HP Pavilion p6000: resolution is not
I finished the putting up of my extended monitor, using a Philips TV and a Samsung monitor. The TV is supposed to be the 1366 x 768 p resolution, but the default computer is 1280 x 720. In addition, only two resolutions that appear are 1280 x 720 and 1920 x 1080. How can I get the correct resolution.
Furthermore, I use ATI Catalyst, not Intel.
Most recent spirit. I found the driver on the site.
Tags: HP Desktops
Similar Questions
-
HP Pavilion P6000 series (MN: p6710cs-m)
Hi guys
I have some problems with this desktop computer. This PC is 1.5 years. I bought an external graphics (GV-R725O5-2gi), but the new GC will not work. I ran the card on an old PC of 5 year with maybe end of 1 PCIe slot that it runs. I have suspected that the card is broken. Stock of 300W power supply, I changed to new 450W. Next step was instalation of the HW on the motherboard, then turn on the PC. This card has no external power supply. The fan on the card works. The PC does not beep ani signals but the screan is black and the PC is no W7 boot. I also have an old (Inno3d GF 7300GS) card for testing. I don't know what interface PCIe gen is the GF 7300 GS but the amd's PCIe Gen 3. The PC works and the start-up of W7 with the GF 7300 GS. I chcked the BIOS for Setup, but it is bad for the config. I turn off power save mode or something like that enable this opt: pic. My first idea was compatibility question maybe update BIOS version. But when the GF 7300 GS runs that the BIOS is not the problem I think. It is possible that I have to upgrade the BIOS? my version of the bios (2.10.1206) and the site of product extra have a new version (7.15 A Rev. 3.02 M). Slot PCIe on the PC is 16 X, but the card is only 8 X I have search for PCIe compatibility issues, but CESP 1 standard to the most recent must be compatible. In some cases the PCIe 1 may have some problems. You can put a 3 PCIe Card in a PCIe 2 motherboard and it wil run. Here is the motherboard spec. I think that this configuration should work but I don't know where is the problem. I don't know what to do. I also read a coment in this forum that the older generation of AMD cards worked well on HP Pavilion P6000 serias. Can you help me???
PEAK.
Thanks, Ervin
Based on specifications, your HP p6710cs is four years old and has a PCIe Gen 2.0 x 16 slot. The card you are trying to use is that GEN 3.0 PCIe may require a mother UEFI based that supports a certain level of specification. Please try to older pre-R7/R9 map as the HD 6000 / 7000 series.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
HP pavilion p6000: memory upgrade
Have a Pavilion p6000, SN MXX0490MHH, product # BT543AA #ABA. Provided 4 x 2 GB with 8 GB of ram installed on the chips. Operating system is Windows 8.1. Upgrade to 16 GB and bought 4 x 4 GB DDR3 1333 MHz, DIMM parts. Does not seem to accept the new memory. Question: Is this good memory, and this system will support 16 GB.
Hello
Explain what "is not except" means. Windows is not except the new memory or the BIOS does not recognize the memory or the PC does not start with the new memory?
We cannot answer your question, given the information you have posted. You can certainly search the forum for others who may or may not have success the upgrade of your particular PC model to 16 GB.
Try to clear the CMOS memory. If this does not solve the problem then test each one dimm at a time. Don't forget, with the former PC HP DIMMs need to be a game.
Try this memory bootable Diagnostics CD. Download memtest86 iso file and burn the disk using Imgburn.
Memtest86 4.20 more Installer USB. Test each dimm one at a time then as a complete set.
-
HP Pavilion x 2 does not appear on my tv
Hi people.
I recently bought a HP Pavilion X 2 2 in 1 laptop and you want to connect to my TV. The laptop has been upgraded to windows recentluy 8.1. When I connect using an HDMI cable, the TV recognizes that the HDMI is connected, but the laptop screen does not issue on the TV screen. When I hit f4 to toggle the display, it says ' your PC can't project to another screen. Try reinstalling the driver or using a different video card. »
When I go in Panel configuration, such as recommended on other requests, set the screen resolution does not have other options than the basic display PnP. It's as if my laptop does not detect my TV. It is not in my computer, devices or anything like that. If it helps, I did not attempt to connect it to my tv when it just got windows 8 on it.
Any help would be greatly received. Please make it simple however, I am not a technophile!
Thank you, Ben
Hello MrBLT
Welcome to the HP Forums!
I understand that you are having problems with the HDMI connection. My first suggestion would be to uninstall and reinstall the graphics driver from the computer. You can use the wizard helps to do this, and the following document explains how: download or update of software and drivers for HP computers
Please let me know what happens. Thank you!
Mario
-
Games running in lower resolution on the desktop resolution does not fill the screen
I have a laptop HP ENVY 17 TS with NVIDIA GT 740 M and Intel 4600HD graphics drivers and running Windows 7. Whenever I want to change the resolution in games at a lower resolution on the desktop resolution, the game shrinks to its view, leaving the couple of inches black bars on the edges. For example, if my the desktop resolution is 1920 x 1080 and I want to start a game in 1600 x 900, the game does not fill the screen, instead, it leaves an amount of empty space on the edges of the screen.
In order to solve this problem, I tried the following steps:
I first tried to locate the view tab in the NVIDIA Control Panel in order to define the scale/stretch in "Full screen", but my version of NVIDIA CP isn't the view tab (my NVIDIA drivers are the latest version).
Then I discovered that I should do this in the Intel HD Graphics Control Panel. My Intel HD Graphics CP has an option named "Calibration" under display > display settings and it doesn't show the option to retain display scaling that is checked by default and does not change. Also, after searching the Internet I saw that some people suggested entering the 'advanced settings' and try to make changes. When I try to enter advanced settings, under view, it says 'this screen does not support advanced settings'.
After trying without success, I tried the update driver Intel via their website, hoping that it can fix the problem. I ran the small Intel application on their Web site that identifies my chipset and offers me the latest driver for this chipset. Web site told me that the driver is installed on my computer is 10.18.10.3304, and there is an update for what is 15.33.18.64.3496 (or 10.18.10.3496). So I downloaded the file, but when I tried to run, it gave me this error message: "the drivre being installed is not validated for this computer. You can get the correct driver from the manufacturer of the computer. Setup will now exit. "that makes no sense.
After trying the above steps, I'm not able to solve the problem, and I need help from someone who really knows how to solve this problem.
Thank you.Solution (I hope)
1. choose the properties of the graphic (logo Intel) option when you right click on the desktop
2. go in view
3. go through the resolutions on the 'Resolution' and change to this resolution (do not click Apply)
4. for everyone to go to 'Scaling' at the bottom of the screen and change it to scale full screen (do not click Apply)
5. Repeat until you get back to the higher resolution (that won't let you change the scale).
6. quickly choose a few resolutions from the drop-down menu to make sure that they have changed their scale.
I had a problem with some resoultions changing the way they were, but which should solve most of the problems.
-
Pavilion p6000: upgrading Pavilion p6000
Hi, I just got the Pavilion p6000 on ebay for around $ 200 and I want to change the graphics card and possibly add more ram. So I would like to know if it is correct to what I intend to do.
There is some information about the computer that I know:
: HP Pavilion p6000 series
Product number: BT493AA #ABC
Motherboard: N-Alvorix-RS880-formfat (Alvorix)
RAM: 4096Mb non ecc
Processor: AMD Athlon (TM) II X 3 445 CPU (CPU 3), ~3.1GHz
Graphics card: ATI Radeon HD 4200 (1916 MB)
I would like to know if I could use a Nvidia GTX 980 graphics card and what is the maximum RAM (ram) the motherboard can support on a 64 bit system.
Thanks in advance.
Hello
You can search the forum "Alvorix" and see what has been already stated.
-
My HP Pavilion Entertainment PC will not communicate with my printer HP 309g. Suffice to say that they are connected to WIFI. I have tried wireless and connected.
GR
Since they are both HP products you the best solution is to talk to them...
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help -
my color resolution does not work can you tell me how to fix it?
Hi my color resolution does not work its blurry can you tell me how to fix it? Ty
Hello Andrea,
First, what operating system are you using?
Second, how many time that there a problem?
Was anything changed on your system before to happen began?
Finally, you have the latest updated drivers for your video card?
Eddie B.
-
HP Pavilion dv7t-3000 does not start
My HP Pavilion dv7t-3000 does not start. I checked this article: http://support.hp.com/us-en/document/c01732674
According to who, the error condition is: 'non-functional CPU.
So if I buy a new processor and disassemble the laptop and replace the processor, it will fix the problem?
Perhaps, but it is much more likely to be the motherboard. If the motherboard is bad, you can't trust the blink codes that it generates. Failures of the CPU but rarely occur. Motherboard failure happens all the time.
-
HP Pavilion G6-2302ax: drivers not available for 64 bit windows 7
HP Pavilion G6-2302ax drivers not available
1 chart
PCI\VEN_1002 & DEV_6840 & SUBSYS_184A103C & REV_00
PCI\VEN_1002 & DEV_6840 & SUBSYS_184A103C
PCI\VEN_1002 & DEV_6840 & CC_030000
PCI\VEN_1002 & DEV_6840 & CC_0300
2. Bluetooth controller
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3298 & CC_0D1100
PCI\VEN_1814 & DEV_3298 & CC_0D11
3. Ethernet controller
PCI\VEN_10EC & DEV_8136 & SUBSYS_184AEC103C & REV_05
PCI\VEN_10EC & DEV_8136 & SUBSYS_184AEC103C
PCI\VEN_10EC & DEV_8136 & CC_020000
PCI\VEN_10EC & DEV_8136 & CC_0200
4. network controller
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C
PCI\VEN_1814 & DEV_3290 & CC_028000
PCI\VEN_1814 & DEV_3290 & CC_0280
5. SM Bus controller
PCI\VEN_1022 & DEV_780B & SUBSYS_184A103C & REV_14
PCI\VEN_1022 & DEV_780B & SUBSYS_184A103C
PCI\VEN_1022 & DEV_780B & CC_0C0500
PCI\VEN_1022 & DEV_780B & CC_0C05
6 UNIVERSAL Serial Bus (USB) controller
PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C & REV_03
PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C
PCI\VEN_1022 & DEV_7812 & CC_0C0330
PCI\VEN_1022 & DEV_7812 & CC_0C03
7.
Bus controller series UNIVERSAL (USB)
PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C & REV_03
PCI\VEN_1022 & DEV_7812 & SUBSYS_184A103C
PCI\VEN_1022 & DEV_7812 & CC_0C0330
PCI\VEN_1022 & DEV_7812 & CC_0C03
Need to install these drivers for windows 7 64 bit
Hello:
First download and install the amd chipset drivers and restart.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Graphics card:
Audio:
Bluetooth controller:
Network controller:
Ethernet controller:
-
Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005
Original title: recovery problem
Hello
According to the HP Support Forums, this error may be to do with the hard or for other reasons.
You never have it replaced with a no HP bought in car?
Read these threads HP on your error code:
If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.
See you soon...
-
The sound on my HP Pavilion G6-1a19wm does not work
Hi the sound on my HP Pavilion G6-1a19wm does not work. His "only" works when you use the audio plug with external speakers. I tried to uninstall the driver, update the driver, microsoft fix - it and troubleshooting steps. audio device present in the Device Manager and supposedly working properly, mute is "not"on." visually everything audio related things suggest that the audio is fine and troubleshooting finds no problem... what else could it be?
Hello
Try the following.
Download IDT Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55036.exe
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you're done, shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. Once this done, do a right-click the speaker icon in the taskbar and select playback devices. Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click the Set Default button - check if you now audio.
Kind regards
DP - K
-
just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker?
just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker? or any HP monitor built in speaker?
Hello
The following link shows its specifications:
http://WWW8.HP.com/emea_africa/en/products/monitors/product-detail.html?OID=5328978#! tab features =
No speaker. Please try the following Nice monitor:
Kind regards.
-
The resolution does not change everytime I turn on my pc or restart?
The resolution does not change everytime I turn on my pc or restart?
The resolution does not change everytime I turn on my pc or restart?
-
Programmes of Application Applications App Apps games Legacy Crash crashes Hang Hangsgame gel game compatibility
game freeze
infected: double vaccine
In the game infected: vaccine of twin beds, a legend appears in the main menu saying current resolution does not meet the minimum daysx24hours for windowed mode. also, the game freezes when I get to the part where I am under the bridge after I talk with this guy without shelter. Anyone else have this problem with this game, if so is there anyway to address as well the game dose'nt freeze? Thank you
Hi Joseph,.
Welcome to the Microsoft Community and thanks for posting the question.
According to the description, it looks like you are facing a problem with the vaccine twin infected on Windows 7.
I would suggest you to check with the game manufacture if there is none specify available resolution system settings to play the double vaccine game.
Refer to the following Microsoft article if this can help.
Troubleshoot display with Microsoft games: http://support.microsoft.com/kb/263039
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
Maybe you are looking for
-
Safari using too much CPU!
Hi, if you are using safari, my use of CPU spikes upward. My mac starts to heat. Help would be appreciated.
-
Tecra S1 (PT831E) - cannot boot from the XP installation disk
Hi all I received this book, but it is secure.There is a BIOS password (which I have) and there is an administrator password which I don't have. With my user account, I can't install or change anything, so I want to erase the whole HARD drive and ins
-
I received a guest today that 7 updates are available - when I clicked update--the system came back with 646 - Windows update error cod encountered an unknown error - with NO instructions on what to do - I am confused.
-
Original title: eee pc ausa I have an eee pc with xp I want to format it, but im used to ms back how I do
-
I love the develop module, but I'm doing something wrong in the libraryIn the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos