HP Pavilion p6-2104ed: 960 GTX prevents the computer start

Similar Questions

• Enter circles w / message 'the computer started using windows... installation media. »

  Through installation for Windows 8, but keep running in this message:

  "The computer started with the help of the installation of windows media Remove the installation media, and then restart your computer so that Windows starts normally. Then, insert the installation media and restart the upgrade. [Do not select |] Customize [Advanced] | to perform an upgrade".

  I've done a few times and just going in circles. Any guidance will be HIGHLY appreciated.

  Thank you!

  Hello

  Thank you for your response.

  I understand your concern.

  What is the brand and model of your computer?

  I suggest you to updating the BIOS of your computer from the manufacturer's website and then try again to install Windows 8

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  See also:
  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  I hope this information helps.

  Thank you

• After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  Sounds like an Energy Saver preference, but what computer do you use?  A G5 (PowerPC) machine will not work on El Capitan.

• How can I configure numerical Lock ON when the computer starts?

  I have a new laptop HP G70.  In the User Guide HP G70 on keyboards - C01540939.pdf, paragraph 3 using keyboards & pointing devices, Page 8 there is a note "the function of the keyboard that is active when the computer is turned off is restored when the computer turns on.   This does not work on my computer HP G70.  It always starts up the number Lock OFF.   How can I configure my computer to set the digit Lock ON when the computer starts?  I always use the number keypad and never use page up/down - button on top/bottom/right/lelt arrow.

  Also, how can I configure my computer to set the touch mouse on the computer OFF for the start.  I always use an external mouse.

  Any help would be appreciated.  It is a simple thing, but the present operation HP G70 is most annoying.

  PLEASE DO NOT CONTINUE TO MEET THIS PROBLEM!

  THE HP G70 WAS FAULTY!   EACH HP G70 HAS THIS PROBLEM!

  HP REPLACED MY HP G70 WITH a HPdv7.  THE HPdv7 PERFORMED THE DESCRIBER NERMAU LOCK FUNCTION AS IN THE HP INCTRUCTIONS.

  .
  
  Bob_in_PGI

  I'm surprised that nobody knows how to set the Num Lock at startup before you connect.  Where is the help of HP?

  I now have Windows 7 64 bit.

  There must be someone who knows how to do this.

  Bob in PGI

• When the computer starts, it reads configuration updates 1 3-0%; not updated since 12.8.09, showing 8070002 error

  When the computer starts, it reads configuration updates 1 3-0%, but it continues
  Latest Windows Update 12.8.09; do not update since 12.8.09
  Display of error code 8070002.
  Mechanic charged and removed the registry and advanced system care3

  Hello

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  ------------------------------------------------

  Check the above and you may need to use these methods to interrupt the cycle.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• Software HP C4380 printer causes delays when the computer starts.

  I don't know what triggered the problem. I had unplugged the printer and reinstalled. Now, when the computer starts, it hangs for 2-3 minutes seeking a device to the USB location 0. That remove the HP software solves the problem. I installed with the latest HP drivers and tried to use only the printer drivers without the scanner software. If I avoids the HP software, Windows installs with a Jungo win driver that causes the same result. It could have been an update of my Windows XP Home SP3 in the meantime I demolished the printer and reinstalled, but I can't follow any other changes.

  Now the printer is useless because of this problem. HP forums suggested disabling a program of tracking of HP under Services.msc, but who has also failed to solve the problem. Any suggestions?

  check the clean boot state, this might help you http://support.microsoft.com/kb/929135

• Launch of the program in an entire window every time that the computer starts caching

  Problem is that I have the program launch Cache in a full window every time that the computer starts. Stupid! It should start only in the system tray. Imagine every other startup program starts in a full window from the start. Is not acceptable. Also, I had disable the security function in the control panel of Windows 7, which allows the programs to make changes to the computer or leave it in a message box whenever he throws. Fuck that person nothing told me on this software is so much in need. In a chat online SanDisk said it's just the way it was designed.

  You can choose to not launch the application at windows startup ("do not start with windows" option). The caching engine still works without the GUI app.

• How to remove temporary files, waiting to be written to disk when the computer starts? __

  How to remove temporary files, waiting to be written to disk when the computer starts?

  Hi Reasman,

  Welcome to the Microsoft answers site!

  To clear pending files, select the files/folders in the 'Files to add to the CD/DVD' box and press DELETE. However, if you want to delete all files, click the CD/DVD drive and select 'Clear the staging area' from the context menu.

  You can manually delete the files that are stored in the following location:

  %USERPROFILE%\Local Settings\Application Data\Microsoft\CD Burning folder

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon.

  I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.

  Original title: Chameleon engine

  I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!

• I've upgraded to windows 7. Whenever the computer starts, a window pops up saying: windows Upgrade Advisor 7. I've searched for the file and can't find it. Any idesa someone?

  Cannot get rid of this window. Help

  • Click Start
  • Type: MSCONFIG.
  • Press enter on your keyboard
  • On the general tab, click Selective startup.
  • Under Selective startup, clear the check box load startup items.
  • Click the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  • Click OK.
  • When you are prompted, click on restart.
  • After the computer starts, check if the problem is resolved.

• The computer starts very noisy until Windows starts

  Starting the PC with new GPU Quadro - YouTube

  Watch the video. As the computer starts, it becomes very noisy. I thought it was the GPU as a first step, but it doesn't seem to matter which GPU is installed. This has happened for a while now because I have built this PC a few weeks ago. It was very quiet at first. Could not yet say that it was on. And now this terrible noise that I can't explain.

  I removed a GPU, then the other. I guess it's the motherboard or a fan making the noise - I can't imagine moving parts on the motherboard that could make that noise. Anyway, once Windows has fully booted most of the noise dies down with the exception of a little rattle noise. But not as quiet as it once was.

  I posted on forums of PNY and NVidia on this, but I don't expect much response because it is looking as if it was not GPU bound at all. I'll try ASUS then

  core i7 - 4930 K 6 3.4 GHz processor

  ASUS P9X79 - E WS motherboard

  64 GB of Corsair Dominator RAM

  ASUS Direct CU II OC / 3 GB GeForce GTX780

  PNY Quadro K4200

  Intel 530 OS SSD series engine

  Good news! It was one of the case fans. Interference with a cable or on the side of the cover. Of course, the less accessible fan, but I had

• Node Manager does not restart the WebLogic servers when the computer starts

  Hi all
  
  I'm testing the new WebLogic Server version as well as of new forms and reports. I don't have much experience with WebLogic (using the Internet Oracle 10g Application) bare with me for a moment.
  
  I'm using Node Manager to start admin server and all the other managed servers. I also installed nodes as a Windows service manager and configured the boot parameters to include Xrs-/-Xnohup, as stated in the documentation and everything seems to work fine until I restart the server. Node Manager service starts and according to his diary, he plays startup.properties of each server, but it does not start them. Am I missing something here? I found myself in an impression that Node Manager must restart the server in case of reboot system, if the server was running when the computer has been restarted.
  Even though I don't have much experience with WebLogic, I'm not a beginner. I managed to migrate (for testing only) all the business application (more than 1000 forms and reports) of iAS 10g to the new version in two days. Application works very well and I only have problems with servers to start when the computer starts using Node Manager.
  
  Test environment:
  Windows 2008 Standard 32-bit
  RAM: 2 GB
  HARD DRIVE: THE 140 GB
  CPU: 2xXeon

  # nodemanager.properties
  ...
  CrashRecoveryEnabled = true
  ...

• Pavilion dv7: no internet after resetting the computer

  I don't know if I am posting this in the right advice.  I had to do a reset on my Pavilion dv7 laptop, kept my personal files, but now I can't access the Internet.  It shows that I am connected to my wireless network, but I can't go to all the websites that I go into my browser.  I went to Device Manager and went to network adapters.  I can say that the driver works fine and I don't see the warnings or errors on other drivers in Device Manager.  I am at a loss of what to so any help would be appreciated.

  Hey @Esoxdiver,

  I understand that you are experiencing you encounter some difficulties to connect your laptop in WiFi and I want to help.

  Here is a list of steps that solve common problems with wireless connectivity.

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Network power cycle:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.
  
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an Ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
  
  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down menu in the upper right corner of the document.

  The above steps are presented by @Great-Christine-Tree

  I hope this helps. If so, please hit the Thumbs Up and accept as a Solution.

  See you soon,.

  TechSurge.

• When closing my one computer program "" ITIBITI /. ". EXE"appears on the screen prevents the computer shutdown.

  Original title: when closing my computer a program "" ITIBITI /. ". EXE"appears on the screen prevents the closing... the computer needed to force the point to close before I can close the computer

  I don't know how to describe it better but will try.

  When I select 'close the computer' page is in place ('close').  At the same time, a program called "' I T I B I T E X IE" appears on the screen. "

  Receive the note that says 'close', but she will close by have by clicking on "close".  I have to force it closed before I can close the computer.

  I hope it's understanable.

  Hey AvisTilly,

  Unless you have installed a program called ITIBITI, it would be a good idea to scan your computer for malware. Run a full scan using the Scanner below the link Microsoft to see if he can identify or remove malicious programs from your system.
  Microsoft safety scanner

  Hope that helps.