HP pavilion p6754y: is the slot on my motherboard 1.0 or 2.0 pci

Similar Questions

• HP Pavilion 510-p010: How can I insert my xD Picture Card into the slot

  I just bought this HP Pavilion 510-P010.  I was told the slot would fit in my sD card, I specifically asked about this until I bought it.  They said he would do.  I can't that it fits in the normal way, does it go side?  And if so, what sense does face.  I'm afraid to stay in it and something will happen if I do not do so in law.
  The card is a card, xD-Picture Card 2 GB M.

  You said it was an xD card, which is specific to Olympus and Fuji XD Picture Card of the camera.

  I don't know of all model Compaq or HP who could accept these cards... enlighten us?

• HP Pavilion p6130y: does the work of ASUS NVIDIA GeForce 210 with the HP Pavilion p6130y pc graphics card

  Could what possible graphics cards you use with this pc? because I am looking for an upgrade that willl work with the 300 watt power supply

  Hello @DeAdEnDsHaDoW,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I read your post on the issue of the graphics card and wanted to help you!  I understand that you are looking to upgrade the desktop computer and wanted to know what might work.

  Here are the specifications of the product of the GeForce 210:

  Bus support: PCI Express 2.0

  Minimum system requirements power: 300 W

  Here are the specifications of the HP Pavilion p6130yproduct:

  Expansion slots: 1 PCI Express x 16

  Power: 300 W

  Based on the above information, the Bureau should have sufficient power to use the card.  However, you may experience a lack of performance, because of the PCI ports.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Pavilion 15 ab210tx: ab210tx HP Pavilion 15-how many slots of ram and maximum ram support?

  How many ram slots is available for this model? What is the maximum ram supported by this model?

  in the specifications, it is mentioned as 1X8Gb but no information on the slots and put upgraded ram

  @sekharece

  Slots MemoryTwo SODIMM - NO client available / expandable
  Twin DDR3L-1600 memory support

  Supports up to 16 GB of RAM in the following configurations:

  16384 MB total system memory (8192 × 2)

  12288 MB total system memory (8192 × 1) + (4096 × 1)

  8192 MB total system memory (8192 × 1.) or (4096 x 2)

  Memory system total 6144 MB (4096 x 1) + (2 048 × 1)

  Total system memory of 4096 MB (4096 × 1.) or (2048 x 2)

  Your Service Guide here.

  http://support.HP.com/us-en/product/HP-Pavilion-15-notebook-PC-series/8499306/model/8818875/manuals

  REO

• My charger no longer insert into the slot

  I had an otter box on my phone with it on the charger housing. I spilled some water on my phone in this area, but it has not been completely submerged. I put my phone in the rice, even if nothing was wrong with the phone, just in case. After that, I went to charge my phone and the charger would not fit in the slot. I tried to clean it with a paperclip and some dirt came out, but it did not work. I also tried to clean it with a toothbrush and a blow dry, but nothing. What can I do?

  Hello mia0817mac!

  Just to make sure I understand correctly, you tried to load your iPhone after getting a little water near the cargo but the lightning cable is more able to fit into the slot.  It is important to be able to plug the adapter to load so that you can use your iPhone without the battery dying.

  If you are able to get the cable, then take a look at this article for steps to do if it does not charge:

  If your iPhone, iPad or iPod touch will not charge

  However, if the adapter of lightning will not fit inside the slot at all to allow you to test the above steps, then he would probably need to be repaired.  To see on service options, you can contact the Apple Support or find a service provider authorized Apple or Apple store near you:

  Contact technical support

  Find locations

  Have a great day!

• Re: NB305-10F - high-pitched noise of the slot of the headset

  Hey all,.

  I recently bought a Toshiba NB305-10F and at first everything seemed fine, but I found now that when I put headphones or external speakers in the headphone slot it emits a high-pitched noise. It is intermittent but is it about 95% of the time. Unfortunately this makes it nearly impossible to listen to any music or audio books through my speakers or headphones! It doesn't seem to be any sound when I use the built-in speakers.

  Any help would be greatly appreciated. I had to send my first model for other reasons and not want to do the same thing again!

  Kind regards

  Rob

  Hello

  You use the version preinstalled Windows from Toshiba?

  I think that what you can do is update the audio driver and if it doesn't work you should get in touch with an authorized service provider. It seems that something is wrong with the slot of the headset, and it needs to be repaired

  A friend also told NB300 but he never noticed such a problem.

• NB100 supplied with Bluetooth and the slot for sim card

  I wonder what model come with bluetooth and the slot for sim card,.

  The NB100? Have a look at the brochures on the Toshiba site.

• I can't find the slot of memory for the Satellite S70-B-10V

  How can I upgrade my memory to laptop? It is not a memory slot at the bottom of the laptop.

  As already mentioned by Timox: there is no separate access to the memory locations.
  The slot of memory and HARD disk access is hidden under the hood.
  So to put level memory and other parts, the laptop must be disassembled and the bottom cover must be removed along with other pieces as ODD, battery, etc.

  It is a bit tricky, but the most important fact is that the removal of the bottom cover could void the warranty, and I guess you don t want to lose the warranty.
  Any hardware upgrade must be performed by the authorized service provider.

• New RAM cards are in the slot on the iMac 27 "late 2009?

  does anyone have experience that new RAM cards does not match the slot to the iMac 27 "late 2009?

  The computer has been identified as an iMac 27-inch late 2009 model correctly?

  In the affirmative - download of database http://mactracker.ca feature - specs are:

  Introduced October 2009

  Abandoned July 2010

  Model identifier (Core 2 Duo) the iMac10, 1 iMac11, 1 (Core i5, i7)

  Model number A1312

  EMC 2309 (Core 2 Duo) - EMC 2374 (Core i5, i7)

  MB952LL/A order number (3.06 GHz), MB953LL/A (2.66 GHz)

  Memory maximum 32 GB (Core i5) or Core i7 real16 GB (Apple)

  Memory slots 4 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  • Installation of memory in an iMac - Apple Support

  Read carefully this ^ support article since there are several different model iMac features listed.

  Processor: Intel Core 2 Duo (E7600, E8600), Core i5 (750) or Core i7 (860) ('Wolfdale, Lynnfield')

  Processor speed: 3.06 or 3.33 GHz (Core 2 Duo), 2.66 GHz (Core i5), 2.8 GHz (Core i7)

  Architecture: 64 - bit

  Number of cores: 2 or 4

  Cache memory: 3 MB (3.06 GHz) 6 MB (3.33 GHz) L2, 8 MB (2.66, 2.8 GHz) L3

  System bus: (3.06 GHz Core 2 Duo) to 1066 MHz or 1333 MHz (3.33 GHz Core 2 Duo)

  -2.5 GT/s (Core i5 and Core i7) or Intel Direct Media Interface (DMI)

  Graphics Card ATI Radeon HD 4670 or Radeon HD 4850

  Graphics memory 256 MB (Radeon HD 4670) or GDDR3 512 MB (Radeon HD 4850)

  Where did you get the RAM and what are the specifications and the brand name?

  • Memory specifications for 'late 2009 iMac 27-inch model' of OWC, macsales:

  http://eShop.MacSales.com/shop/memory/iMac/DDR3_21.5_27

  Two sellers of quality focused on the Mac are OWC, macsales and Crucial.com. You would still be

  to identify the model of computer generation exactly & get quality RAM for them to work.

  And notice the shape of the keyway of the memory chips that they need to be oriented correctly

  in order to fully and properly inserted into the slots. If they are the correct specification for your iMac.

  Good luck & happy computing!

• Upgrade of Qosmio F30/695LS (the slot with a weird module hard problem)

  So I try to upgrade my laptop, its starting to show his age in this world or the very rapid evolution out. I want to add two 1 GB RAM cards. I read somewhere that 2 GB is memory max does anyone know if it is in terms of upgrade only or including 512 who comes standard? The cards must also be 200 pin DDR2 SO-DIMM, but I don't know how fast that is capable of confronting the laptop, I can put 800 MHz in there? Now, I had read that the manual except that it's like the laptop in Japanese! I'm also trying to add a second hard drive, there is a second location, but... There's something seriously weird sitting in there! Here are some pictures to help identify it:

  [http://farm4.static.flickr.com/3230/2791686827_13b6e68776.jpg?v=0]

  [http://farm4.static.flickr.com/3205/2792538470_2d6fed3710_b.jpg]

  For me, it seems to be a kind of a dummy module, but like I said I don't know noty - whatever it is, it causes a lot of problems - it can not be removed from the underside of the laptop, which means I have to open all and pull it out of the bottom of the keyboard (if that is even possible?) and I don't want to not pull something important on accidentally! Thus, any information would be very useful!

  Hello
  If you want to upgrade the RAM for Qosmio F30, then you can use SO DIMM DDR2 533 Mhz PC2-4200

  MODULES MUST BE ORDER AND INSTALLED in PAIRS for Dual Channel mode.

  so, you can order the 2 GB kit (2 x 1 GB).

  You must remove the old module 512 of your laptop, you can also see the speed written.

  and on the strange object sitting in the slot of the HARD drive, I think it's a kind of wireless or Bluetooth card because there is an aerial cable attached to it, you can try to unplug the card and turn on your laptop and see if there are wireless devices or Bluetooth removed from the system.

  also try to find what is written inside this card, a reference number or Description and post it to us.

  This laptop sold in Japan only and that the specification is different from that which is sold in europe.

  Kind regards

  Reaver

• How to remove the SD card in the slot

  Hello..

  What can I do with this problem... my SD card is stuck in the slot.
  My little sister has inserted a card into the solt, but unfortunately, I have not installed the required software.

  So please help me as soon as possible.

  How can I get the card...

  First it s no matter whether or not the software (driver) SD card has been installed.
  It should be able to remove the SD card always! Just to turn it off

  But I have questions;
  What cell phone do you have and you insert a compatible SD card into the slot of the card reader?

• Pavilion p6 - 2020t: HP-Pavilion will identify the new graphics card

  Hello

  I got a HP Pavilion for a few years now and never updated my BIOS (not that I know well). I'm trying to install a new graphics (gtx 750ti) card and the computer does not recognize it. It shows the first screen, and then a black screen and a beep, then it crashes. Keyboard does not work, cannot get into the BIOS.

  I tried everythign with current BIOS, boot legacy and ensuring that the Integrated GPU is disabled, and nothing works. I also did research on food, and but it is not terrible, it should work with this graphics card (the fan even spinning).

  According to my research, the current BIOS is simply not recognize, and I need to update. My current version is: FRIEND 7.16, 05/10/2011

  I navagate through the HP website and it said that the automatic update should update the BIOS for Windows 10, and it won't let me download all drivers (although the last BIOS update was 2011). I tried to enter the FRIEND's site and download it from there and it won't even install their drivers, it says that flash is not supported (probably for Windows 10).

  If someone could give me an idea of how can I get a newer version of the BIOS for my motherboard, it would be much appreciated as I'm pretty sure that's the reason why the computer is not recognizing the new graphics card

  The risk is that the video card is one that is for a newer PC with an EFI BIOS. That's why the empty card is not recognized.

  If you use a card equipped with a switch on the virtual card allowing the use in legacy and uefi BIOS it will work with the BIOS of your PC.

  Sapphire makes video cards that have this capability. Take a look at the catalogue. What you need is a PCIE x 16 card video with switchable legacy\uefi BIOS or legacy support, but not only UEFI.

  http://www.sapphiretech.com/catapage_tech.asp?cataid=8 & lang = eng

  You cannot change the type of BIOS that your PC has in the UEFI.  It's a question of his being of a generation of diferent from the PC.

• I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  This was after the 3 beep error and I couldn't restart the Mac with one of the 2 GB of Ram into the lower slot.

  Is there a way to test if the top housing is faulty or just dirty?

  Thank you

  svchild wrote:

  I have a faulty ram (top) slot for a Mid 2012 Macbook Pro 13 "i5.  Can I install a 8 GB Ram in the slot below or is maximally 4 GB?

  Yes, the MBP will work with a single module of RAM installed, but there will be a slight performance decrease.  A MBP 2012 will accept a module of 8 GB RAM.

  Is there a way to test if the top housing is faulty or just dirty?

  Install each RAM module individually in each slot, leaving the other empty.  If the two RAM modules work in a slot and not the other, the slot is faulty.  Sometimes the adjustment screw can resuscitate the slot.  If this is not the case, make an appointment at an Apple store for a FREE evaluation.

  Ciao.

• How to remove the SD of the slot of the card reader - Satellite A100?

  Hello
  Is there someone to help me? I inserted a 64 MB SD card into the slot of the player card of my Toshiba A100 model. This is the first time that I inserted the card. The card is inside the slot. I can't get out! I have no idea how to remove the card from the card reader location. I can see the contents of my SD card, can open files too. But how to remove it out of the slot. Help me please give your idea to remove the card from the slot.

  Arjun

  Hello

  To my knowledge the SD card slot doesn't have a whole extra help as the slot PCMCIA to remove the card.
  You have to remove everything simply. Try to enter the map and move it. You can try using a pair of tweezers. Maybe it helps

• Satellite L300 - problem reading memory in the slot/Bank 2

  Hello.
  I have a Sattelite L300 with 2 * 1 GB memory which had strange problems of som.
  Among a large number of tests, I tested the memory inside.
  When there is a module of memory installed in slot/Bank 2 (the one closest to the bottom of the pc)
  I get an error. Bought a new module, but I still have an error, so the error must be with the Bank/slot.

  Tried cleaning the connectors of slot with a brush-glass, without a bit of luck.

  The pc works perfectly (but slow), with 1 GB installed in the slot/River.

  Can someone help me with this problem?

  Concerning
  Jens (Denmark)

  I agree with Akuma.
  If two modules don t work in the second slot but in the first place, then the second slot is defective and that means this motherboard must be replaced.