HP Pavilion p157sa 15: 15-p157sa HP Pavilion in Windows 7 function keys

Similar Questions

• Pavilion Office H8 - 1130: after upgrade to WIndows 10, function key (F2) does not work, delete the folder

  After the upgrade to WIndows 10 the other day, I copied some 30 GB of videos and photos from my phone to a USB connected HDD.

  using Windows Explorer:

  -J' created a new folder

  -Use of function F2 key, I renamed the folder "New folder" to the 2015-16'

  -all good then I copied (low-pressure) the files in this folder

  Once done, I decided to rename the folder in different name

  -J' pressed the function F2 key to rename it, but press ESC' to abandon it

  -the file has been renamed to "new folder".

  -J' then pressed F2 to rename it and the file disappeared!

  -J' checked the trash, not there

  There you go. How can I retrieve these prics

  It is, but I cut/move the files in the DCIM folder on my USB key.

  I found the culprit.  The 'function' key lock keyboard sound, he was in no hurry.  This Microsoft keyboard allowed this option to disabled and completely forgot it.

  I've tried and tested again and this is the reason.

  Thanks for your post

• Pavilion 15: Problem of function keys.

  Hello

  I have a little problem with my function keys. Apparently, I can use them without pressing the "Fn" key on my keyboard. It's really annoying because I have other uses for these keys F1 - F12 and modification of custody whenever I try to use their brightness, sound, etc.

  Is there a way to disable this, so I can use the function with the function key options?

  Kind regards

  Ndiaye

  Hello

  You should be able to change the default behavior as follows.

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then make the relevant changes contained in the document on the following link.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• Pavilion 15-ab216nz: f1 - f12 function keys do not work

  Hello

  I shot this Pavilion laptop 15-ab216nz to win 10 to Win 7 64 bit.

  The function keys f1 - 12 do not work - what is missing?

  Thanks for the support

  The problem is resolved. Thanks for your reply.

  As the function keys have 2 different functions:

  (a) Act in accordance with the operating system (release e.g.F3, F5 reload, etc.)

  (b) Act as specific function of material (e.g. dim or bright the screen, increase or decrease the volume)

  (Usually one) is the default (without the combination with the 'fn' key) for b) to use the "fn" EHF.

  This computer works on the other hand, I discovered. There is no need to install the software.

  Kind regards

• Pavilion x 2 10-n101nv: how to change the function keys

  Hello I have the hp pavilion x 2 10-n101nv, the F function keys selection key works it is light slight increase use and on but if I press the fn becomes F1 F2 F3 f4, how can I change

  Hello

  You can change the default action as follows.

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02035108 & DocLang = in & docLocale = en_US &...

  Kind regards

  DP - K

• HP Pavilion 15t_ab200: downgrade HP Pavilion 15t_ab200 Windows 10 PRO to Windows 7 PRO

  Is it possible to downgrade my 15t_ab200 HP Pavilion of Windows 10 PRO to Windows 7 PRO?

  I tried to look in security and recovery section, but there is no option "Go back to Windows 7. In addition, I see no Windows 7 driver for this particular laptop model.

  I'm not familiar with Windows 10 in all. Help, please. Thanks in advance!

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number.

  

  HP series "15 t-ab200", your computer uses a 6th generation Intel chipset called "Skylake. Intel, remove support USB 2.0 since the chipset Skylake, so normal DVD and USB Windows 7 install does not work on the 6th generation of Intel chipsets. You must add USB 3.0 drivers in Windows 7 ISO using this utility Intel;

  ndows-7-USB-3-0-Creator-Utility https://Downloadcenter.Intel.com/download/25476/Wi

  After running this utility and direct to your Windows 7 ISO, ISO/USB/DVD that results must be able to install Windows 7 on your computer.

  You will also need the bottom driver for Windows 7 see hard drive... Extract the files on another drive flash usb without all records;

  tel-Rapid-Storage-Technology-Intel-RST-RAID-Driv https://Downloadcenter.Intel.com/download/25165/in...

  You will have to perhaps install the bottom driver to make usable USB ports in Windows 7.

  https://Downloadcenter.Intel.com/download/22824/us B-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Contr...

  You need to ENABLE 'Secure Boot' and 'Legacy Support' in the BIOS before installing Windows 7. There may be other BIOS settings that need to be changed and you may need to provide USB and/or AHCI driver before the installation will proceed.

  Many Windows 7 drivers for the Software page and the driver HP Pavilion Notebook 15 t - ab000 CTO (ENERGY STAR) - should work on your computer. Please do not use BIOS and download the firmware for this model.

  Please post of Device Manager "Hardware ID" (just the text string will do) for these devices you are having problems with and all the others who are listed as missing or unknown devices as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP pavilion d4790y windows Vista cannot connect to internet unless you use WEP wireless

  I have a HP Pavilion with Windows Vista 32 bit home premium d4790y.  I can connect to my ISP wireless router using the HP internal network adapter, but the connection between the router and the internet does not work unless I downgrade the router security to WEP.  If I connect to the router via a wired connection, I can connect to the internet without problem even with WPA2.  I did all the troubleshooting steps recommended as reset the router to check updated network adapter, uninstall/reinstall the network adapter driver, driver release and renew the ip configuration, etc.  Information?  Is there a newer driver that is not recognized during the update search process?

  Hello

  It is a hardware thing and the wireless card does not support this. Changing the wireless card can be the way to go.

  I hope this helps.

• function keys on HP Pavilion

  Hello

  We just bought a HP Pavilion laptop to replace our old Toshiba one (although begins to regret now). One of the most annoying things on the new computer is that the function keys requires that you press the FN key in order to make them do what the function key for decades! That is to say in order to refresh a Web page, you need to press FN and F5. How can I disable this ridiculous? I read something on line on the use of "BIOS" even if I can't find where it is on the computer

  Any help is appreciated until I throw the thing out the window!

  Thank you

  Adam

  Hi Adam,.

  You can change this behavior as follows.

  Shut down the laptop - if you use Windows 9 or 8.1, hold down the left SHIFT key while you click Shutdown to temporarily prevent a hybrid boot.

  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• How to calibrate color on hp pavilion with windows 10 g7-2202

  Hello!

  How to calibrate color on hp pavilion with windows 10 g7-2202?  I am a photographer with limited funds, so I can't buy a dedicated monitor again.  I would like to get the best possible colors before it goes to print.  I got prints back that doesn't look anything like the monitor.  It is therefore difficult for post production.

  Thank you!

  Hello Brenvon62,

  Color grading is already done by Windows on laptops, but if you want to calibrate, and then follow the steps

  1. Click Start
  2. Search "Control Panel."
  3. Click on appearance and personalization
  4. Click on display
  5. In the left column, click the calibrate color option
  6. Follow the on-screen instructions

  I hope this helps! Please mark this procedure as an answer if this helps and Bravo will be appreciated.

• How do I access the function keys without having to press the fn on Pavilion g6 series

  Hello

  I just bought a g6 Pavilion and it's all good, except a big problem. For function keys, I have to press on the key fn first! It's horrible! Please fix. It should be easy to fix. This should be configurable. Come on, please don't play with the function keys. We need for programming and many other productivity software where these function keys used regularly. I hope that there could be some obscure settings I can you to reverse this relationship, I want to say I press the fn key only if I need to access the features of HP spare put on the function keys, not the other way around.

  Hello

  Shut down the laptop.  Tap here to f10 you start towards the high access the Bios Menu and make the change that is described in the document at the link below.

  http://support.HP.com/us-en/document/c02035108

  Kind regards

  DP - K

• How can I restore my system HP Pavilion with windows 8 to factory settings

  I have a new (2 months) HP Pavilion with windows 8. I am trying to reset to factory settings and need help.

  Hello

  There are three main ways to restore your laptop to its 'Condition of the factory' - see the document at the link below.

  Performing a HP System Recovery - Windows 8

  Kind regards

  DP - K

• HHD has failed and needs to be replaced on my out of warranty Pavilion DV6 (Windows Vista)

  I have a laptop DV6 Pavilion running Windows Vista that I bought in 2009.  I realize that is no longer under warranty HP so I have to pay for any changes or corrections to this computer.

  Earlier this week, the hard drive (the one included with the computer) failed with error 03f0. It is my understanding that this error is a fatal error and the drive is essentially 'toast '... Unfortunately, I do NOT have a backup of the image of that hard drive. I have just the recovery disks that I created when I got to the computer originally.  I quite like this computer I would try out running back (if possible) without having to spend a LOT of money. In my simple mind how how I get this computer running and upward would buy/install a compatible replacement hard drive and boot the system with the recovery discs. Unfortunately, I think my plan is simply probably naïve and I probably need to do other things. So I need some advice before you start this process and possibly wasting my time and money.

  I need answers to some of these questions:

  -Will it record Windows/Vista OS and more recovery disks to get the computer running with a new hard drive?

  -If I need Windows OS disc, can I go directly to Windows/8?  OR do I need start with Windows Vista and then upgrade to Windows/8 later?  Use recovery discs and all Windows operating system? OR I can get running with just the disks in the Windows operating system?

  -If I can get the hard drive and Windows operating system loaded, I guess I need HP drivers, etc... Does it mean that I have to get the disks from HP's Windows operating system or can I get it from Microsoft or Amazon and download the drivers from HP later?

  Thanks to anyone who can help me here for advice! It will save me a LOT of time and money.

  This is the Manual:

  Repair manuals

  See Page 69 for hard drive installation instructions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find

• Pavilion a735w: pavilion a735w windows 7 32 bit-compatible ethernet controller

  I have improved my pavilion a735 windows xp to windows 7. All my drivers are working except my ethernet controller. and I can't find a driver of ethernet controller. Can someone post a link to a driver comptible please?

  * Technician Internet future *.

  You must use the support page for your PC XP driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-23163-2&cc=us&DLC=en&LC=en&OS=228&product=435559&sw_lang=

  The driver file contains more than one model of the drivers ethernet driver, so you will need to find and install manually one that matches the hardware ID your ethernet controller has.

• I have a HP Pavilion with windows vista, can I create recovery system on dvd - r discs? Donkey1

  I have a HP Pavilion with Windows Vista a6214x.  About 3 years ago, I created my recovery with 2 discs dvd - r system

  I never had problems by creating discs and my HP troubleshooting and maintenance guide says that I could use either

  the dvd - r or dvd + r. But the other day, technical support of HP said use the dvd + r to create system recovery discs. If this is the case, I have to start all over again and create Sytem recovery discs on dvd + r?

  Donkey #1

  The DVD creation has always been a unique event. I'd be surprised if it worked.

  HP can tell you how to reset the utility.

  Reviews by HP on the use of the DVD + R

  http://support.HP.com/us-en/document/c00882383

• Unable to access Windows Update HP Pavilion dm4 Windows 7 64 bit

  My setting for Windows Update has always been - automatic.  When I realized that the update had done nothing since April, I tried an update manually and repeatedly getting the message: ' Windows Update cannot currently check for updates because the service is not running. "  You may have to restart your computer", I restarted, tried MS 'FixIt' - no change.   64-bit HP Pavilion dm4 window 7

  Paul - the link was not one I wanted to try. I found this fix on the Forum of MS response:

  Go to Control Panel > click on Windows Update

  Click change settings (upper-left)

  under updates, click on the drop down arrow

  Click never check updates

  Press OK

  Close the Control Panel window

  Then the closing session and Re-start Windows fresh.

  When you're ready, go back into the Control Panel > click on Windows Update

  Click on change settings (upper-left)

  under updates, click on the drop down arrow

  Now make the choice you need for automatic updates

  Press OK when done

  Close the Control Panel window

  Then make a fresh visit to Windows Update.

  If you have already tried the fixes that didn't work, the foregoing can at least get a point better, "but with update errors then you can do a system restore.  I did mine to the last point of "automatic system restore" which was 31/05/12.

  It worked for me and I spent 2.5 hours installing all missed updates.  My computer works better when it is new!