HP pavilion p6110y

Similar Questions

• The HP Pavilion p6110y Desktop PC OpenGl 3.0 is compatible?

  I recently downloaded a game on Steam (Kings mercenary) because according to this site (link below), he said that I was able to run it.

  http://www.systemrequirementslab.com/CYRI

  However, when I went to play the game, it is said - and I quote - "your video card's OpenGL is does not support the extension GL_ARB_framebuffer_object.» Please update your driver or contact your provider for loans OpenGL 3.0 drivers. »

  If my PC is have OpenGL 3.0 drivers available for download, or will I just lose $15 on a game that I will not be able to play?

  My PC model is the HP Pavilion p6110y desktop PC

  Hello

  Based on the following link, your machine has ONLY "Intel GMA 3100":

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01742156 & lang = to & CC = US & TaskID = 101 & ContentType = SupportFAQ & prodSeriesId = 3942799

  And according to the following document, the card only supports 2.0:

  http://download.Intel.com/products/graphics/intel_graphics_guide.PDF

  Your machine has a slot for a video card, you can add a new card with a correctly PSU, so you won't lose $ 15.

  Kind regards.

• Pavilion p6110y: what would be a viable replacement for the Pavilion p6110y power?

  Hello!  I need to replace the power supply of my Pavilion p6110y PC.  It has a 20 motherboard connector pins and the power supplies I saw on Amazon use now 24 pins for the motherboard connectors.  When I tried to see if I could use a connector 24 pin 20 pins, the instructions I found on a motherboard said that they could not be used with HP because it had different sons.  So, I need to find a diet that I can use.  Any help you can give will be greatly appreciated.

  Thank you

  Barb

  Hello Barb,

  The original card mother card in your PC has a power supply ATX 24-pin. Review this image and information of the motherboardHP.

  

  The Corsair CX500, or CX600 be excellent power of food choice.

  Review this HP has published a how-to on replacing the power supply section.

• Graphics card for HP Pavilion p6110y desktop PC

  I recently installed Photoshop on my HP Pavilion p6110y desktop PC and I get the following 2 error messages:

  Photoshop has encountered a problem with the display driver and has temporarily disabled the improvements using graphics hardware.  See the Web site of the manufacturer for the latest version of the software.

  and...

  The 3D features require a minimum of 512 MB of vRAM. Photoshop has detected less than on your system.  Update your graphics card driver may solve the problem.

  To check, I discovered that the computer has the Intel (R) with total GMA3100 available memory 256 MB, so I presume that is the problem.  My question is what graphics card is compatible with this system, and I should also adapt the food if I understand that may be required when changing the graphics cards?

  Dave

  Dave, welcome to the forum.

  Yes, you are right that the video memory is not enough.  I suggest to upgrade the power supply unit (PSU) at least 500W.  This will allow a better video card and future updates.  I like Corsair and OCZ PSU.

  Now for the video card.  I like XFX cards.  Here is a card that should work:

  http://www.Newegg.com/product/product.aspx?item=N82E16814150642

  If you decide on his card you would probably at least 600W.

  If your problem is solved, please click "accept as a Solution.

• HP Pavilion p6110y: p6110y specifications

  I love my flag and do not want to get another, but I would also like to enjoy the speed of USB 3.0, so I would like to know if I can buy a USB 3.0 card and install it in my hp p6110y computer!  And it works!

  Given that this motherboard has 2 PCI x 1 slots, it would probably be able to accept theUSB CARD as long as there is an open slot.

• HP Pavilion p6110y desktop PC: drivers

  My computer is 9 years old.  From time to time I get messages from companies telling me that my drivers are up to date.  Someone told me to go to HP (this is the computer I have) and ask them to download the drivers I am missing or obsolete.  I tried to contact you, but I was told that my warranty has expired.   I do not understand what the drivers are and don't know what to do about them.  Is there a company that I can go to get drivers and how do I know what than I need?  Can I go into a computer store (I bought my computer from Best Buy) and ask them to tell me what drivers I need and sell to me?  What can I do in this situation?

  Your unit of 9 year, delivered with Windows Vista operating system. How do you WIN 10 is curious, but I regress.  There is no need to worry, because there is that NO updates past don't WIN 7 for this unit. ignore offers of these sites.  Although the one year warranty has expired, you need not worry.  Enjoy this computer almost ten years.

• power electric wiring is smaller, there are empty shells left

  HP pavilion p6110y - new wiring and old pc power supply is smaller, there are left empty plugs first I took old food out but did not to see which end had extra Sockets have new power provide in and ready to plug but don't want to trial and error and close up in smoke thx for all help

  tgo2go,

  The card mother p6110y stock must have a 24pin connector. The 250W power SUPPLY Bestec had that a connector 20 pins, according to specifications listed here. I can understand Frank question you. Your comment is very confused.

  Please confirm:

  1) the 24 pin motherboard.

  (2) original power supply was 20 pins.

  (3) new power supply's 24pin.

  Check this page for the connectors. You will notice the capture of latch and the card mother PSU. This locking.

  Does make sense for you? The clasp and are on the other side.

  

  You can plug a power supply ATX 20 pin in a motherboard with a Connector ATX 24. The image above shows the power cable plugged into a motherboard 24 20-pin pins. A power cable 20 pin compatible only with at one end of a connector to motherboard 24 pins so you cannot insert it incorrectly.

• HP Upgrade Wizard does not

  I'm moving to win7 from vista home premium 64-bit, after having inserted the hp in my dvd player upgrade wizard, nothing happens.do I need this before you insert the disk to upgrade multimedia hp windows 7 premium? I did the preliminary work to save and create the recovery disks, uninstall incompatible programs, update files, hp and windows vista. can I use the win7 upgrade disk before using the upgrade wizard hp drive?  anyone has any ideas as to why the disc does not work?  Thank you for any response. HP Pavilion p6110y win vista home premium (x 64)

  Message edited by Wendy on 11/18/2009 07:17

  Windows is no longer autoplays CD/DVD because of the possibility of malware that infected the autorun / autoplay executable. Manually go to the DVD drive and run the Setup program and follow the upgrade produres mentioned earlier.

• screen problem, black 2009 m after the login screen

  Since I downloaded the updated HP I noticed my monitor freezes for like a minute after the Windows 7 log on screen. The log on screen is visible, but after that it fades to the transition to the desktop, the screen stays black for a minute and the only thing visible is the pointer. Office windows load after that and is visible, working properly, etc, but since the update, it takes more time to load. I checked the monitor, the monitor display settings and driver windows display settings - everything seems to go well. I can't find a solution to this annoying problem.

  My pc is a HP Pavilion p6110y, running Windows 7 64 - bit (upgrade from Vista), Pentium Dual Core CPU E5300 @ 2.60 GHz, 6 GB Ram, 500 GB HD

  The monitor is an HP 2009 m.

  Any help would be great!

  You can try to use msconfig to prevent some programs from starting automatically.  It can be a process or service that is causing the delay.

  Here is a document describing the msconfig (it is for Vista, but the program is the same in Windows 7): http://support.hp.com/us-en/document/c00819747

  The first thing I would try is start diagnosis, reboot and see if the delay is gone.  If it is, then reload msconfig and go through the startup items tab uncheck a few at a time and restart to see what elements cause the delay.  This, until you have reduced the offending program.

  If start diagnosis does not remove the delay, then it might be something else in the system of the cause.

• iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone, which has the latest operating system running

  iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone running. I downloaded the latest OS for the phone and the latest version of iTunes on my PC and have tried all USB ports several times. I also reinstalled drivers USB to the PC.  The phone is recognized on the computer of a friend under Win 7. All shows when I plug it on mine is a page showing the 'Apple iPhone' folder display of storage internal (2.18 GB free of 14.7 GB). Troubleshooting in devices and printers, where the phone displays as "Not specified Apple iPhone" generates a message saying that "Apple iPhone is an older USB device and may not work with USB 3.0 and plug it into a USB 2.0 port." But when I use USB 2.0 (I tried several times using each of the three USB ports on my PC), troubleshooting the error message says "Apple iPhone won't work correctly with USB 3.0." This seems to be a recent problem, since in March 2016, I could spend a few songs from my PC to my phone using iTunes.

  I wish I had some ideas of people who have experienced this problem, I find to be a more frustrating one.

  Well, you aren't the only one. This just freakin happened to me. I spent the last three hours with apple and Windows supports. Now I'm reinstalling Windows 10 by last resort of Windows support councils. I got the same message USB. In iTunes, under devices something removed my 5s and the iPad. But it remains 6 s wife. I tried my computers 2-(SS) 3.0 ports and 1 port 2.0 ordinary. I tried all four thinners cables I have. I will let you know the result of the Windows reinstall.

• Pavilion dv7 6163 cl: unlock (reset) password on BIOS/CMOS for HP DV7 - 6163cl

  The bios of my notebook (Pavilion dv7 6163 cl) blocked by password, and I never put a password. Could you help me solve?

  Enter the wrong password 3 times or simply leave them blank and press success enter 3 times. You should get a stop code. This zip code here.

  https://BIOS-PW.org/

• Pavilion 15: Bios password

  I have a Pavilion 15-e022sa which I just can't get into the bios as it says I need a password that I never put someone could please help

  Hello

  Enter 60081217

  Kind regards

  DP - K

• HP Pavilion dv7: unable to connect to the Internet

  I can't access the Internet via ethernet or wireless. It seemed to happen after an update of Windows 10.

  Other computer and android phone can access the wireless. When I click on the wireless icon, I see different networks, including mine. However, it is said, "No Internet, secure." I ran a diagnosis, saying that the wireless network adapter and the wired network adapter does not work. I tried to update the drivers, but to no avail.

  I remove this update. I have HP Pavilion dv7, produces none. QJ799AV #ABA. It seems that there are no drivers for Windows 10.

  Here in an Exchange I had with HP Support on Facebook:

  Resolv_S wrote:
  

  Hi@ekdman,

  Thanks for stopping by the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Help with the purchase of a recovery media. Is this fair?

  Thanks for sharing the question. I want to help you.

  I understand the disadvantages that you went through to find the solution for the issue.

  I would like to share a link to order you a recovery HP online support. Please use the link below to order the media.

  http://HP.care/2dMsChn

  I hope this helps. Please update the State of the question,

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

  Thanks for the reply.  However, I took the chance to do a reset on my computer.  And now I have access to the internet.

• Pavilion dv8: problem with Pavilion dv8 (treble/bass control) Windows 10

  I had my Pavilion dv8 for awhile.  I started having problems with the slider treble/bass control. He would sporadically pop-up and begin to change the treble or bass at irregular intervals. He also unplug randomly my wireless connection. I tried to solve the problem by downloading a driver, but the problem remains. At first, it was just a little annoying, fixed by clicking the mouse or pressing the upper button of the internet, but now it of REALLY boring, popping up even as I write this post. But there is no driver for Windows 10. Someone at - it solutions?

  Thank you for your help

  Merah

  Hi @Merah

  Welcome to the HP Forums.

  I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.
  
  If I understand correctly you are facing problem control treble/bass in your laptop.

  I would like to know the number of full model of your laptop so that I can better help you with this problem.

  Thank you.

• HP Pavilion - 15-ab045sa: a few gestures of precision Touchpad not working not

  Hello

  I'm new to the forum, so I hope I posted in the right place.

  My product: HP Pavilion Notebook - 15-ab045sa (ENERGY STAR)

  I have all the gestures of touchpad usual work (three stroke of finger etc).  However, the recent to THE introduced a new gesture to switch virtual desktops. I was really looking forward to this update, but this gesture does not work! I tried to reinstall the update with erase everything and it still does not work!

  I don't understand why it does not work as I have a touchpad of accuracy and all other gestures of work except this new! Also even if some gestures of work (for example three finger swipe), I don't think that win 10 recognizes the touchpad of precision like under settings of the mouse and Trackpad, what it does not say that I have a touchpad of precision and so does me no options to change what are the gestures, as it should.

  I have the Synaptics TouchPad of SMBus 19.2.11.38 driver (21/07/2016).

  Would really appreciate your help as I was really looking forward to the new gesture switch virtual desktops.

  Thank you.

  Just got an update via windows update Synaptics update to version 19.3.11.37 - it finally allowed me to have the film 4 finger to switch virtual desktops!