HP Pavilion P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7 to connect the Sony HC20 Handycam.

Similar Questions

• Airport utility does not support my Airport - options to change the channel?

  I have an older Airport - extreme, I think, and the utility does not support.  I'm out of luck to change channel?  Time Warner said their modem did not support my newest Airport (? it's TWC) and now the internet keeps smoking at least once or twice a day.

  I suggest that you keep it simple.

  Your airport automatically analyze and choose the best channel to use when it lights up. So, if you have not done for some time, powering to the airport, wait a few seconds and then put it to the top.

  Even if you could change the channel... How would you know which channel to choose?

  Time Warner said that their modem did not support my most recent airport

  Time Warner will only support for a product they have received for you.  But this does not mean that a router from Apple will not work with their service. I've used Apple products for over 10 years with Time Warner.

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• HP Pavilion g6-1233sl does not support recovery of Crete

  Hi all

  Just trying to create a recovery media from my laptop using HP Recovery manager, but it seems that something does not.

  Actually, I run the program, it tells me that I can creat that ONE copy of the recovery media, I have accept and support on continue, in the next screen waiting for something (I guess as support for inclusion), then I try to run:

  1. to insert my external drive usb, nothing happens.

  2. to insert a blank dvd into the dvd burner, nothing happens.

  Here is a screenshot of the problem:

  

  any idea on how to get a copy of the recovery media?

  I contact HP and request a set of recovery discs, ask the tax be waived because you cannot create your own due to an unknown problem.  1-800-HPInvent

  Don't know why HP chose the main partition, see this page if you want to change the any of the partitions, important reading.

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-REPARTITION-HDD-of-HP-notebook-with-pre-loaded-Windows-7/m-p/742019

• Pavilion dm4-1265dx does not start after Windows 7 logo

  My laptop does not start after the "Starting Windows" screen when I try to boot the operating system normally. When I try to run the repair mode from the start nothing happens... I get a blue background image and the pointer of the arrow, but no icons or windows appear.

  I tried the system diagnostic mode by pressing ESC when turning the laptop on and the hard drive test fails every time, showing the following results:

  Test Drive: 1
  INTELLIGENT control: passed
  DST short: failure

  Failure ID: 64RG79-5AP62V-XD6U2K-60RN03
  Product ID: XZ298UA #ABA

  Hard drive 1

  --------------------------------------------------------

  Test drive: FAILURE

  How should I proceed? The laptop is still under warranty, but it was purchased in the United States, and I now live in the Brazil.

  Hello

  You will need to replace the hard drive.

  HP should send you a new drive for free, but in your case is a little complicated as you mentioned it already. Please contact HP tell them about this situation. How to do?
  Click on the link below and choose your country:
  Contact HP worldwide

• "the key to upgrade to an edition of windows does not work with Windows Anytime Upgrade" was the message received when you use the code comes to purchase Microsoft online. Any suggestions? »

  Upgrade Windows 7 Home Premium to professional.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• "Update info" link does not work in Windows 8 by using the Microsoft account

  I have Windows 8 Pro. I had signed with my Microsoft account.

  Recently, I ran into problems of synchronization and so had to sign out and sign in my account from Microsoft on my PC in Windows 8.
  I have 2 steps check activate my Microsoft account and authenticate using the authenticator application for Windows Phone 8.
  I signed on the Microsoft account on my PC after switching to a local account and on the Microsoft account. I used normal password (not the app since it does not accept it). Successfully signed in, she says that the parameters can not be synchronized until I've "update info" in my Microsoft account. I know it asks me the passcode generated by the application, but the link is dead. Here is the screenshot of the link.
  
  How can I make it work?
  Reset my PC isn't an option. I can't afford to lose everything I have in there. In addition, a system at this stage image backup is useless for obvious reasons.

  Hi Ram,

  As the link update security information is dead, you can connect to the Microsoft account directly and update security information.
  Here is the link: https://account.live.com/summarypage.aspx

  Why should I verify my email address?
  http://Windows.Microsoft.com/en-us/Windows-Live/account-verify-ID-email-address
  Security information for the Microsoft account: FAQ
  http://Windows.Microsoft.com/en-in/Windows-Live/account-security-password-information

  Let us know if that helps.  If the problem persists, please answer, we will be happy to help you.

• External hard drive does not work on windows 7 after using the external hard drive on a mac (osx 10.7)

  title says it all. It does not open on autoplay and does not anywhere, but is always works on mac

  http://www.Mediafour.com/products/MacDrive

  If you want to use the drive to read and save files on both mac & PC I think that you will need create separate partitions on the disk, a formatted for mac and one for the PC.

  The utility linked above only allows access to a mac formatted drive and access the data, having never had to use it I don't know if it allows you to save files PC to the mac player

• Why Surface does not support WTV (Windows 7 Media Center recorded TV) files?

  I have a Windows 7 Media Center, and if I try to open the WTV Recorded TV files I just get a pop up asking me if I want to find an app in the store to play this file format.  Why the Surface can not read files WTV in Windows 7 Media Center?

  the bottom line is because there is no decoder DVD on the Surface. If you convert to the
  MP4, the file will play.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Pavilion 15 laptop: HP Pavilion 15 computer PC2170 laptop does not boot to Windows - 2 years

  Hi, my Hp Pavilion is only 2 years and 2 months (not very old at all) but suddenly it does not start in Windows, it hangs at the HP logo screen, it starts with an HP logo screen then goes to another screen of the HP logo, and then freezes. I can't get into safe mode.  I got in the Hp diagnostic screens and I conducted tests on all and everything.

  I did a hard reset, still frozen.

  I removed the cover, he went out and placed him in, still nothing.

  Whenever I have to try and reset it, he said administrative privileges is necessary, but there is no administrative privileges on this computer.

  There is no restore point.

  I ran chkdsk via the command prompt and had no error.

  I tried running sfc: scannow but I had which was something in the meantime and could not do.

  The laptop is: laptop HP Pavilion 15 2170

  A6-5200 APU AMD processor

  Can someone computer whizz out there enlighten us on this you problem, please.

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Satellite A210 (PSAEG) - Microphone does not work on Windows 7 64 bit

  Hello, the microphone does not work on windows 7 64-bit, the driver that I use is 64-bit Windows Vsta. The volume is implemented maximum and so is the amplification but no way to make it work with the software assistant camera Skype or toshiba.
  Can someone help me?

  Thank you

  Hi Largo09,

  Usually, you need to install the webcam driver and sound to get the microphone working. The microphone is a part of webcam

  As you wrote, Satellite A210 is not Windows 7 64 bit supported, so the only option you have the Vista 64 bit drivers

  In my opinion, you should check if the Microphone is turned on in Windows audio settings. There you can also activate the Microphone Amplifier, which can increase the volume of the microphone.

• I get this pop up that says: fonts "Segoe UI" does not support the "Regular" style

  original title: I get this pop up that says: fonts "Segoe UI" does not support "Regular" style... what the * is and how I keep popping up?

  I got a new Dell and of course a MS problem starts to play with me?

  Hello

  (1) not the problem in safe mode?

  (2) have you tried the steps suggested on February 2, 2012?

• HP Envy TouchSmart 360 x: plugged in, does not support?

  Recently I used my laptop to play Fallout 3 for a fairly long period. Last night when I closed the game my battery indicator says plugged in, does not support. I tried to uninstall the control method compatible battery and reboot, but that did nothing. This is the second time that this happened to me, but the first time that the battery just started to load it again without doing me something for her, but this time, nothing works. I can't take out the battery and test anything, without the battery because I don't trust myself to disassemble my laptop because the battery is inside. When I use the HP Support Assistant to check the battery, it is said that it is ok and the battery indicator indicates that he is in charge, but about ten seconds later it stops to load and the auditor of battery indicates the battery status is unknown. Is there something wrong with my battery?

  @Are_Zee,

  Hello and thanks for the display on the HP support forums.  If you experience a problem when the battery is in fact showing ok and does not appear in the indicator so that you can do is try to do a system restore before the problem started to see if it's the software causing the problem.

  So you can try to perform a calibration of the battery.  Here is a link to help you with that.

  HP laptops - test and calibrate the battery (Windows 10)

  Please let me know how it goes.

  Thanks again for posting and have a great day.

• Speech recognition does not work in Windows 7

  Original title: Windows 7 and speech recognition

  I try to use speech recognition (Microsoft) on Windows 7. Whenever I have try and use it after a few seconds it stops working. I looked on the Microsoft website for updates or tips on the memory required etc. Any suggestions? I have the latest service pack applied. I have 2 GB of memory should I more?

  Thank you
  Anne

  Hi Anne,.

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Speech recognition does not work in Windows 7.

  The problem may occur if the microphone is not close enough to the voice or the microphone input is too low.

  Do you get any error messages?

  To check if the problem is for the above reasons, I suggest to visit:

  Why the computer does not understand my voice commands?

  http://Windows.Microsoft.com/en-in/Windows7/why-doesn

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.