HP Pavilion p6-2: problems on blocking down after I installed the new power supply on a p6-2207ep

Similar Questions

• Pavilion NC768AA #ABA: HP Pavilion model. a6719f new video card with the new power supply?

  Hello!

  So, I won money to buy (hopefully) a new video card!

  However, I have a problem.

  I don't know which one to get!

  SO, someone please, please recommend a video card for intermediate level games.

  (My budget is less than $280)

  My PC has stock everything.

  Thus, it was purchased as it was when you would get everything first he.

  Yes, I need also a new power supply that is included with my budget.

  Thank you!

  Revionion, welcome to the forum.

  I'd be happy to help you in your choice.  The main problem is, recent video cards require UEFI in the motherboard instead of a standard BIOS to legacy.  HP didn't start using UEFI until mid-October 2012.  The latest maps not requiring UEFI were the series GTX 640.  However, MSI has made a card that has a VBIOS hybrid which can operate with a BIOS.  The best thing to do is to choose a video card you like and contact Technical Support from the manufacturer to ensure that it will work on your computer as it is almost 7 years old.  This will save you problems.  They are the experts on their cards.

  I like Corsair power supply units (PSU).  I suggest at least 500W.  This will give you plenty of power for any card that works in your computer.

  If you have any other questions, let me know.  I'll be happy to help you.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• My display driver blocks repetedly even after I installed the new driver. What is the problem?

  Hello. my graphics card stops repetedly to the point where my computer is going to empty my system files. Then, he take me several attempts to get the display works again just to make it stop again. I did research to find out what kind of drivers my system takes and installed them accordingly. Unfortunately the prosists still problem. Can you help me? I am runing a vista Home Premium 64 - bit OS.

  Thank you

  Tony S

  Hello

  1. do you get an error message?

  2. What is the brand and model of the computer?

  3. Since when are you facing this problem?

  4. What is the brand and model of the video card?

  I suggest you run the troubleshooter of material and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  I suggest you to update the drivers for the video card.

  To find the manufacturer and model of your video card:

  1. click on the ORB Start and then click Control Panel

  2. click on system and Maintenance

  3. under Device Manager, click on devices and equipment display

  If you are prompted for an administrator password or a confirmation, type your password or click continue

  4. develop graphics cards

  Under display adapters , you will see the manufacturer and model of your video card.

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• Impossible to install the new printer, Pixma MG5320 without error "setting up the network printer down.

  I have a new all-in-one Canon Pixma MG5320. I am unable to get the installer to finish with on "setting up the network printer down." Despite numerous attempts to:

  (1) download the driver on the internet instead of the installation CD.

  2) with the help of msconfig with selective startup and disabled all programs except Microsoft.

  (3) creates the new administrator account and returned through it all.

  (4) turned off firewall and anti-virus

  The error is compatible and I never have the unit set up under devices and printers. The installation is carried out without any errors marked and you will see the error if you get into the details of setting up and get him. The computer sees the printer when it finds and he answers. The printer and the router, both seem to be communicating correctly. Repair auto and troubleshooting programs I ran as fix - it do not detect errors. The printer works fine through a USB cable. I don't want to continue to use USB because that's why I wanted to go wireless. I'm sure that I forget some of the things I went through in my attempts to get this working. Anyone with any ideas or know what's going on please help.
  Tech of Cannon was very knowledgeable and says he sees this once a month. He believes that some program interferes with the installation process. I do thanks in advance. Nice day.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  From the description of the problem, you are not able to install the printer Pixma MG5320. I'll be happy to help you on this question.

  Let us try the steps from the following link:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• After you install the update, I get this message on an application Facebook '502 Bad Gateway nginx' what is the problem and what should I do to solve the problem?

  After you install the update, I get this message on a Facebook '502 Bad Gateway application
  Nginx' what is the problem and how do I solve the problem?

  See also:

  • http://en.kioskea.NET/FAQ/15289-Google-nginx-404-error
  • [811399/questions/811399]

• I want to know how to remove the back cover of my HP Pavilion Sleekbook 15 to install the new memory?

  I want to know how to remove the back cover of my HP product name: HP Pavilion Sleekbook 15 to install the new memory?  All site shows HP Web is how remove caches memory.  Unfortunately, with the newer models like mine, the whole back cover needs to be removed.  I have tried in vain to remove it, but so far all that I managed to do is scratch my cover.  If anyone can help?

  Dear David

  It's a very good idea, it would also be a good excuse to use my new phone for this.  So I'll say thanks again for the good advice.  Have a great weekend you Mr.  As I said earlier, you're a star...

  Yours Sincerely

  Alan

• Problems with installing the new version of hp support assistant-sp54373

  I have a Compaq Presario CQ60-202US running Windows 7 Home Premium 32 bit.  A regular HP support assistant began

  and have downloaded the new version of HP support assistant (sp54373) and after installing the new version and rebooted the software he gave me a ' year error occurred "and the HP support assistant stopped working!

  I then tried to uninstalled HP adj. and got an error during the deletion process, so I couldn't finish the deletion process, so I did a system restore to a good configuration, so the older version of HP Asst. (ver. 6.0.5.4) can be used until I can get this fixed a problem.

  If someone had the same problem and someone has suggestions on how to solve this problem; any help would be appreciated.

  Thank you!

  Hello

  Try Microsoft 'Fixit' on the link below.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Kind regards

  DP - K

• Adobe Application Manager corrupt - are trying to install the new copy will fail because the AAM is missing according to dump record installation - how to fix this chicken in the egg problem?

  Adobe Application Manager is corrupt and allows a reinstallation try Fail Adobe Acrobat Pro XI - try to install the new copy of the AAM fails because the AAM is missing according to dump record installation - how to fix this chicken in the egg problem?

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | Build Version - 9.0.0.244

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | Exploitation forest verbosity level set to 4

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | CREATING Instance PIM...

  06/04/16 16:23:29:507. [FATAL] |  | USS | PIM | PIM |  |  | 6256 | Detected db journal file, Adobe Application Manager is in a State damaged to C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp

  06/04/16 16:23:29:507. [FATAL] |  | USS | PIM | PIM |  |  | 6256 | Adobe Application Manager is needed to solve this problem. However, it is missing or damaged.

  Download a new copy of Adobe Application Manager of http://www.Adobe.com ,

  or re install this product.

  06/04/16 16:23:29:507. [FATAL] |  | USS | The installation program. The installation program.  |  | 6256 | Cannot create the PIM item

  06/04/16 16:23:29:507. [INFO] |  | USS | The installation program.  |  |  | 6256 | Event generated Guid is: "986b04a2-3099-49fd-9067-df69c36ff2b2."

  06/04/16 16:23:29:507. [INFO] |  | USS | The installation program.  |  |  | 6256 | Event generated Guid is: "e5f02581-649c-49ec-a265-800eeb5ad426."

  Does anyone have an idea what to do? I use Windows 7 as operating system

  Hi Ruedigerd91465945,

  Well try download and install Adobe Application manager from here: Adobe - Adobe Application Manager: For Windows: Adobe Application Manager: thank you

  Before installing kindly, restart the machine and then rename the folder in C:\Program Files (x 86) OOBE \Common Files\Adobe\OOBE\PDApp as OOBE_OLD

  Let us know if that helps.

• If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  If I started a project in first Cs5 and want to finish it in first Pro CC it causes problems exporting my sequence and get into the new software?

  Better is to import the cs5 project in the new project of CC.

  And Yes this could have problems, he could not.

  I would have ended up in CS5. Export to the lossless format and encode with SOUL CC until the final destination.

• Hello everyone, after correctly installed the creative cloud adobe now I want to update, the program also tells me to do. But the problem is that connection only goes up to 2% and stops, every time freaking. Weeks before. What is the problem? And Yes

  Hello everyone, after correctly installed the creative cloud adobe now I want to update, the program also tells me to do. But the problem is that connection only goes up to 2% and stops, every time freaking. Weeks before. What is the problem? And Yes, there is an internet connection

  Good afternoon

  Thank you for your response. It was the right solution, but I missed something in your response. I had to start several times to download / update. Throw/delete (or the procedure of the description) files don't get past not like you described, but I tried something myself and it worked finally.

  But I have to ask: If this problem continues, of course, that a workaround is available, why is this a problem in the software persists, exist?

  Maybe you can't give answers, but I'm just wondering, well thanks for your help.

  Green eyes greeting

• A popular problem; Failed to install the new creative tool of cloud

  Sorry to bore everyone to death with it but after manhandle my way through literally piles of bits of son, etc. off google, the end result is a lot of confusion.

  My situation: running win 7 64 bit (uptodate)

  I've been running the tools creative cloud for nearly a year, but this last development day, or maybe that's not the last, but the update in June... left me unable to install the new tool CC.

  When I run the Setup, it ends with the message, stupid and unnecessary:

  "We encountered the following problems:

  Office of creative cloud could not be installed.

  So far no tool failed to start, at least not the ones I use regularly (PS, LR, bridge, etc.)

  Then, I see some messages suggesting the "cleaner" and when I read the README with it, sounds really time consuming and a royal pain to follow the instructions... all the backup etc etc etc.

  I hope someone can put into a kind of overview of how to proceed here.  I've read a few reports of people succeed in getting after the problem... but not a discription of how they did it.

  I really don't want completely disturb my work and my time through plans heavy to see it did not work and no progress has been made.

  So if there is a set of measures to take that are likely to put an end to the success please someone have them.  I have not found a complete discription of how to proceed.

  Harry please follow the following steps to reinstall the creative cloud application.

  1. Rename the OOBE directory located in C:\Program Files (x 86) \Common Files\Adobe\OOBE to OOBE_OLD
  2. Reinstall the Application Adobe Creative https://creative.adobe.com/

• HP Pavilion dv6-3150us Entertainment Notebook not start after sitting on the side.

  Hello! I have a HP Pavilion dv6-3150us Entertainment Notebook that works under Windows 7. Last week, I traveled with him in Florida, and when I arrived and tried to turn on the laptop, it wouldn't start. The screen was white with thin lines going through it and the screen turned slowly black. I disassembled the computer and put it back together (which I have experience with, I installed a new fan at the beginning of last year) and he came in safe mode. This ihappened still once I put the laptop in my bag on back and then he pulled out a few minutes later (without even moving) and when I got home. I tested the hard drive and memory, and they both passed. Other that this question, the computer has worked fine. I need to get this problem solved, because I am a PhD student and travel frequently with your laptop. Could someone help me please? What causes this problem? Thank you.

  Hey irol72,

  Welcome to the Forums of HP Support! I understand that your HP Pavilion dv6-3150us is not initialize after being on his side, I understand your frustration and I would start you the black screen troubleshooting with no. Error Messages at startup or start-up.

  Thank you

• HP Pavilion 550-055na: new disk will not install the new operating system

  Hello

  I bought a new HP Pavilion 550 - 055na with Windows 8 a month or two ago but want to use Windows 7. However, I decided that I will keep the hard, the PC came with, and have the option of Windows 8 in future if I want. So, I'm installing Windows 7 on a new hard drive.

  My problem is that the new copy of Windows 7 will not install on my new hard drive.  I get:

  Violation of secure boot

  Invalid signature detected. See the policy in the configuration of secure boot

  Then me to a black screen after I pressed Enter/Ok, who said the following.

  Check the presence of the media...

  Media present...

  On IPv4 PXE boot.

  If I press F12 on power on, I get a blue box asking me to select a boot device. The only options are:

  Realtek PCIe GBE Family Controller IPv4
  

  Realtek PCIe GBE Family Controller IPv6

  and the output by using the arrow keys

  How to change the secure boot strategy?  If I do, it means that I can install my 7 can I on my new hard drive? Also, providing that I do, I always will be able to use my Windows 8 OS drive after changing the secure boot strategy?

  Any help would be appreciated to greately.

  Sincere greetings

  DJ

  Hello:

  You have to enable the legacy mode and disable start-up secured in the BIOS to be able to install and run W7.

  Please see this link to find out where these settings... this references adding a video card, but this is how you change the settings no matter why you need to change.

  http://support.HP.com/us-en/document/c03653200/