HP Pavilion p6210y: Office flashing after upgrade Windows 10

Similar Questions

• HP Pavilion does not start after upgrading Windows 10

  (Sorry for my bad English)
  Last night I started to update my HP Pavilion Windows 8.1 to 10, but I have a problem, because today, in the morning, the update was 99%, and it ended, just after I have shut down the computer and is going to school and when I got home, I turned on my HP and the problem was that the HP logo appeared and he began to load , but he didn't only show anything else than that, so I thought I'd let load after 3 hours, it was still loading and it was reseting every 5 minutes and now I just can't not try windows 10. Help?

  Hi there @lmao1,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that once you tried to upgrade to Windows 10, now stuck on the HP Logo at startup.

  If the computer hangs at the HP logo screen, try to clean the vents from the computer to the air and then restarting the laptop.

  Please note , remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Have you tried a hard reset?

  Have you tried to Test for hardware failures?

  Are - that you receive error messages or error codes?

  You happen to see a blue "option ' screen at all? '"

  Follow these steps to remove and reinsert the memory modules for troubleshooting:

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!

• I have a white screen after upgrade windows 8.1 on HP Pavilion 15-e092se

  I have the blank screen, mouse pointer only works after upgrade windows windows on HP Pavilion 15-e092se 8.1.

  Any help please.

  Yes you are right

  I had installed version of bad for graphics drivers intel so I opend laptop in safe mode and then deleted bad drivers after that I restarted the laptop, then it opened again, once disappeared from the blank screen I installed the latest version of the graphics drivers intel BIOS driver from following link:

  h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5394554#n402

  or you can download graphics drivers intel Web site to intel.

  Thank you

• 4340 proBook s: 4340 Probook s camara doesn't work anymore after upgrading WINDOWS 10

  Internal to the device doesn't work anymore after upgrading WINDOWS 10.

  All the drivers are up to date.

  I also downloaded the HP device drivers, but they offer several types.  I don't know what device to install.

  Also, I don't know what I can do.

  If someone can help me...?

  Thank you.

  The problem is resolved.

  Not in the way I wanted to (using the internal camera), but I bought an external camera.

  It works without any problem.

  So for me the problem is resolved.

  Thank you for given applications.

• LR cc developmodule do not work after upgrade Windows 10

  after upgrade Windows 10 development screen freezes and I have to restart LR

  I love a piece all about the problem on the adobe Web site. I have a graphic processor of AMD radeon HD 7500 series and manually turn off the processor resolved the LR crashes.

  Thanks for the reactions

• How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  Hello

  You can download the Photoshop CS 6 from the below mentioned link.

  Download Creative Suite 6 applications

  Thank you

• do not start cc2015 after upgrading Windows 10

  Do not start CC2015 after upgrading Windows 10!

  What can I do?

  A time CC2015 open and that thr program stop and closed.

  Can I read a text at the present time it is not possible.

  What can I do?

  Best regards

  Sandte

  Hi Brucgovn, thanks for the answer! Just sorted and came here to update the post.

  My method is similar, I just do the following:

  1. Go to C:\Program Files (x 86) \Adobe\Adobe Creative Cloud\CoreSyncExtension (this was the only file on the left, all others had been removed from the CreativeCloudCleaner use of the Adobe Creative Cloud cleaning tool to solve installation problems running
  2. I came across the problem trying to remove, so used Unlocker (Download Unlocker 1.9.2 - FileHippo.com) to unlock. Then deleted. It's explorer.exe using the process, which I think caused questions... the process is using the file
  3. Reinstalled and everything seems to work.

• First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  It was working fine until I updated my operating system. I tried to reinstall the software. I tried to update my graphic drivers.

  Hi P.Ava,

  Please also try to delete / disable any antivirus or firewall software installed on the system.

  Please update if it works.

  Thank you

  Sandeep

• Brightness changes not at all after upgrade windows 8.1.

  SVE14A27CXH

  Brightness only changes not at all after upgrade windows 8.1.

  Hi OT7!

  You can check this page to update the Vaio update software, you also try to turn off the screen brightness auto set by referring to this page.

  -Tim

  If my post answered your question, please mark it as "accept as a Solution.

• I have a white screen after upgrade windows 8.1 on HP Pavilion e005sv 15.

  I have white screen, only the mouse pointer after work

  upgrade Windows 8.1 on HP Pavilion e005sv 15.

  Any help please.

  I have not tried the updated graphics drivers again as my client must use the laptop. I'll get to try this weekend. Thanks for your help

• Pavilion slimline s5-1014: CD rom is not working after upgrade Windows 10

  My Cd rom no longer works after upgrade to windows 10.  I read the posts that I should go to Device Manager to update, however it doesn't appear in the device driver.  How to solve this problem?

  Thank you

  Hello:

  Try the steps listed in 4 of the resolution on the link below...

  https://support.Microsoft.com/en-us/KB/314060

• HP Pavilion x 2 10-n011nl (Suns: laptop locked after upgrade windows 10)

  Two days ago, I bought a HP Pavilion x 2 (red sunset) 10-n011nl and immediately I started upgrading Windows 10. This medication is ok (no error message), but the first new starting system, the machine is in a loop! Only a black screen with white logo of HP and animation circular points. It is impossible to stop this, none CTRL-ALT-DEL or other. I have to wait for low battery condition (more then 6 hours!).

  And even once, he repeats the loop.

  What can I do?

  Thanks in advance

  Because it is new, maybe start to type Esc as soon as you press the button start.  That should bring up a menu before starts the boot process.  In this menu, click F11 to run the recovery.  Who will restore the PC to 'new factory' and retry the upgrade of Windows 10.  You might want to try the media creation tool page, if it fails again.

• ENVY Ultrabook 4-1118tu: no sound after upgrade windows 10

  I've updated for windows 10 (probably my first mistake)

  First of all, I got the screen flashing - problem was to restore the computer difficulty settings - this is not the current issue, gives just some information.

  Since then, I've lost ALL SOUND.

  Not only I lost the sound, but I have no devices appearing in the play sounds option more.

  

  After reading several messages forum - it's what I tried

  HARD RESET - no change

  REMOVE IDT high definition codec, restart maching - no change

  Codec IDT high-definition REMOVING, RESTART HARD - no change

  

  Downloaded a file sp63932, it says that it was incompatible

  RUN HP SUPPORT ASSISTANCE, he said that there is no error and no update

  WINDOWS UPDATE - he said that there are no updates

  NO SOUND through speakers or LAPTOP computer (obviously, no audio playback device installed) - no change

  Tried the driver UPDATE, using devices - get the error message in the image

  

  I'd appreciate some help here.

  Have spent about 4 hours on this now and not getting any where - would just have the back of his.  ;(

  Thank you

  Erin

  Hi, Erin:

  Two other members of the forum lost sound on a computer desktop and laptop PC with the IDT audio controller after upgrading to W10.

  What has worked for them was to install the audio driver IDT W8.1 support their PC and driver page.

  It's the support page for your laptop.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp60188.exe

• Battery not detected after upgrading Windows 10

  Improved my Aspire 5738 of Win 7 to 10 to win. After upgrade, no battery is detected by the laptop. I like to win 10, but if no solution is found, I'll neeed to roll back to Win 7 fast enough, or I'll be stuck with a laptop that is always running in an office environment.

  I tried the old standbys (unplugging everything, release the power button, then restart, then adding back battery), but does not work. Someone at - it any other ideas / suggestions /directions?

  Thank you!

  Please check if you can make a battery driver reset. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. +++ If I have been helpful, a KUDOS is to enjoy and don't forget to mark "Accept it as the Solution", the post that solved your problem. Thank you.