HP Pavilion p7-1400z CTO memory

Similar Questions

• Upgrade memory of HP Pavilion Dv5t-1100 CTO Question

  Hello world:
  
  I own a laptop HP Pavilion DV5t-1100 CTO Notbook of customizable entertainment... Model number: FL773AV and CNF8471PML series number. My OS changed to Windows 7 Professional. My number of parts of current memory cards are 48468-001, 2 GB, 800 MHz, 200 pins, PC2-6400, SDRAM Small outline Dual In-line Memory module (SODIMM).
  
  I run Windows Virtual PC to Win XP, motivated by the need to use some old software professional quality for economic reasons (AutoCad, etc.). I am a small business owner that gifted throughout the day. I need 8 GB of ram to make sure that I won't run into snags of lack of memory and to keep my laptop works well.
  
  Question: My motherboard is configured for except the upgrade to 8 GB? HP parts list does not list the card 4 GB or 8GBkit for this laptop model. Please notify.
  Thank you
  n

  I see not the Patriot memory on cheeper $40.00 then the Crucial. I really thank you once again... I need this laptop to keep in top condition for business and personal use. You gave a great piece of mind.
  
  Thanks again Paul.
  n

• Upgrade memory for HP Pavilion 23 - g040xt CTO all-in-One desktop

  When I ordered my

  HP Pavilion 23-g040xt CTO of all-in-One desktop PC I could only afford the version of 4 GB of Ram. Now, I want to upgrade the memory up to 16 GB. I have a few questions

  1. I noticed all this in a use SODIMM and I was wondering if I could buy any DDR3 SODIMM for this or if I have to buy a specific manufacturer?

  2. now, I have only 4 GB using 1 of the 2 memory slots. I'll be able to buy 2X8GB and use this location empty on my motherboard and run dual channel?

  3. How do the memory locations? Just pop the back of all in one PC?

  Thank you

  According to the specification, this model supports up to 16 GB (2 x 8 GB), as follows:

  Dual channel memory architecture
  Two DDR3 SODIMM Sockets (204 PIN)
  Supports the PC3-12800 (DDR3-1600)
  Supports 1 GB, 2 GB, 4 GB and 8 GB DDR3 SODIMM

  Any brand or model of RAM memory that meets the following specifications should work on your computer. If you have 4 GB in a housing, you will need to remove it to install both 8 GB DIMMs. Yes, you just need to pop on the back.

  There should be two or more screws on the back that need to be turned counterclockwise until you hear each "click" of 5-6 times. Then, take a lower corner and lift the corner. Repeat with the other bottom corner. Now, lift the... starting back down. You may also need to remove a cap on the memory locations to access.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Pavilion Elite e9180t CTO D: Will Graphics card work with my desktop computer

  I have a HP Pavilion Elite e9180t CTO Desktop PC - AV321AV-ABA e9180t

  Windows 7 Ultimate 64-bit Service Pack 1

  Intel Core i7 CPU 975 3.33 GHz

  ATI Radeon HD 4850

  Motherboard: TRUCKEE 1.04

  System BIOS: 5.29

  To activate the ray-tracing on the GPU, Adobe After Effects requires a graphics NVIDIA and CUDA 5.0 or later approved.

  An NVIDIA representative recommended a GEFORCE GTX 780.  The PNY Graphics Card VCGGTX7803XPB video will work with my desk?

  Hi there @LeoOfMars
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that you are looking to find out if a video card is compatible with your information system. I'm happy to help you with that.

  The main reasons to be sure of are normally feeding you, special (to THE) cable power supply for the graphics card, on the motherboard compatible expansion slot, the drivers for your operating system, another thing to know is the physical size of the map, for moments of cases.

  Looking at the specs of your system and the motherboard by default, I listed the type of slot of power and expansion.

  HP Pavilion Elite e9180t Desktop PC product specifications and configurable Options

  Output power of power: 460 Watt

  HP and Compaq desktop PC - specifications of the motherboard, IPMTB-TK (Truckee)

  Two graphics PCI Express 2.0 x 16 (for graphics cards)

  Go to the video card you are looking at:

  GTX 780 3072 MB GDDR5 PCI-E 3.0 OC Custom cooled graphics card

  Input power: 1 x 8-pin auxiliary input aux input 1 x 6-pin
  Bus type: PCI-Express 3.0 16 x
  
  System requirements:
  Mother compatible PCI Express with a slot of chart double-width x 16
  Power 600W minimum (with a minimum of 12V current rating of 42A) 3
  300 MB of available disk space
  2 GB of memory system (4 GB or more recommended)
  Microsoft Windows 8, Windows 7, Windows Vista, or Windows XP Operating System (32 or 64-bit)
  DVD-ROM drive or Internet connection for installation
  DVI, HDMI, DisplayPort or VGA compatible monitor

  So on a quick inspection of both devices there are three problems, so this card will not work on your motherboard or with the current power.

  I hope this helps.

  1 x 8 pins, entry to aux in, 1 x 6-pin

• HP Pavilion dv7t Entertainment PC Memory Upgrade Question

  Product name: HP Pavilion dv7t-2000 CTO Entertainment Notebook PC

  PRODUCT # NB444AV

  OSOriginally installed: Windows Vista 64-bit Home Premium

  Currently installed OS: Windows 7 64-bit Home Premium

  When I bought the laptop, HP included a "FREE upgrade to 4 GB DDR2 memory (2 Dimm) 2 GB DDR2 memory (2 Dimm) system system'. I don't check then. Now, when it is slow, I checked the memory installed by 'Start-> computer-> (right click)-> properties-> installed memory (RAM). It shows that 2 GB.

  I'm baffled why it shows only 2 GB of RAM now, when HP was supposed to install 4 GB. In any case, I would like to upgrade memory now.  I have referred to as "HP Pavilion dv7 Entertainment PC. Maintenance and Service Guide "."  He describes the memory Module as:

  Spare part number description
  Memory 2048 MB (1-DIMM 667 MHz, PC2-6400),: 480382-001
  Module memory 1024 MB (1-DIMM 667 MHz, PC2-6400),: 480381-001
  Module of 512 MB memory (1-DIMM 667 MHz, PC2-6400),: 480380-001

  My question: can I use a 4 GB Kit (2GBx2) DDR2 800 MHz (PC2-6400) SODIMM 200 pin notebook Modules memory in the crack avialable? Memory at 800 MHz won't be compatible with 667 MHZ memory?

  I can't install module memory 2 x 4 GB to 8 GB? Will it be recognized by the card mother/BIOS/Windows?

  Thank you for your expert advice.

  You are the very welcome.

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01689926.PDF

  Please see Chapter 4, page 54.

  It seems to me that there are two memory slots (one almost on top of the other). Take a look at the illustration.

  This is why the memory in Chapter 1 specifications indicate that you can install up to 8 GB of memory (2 x 4 GB).

  You can install a single chip PC2-6400 4 GB and leave the one you have in there now.

  It comes to the module memory 4 GB good cheaper brand I could find.

  http://www.Newegg.com/product/product.aspx?item=N82E16820148288

• HP Pavilion DV6t 3200 CTO: HP DV6t 3200 CTO

  I wanted to upgrade the memory 6G to 16 G on my HP Pavilion DV6t 3200 CTO. What is the maximum memory it can handle?

  Can you please suggest the memory model and where to look for this?

  Thank you

  Hello

  From the #2 of its Maintenance and Service of Guidepage:

  Two SODIMM slots for customer-accessible/extendable
  Memory DDR3 PC3-10600 1333 MHz Double channel supports
  DDR3/1333 MHz and DDR3/1066 MHz (only computer models with Intel)
  CPU Core i7-840QM to 1.86 GHz, the Intel Core processor i7-820QM 1.73 GHz processor, the Intel Core i7-740QM 1.73 GHz processor and 1 .6GHz Intel Core i7-720QM processor with DDR3/1333 MHz; all other models of computer work to / DDR3 1066 MHz)
  Supports up to 8 GB of memory system in the following configurations:
  Total system memory to 1024 MB (1024 MB x 1)
  Total system memory of 2048 MB (1024 MB x 2, dual-channel)
  Total system memory of 2048 MB (2048 MB x 1)
  Total system memory of 3072 MB (1024 MB x 1 + 2048 MB x 1)
  Total system memory of 4096 MB (2048 MB x 2, dual-channel)
  System memory total 6144 MB (2048 MB x 1 + 4096 MB x 1)
  Total system memory of 8192 MB (4096 MB x 2, dual-channel)

  Source: http://support.hp.com/us-en/product/HP-Pavilion-dv6-Entertainment-Notebook-PC-series/4308480/model/5035739/manuals

  You can get 8 GB max, currently your machine has 6 GB, you can take the 2 GB module and buy a 4GB module (same as the existing one) for the 8GB total.

  The manual above shows more information on RAM, part # and how add/replace RAM

  Kind regards.

• Upgrading RAM for Pavilion dv6t - 3000 CTO Select Edition Entertainment Notebook

  Model Pavilion dv6t - 3000 CTO Select Edition, Prod #VXO69AV, Intel Core i5 - 450 M (2.4 GHz with 3 MB L3 Cache) with Turbo Boost up to 2.66 GHz, 160 GB Solid State Drive Flash Module, 1 GB ATI Mobility Radeon HD 5650 switchable graphics, Windows 7 Ultimate. I currently have the original 6 GB of ram that came on the HP laptop, which includes a stick of 4 GB and 2 GB key.

  I want to spend the maximum amount of ram and the ram for maximum performance (speed). Analysis of Crucial.com says I have 6 GB of ram and the maximum ram is 8 GB. He also says that I can buy one (or two) 4 GB DDR3 PC3-12800. CL = 11.    NON ECC unbuffered.     DDR3-1600.   1.35v. here is the link for the crucial scan and recommendations:

  http://www.crucial.com/ProductDisplay?displayCompatibleLogo=1&urlRequestType=base&catalogId=10151&PR...

  Here is a link below for my maintenance SE dv6t and Service Guide, with memory on page 70. The service guide references DDR3 PC3-10600 clocked at 1333 MHz.

  http://h10032.www1.HP.com/CTG/manual/c02657339.PDF

  Issues related to the:

  The Crucial scan seems to direct me to the memory of better and faster that is listed in the Service Guide. My laptop took advantage of this Crucial memory to operate at faster speeds than the memory, I have now? What latency (CL) cases? I saw sticks to new Egg with CL = 9 instead of this Crucial CL = 11. CL is important? What I have to buy two Crucial 4 GB sticks or I can I keep my original 4 GB stick and add a Crucial 4 GB stick for my 8GB? Is Crucial memory memory low density -something I've read elsewhere that I need? FWIW, a diagnostic analysis of Norton said that my current memory is syncing to 1067 ns.

  I have also these two links below for key USB PNY to a Best Buy nearby. The first stick of memory PNY seems to correspond to the Crucial memory card. Is - this low density memory PNY memory? And yet once, can I buy a single stick of 4 GB and add to my current 4 GB stick? This 4 GB PNY stick below which seems to fit the profile of Crucial scan is what I would buy if he tell you it's compatible, because I can buy it at a Best Buy near and easily return it if it does not work:

  http://www.BestBuy.com/site/PNY-1-x-4GB-DDR3-low-voltage-notebook-memory/5745153.p?ID=1219153729590&...

  And here is the link to a second best buy PNY 4 GB stick whose plug appear to be closest to the Service of Guide specifications, but this stick may not be low voltage and it has less maximum MHz:

  http://www.BestBuy.com/site/PNY-4GB-DDR3-SDRAM-memory-module/3779273.p?ID=1218431615147&skuId=377927...

  Thank you for your help and your recommendations!

  Hello.  I'll answer my own questions in the last post above.  Fortunately, HP expert Paul Tikanen resolved my questions in a thread with the following response.  Thank you, Mr. Tikkanen!

  "The faster the memory will run in your laptop is at 1066 Mhz, which is the speed of the FSB of the i5 - 450 M.

  processor.

  http://Ark.Intel.com/products/49022/Intel-Core-i5-450M-processor-3M-cache-2_40-GHz?q=%20i5-450M

  So, my recommendation would be for you to buy a module of memory 4 GB DDR3 PC3 - 10600 (1333 MHz).

  Thus, even the 1333 MHz chip will only work at 1066 MHz.

  I had a lot of success with this configuration of brand and the memory chip.

  Regardless of the brand you download, make sure he's 8 the little black chips of memory on each side of the Board, not 4.

  http://www.newegg.com/Product/Product.aspx?Item=N82E16820231341 ".

• HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  David_kata wrote:

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  Hello

  Both modules can be used. DDR3L means that memory using low voltage. Means that the modules produce less heat and last longer than DDR3 pure ones. I always use 1600 MHz CL9 DDR3 Corsair pure modules.

• Only LED blinking indicates problem of CPU on laptop HP Pavilion dv6z-1100 CTO. Can I reformat?

  HP Pavilion dv6z-1100 CTO Entertainment Notebook PC

  I was in the middle of an update and I think the power cord of the computer has been deleted. When it restarted, the headlights light up, the fan turns on, but the screen remains blank. I tried a hard reset. I took the memory card and reset in the slot. The flashing of LED code is 1, which indicates a problem with the CPU. I tried to start up and holding F8 or F10 but nothing happens. I also managed to lose my restore disk (if I had one). Can I have same reformt with a CPU error? What am I doing here?

  Thank you

  Paige

  The description you give sounds as if you were in the middle of an update of the BIOS.

  One of the strongest warning we give to members is forever off power when in the process of updating the BIOS.

  The reason is that a member who fails to Apay attention to warning learns they did a laptop cheap a lovely electronic device, plastic with the utility of the brick.  That's why's called it "bricking" your laptop.

  If this is the case, you will need to have the card system maintained by HP or a specialized repair company BIOS.

  Is your laptop still under warranty?

  If you see an error like this then you will not be able to do anything with the laptop until the corrupted BIOS file is resolved. So the answer to your question is no.

• A usb 3.0 card can be upgraded to the HP Pavilion Elite e9150t CTO desktop computer?

  I have a HP Pavilion Elite e9150t CTO Office, which has been upgraded to Win7 64-bit.  Could I move to the newer and faster usb 3.0 by purchasing and installing a card with usb ports?

  Hello

  Based on the following specifications, it has a few free PCIe connectors:

  http://support.HP.com/us-en/document/c01792852

  You can add a card PCIe USB 3.0 on your computer such as:

  http://www.eBay.com.au/BHP/USB-3-0-PCI-e-card

  Kind regards.

• HP Pavilion g6t-2000 CTO Notebook PC reclassification of i3 to i7

  Hello, I have a HP Pavilion g6t-2000 CTO Notebook PC with processor i3 - 2370M Intel (r) Core I want to upgrade to an i7.  Is this possible?  And if so, what processor do I get?  Thanks for any info in advance.

  Hi EHolmes:

  Thank you for your query... I'm please to provide this information.

  I'll send you a link to the Maintenance and Service Guide click here. If you click on the product description, left, under processors. on the right is a list of a compatible for your device.

  To answer your question directly, not an I7 is not compatible.

• Example: Pavilion dv7t-4100: recovery of hp pavilion dv7t-4100 cto

  Hey CV, where I can find or buy a software recovery and restore for my hp pavilion dv7t-4100 cto or is there any software available to download here restoration and recovery. ? Thank you...

  from the Philippines.

  NeoJohn wrote:
  

  Can I ask you... this disk of software can perform a full recovery of the system... ?

  Recovery Kit for Windows 7 64 b 631032-001 for HP Pavilion Entertainment PC portable model number dv7t-4100
  Operating system: Windows 7 64B + extra 2
  Number of disks: 2 DVD + 1 additional disk

  Did you ask them? Which looks like this but if you do not ask to be sure so we on the user forum can do for you.

• 2nd hard drive for HP Pavilion dv7t-4000 CTO Notebook - what do I need?

  Hi, I have the HP Pavilion dv7t-4000 CTO Select Edition Entertainment Notebook (product # WV703AV). It can accommodate two hard disks but only came with one. What would need to be able to install the second hard drive? I need just a connecting cable or I also need to caddy or kit?

  Also, would I get a solid state? My laptop that would support or should I just use regular?

  Currently, I am on Windows 7 64-bit. I have a 500 GB hd (which came to be partitioned with hp tools/restoration).

  Help with what I would need to a conventional hard drive or ssd would be greatly appreciated. I tried to look through messages of others first, but could not find anything specific to my model. Thanks for your time!

  Hello:

  The only place I know where you can get a 2nd hard drive kit is that provider.

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=345

  Your laptop should be able to work with an SSD, but I can't guarantee it.

  I don't really see any point in adding an SSD unless you make the main hard drive, and to do this, you must get an SSD of the same size as the original 500 GB hard drive to use the recovery discs to reinstall the operating system.

  Most people get smaller SSD and they use the W7 product key to activate a simple installation of W7.

  If you can read all 25 characters of your product key for windows 7, you can do your own installation media and allows to install Windows on a smaller than 500 GB SSD.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a 4 GB flash drive to use the USB compilation method.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

• Pavilion dv7t-6100-cto-quad: I can't get the new drivers on the hp support site

  I have restored my ssd from disks that I made the computer when I bought it and I did everything I know to do and can not get the hp support site to give me a list of drivers for that computer. I know there must be some updated drivers for the computer 3 years, but I don't know how to get them and it is interfiering with other programs or drivers that need updated drivers that I can't. Please help me with this. I learned that the site is in place and current, but it does not work as far as I can tell, for my portable quad, dv7t-6100 cto. Everything continues to run and never becomes pilots. Thanks for any help in getting this resolved.

  REO51ST

  is older than me - the site is always down.

  fishcrazy13

  Here is a workaround:

  Drivers HP Pavilion dv7t-6100 CTO Quad Edition Entertainment Notebook PC Windows 7 (64-bit)

  It's somewhat austere course - this isn't the site of HP, so you won't see the full Support pages of manuals, operating instructions and troubleshooting.

  I checked the other models - those I previously checked watch this site matches the drivers supplied by HP for the model and the version of the OS.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• HP Pavilion dv7t-7000 CTO Entertainment Notebook PC - Upgrade processor

  Hello

  Any help would be appreciated.

  I have a HP Pavilion dv7t-7000 CTO Entertainment Notebook PC.  Due to a new job, I need to update my processor of the current 2.30 GHz (see exact specifications below, please) of at least 3.0 GHz.

  Is there a processor 3.0 GHz there that is compatible with this particular computer? I called tech support and they told me they don't know. I don't know who else to ask.

  This computer was purchased just a few months ago (before I got the new job). I really don't buy a new computer, if possible, if I can upgrade the processor in it.

  Here are the current processor specifications:

  Intel Core i7 3610QM
  Codename Ivy Bridge
  RPGA Socket 988 B package
  The 22nm technology
  Specification Intel Core i7-3610QM CPU @ 2.30 GHz

  Thanks in advance.

  Well, it seems that one (that I found) 3.0 GHz processor that Intel made for my chipset (HM77 Express Chipset) and it's the Extreme edition i7-3940XM (http://ark.intel.com/products/71096/)

  Priced at $1,000 +, it looks like I'll be shopping for a new computer.

  Don't know if anyone from HP read the peer forums, however, I won't buy another HP product.

  This machine had problems outside of me needing to upgrade the processor for my own personal reasons. Your support is grossly lack in all areas even pull your techscannot model with the serial number.

  Visitors should not go out on the Internet for questions of research like this.