research on software and compatible driverscommits and have found that your laptop has no compatible drivers for Windows 7.

    Alternatively, you can try to update the drivers of USB port in Device Manager by following this document on How to install a driver in Device Manager. If it does not install the necessary drivers for the USB communication, you may need to downgrade to Windows Vista (32 bit).

    I hope this helps!

    Best regards

  • Cool fan has stopped working - laptop HP Pavilion dv7-6c95dx

    The colling fan has stopped working properly. After research, I learned that it is a COMMON problem for this laptop in particular. Of course my warranty just expired 2 months ago... so...

    I need info on this exact model fan, with that I need to replace it, as well as instructions on how to do it. It is a HP design flaw I think personally that you need security regardless, but I know that will never happen... so let me your useful insight in the matter. Thank you very much.

    HP Pavilion dv7-6c95dx laptop

    Here are the specifications of your HP Pavilion dv7-6c95dx Entertainment Notebook computer. Here is the HP Pavilion dv7 Notebook PC - Maintenance and Service of Guide for your computer. According to the specifications and guide, it seems that HP part #666392-001 is the replacement part you need.

    Disassembly instructions start on page 41 of the maintenance and Service of Guide.

    Please send BRAVO

  • HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

    Hello

    I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

    Please help me and guide what is the cause of this problem and how to solve this problem.

    Gassab

    HI @Kartic

    Welcome to the HP Forums!

    This is a fantastic place to find answers and suggestions!
    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

    How can I find my model number or product number?

    I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

    Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

    You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

    Here is a link to an overheating and Auto Shutdown problem troubleshooting.

    Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

    You can run the Wizard to help HPin order to facilitate this process.

    Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

    Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

    World wide phone holder

    Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

    You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

    How to apply thermal paste

    Good luck!

  • Pavilion g4: apllication of Catalyst Control Center: Host has stopped working...

    I get a pop-up window saying: "Catalyst control centre: host application has stopped working.". "

    It is written in the body of the box: "a problem caused blocking program woring correctly. Windiows will close the program and notify you if there is a solution. "

    I can't connect my games online as well. Please give a good solution

    Hello @Sailorswrath ,

    Thank you for your inquiry.

    What is your exact model of the Pavilion G4 you have?

    How can I find my model number or product number?

    There was a recent change before that happened?

    Have you tried running MS difficulty?

    Have you checked against viruses and malware?

    Here is a link to help test for a hardware failure.

    HP Notebook PC - detection of hardware failures (Windows 7, Vista)

    If it is a recent change, you can perform a restore to a well known date?

    HP Notebook PC - using Microsoft System Restore

    Good luck!

  • I installed quicken 2009 connected as owner on Vista Home Premium Notebook Sony. When I try to run Quicken I get a windows message immediately that "Quicken launcher has stopped working" Windows will attempt to resolve then problem__

    I installed quicken 2009 connected as owner on Vista Home Premium Notebook Sony. When I try to run Quicken I get a message of immediate windows Windows "Quicken launcher has stopped working" will try to resolve the problem then

    Hello Richard Popp,.

    I'm not an expert on Quicken so I do not know what help I will be.
    You could look at this post on the Quicken Forum and see if this information helps you.
    https://qlc.Intuit.com/post/show_post_full_view/cppSsgKbWr3PYHacfArQA8

    1 Quicken uninstall using the Windows Control Panel

    2. run qcleanui.exe and clean all versions.

    3. restart your PC

    4 Quicken resettlement to a new distinct and NOT in the Program Files folder in the folder where your Quicken data resides and install as administrator (if on Vista).

    5 update Quicken at the last updated R6.

    See if that helps. Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Toshiba notebook registration reminder has stopped working

    Hello

    everytime I open my laptop it displays "of Toshiba notebook registration reminder has stopped working".

    How can I fix it?

    Hello

    Should you the registration reminder? I put t think so, if you have already registered your laptop

    Way the easiest is to disable you the program from startup to navigate to start > run > msconfig and select start tab. You can then search the registration reminder and uncheck the box.

    After the computer restarts it shouldn't t appears more. Can you confirm this?

  • HP pavilion n203tx 15: Amd driver has stopped working and has recovered

    Hello ive been using this laptop for 2 years now and ive started suddenly get this error "amd driver has stopped working and has recovered" and sometimes one of the apps I open freezes and then I get BSOD with errror "AMD pilot State failure" any help would be appreciated.

    my laptop is Hp Pavilion 15 n203tx im using windows 8.1 I have amd radeon hd 8670 m graphics card

    Thanks in advance

    Hello

    Try this

    install the following in the same order

    Chipset: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63965.exe & Reboot

    Graphics: http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64573.exe & Reboot

    BIOS: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73288.exe & Reboot

    Or if you have assestent installed on your laptop supports HP run all updates of pilot who.

  • Pavilion dv6 fingerprint reader has stopped working

    My fingerprint reader has stopped working. I can open the Simple pass identification program but when I click on fingerprints, it indicates 'identity check' with an hourglass on the top of the icon of fingerprints, and no matter how long I wait, that's all that happens. All advice appreciated.

    -----------------------------------------

    Pavilion dv6t laptop 3100, Win 7 Home Premium 64-bit, 8 GB of RAM, processor i5

    "Where you go, there you are."

    Hi Mikey,

    Looks like you're running the Digital Persona of SimplePass flavor.

    Two things to consider / try, in order.

    If the reset works, you don't have to reinstall the driver...

    • Hard reset
    • Reinstall the driver

    Hard Reset:

    Sometimes, all you need to do is the computer suddenly.  This method works for a variety of connection and "glued" program issues.

    • Disconnect all the external devices first.
    • Remove the AC power and battery
    • Press and hold the power button while in the minus 30 seconds
    • Reinstall the power supply for the first start only * see Note
    • Power on - connect
    • Next time you shut down the system, replace the battery.

    * Note: You can ignore the little battery aside.  If you wish, replace the battery the first time and do it with her.

    =====================================================================================

    The pilot, from your Internet site:

    Validity fingerprint sensor Driver sp52354 V2.1.0.2

    • Install the validity sensor Driver installation package: it if called sp*.exe - the package will be most likely located in the downloads folder.  If you have control of "Admin", you can highlight the package and "double-click on ' to install it, otherwise just right-click, select"Run as Administrator"and install.

    I hope this helps!

    It's my pleasure to help.

    Say "thank you!" to the help by clicking on the star of Kudos to show your appreciation.

    Fixed?  Mark this message 'accept as Solution' to help others find the answers.

    Note: You can find "Accept as Solution" only on the threads started by you.

    Good luck!  Year of the Dragon!

  • HP Pavilion dv7 6b51ea: GPU stuck at Intel, AMD GPU has stopped working

    A year ago, I received a notification of the CCC AMD the driver update and did. Since then, the 7400 m has stopped working and still did not so after;

    (a) rolling back drivers

    (b) reinstall the drivers from the HP website

    (c) using the system to factory settings restore

    After some research I found that the discrete GPU in HP laptops only works with the drivers offered by HP, but those who fail to solve the problem of too.

    I put Powerplay use Max Performance and even tried to disable ULPS, which of course failed because the system is locked ' dynamic single setting.

    Active power plan still shows as powerful, but it's the GPU integrated in use, not dedicated

    Also recently upgraded to Windows 10, had no problems but GPU problem remains

    AMD Catalyst Control Center poster always I have 7400M and hardware of MSI Afterburner monitoring shows his temperature to 45 c but 0% use of the GPU.

    When running games that allowed, with Powerplay can jump on the 7400 M, still work on the weak integrated Intel graphics.

    HP Support Assistant cannot detect all problems, troubleshooting

    HP Pavilion dv7-6b51ea

    Appreciate the help.

    Thanks for your help, very much appreciated a response.

    Assuming that I am in a bind.

    HP should not make laptops for gamers or those who buy specifically for the use of the dedicated GPU, if they cannot upgrade their GPU drivers dedicated by the manufacturer of this GPU IMO.

    Sister with a DV6 bought with my DV7 (2012) was lucky, I tried the update before she accepted AMD update notification

    Guess I will gift to a parent who does not require the dedicated GPU and I'll have to make sure my next laptop supports the amd/nvidia driver unlike HP updates of course

  • The bridge has stopped working and I uninstalled it, but now the CC won't let me reinstall it

    The bridge has stopped working and I uninstalled it, but now the CC won't let me reinstall it

    It seems uninstall was not clean. Please use available in the link mentioned cleanup tool to remove the CC Br entries below.

    http://www.Adobe.com/support/contact/cscleanertool.html

    Please follow the instructions as indicated and then reinstall the CC Br.

    Kind regards

    Ashutosh

  • HP PAVILION NOTEBOOK N012AX 14: AMD - A10 5745 carrots not working. And speed changes do not

    Hello, I have this problem. My processor AMD A-10 5745 M has 4 cores, I can either change from 1 up to 4 cores. But then, when I change to 4 cores, I restart and it uses a lot of my ram, so I had to change it back as 2 kernels, then at the next reboot. I look again in my hearts. He said that I have only 2 hearts. And I can't change it to 3 or 4 my CPU cores. My CPU doesn't change, it kept being also 2.10 ghz constantly which is my maximum processor speed. But before all this happened, my Simultaneosly changed CPU speed. Help, please. I have had no recovery, what can I do? Is that a bad thing or so? Please answer as soon as possible.

    -Thank you

    Hi @RedCheesecake ,

    Thank you for visiting the Forums HP's Support and welcome. I watched your show on your HP Pavilion Notebook 14-n012ax and the problem with speeds. You could restore the BIOS with this document by selecting the reload the default BIOS settings that could solve the problem with the speeds and the fans.

    Here's a document on improving your system.

    Make sure that all updates are completed within the control panel or click the Windows key and start typing the laptop settings, then go to update.

    You could try a refresh of Windows 8. Please read the entire document before performing.

    Please let me know how it goes.

    Thank you.

  • HP ENVY 17 Notebook: HP support Assistant constantly reported as 'Stopped working' in the reliability report

    System recovered 5 days ago and reinstalled personal software. (HP 17 t-k000 CTO/Win 64 bit 8.1Pro)

    Almost immediately HP Support Assistant would communicate with HP Server. The program has been downloaded and reinstalled more than a dozen times during the 5 days... .rebooting every time between installs / deletion. Download from different places in the website of HP... but always version 7.7.34.34A. HP cat could not help... like that, the program worked for a few minutes, even though I showed the tech "reliability report". (it's a play on words!)

    After recovery was over and I used S.A. to update the operating system. The first time I used the program offered to me by 14 updates (so I guess that the program was "not" long before I got the operating system)... the program has shown the updates have been downloaded, but each time the update failed to install (X) next to the icon of installation. Restart the program again and selecting 'Check the HP updates now'... after displaying little pictorial showing ets connection/download... Returns a message... "No updates available". AND a new error is reported to the report reliability with the date and time. Now, in the last day or so IE11 has stopped responding... see below... Even typing this proved difficult because the page no longer!

    Today, the Web page for this laptop shows there are 2 BIOS update F34A (May 22, 2015) and F.09 Rev.A (16 April 2015), but as there is no update available via S.A. I haven't installed these either... my latest information installed BIOS is F.34, 19/12/2014!

    Battery/power cycling has solved nothing... "sfc/scannow" shows no error in operating system,.

    All suggestions accepted

    Thank you

    @Stu2009

    Thank you for all the useful information. However, there is something that you're not quite right about. It is true that normally the default account created on a system, is normally an administrator account. However as a safety device which is part of the User Account Control (UAC), he essentially keeps running as a common user, then on an administrator account.

    You can turn off UAC (I would not recommend that), or you can find the executable file of your programs, right click and compatibility mean that it runs as an administrator by default.

    Most of the time that you actually benefit from privileges program not raise unnecessary, however. Only a handful of things really really need to access that provides the "Run as Administrator".

    With regards to the BIOS, I would recommend that you try only a BIOS update if you are running in regular broadcasts normally. A wrong BIOS update can become a "brick" that requires a replacement of the Board of Directors, so for me it's one of those things you do only as a last resort, or if it's part of a fix recommended a functional system.

    As these updates from CyberLink you can always try to install it manually if you need, since the support page for your system. And let me know if they still appear in HPSA, after a manual installation.

    HP ENVY 17 t-k000 CTO Notebook PC (ENERGY STAR)

  • Webcam HP Pavilion DV6 has stopped working, it worked before, the message says webcam not started.

    The pre installed webcam works perfectly, but somehow, it works now so I;  I have re-insatalled Cyberlink software, but the webcam is not listed in devoce Manager, I get a message saying that the webcam is not started or is not found.  CyberLink Youcam software opens well, but the camera seems not to turn on. Is there a switch for the webcam harware? As there is a work around and turn off the WiFi? Perhaps a system configuration that controls what devices at boot time startup. It's as if the unit is just off, not activated, the close the lens light now, it used to.

    Your help will be very appreciated.  How can I activate my WebCam HP pre-installed?

    TIA

    It comes to my HP Pavilion dv6and the problem of my WebCam suddenly stopping.  I have posted two previous requests for assistance, does NOT see much in the way of answers.

    If I had held my breath waiting for some help or answers to this place - I'd be dead now days.  I tried everything I could think of; reinstalled the software, drivers.  But the error message was always the same saying that "the webcam was NOT turned on."  Back, through some other posts, that I could see that others have also had the same problem and all the guys from HP that mentions his HP job; has said was to reistall the software, or choose the webcam in the CyberLink WebCam software. but this option is still grayed out.

    So I just bit the bullet, because I had to do in the past.  I took off the inside of the plastic frame for the screen at the top and sides.  I had to unscrew two screws at the bottom of the screen frame to the hinges, under self-adhesive pads oval plastic/rubber.  In the Center, you can see the small Assembly of camera and microphone, with white wires, it will.  At that time, I had to put on a second pair of reading glasses, because the parts are so small.  I finally found a tiny multi wired plug-and - taken right of camera lens Center.  I loosened and then pushed with a small bamboo skewer.  When I buttoned up things up; and restarted the CyberLink WebCam driver program came to light on near the lens and the camera showed a live video image which aimed directly at me.  This plastic frame is very fragile and the two small screws will immediately far jump on the floor that you haven't cleaned vacuuming lately.  Has disappeared!

    I must say that I have had absolutely NO help from anyone at HP, I is uncomfortable taking my laptop apart to fix a poorly designed plug/plug obvious for the WebCam.  I like really this computer basically, perfect Beats Audio work for my deafness, I get more and more clear than any other volume laptop that I have tried over the past 20 years.

    I added Ram 16GBs of memory, but I have not noticed that much improvement, maybe when I make more digital video, CAD/CAM and photographics.

    I hope HP can get the image into the connector on the WebCam release and let us know how to fix it with a technology tech or something.  I tried searching and was NOT able to find the answers for my laptop either, I had the chance-out to allow him to run again, I hope you can get yours working again too.

    See you soon,.

    R & R

Maybe you are looking for

  • Could not get iOS9.3

    When I tried to download and install iOS9.3 my phone - a 5 - I couldn't verify the download saying that it was not connected to the internet. It was certainly connected. I deleted the download of iOS9.3, which was one of the patches recommended for t

  • Random Turn Off on new laptop

    Hello I got this laptop for Christmas and everything is great on the laptop, that everything works well except, as it turns off randomly and made a loud noise.I was wondering if it was something unique, but he keeps doing, so if anyone knows what to

  • storage crisis e motorcycle

    After the upgrade to android soak test version all the google apps r updated... I have a few apps of my own that is also installed. After leaving the marginal free memory. No space several other app updates. I think in a week memory cache will eat th

  • Link for RAV4 blackBerry Smartphones

    My BB 9810 Torch was related to my Toyota RAV4 with Bluetooth.  Phone worked and I was able to receive emails on the console screen.  Then I had to temporarily interrupt the connection, (don't remember why).  When I put it to the top again, Bluetooth

  • Is the owner of card mother Dell 0K83V0?

    Hello, earlier in 2010, I bought a Dell Inspiron 560, which had the following characteristics: OS: Windows 7 Home Premium 64-Bit GPU: Intel integrated graphics Processor: Intel Pentium Dual-Core E5400 Wolfdale Dual-Core 2.7 GHz RAM: 4 GB DDR3 Motherb