HP Pavilion p6210pt desktop PC: after the installation of the new module of RAM PC does not start and continues to beep.
Hello
I am trying to upgrade the RAM on my PC. I don't know I got the correct specifications: 240 pin DDR3 PC3 - 10600 1333 MHz
And it comes to envy, I bought, Kingston.
The PC has 6 GB of RAM and a free slot, after I insert the new module on the free location corretly and press power, the PC does not start. It starts just a beep and the screen remains black.
Don't know how better to explain this.
If I take the new RAM all works normally. If I take old modules and just start by the new, the same thing happens, computer won't start not and just keeps to the beep. One of the Tweets is longer than the other, and then it repeats.
Can anyone help please, it's just the motherboard it is too old or something?
Thank you.
See you soon.
JO
Hello
Given that your PC works with the old DIMM modules and not the new dimm then you should contact Kingston for a cure.
Tags: HP Desktops
Similar Questions
-
After the reinstallation of Windows 7, it does not load and restarts continuously
I recently formatted and reinstalled Windows 7 on my Sony Vaio PCG - 71913L LAPTOP however the operating system does not load and his bicycle at all times. From the time turned the first page initialization comes then it stops and restarts and continues to go through this cycle. Is there a soloution to this question
Check your BIOS settings. Have you installed the drivers of Sony devices?
Test your hard drive and memory.
First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no error then your RAM is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test:
If you do not know your readers of the brand and model, try "Speccy",.
It provides information from the computer/system in detail:
OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - create a Bootable CD:
Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRDFor Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticSony product support: http://esupport.sony.com/US/perl/contact-land.pl?mdltype_id=1, 72,70,24,66,9,26,5
Sony device drivers: http://eSupport.Sony.com/en/VAIO
Enter your model number or leave Sony scan and detect your model.
If you have Windows 7 drivers then download to a folder on your hard drive and install all of them, starting with the mother/chipset, SATA, Firewire card drivers (1394), LAN, Audio, etc, and so on.
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problemsUpdated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyFor help to install windows 7 on your VAIO, you can contact the support team Vaio 1-888-476-6972 they will be more than happy to try to help.
J W Stuart: http://www.pagestart.com
-
Satellite A80 121 does not start and make a beep after every 15 seconds
Hello
I have a Toshiba Satellite A80-121, and it won't work. Yesterday, worked all very well, but now it does not start.
When I press the button the button normally has a blue color, then the screen stays black, no image at all, then the fan stops. Then I got a beep every 15 seconds.Can someone help me what is wrong?
Thank you very much for your help
Hello!
It sounds like a hardware malfunction...
If you have installed two RAM sticks try it with a single. Check it!I m not a technician to laptop but the problem may be with the motherboard, RAM or CPU, but this is my personal opinion.
Good bye
-
After the upgrade to vista SP2, windows does not start.
I have download and install vista SP2, everything goes well with the installation, no error, it ends without a problem, then it restarts my computer and after reboot, it comes up saying that windows didn't start (or your computer might not start)
I have 2 choices, start windows normally, that does nothing when I pick it up, the other option is to fix the problem, when I choose that it restore my computer to until I installed SP2, ive tried 3 times now with no luck.
also on a note related, when I try and open internet explorer 7, it crashes, it is said that she is looking for a fix for the problem and suggests so I run windows update, which is what suggested I download SP2.
any help anyone can give would be most appreciated.
Open a case of Vista SP2 support free of charge. (Don't worry IE8 at the moment.) ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
After the updates of Windows 7 computer does not start
I received a notice from the system Windows 7 updates have been downloaded and available for installation. I selected the installation of updates. After the updates when installed I was in charge to restart. The computer will not start at the top. It tries but stops at a blue screen with a cursor. I tried to boot into "safe mode" and get the same. I booted from my original Windows 7 disc and I went back to my restore point before the update. It appeared to restore successfully but I still get a blue screen.
What is my next course of action? I certainly DON'T want to format the drive and start again.The only thing I can say is that I know that you will not like to hear.
It is to re - install Windows 7 (do not enter the product key and uncheck the 'Activation').
Then immediately turn off automatic updates.
Then, go to the Microsoft Update site and only install one update at a time (make a note of the number KBXXXXXX), restart and check that you do not get the blue screen. Then download the next update and repeat the process until you either find to have installed the offending update or updates without any problem. If all goes well and the problem did not repeat, then you can activate Windows.
If you find yourself always with the blue screen after a given Update call Microsoft and tell them. If they won't listen, then create a new post on this forum, making reference to the question of the blue screen AND the number associated with the update. Also post the number here if I can do some research on the problem.
JS
http://www.PAGESTART.com
Never be afraid to ask. This forum has some of the best people in the world to help. -
I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death. with the details of error like:
Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.
I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode. I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.
Help!
Thank you.
So yes actually hear nothing helped me. Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD. Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive. After doing this, I was able to do a boot repair, who led for the BSOD. Not sure how that actually fixed, lost about 10 hours of my day. So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.
I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.
Problem is solved, had to go back to a previous version of good boot where I have not install updates again. Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.
Nice day.
Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:
-
I made a safe mode and removed the Trojan horse, I don't know how this forum works, so I won't be a gene, sorry.
Is this the same computer as in this thread more early of yours? -Online http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/how-can-i-change-the-black-color-at-the-top-of/820b0374-5652-e011-8dfc-68b599b31bf5
-
Runnng Windows 7 Firefox anf 6. Updated to 9.0. Error message says try to reinstall to fix the problem. Have tried without success. Uninstalled all the programs Firefox and installed a cleaning with the same error message that appears when I tried to start.
I had finally fixed it by uninstalling firefox and closing of my alarm box antivirus program, and then do a clean install.
-
Has anyone have the same problem and maybe a Solution?
Hey mksuperplus,
Please check this link Windows 10 update breaks Microsoft Adobe CC - missing - MSVCR110.dll community for the solution.
Kind regards
Nicos
-
I have the same problem as this post 2013! Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.
I installed a new power supply (Seasonic 620W), which works well. I also installed a GTX 660Ti last year and it was works fine as well. I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.
My BIOS date is 2011.
Where can I find an update for this?
I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use. Should I do back up to 7 or 8? and then update the BIOS? Y at - it a update for my BIOS and where can I find.
In any case, I hope that this is a solution. Again, this is not a bad machine to be 5 years old.
Thanks for any help!
If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.
It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.
I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS. I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards. I would return to the map. Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.
ZOTAC (they don't say anything about their product vBIOS)
https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core
Sapphire Technology
http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng
Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng
-
30 days after the program Window 7 6 Lightroom does not, open a popup that says error 16. What should I do?
Try reinstalling AAM.
https://www.Adobe.com/support/downloads/detail.jsp?ftpID=4773
-
After the update (December 2015), Camera Raw does not on the save new Camera Raw default. It keeps coming back to the default settings. Does anyone else have this problem?
Yes, this is the same bug.
The engineering team working on it.
We have no fixed timeline.
In the meantime, you can restore the previous update.
-
The FireFox 42.0.1 application does not start.
The FireFox 42.0.1 application does not start. I can uninstall and reload FireFox 37.0.2 and that worked, but now when I load 37.0.1 it installs really 42.0.1 that no longer works.
I had to use IE 10 to contact Mozilla.
Year annual should be ashamed of this...
Can you tell me why Mozilla FireFox 42.0.1 installs but won't work?
In addition, why FireFox 42.0.1 install when I try to install 37.0.2?It is possible that your firewall or other security software blocks or limit Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.
See:
-
Messenger does not update and continues to fall. Have tried different things according to research on the web without success. Deleted Outlook connector, nothing helps. Any ideas? OS is XP SP3. Very frustrated!
The message "network error has occurred. trying to read the file"C:\windows\installer\messenger.msi"
Have removed Outlook connector, nothing helps. Ran "msicuu2.exe" nothing helps. Off Zone Alarm - No difference.
All other programs except the AntiVirus closed during installation. Would appreciate any help please.
Hi a_wiseowl,It has a similar post here as well. Check if the advice given in the post will help you.If it does not help, post your query in Windows Live Messenger Forums for assistance on this issue.Kind regards
Divya R - Microsoft technical support.
-
my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.
Try to restart your machine and pressing F8 before the spash screen Windows appears. Choose the option "last last known good configuration".
If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.
Maybe you are looking for
-
The sensor validity finger print reader and windows 7
I recently installed windows 7 Enterprise 64-bit on my dv4t-1300cto. Everything is great except for the fingerprint reader is not working. It appears in the device as manager being installed correctly, but windows and digital persona say its not conn
-
How to set the Date and time on my HP Officejet Pro 8600 Plus?
I have a HP OfficeJet Pro 8600 Plus, and I would like to know, how can I implement the time stamp that is under my printer display screen continually Jan 00 00 00:00 a. Thank you
-
What can I do to make my Satellite L750 run faster?
Hello! First I should mention that I have no expertise on computers so I can look like a fool! I have a Satellite L750/L755 (8 GB of ram, I - 3) that runs very slowly (100% CPU when I do anything!) and it seems to be useless when it comes to playing
-
Static and sounds by clicking on p209tx
It's a week since I got this machine and I started experencing static sound in my headphones and external speakers, sometimes the problem is resolved automatically by itself and after restarting your PC, it comes back. I've tried disableing beats, bu
-
Logitech usb headset not automatically activated when it is plugged
On my old XP computer, whenever I plugged my Logitech USB headset, they are automatically detected and enabled, the its path from the speakers to the headphones when the pc has detected the and back to speakers when headphones unplugged, without me h