HP Pavilion P 7-1414: HP monitor

Similar Questions

• HP Pavilion Slimline s5-1414 connection LCD monitor & projector problem

  I bought a HP Pavilion Slimline s5-1414 with Windows 8, for my church, which came standard with 2 DVI ports. I attach a LCD monitor to 1 Port and a projector to another. Start the computer and both screens remained blank. I disconnect me the projector, restart the computer and the monitor running normally. I then connect the projector in the other port and it works as expected. However, when I restart the poster blank rest until I have do as above. I also reset the BIOS to the default settings, and both screen and projector came fine. Yet once, when I restarted, same problem. I manually set the resolution for both devices. Problem remains - every time that I reboot, displays may not run until I disconnect the projector, reboot, and after successful reboot, reconnect the projector. Any suggestions?

  Thank you for running these tests and getting back to me. I think that it is prudent to exclude at this stage of material. I have two options for you to try.

  I would like you to reinstall the graphics driver.

  Press the Windows key + Q to bring up the search

  Type 'unit'

  Click on Device Manager

  Expand graphics cards

  Double-click Intel

  Click the driver tab and click the uninstall

  Restart the computer

  Windows will automatically detect the missing driver and reinstall it on reboot. Once you are in the start screen of Windows, shutdown, connect two screens (a screen and a projector or two monitors, anyway) the computer turn on and I would like to know what the results are.

  I would also try both screens set before to turn on/off mode safe. You may need to press and hold the ESC key lighting to get the option come up, instead of SHIFT F8 as set out in section. Take a look at this article to get the procedure start mode safe. Let me know what you find

• 23xi HP Pavilion laptop audio cutting external monitor

  I want to use my monitor HP Pavilion 23xi as an external monitor to my laptop (Sony Vaio, Windows 7).  The laptop has only a HDMI connection, so I used a HDMI cable to connect it.  The HP Monitor works fine, but when it is connected, it cuts all the audio outputs on the laptop.  There is no sound the internal on the portable speaker or the headphone connection.

  If the HDMI connection automatically resumes the audio output, probably it would take at least a headphone jack on the PC?  I can not change the type of connection, because the laptop has only HDMI to an external monitor.  Y at - it no configuration changes will correct this?

  Hello

  As you said, the HDMI sound can resume sound, disable audio HDMI can help. Pleae try:

  • Right-click the "speaker" icon
  • Select playback device
  • Click with the right button on HDMI sound and turn it off

  Kind regards.

• HP Pavilion a6712f w / HP w2207h monitor. screensaver locks the Vista operating system. How to cancel a blocking?

  HP Pavilion a6712f w / HP w2207h monitor. Screensaver locks the Vista operating system. I have to cut the full powers to restart the computer. What's wrong? Checked with AVG. virus system. HP system checks OK.

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.  Restart the PC.

  Kind regards

  DP - K

• What is the difference between the HP Pavilion 25xi and 2511 x monitors?

  What are the benefits of the HP Pavilion 25xi on the HP Pavilion x 2511 monitors and vice versa?

  Hello

  There are little differences and all first they use TWO different technologies, using IPS and used WLED

  The 25xi IPS LED backlit monitor has the following features:

  • VGA, DVI - D and HDMI™ inputs

  • BrightView Panel

  • Supports High-bandwidth Digital Content Protection (HDCP) to prevent the transmission of unencrypted content high definition

  • Plug and Play capability, if supported by your computer system

  • On-screen display (OSD) adjustments for ease of installation optimization and screen

  • Security lock

• HP pavilion 23-b225d while a monitor screen

  Hello

  I just bought a hp pavilion 23-b225d all in one office.

  the seller told me that the monitor is monitor full hd LED, so I bought it but when I get home.

  I checked again with the HP official website, it is said "(23-inch) LCD screen high-definition display.

  now im so confused. in fact, the screen is LED full HD or hd LCD?

  Please confirm. thanxs much

  According to the specifications of all-in-one HP Pavilion 23 - b225d desktop , the screen is a "58,42 cm (23 inches) high-definition LCD display.» It is a Full HD (1920 x 1080 resolution) screen with a wide viewing angle field.

  Almost all flat screens HD are the LCD. Almost all flat screens LCD need a source of light, called a "backlight". This 'backlight' can be same edgelit LED, LED or CCFL (fluorescent). In addition, some manufacturers use the term WLED (white LED) instead of LED. Today, most lighting is done with LEDs, and quite possibly your screen is an LCD display with LED backlighting.

  Don't let the terminology trip you :-)

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Pavilion 23xw: no sound new monitor

  Where is the audio jack for a monitor of 23xw Pavilion? Just buy a new one.

  Do I need a HDMI VGA adapter for the pc is an older model with no HDMI or DVI connection

  Thank you

  In looking at the specs of this device, I see no mention of the speakers.  Here IS THE manual for this model.

• Desktop HP Pavilion p6580t CTO: How can I configure my desktop PC HP Pavilion p6580t CTO for duel monitors?

  I am trying to understand what graphics card I put in my computer HP so I can run 2 two monitors and I have to cut the design of the motherboard that is installed on the computer. I have a HP w2207h (22 ") w/VGA port monitor that I use. and a ViewSonic VP2130B (21 ") monitor that has 1 VGA DVI port and 1-should I wear as the second monitor. The HP monitor is the oblong shape type and the ViewSonic is more a monitor of type square. I don't think it would be a problem, isn't it? In addition, my power is 300W. I don't want to spend a lot on the graphics card that this computer is about 6 years old; just enough to get a Setup dual monitor works.

  Below you will find the info from my computer.
  HP Pavilion p6580t CTO desktop PC
  Model # WS326AV

  Operating system - Windows 7 Ultimate 64 bit SP1 (office)

  CPU - Intel Core i5 650 @ 3.20 GHz Clarkdale 32nm technology
  Carrots 2
  Son 4
  Name Intel Core i5 650
  Code-named Clarkdale
  Package Socket LGA 1156
  The 32nm technology
  Specification Intel Core i5 CPU 650 @ 3.20 GHz
  RAM - 8.00 GB memory DDR3 twin @ 665 MHz (9-9-9-24)

  Motherboard - MSI 2A9C (CPU 1)
  Manufacturer MSI
  Model 2A9C (CPU 1)
  Version xxx0204GRxxxxxxxx0
  Intel chipset provider
  Model of chipset Host Bridge Havendale/Clarkdale
  Chipset revision 12
  Southbridge Intel supplier
  Southbridge model H57
  Southbridge review 06

  Graphics - HP w2207 (1680x1050@60Hz) 512 MB ATI Radeon HD 5450 (MSI)
  Monitor
  Name HP w2207 on ATI Radeon HD 5450
  Course resolution 1680 x 1050 pixels
  Work the resolution of 1680 x 1050 pixels
  Active, primary, State support of output devices
  Screen width 1680
  Monitor height 1050
  Monitor the BPP 32 bits per pixel
  Monitoring frequency 60 Hz

  ATI Radeon HD 5450
  Manufacturer ATI
  Model Radeon HD 5450
  Cedar GPU
  1002-68F9 device ID
  Voltage v 0.900
  GPU clock MHz 650.0
  Core Voltage 1.000 V
  8.960.11.1000 driver version
  Version of the BIOS 113-AC50800-100 - MI
  Memory Type HyperMemory
  512 MB memory
  Width of the bus 32 x 2 (64-bit)
  Max power draw 20 Watts

  If there are questions please ask.

  Thank you...

  Hello

  The AMD 5450 in PC graphics card will support multiple monitors (VGA, HDMI and DVI).  The 5450 also supports AMD EyeFinity which allows bear monitors of odd size (different resolutions).

  You will get best results by using digital connections to the monitors.  It would be DVI HDMI for w2207 HP and Viewsonic.

  If you have specific questions about AMD EyeFinity, please consult the ATI/AMD forums.

  Good luck and thanks for posting on the HP Forum.

• Slimline s5-1414: Dual Monitors-What adapter to buy

  I am trying to add a second monitor to generic lcd (NEC) to this pc.  I am already using the adapter supplied with the computer in VGA. I always have a DVI port available. Looking at the cards I have no idea as to what adapter I need to buy to connect to my PC.  Can someone tell me what to buy or if you can not do? Thank you much in advance.

  @Procats, welcome to the forum.

  Here are the i/o ports of back on the computer:

  1. Figure: Rear i/o ports
  2. USB 2.0: 4

• Pavilion M8100n: adding a second monitor

  Add the second monitor and when I install a Nvidia GT240 it shuts the built-in VGA port.  If I have to I can remove the TV on board and put a card PCI standard video in it.  in any case to keep the video work shipped or turn back on?

  Tested the GT240 in another computer and it works

  2nd monitor has vga and DVI.

  Thank you

• Pavilion d4100y powers, but the monitor is blank and CD player will not open

  When I turned on the desktop computer today, it seemed to turn on, but nothing came on the monitor.  Normally, I can hear the disc turns, but it was pretty quiet.  I couldn't open the trays of CD player, even though he was technically under tension.  I tried to connect a different monitor with the same results.  I also tried the reinstallation of the material inside the desktop computer to make sure that everything had a secure connection.  No luck.  I tried to reset the BIOS with the keyboard steps (such as listed on hp.com), but I'm not sure that the keyboard has been recognized.

  I read a few other posts that mention replacing the power supply or the motherboard, but it wasn't a specific situation.  I would like suggestions.  Thank you.

  If the power supply fan is grinding so it's time for a new power supply.  Maybe it's time for the PC repair workshop local peek unless you want to try the repair yourself.

  These "How-to" articles could be useful.

  How to replace a power supply.

• Pavilion P7-1120: new necessary monitor - about connection

  My monitor is dead (6 years), so I need a new.  Support HP told me that I had to get one with a dvi - d and vga cable.  Most new monitors have both of these connections.  The VGA is necessary - I dvi - d connection.  Do I need a new computer to get the appropriate for the hdmi connection?

  Mike, welcome to the forum.

  Because your computer has a DVI - D port, you can simply us for the connection.  You don't need VGA, also.  If you want to use the HDMI, you can buy a USB 2.0 to HDMI video adapter.  StarTech makes these adapters.  If you decide to go in this direction, I suggest you contact their Custome Service to ensure that you get the right adapter.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion Desktop-550-110: Triple monitors?

  I have three 21.5 (1920 x 1080 resolution) inch monitors which have a VGA input. The computer I have has a hdmi, vga and USB 3.0 ports. Is it possible to have extended 3 monitors or I need a new graphics card.

  Hello

  The following link shows the specifications of your machine:

  http://support.HP.com/us-en/document/c04746474

  You certainly need more material and add a new card is the way to go. Please read the following article:

  http://www.Lifehacker.com.au/2015/01/how-to-set-up-triple-monitors-for-Super-widescreen-gaming-and-work/

  and

  http://multimonitorcomputer.com/top-4-best-videocard-for-multiple-monitor-computers.php

  Note: Yuor machine has only 180 W Μatx APFC power supply internal therefore, you also need a new power supply for your machine.

  Kind regards.

• HP Pavilion 22xi: HP Pavillion 22xi monitor tunrs itself after 1-3 minutes.

  Hello so I use my monitor for 1 year.

  It never happened until 9-10 months later when I played computer for like 10 hours.

  So my monitor turns off after 1-3 minutes.

  To activate it, I need only press the button.

  But its very annoying.

  I tried to switch the VGA/DVI cables, but I makes no difference.

  My mother extended 3-year warranty, we are planning to share my i don't know maby broken monitor one again.

  If necessary.

  Hi there @RokutisGaming,

  I hope you find your experience of positive Support Forum!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that your display is extinction itself after 1-3 minutes.  I'm happy to help you with this.

  Have you tried this display to connect to another computer and test it with this system? If so, you saw the same question?

  Have you tried a different display of the same type cable?

  Also have you tried using another video port on the screen?

  Please let me know the results.

• Pavilion c 500-277: two monitors

  I want to set up two monitors on this PC, but I can't see that it has only a single DVI (which I use) and an analog VGA port.  I would like to digital signals for the two montors I have the desire of the graphics high definition for processing photos.  What is the best way to achieve this?  I'm new to the idea of the USB to DVI connections and assume that the best solution would be to install a dedicated graphics card (which I know only the idea here, not the mechanics of this fact get).

  Any help is very appreciated.

  Hello

  You can add a video card to your computer usaing x 16 PCIe location

  Intel HD integrated graphics

  • This motherboard supports processors with integrated graphics card include: