HP Pavilion p6710f: Question of compatibility before panel connectors

Similar Questions

• HP Pavilion p6 - 2220t: motherboard layout and before panel connector pinout

  Hello

  I need the layout of the motherboard for the TX of H-Cupertino3-H61-ua (Cupertino3).

  This page:

  http://support.HP.com/us-en/document/c03329092

  available and the legend are missing.  I need to know the pinout of the connector cover (power, hard drive, etc.).

  In all cases, a link to a detailed repair and maintenance manual would be a great help.

  Aloha!

  It would be of no use?

  

• Pavilion DV 6000: motherboard compatibility

  my laptop suddenly empty out and lights are but a few seconds after a beef turns. now, I decided to change the motherboard but I am not an expert in computers, my question is compatibility. my original motherboard reference number is

  434722-001, would have PN 434723-001 is suitable replacement? can someone please suggest a replacement?, your help will be greatly appreciated

  sincerely, GENE

  No, seems to be different. This one will fit.

  http://www.eBay.com/ITM/HP-434722-001-laptop-motherboard-for-Pavilion-dv6000-Series-notebook-PC-/262522846806?hash=item3d1f94be56:g:260AAOSw7XZXhnTK

• New HD for HP Pavilion P6710F

  Hello

  I have a HP Pavilion P6710F PC and it came with a HD internal Seagate Baracuda ST1000528AS (7200 RPM, SATA 3 Gb/s, 1 TB, 32 MB cache).

  I want to add a new hard drive.  Plug the motherboard is minor details when it comes to connections.

  My question is this.

  (1) can I add a new

  • HD SATA 6 Gb/s (example: WD 6 Gbps )

  o

  • Cache 64 MB SATA III HD

  on my computer?

  (2) do I need a new power supply if I decide to do?

  I appreciate your help.

  Hello

  You can certainly a HARD drive that you specify, however, I believe that your motherboard doesn't support Sata II (3 Gb/s) for a disk HARD Sata III will operate at speed Sata II.

  You don't need a new power supply - you should find a power connector for the new disk unused turn the power connector for the existing HARD drive.  You'll need to buy a Sata cable to connect the HARD drive to the motherboard.

  A guide to add/replace a HDD of your PC can be found on the link below.

  http://support.HP.com/us-en/document/c01684358

  Kind regards

  DP - K

• HP pavilion P6710f wifi

  On the Pavilion P6710f motherboard, there is an integrated, wireless chip that has a small wire that leads to external wifi taking, in which the wifi antenna connects.

  When installing a new graphics card, the wire came individual of the wifi chip.  How could this be fixed?  It seems to have been set on the plant, but it is so small it's hard to say.

  Your answers are appreciated.

  Here are the specifications of your desktop HP Pavilion p6710f. According to the specification, your computer uses a card 802.11 b/g/n Wireless PCI - e mini half-length. My p6787c using the same adapter wireless... see photo below;

  

  Your installation gradually close like the photo above? If so, the "wink brass" on the wire must press the coupling "Magnetize the brass" which is on the wireless card.

• HP Pavilion p6710f: updating graphics card for hp pavilion p6710f

  Will be the

  EVGA GeForce GTX 4 960 GB FTW ACX 2.0 +.

  Fit inside the Hp Pavilion p6710f without having to change anything? I already bought a new power supply that provides 500 watts then im good on that front, I want to know it will be good and not conflict with something pre-existing in the PC.

  Thanks in advance for the help!

  Hello

  Consult this publication of the article.  Open your PC and make a few measurements.

• HP Z620: Front panel connector pinout

  Kindly help me on what is the pinout of front panel to motherboard HP Z60 connectors? Nothing is indicated on the map.

  

  Here is the motherboard front pinouts.  This is a view of the motherboard.  PIN 6 is the key, a missing brooch, which helps determine the orientation of the connector.

  

  The Z420, Z620, Z820 and all have the same front panel connector pinout.

  -Terminals 2 and 4 are for the power light.  HP systems have back to back LED connected between these pins.  A white LED lights up in red and a normal functioning (and flashes error codes) when there are errors.

  -Connect a switch momentary between pins 7 and 8 will turn on the computer and off.

  -The sensor pins are for a thermal sensor in cable from the front panel.  If it's sensor is not installed, the system fans will probably ramp at full speed and very noisy.

  -Speaker Out is the internal speaker.

• HP pavilion dv6-3280 ca: compatibility with Windows 10

  Hello

  Just upgraded to Windows 10.

  Someone was able to install the drivers for "AMD Mobility HD 5000 Series"

  and "ATI Mobility HD 4200 Series"

  I get "Windows has stopped this device because it has reported problems. (Code 43) "for the AMD

  and "no driver installed" for the ATI card

  Thank you

  RJLX

  Hey @rjlx ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook dv6-3280 ca and problems with compatibility with Windows 10.

  If your computer is experiencing problems find and install updates of the operating system, try to use the Windows Update Troubleshooter to fix the problem.

  If this is not enough, you need to restore the laptop to a previous version of Windows.

  Thank you.

• Difficult question, why the transformation Panel said 'no shape properties' when I select a path?

  Hey, Zuko here (no, really I'm Erik)

  I have a bone to pick with the AdobeIllustrator CC race Committee.  Before, I thought I knew everything there was to know about this Panel.  But now, I hit a road block, it seems that no one else in the internet faces.  My question has to do with how the traces of the pen are treated by the race Committee and (I guess) if they are recognized as "smart shapes.

  Here's the problem: normally when I create a path with the pen tool, I can immediately afterwards, select it and transform it using the Panel forms (especially the transformation Panel).  This means that I can choose the width of profiles, create dashed lines, etc.  However, something happened to illustrator between yesterday and today (I don't know what) and now when I create a path with the pen tool and select it, the transformation panel reads: "no available shape properties." Or something between these lines.

  I am currently using Adobe Illustrator CC as I already said, my operating system is Windows 10, and the only thing that has changed in the way that I use work is connect with the intuos pen tablet.  (Not plugged in now, I'll perform an exorcism on her.)

  That's all for now, I don't have screenshots, but once I get off work in 8 hours, I'd be happy to give them.

  This is my desperate hour... Help Adobe creative community, you're my only hope. * static *.

  -Erik

  Erik,

  If not more specific/bright suggestions appear, you can try the list:

  Sometimes, (some) things may fail or stop working for no apparent reason. When (other) possible reasons/remedies do not work, it is perhaps a kind corruption (temporary or permanent), or even preference settings which disturbs, which can be cured with something on the following list put in place in order to provide a catch-all solution for otherwise intractable cases. It starts with a few easy suggestions and safe) 1 and 2) for cases less serious and goes two ways 3) and 4) to reset the default preferences (easily but irreversibly and more laboriously but more completely and also reversible), then follows a list 5) various other possibilities, and it ends with a complete reinstallation 6). If no other suggestion doesn't work, or if no other suggestion appears, you can start on the list and decide how to go or who can apply.

  The following is a general list of things, try when

  (A) the question is not in a specific file,

  (B) you have a printer installed, connected and turned on if it's a physical printer (you can use Adobe PDF/Acrobat Distiller as a printer by default without the need to have a printer on, of course you will need to specify when you really need print on paper), and

  (C) It is not caused by problems with opening a file from external media (see below).

  You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically may be corrupted/inconvenient preferences); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  6 (A) uninstall (check the box to delete the preferences, if any), B) run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) and C) reinstall. It is important to use this step three way: otherwise, things may persist.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Stupid question about compatibility

  I would be happy to search the forum for inDesign to discssions on compatibility with other editions, but it seems that it is impossible. Where this stupid question.

  Problem: a uniform translation ends me back-saved files in InDesign CS, which I created originally, but I can't open them.

  This that I have to spend $500 on an upgrade so I can open it or is there a way they can back - save it so I can open it?

  Thank you

  I think that I get it now. I doubt that the files have been saved as files InDesign CS. As I said before, it is impossible to back - save as InDesign files. Only InDesign X can save to a file, InDesign X. very probably, the provider is you open files in a later version of InDesign and save as native file of this version, InDesign 4, 5 or 6, you cannot open.

  You have three options:

  1. You are upgrading InDesign to be compatible with the version of the provider.
  2. Only translated text files, then you replace the text in your files.
  3. Having the export INX since InDesign 4 provider. If they use later to edit it can be a loss of hassle and risks of formatting.

• HP Pavilion a6010n: Question

  I have a HP Pavilion a6010n PC. Now, my computer has Windows Vista Home Premium.Now my problem is sometimes it will load windows and sometimes it wont. It will start up to a blank black screen. And does nothing after that. But when I installed Linux Mint 17.1 Rebecca.It will do a full load on the desktop. But my question is why wont he do the same thing for windows vista? My graphics card and motherboard works very well with problems Linux.No it. IM at a loss about why windows not to load not completely on the desktop. Now, I can't afford to take it to a computer repair shop. Also, cannot afford to buy another. I hope someone here can help me.

  I think there may have been a little problem with Vista.  If you did a system recovery, he was able to boot Vista.  That's what you were doing with Linux.  A new installation can solve many problems.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion dm4-2070us bluetooth compatibility with Samsung M575

  Is there a Bluetooth known compatibility issue between the hp Pavilion dm4 2070us and mobile phone Samsung M575?

  Cannot find the other during the attempt of a 'add a device '. I already double checked the basics. Phone is fully powered, not asleep, Bluetooth active and visible. Installed and enabled on the laptop Bluetooth drivers

  Windows Mobility Center shows no "integrated wireless devices.

  I think we beat that poor horse to death. I'll stick with cable for the passage of the things from the phone on the computers of his life.

  Another "Star" of this phone, which is more than the function. It also has "GPS".  Except that it takes so long to find that he is useless of functionaly.  Blue teeth it can have are probably fine for a wedge head "talk to yourself.

  I'm on it.

  Eli

• Laptop Pavilion dm1 4010us and beats audio Panel does not work.

  I have a pavilion dm1 laptop 4010us, running windows 7 64 bit and beats audio Panel does not work.  I click Start, Panel, Sound and the Beats Audio Control Panel icon is there, but nothing happens when I click on it, so I can't change my audio settings.  Help, please

  Hello

  Try to use Recovery Manager to reinstall the IDT HD Audio Driver (this will also reinstall the Beats Audio interface) - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  http://support.HP.com/us-en/document/c01868333

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• DesignJet T1100ps: Question of compatibility T1100mfp

  Hello.

  My company is owner of scanner and plotter connected together via a USB cable. The two devices are connected to our network separately. Scanner is DesignJet T1100mfp and DesignJet T1100PS plotter.

  In the near future we would like to replace our current plotter with the newest one, but we would like to continue to use our current scanner (with regulator).

  We contacted the official HP service center for our country and their response was that they do not know the answer and it is should be tested first. Now for us to test it, we would have to buy the new tracer first, then test it, which is obviously not an option.

  So my question is can where to find list of supported for this scanner devices so that we could get the best ratio price/performance ration about compatibility?  DesigjJet T1300 is compatible with this particular scanner. Or can anyone suggest the best solution.

  Thanks in advance

  Hello

  You can connect the T1300 on a T1100 scanner.

  You need to update the software of your scanner first.

  Here is the link to get the software

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=PL-141099-1

• Distance before panels: vi requested is not loaded in memory on the server computer

  I have a program that uses dynamically loading the facades which are access via a web page using panels before remote. I have several projects doing this successfully. This new program, however, does not properly work in web pages. I get the message "requested vi is not loaded in memory on the server computer." The main difference for this new program, it's that I have the project organized in libraries. For some reason, the path specified for the front panels does not resolve correctly. The Organization of the project are:

  

  And here is the HTML code to access the front panel:

  I can't understand why the front will not load. I know this has something to do with the project libraries, and how to identify the correct path to the VI, but I don't know what I'm doing wrong. I tried to run the project in debug mode and build an executable and executes. These two with the same message. I know that the panels are in memory and running. And as I said earlier, I have several other projects that work well, but those who do not use libraries.

  Any help or idea would be greatly appreciated. Thank you.

  I found the problem. Finally, there is an another executable running using the default port has been specified for the development environment. In my case, I put it to 10500. Thus, the built application used this port for the Web server of NOR. The solution ended up being to specify another listening port in the niwebserver.conf file that is created when you build an application.

  

  After this change, everything was fine. Loads of everything very well and I can run multiple applications.