HP Pavilion p6000 series: p6719c

Similar Questions

• HP Pavilion P6000 series (MN: p6710cs-m)

  Hi guys

  I have some problems with this desktop computer. This PC is 1.5 years. I bought an external graphics (GV-R725O5-2gi), but the new GC will not work. I ran the card on an old PC of 5 year with maybe end of 1 PCIe slot that it runs. I have suspected that the card is broken. Stock of 300W power supply, I changed to new 450W. Next step was instalation of the HW on the motherboard, then turn on the PC. This card has no external power supply. The fan on the card works. The PC does not beep ani signals but the screan is black and the PC is no W7 boot. I also have an old (Inno3d GF 7300GS) card for testing. I don't know what interface PCIe gen is the GF 7300 GS but the amd's PCIe Gen 3. The PC works and the start-up of W7 with the GF 7300 GS. I chcked the BIOS for Setup, but it is bad for the config. I turn off power save mode or something like that enable this opt: pic.  My first idea was compatibility question maybe update BIOS version. But when the GF 7300 GS runs that the BIOS is not the problem I think. It is possible that I have to upgrade the BIOS? my version of the bios (2.10.1206) and the site of product extra have a new version (7.15 A Rev. 3.02 M).  Slot PCIe on the PC is 16 X, but the card is only 8 X I have search for PCIe compatibility issues, but CESP 1 standard to the most recent must be compatible. In some cases the PCIe 1 may have some problems. You can put a 3 PCIe Card in a PCIe 2 motherboard and it wil run. Here is the motherboard spec. I think that this configuration should work but I don't know where is the problem. I don't know what to do.  I also read a coment in this forum that the older generation of AMD cards worked well on HP Pavilion P6000 serias. Can you help me???

  PEAK.

  

  Thanks, Ervin

  Based on specifications, your HP p6710cs is four years old and has a PCIe Gen 2.0 x 16 slot. The card you are trying to use is that GEN 3.0 PCIe may require a mother UEFI based that supports a certain level of specification. Please try to older pre-R7/R9 map as the HD 6000 / 7000 series.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Upgrade HP Pavilion P6000 series

  Hello, I think the upgrade of processor for play in the settings 'Ultra' for various games such as Diablo 3, World of Warcraft and Guild Wars 2 and graphics card in my computer. I'll list the product name and number, the map graphics, processor, motherboard and monitor type. Any additional necessary information please ask. I'm looking to upgrade the processor and graphics compatible with my motherboard.

  Windows 7

  The product name and number:

  HP Pavilion series P6000

  BV532AAR #ABA

  Current motherboard:

  FOXCONN 2AB1

  Card adapter/graphic of the current view:

  ATI Radeon HD 4200

  Current processor:

  AMD Phenom II X 4 840 T with 2.90 GHz, 64-bit, four hearts

  Monitor:

  ViewSonic VX2739 series at 1920 x 1080 p

  Hello

  Consult thispublication of documentfor general information on the selection of a video card.

  I would not recommend an upgrade of the processor until you install a new video card.  Upgrading the CPU may be an unnecessary expense.

  The P6000 PC has only a power supply 250 watt so that will have to be replaced.  I would look at the Corsair CX600 because it has the power and the appropriate physical dimensions.

  Ultra settings can be a little complicated depending on the game.  I use the NVIDIA GTX 460 with some modern games (COD, BF3 and HAWX 2) with parameters utra without problems.  Right now, I recommend the Sapphire HD 6870.  The 6870 is better than the 460, so you shouldn't have any problems.

  ' HP ' how-to ' articles should be useful.

• HP pavilion p6000 series model p6805w windows7

  PC won't start not closed down my hp Pavilion series 6ooo & the pc recover not. the lower left corner of the motherboard has a flashing green light, I also think that the battery poped when I tried to restart

  Cluney,

  The HP p6805w is a desktop unit.  What is the status of the power supply? Please see here step 2 as the computer does not illuminate.

• Pavilion p6000 series p6633w: power supply upgrade

  Is the format of p6633w and atx pavilion for the power supply compatible, I couldn't find a HP 400w PSU.  They offer a?  The power supply I found is in atx format.

  Thank you for the additional information.

  The power supply unit (PSU) is a standard ATX.  You can use any brand.  As a precaution, I suggest to measure the PSU existing and comparing measures to whichever you choose.  I love Corsair products.  In addition, a modular power supply is good for cases of average size.  You can only use the cables needed to allow better air circulation in the case.  I recommend at least 500W.  This will allow more power over the maximum use.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Omstart av HP pavilion p6000 series

  JAG behover hur man starta om PC som den var NY nar tips. Har en en 'Reperationsskiva Windows 7' backupp skivar. Finns in wireless start-up/sdi-thread = 3096 KB + wire-WIM-start = Ko 365341.

  Gor Hur man?

  debt 42

  dette42 wrote:
  

  Hej.

  AR ATT forsoka fabriksaterstallning till datorn SKICK SOM Ficks even Nars.  D: / "Recovery" Jag kommer in i den ej Finns. AR fabriksaterstalle of man here?

  Is to try to factory reset the Samma state that when you computer Fick. D: / "Recovery", I'm not in it. AR here this new man factory place?

  For att utfora in fabriksaterstallning Maste upprepade Ganger trycka pa tangents F11 vid uppstart av datorn att det kommer your dig until Recovery Manager, Saitek bara instruktionerna for att datorn aterstalla. The har nar fick datorn om behovs sa aterstallningsskivor?

  To perform a factory restore you repeatedly click the F11 key when the computer starts, it will bring you to the Recovery Manager, simply follow the instructions to restore your computer.

  You did it recovery disks when you got the computer if need be?

• Pavilion p6000 series p6633w: processor hp upgrade p6633w

  I want to upgrade my cpu (processor) to a tri-core or quad-core, I found the list under proiduct specs for compatible socket AM3 processors.  My BIOS will support the processor upgrade?  BIOS version 6.02, date 21/07/10 by American Megatrends, Inc..

  Gordon, welcome to the forum.

  Here are the processors that have been fully tested to ensure they will work with the motherboard:

  • Max TDP: 95W

• Need new processor for Hp Pavilion p6000 series

  Hey everyone I broke one of the most important commandments of the computer world.
  "You won't be bending your pins of the processor.
  
  Well Yes, I bent and broken irreparably pins at the bottom of my CPU and now I need a new. I cannot know what is and is not compatible with my motherboard however. For the most part cause I can't find out what motherboard I have. Any help would be greatly apprciated

  The link is here. Max is 125W TDP and 'NO' Black Edition CPU.

• Pavilion p6000 series p6633w: upgrade of the power supply

  It also seems that the fan is on top of the PSU, so when installing, I need to done deal inside the Tower fan?

  It can be installed in any event.  However, the most common way is confronted in the case.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion P6000 series: Advice on upgrades, if any?

  I have the desktop p6740f with AMD Phenom II 955 Quad processor, 8 GB DDR3, 1.5 TB hard drive memory. There the motherboard N-Alvorix-RS880-formfat (Alvorix). ATI Radeon HD 4200 graphics. IM an avid player and unfortunetly my gaming PC went into a deep sleep, never to recover. It was my daily life anyone can use computer. Now its my only source. My question is, are there things I can do to upgrade this thing to run say, WoW smoothly? Or do I just start from scratch with a completely new system. Do not forget that I am not not looking for a machine mega as if I had. I just want to be able to play without lag even issues with the graphics set on low.

  @lasvegaswireman already told you a new power supply with a GPU card decent.

  As you WIN 7, the BIOS rev max is 7.16 (related to the operating system).  I did a quick support on the HD 4850. It is out of stock. This means that the MSI GTX 750Ti is an excellent choice because it has a legacy and UEFI micro-switch.  You need the legacy support.  MSI GTX 750Ti Newegg shows a 400W PSU.  NewEgg has these two elements.

  Corsair 430W MSI GTX 750Ti   

• Pavilion p6000 series p6633w: video card

  I know that my system has a pci 2.0 x 16 slot, is the 3.0 pci card work?  Sapphire Radeon R7 240 2 GB DDR3 HDMI/DVI-D/VGA with Boost PCI-Express-11216-00 - 20G graphics card

  Video PCI Express 3.0 x 16 cards retro-compatible with PCI Express 2.0.  However, I am not sure the card you want to buy will work on your computer if it requires UEFI in the isntead of a (standard) the legacy BIOS motherboard.  HP didn't start using UEFI until mid_October 2012.  I believe that you have already updated the PSU power SUPPLY or intend to update.  I suggest that you contact Sapphire Support in order to ensure that it will work.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion p6000 series: Microsoft word open used

  I'm not able to open microsoft word. Whenever I try to open it, it says: "starting Microsoft word 2010 can not be opened. Try again or repair the product in the control panel. »

  Please help I need quick fix.

  Hello:

  Try reinstalling Office Starter 2010 using the file I compressed upwards and attached below (under the attachments).

  Download, unzip, and double-click on the file to run it.

  You must be connected to the internet so that the Setup file to communicate with the Microsoft Office Starter 2010 download site.

• Pavilion p6000: upgrading Pavilion p6000

  Hi, I just got the Pavilion p6000 on ebay for around $ 200 and I want to change the graphics card and possibly add more ram. So I would like to know if it is correct to what I intend to do.

  There is some information about the computer that I know:

  : HP Pavilion p6000 series

  Product number: BT493AA #ABC

  Motherboard: N-Alvorix-RS880-formfat (Alvorix)

  RAM: 4096Mb non ecc

  Processor: AMD Athlon (TM) II X 3 445 CPU (CPU 3), ~3.1GHz

  Graphics card: ATI Radeon HD 4200 (1916 MB)

  I would like to know if I could use a Nvidia GTX 980 graphics card and what is the maximum RAM (ram) the motherboard can support on a 64 bit system.

  Thanks in advance.

  Hello

  You can search the forum "Alvorix" and see what has been already stated.

• Adding a hard drive to a Pavilion 6000 series computer

  My Pavilion p6210f computer blew a motherboard and I could not find a replacement card, so I bought refurbished HP computer. It seems the same, but the model number is simply: P6000 series. I want to spend the p6210f hard drive into the slot of extension on the refurbished machine. Until I opened the box, everyone sees a problem with this plan?

  I am running Windows 7, so what matters.

  Linda820 wrote: my Pavilion p6210f computer blew a motherboard and I could not find a replacement card, so I bought refurbished HP computer. It seems the same, but the model number is simply: P6000 series. I want to spend the p6210f hard drive into the slot of extension on the refurbished machine. Until I opened the box, everyone sees a problem with this plan? I am running Windows 7, so what matters.

  Hello Linda820, here is the link for information on how to remove the hard drive from the Pavilion p6210f.

  Look at the bottom of the page for instructions on hard drive. It is a fairly simple process.

  The only real "shove" the process is the system of lock at the bottom of the hard drive cage. You can see in the photo instructions.

  Since you know exactly on the other HP model, it should be the same procedure to install the disk hard of the faulty system to the recently acquired system, or close to the same.

  You must cable Sata of the old system, given that the other system probably does not have one, and you need to connect to the right of the current hard drve Sata port port.

• How to enable bluetooth in my HP Pavilion g6 series Notebook?

  I have HP Pavilion g6 series Notebook and am trying to pair it with a bluetooth device.

  I can connect to the device via my iPhone well.

  Problem is that I don't know if my laptop supports bluetooth,

  and if so how to activate it.

  I went to control Panel\Hardware and the Sound\Devices and printers and tried to add a device - not good.

  I tried to search it upward in networks - not good.

  would appreciate your help!

  Bluetooth is not usually found in laptops the lower price point.