Similar Questions

• Integrated sound card failure. Will be BIOS let me add a sound card into the PCIE slot?

  Edge sound card failure, locking systematically all, (Yes, I've updated all the drivers, codecs) so want to put in the new sound card. BIOS let me add a sound card into the PCIE slot? (although course after the ReakTek onboard sound disabled) I don't see the option to choose PCI or PCI-E in Setup (F10 at startup) screen for audio.

  Pavilion a6200t office, Windows7 SP1

  System Board is Lancaster8 1.04, BIOS 5.18

  Hello! Yes, it will let you install a his own card, as long as you have a vacant home

  spacechild

• This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  I tried to connect a new TV to my 8700 with HDMI and I get this message:

  This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

  1. power off the computer
  2. plug the cable from the monitor into the graphics add-in card connector. This may require a video card or the video adapter cable.
  3. turn on the computer

  I unplugged from the back of the computer and put it in my drive macbook & blu - ray. Both worked.

  I tried to find a solution to this already, but none really helped.

  Thank you.

  You need a video card, not the port on your computer HDMI connection:

  

• Open with options: I want to add a new application to the list right click on file-> open with and rearrange the list so my search app is first. I know that I can use open with-> other and select any application, but it takes too much time since I u

  I want to add a new application to the list right click on file-> open with

  and also reorder the list so my search app is first / top of the list.

  I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.

  Basically, I'm looking for a configurable way configure open with, something more to send to Windows.

  Thank you very much for all the advice offered.

  The operating system, not you, not control that open with the menu command.

• When I add a new event to the calendar, what I type is 'New event' when I press return. Why?

  When I add a new event to the calendar, I type the name of the event in the field, change the time, add notes, etc. When I press return, the new event indicates briefly on the calendar as what I typed, but most of the time, it is up to 'new event '. I tried to change my sequence of this type I and sometimes validate instead of return, but it doesn't seem to be a reason for this behavior. Also, it happens all the time, just most of the time.

  It's extremely frustrating because if I don't notice it right away, I don't know what was the event.

  Any suggestions?

  I use OS X, 10.9.5.

  Maybe this will help.

  Calendar may not enter the new event.

  Calendar may not enter the new event (2)

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• How can I add a new site under the heading 'Favorites '?

  How can I add a new site under the heading 'Favorites '?

  See: https://www.winhelp.us/internet-explorer-11-favorites.html

  He will explain

• What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  Mr President.

  What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  --SL_CUSTOMERS table data
  
  
  INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
  
  
  
  

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG 
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"   
  FOR EACH ROW   
  BEGIN   
  IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN  
    SELECT SL_CUSTOMERS_SEQ.nextval   
      INTO :NEW.CUSTOMER_ID  
      FROM DUAL;   
    END IF;   
  END;   
  /
  
  
  
  

  When I try to insert several records with the seq.nextval it gives error

  violation of primary key.

  INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd')
  ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  One error saving changes to table "ALIZA"."SL_CUSTOMERS":
  Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  
  
  
  

  Concerning

  Mr President.

  I find the solution by creating a function before the triiger

  as below

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS
  BEGIN
     RETURN SL_CUSTOMERS_SEQ.NEXTVAL;
  
  END;
  /
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"
  FOR EACH ROW
  DECLARE
  dummy VARCHAR2(200);
  BEGIN
    dummy := get_SL_CUSTOMERS_vId();
    :NEW.CUSTOMER_ID := dummy;
  END;
  /  
  

  It works very well

  Thank you all for the suggestions.

  Concerning

• Cannot add a new Place in the Version 13 of the first multimedia elements

  Hello

  I use the trial version of the first elements Organizer, which I plan to purchase if I can get this problem resolved.  When I click on 'Add locations' button at the bottom of the screen AND when I click on the Green over the button "Add a new place" at the scene of the altarpiece program Barbadori crashes and I get the message "program not responding" Windows 8.1.  I clicked "Wait for the program to respond" and waited more than 5 minutes and nothing happens.

  This does not happen to the Photoshop elements Organizer; However, all I need is the organizer and the video editing so I spent with elements of Prime Minister.

  Thank you

  Andrea

  Please do not take into account.  I rebooted and installed the updates of Windows and it seems to work fine now.

  Thank you

  Andrea

• How can I add a new Panel to the Accordion widget in-between two other (NOT at the end)

  In the Accordion widget, the + button at the bottom adds a new Panel at the end I have a series of panels that are alpha-sort and need to add a new Panel in the middle... I can't understand how do without redoing all this. is there a way to do this?

  Just enter the title of the accordion section and drag it into the right position.

• Can I add a new trigger to the beginning rather than at the end of a blank publication widget?

  Hi guys,.

  I am creating a page of photo gallery using the widget a blank publication. I want to be able to add new content on a regular basis by adding new pictures to the top (beginning) of the gallery for my most recent photos indicate at the beginning of the gallery.

  Currently, the small + symbol to add another trigger doesn't add a new trigger to the right (bottom) of the trigger group, putting actually newly added content to the rear of the gallery rather than at the front. I am able to get to add a new trigger in the Group and have that trigger to be first in the group to display?

  The widget seems to display the same behavior of the command, so I'm pretty stuck on how to work around this problem. I tried to re - arrange triggers, which became incredibly heavy but everytime I want to add new photos in the Group and move older further down in the order of the gallery.

  Any help would be greatly appreciated with this, cheers, David.

  Hi David

  With composition, adding the image would be as well as the addition to use the most (+) sign which will add next to the previous content.

  At this stage, you would have to re - arrange the triggers or you can display them randomly if you want not to re - organize. Those are the only options.

  Thank you

  Sanjit

• Add a new link in the R12 registration page

  Hi all
  
  Must please send me the steps to add a new link in the registration page in Oracle istore R12
  
  Thank you

  Salvation;

  Please check:
  http://docs.Oracle.com/CD/E18727_01/doc.121/e13575/T349071T350482.htm
  How to disable the 'new user registration' link in Istore [ID 1224813.1]

  Respect of
  HELIOS

• Add a new instance to the top of the next page

  I created a dynamic form of the fluid (a daily report of workers to fill form), which is likely (based on user input) to span several pages. I added a button 'Add a new day' at the bottom of the form, which, as it says, add another day to the shape. However, I can't do the new instance in him to move to the next page, it's just created immediately after the previous instance.

  I tried all the suggestions of other threads to help, but I still can't make it work. The form creates a blank page that I didn't need, or he continues to add the new instance just below the other.

  Any help would be greatly appreciated.

  Hmm,

  This is the script of the conditional jump. Try thi sapproach: https://acrobat.com/#d= * 2f7axX-JHCdLi * SH * pO2Q.

  Niall

• Unable to add a new column to the table of the LCD? Option, just usually add it.

  I have a form of LCD with a table in it. Im trying to simply add a new column to the table. The option is there, but the column appear just after clicking Add the column to the left. I selected a column, right click the space > insert > column to the left. But the habit intsert. The object table properties tab shows lines and colum numbers, but they are grey.
  
  See screenshots:
  
  http://www.emermed.NET/staging/forums...
  
  http://www.emermed.NET/staging/forums...
  
  It is a dynamic array, where a new line can be inserted using a button. Is that the dynamic nature of the question? ID hate to cancel all the flow dynamics and programming just to add a column, and then reapply them all.
  
  Thank you!

  Hello

  You do not add the columns in the object > palette (screenshot 2) of the Table. I suspect that the problem is that it is not enough on the page (in the content area) to add the column. In the screenshot 1, if you look at the width of the column highlighted from the space to the right of the table, you will see that a column can be added due to restrictions of space.

  Reduce the width of the column highlighted (temporarily), and then add a column. Once added, you can resize the columns to match the width of the page.

  Hope that helps,

  Niall

• How to add a new certificate to the keystore jre1.6?

  Hi guys,.
  I ' new n in Java programming and I am trying to add a new certificate in the keystore jre1.6 but I am facing a little problem! "When I try to run the below command line, I get this massage.
  The file name, directory name or volume label syntax is incorrect. "
  
  "C:\Program Files\Java\jre6\bin\keytool" - "C:\Program Files\Java\jre6\lib\security\cacerts" - import - keystore file D:\cert.cer
  
  Thank you

  Step 1. change the location

  CD C:\Program Files\Java\jre6\lib\security

  Step 2, certificate of installation by specifying the following settings

  "C:\Program Files\Java\jre6\bin\keytool" - import - trustcacerts - keystore cacerts file - storepass changeit - noprompt-alias codcert1-file D:\cert.cer

  Alias must be unique, you can give a name

  Dinesh