HP Pavilion running Vista system crashes then it said 'cannot find Windows.

Similar Questions

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• My Vista system crashes, blue screen on startup: irql_not_less_or_equal STOP: 0x0000000A (0 x 0, 00000002 00000001, 0x81AE8590)

  My Vista system was crushed, tried everything, but finally resorted to a recovery of the original factory image off the coast of the hard drive Partition. Everything seemed to go smooth but now I get a blue screen at startup: irql_not_less_or_equal STOP: 0x0000000A (0 x 0, 00000002 00000001, 0x81AE8590)

  Odd part is the system has two RAM slots, we have a 2 GB key and another has a 1 GB. Could not get the machine to start with two sticks in. Will start with a stick in each thin slot. Will not start no matter how they are installed if you are using the two RAM slots. Ran SFC/scannow. He found errors, that it cannot correct. How can I fix these errors?

  CBS log is large enough: what details should I post it to help you troubleshoot?

  Note: Were able to update the system, including the installation of updates Windows 128 and seems to be updated throughout the SP-2. I really don't want to run another recovery if possible.

  Thank you!

  Hello

  Perhaps you have different brands of RAM in your computer, and so it would not start with the two inserted Rams. Do a check for your specific PC memory that tells you what products work with your system.

  Follow the information in this article.
  Know what type of RAM you need

  In addition, updated BIOS.

  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If scan SFC did not fix the issue, I would say that you follow the steps in this article to fix it.

  http://support.Microsoft.com/kb/929833

  Regarding blue screen errors, follow the steps in this article that applies also for Vista.

  Resolve stop (blue screen) error in Windows 7

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I run Vista system restore; Msg says could not complete - "an unspecified error occurred during system restore.

  I tried to run the various restore points system restore.  Whenever the result is the same: msg says could not complete - "an unspecified error occurred during system restore.

  Try again in Safe Mode.

  What you are running for an anti-virus? If it's anything other than Microsoft Security Essentials, you may need to temporarily disable.

  If this does not work, you can run it in Mode safe mode with command prompt. Once the command window appears. type %systemroot%\system32\rstrui.exe and press ENTER. The system restore GUI will go up, and you can restore to the date / time selected, or select a time different everything such as running Windows.

  SC Tom

• XPS 8300 system crashes then stop - 3 beeps

  I need help.  Recently, my XPS 8300 crashes after about 1 minute after the system starts and stops it down and restarts automatically.  on restart I get nothing but 3 beeps and the power button is orange.

  Help, please.  Brian

  What happens when you press F2?

  Win 10, let's start with the PC off. Press the power button and press IMMEDIATELY on F2 (not him hold). The 'window' (no pun intended) to press F2 is very low because Win 10 starts the boot process very quickly.

  UNDER THE DIRECTION

• Vista system does not start after installation of windows update 10thFeb2010. Only start in safe mode. Windows Update does not open

  Updates to auto (windows Update) using.  Downloaded automatically update yesterday (10thFeb10) and when I shut my computer down it started to install them - as usuall.  However start my computer than this 11thFeb10 am and he began to run through regestry files when starting up.  Then it is impossible to load windows.  Just went to a blank screen.  Rebooted several times and were able to start it in safe mode.  Tried system restore but the same thing happens.  Obviously there was something to this update that 'changed' my computer and I'm not happy about it!  Also thought that there could be new updates (perhaps to fix the last update) but I can not even Windows Update to open it.  Tried online and he tells me that I have never downloaded updates and that none are available.

  I use Windows Ultimate x 86.  I hope someone can help me!

  Got a response from Ms.  Good all who have this problem - you have an ATI Radeon graphics card?  Driver is causing the conflict.  Uninstall all the stuff ATI goes on ATI web site and install the download of 'single driver '.  Reboot and then you can download and install other fancy programs that come with your graphics card.

• I am running vista and you want to go back to Windows XP. How to switch back?

  I bought a new hard drive. I installed vista. Which turns out to be is not very compatible with the rest of my equipment. I would like to go back to windows XP and get rid of vista completely. How do I do that?

  If you do not have your XP disc:

  Contact your computer manufacturer and ask them to send an XP Recovery disk.

  Normally, they do this for a cost of $ small.

  You are doing a new installation of XP, wiping the Vista operating system Partition from the hard disk containing Vista in the process.

  Follow the steps below in the link, to do a clean install; read the part where you remove the existing Vista Partition, create a new Partition, format, etc...

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp

  See you soon. Mick Murphy - Microsoft partner

• Connection cricket MSGM8 phone USB on my laptop (running Windows XP Pro) run the Add New Hardware Wizard, but cannot find drivers

  Original title: badminton MSGM8 phone to the USB port on my laptop to pis draft.exe

  connecting a phone to cricket MSGM8 USB on my laptop (running Windows XP Pro) run the Add New Hardware Wizard, trying to locate the software for Qualcomm CDMA Technologies MSM, but can not find the drivers, any fix?

  Hi ChristopherStout,

  (1) what is the complete error message you receive?

  (2) is limited only to Cricket MSGM8 phone?

  Method 1: Run the fixit available in the article below and then check if it makes a difference

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 2: If you provided drivers\software disc from the manufacturer of the computer, go ahead and install it.  You can see the steps outlined in the article below

  How to troubleshoot unknown devices listed in Device Manager in Windows XP
  http://support.Microsoft.com/kb/314464

• my iphone will not restore and then it says: cannot find iphone

  need help

  Make sure you have the latest version on itunes installed on your computer download itunes free www.itunes.com/download. Then see here... http:support.Apple.com/kb/HT1808. You may need to try this more then once. If you use windows-Temporarily disable your firewall or your antivirus software, and then try again. If you want more addition to this situation of www. http://support.Apple.com/en-us/HT201413.com

• HP Pavilion 1204ey g6: help to... Cannot find the quick launch buttons

  Impossible to find, place buttons to launch fast hp for my hp pavilion 1204ey g6

  Windows 7 64

  I don't understand. all the works of buttons, except the f2 and f3 display brightness.

  the program on the computer is not installed

  Hello:

  You must install the graphics driver so that the brightness function keys work.

  Graphics driver: installation and reboot.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103101-2&cc=us&DLC=en&LC=en&OS=4063&product=5197737&sw_lang=

  Software quick launch:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&DLC=en&LC=en&OS=4063&product=5197737&sw_lang=

• Cannot find windows vista product key

  It was preinstalled on my Emachines... but I swapped cases and no longer have the original case with the product key.

  Contact Emachines on it... the key you get from belarc advisor may be not the right key.  It might be the OEM SLP key that can only be used from the factory.

• my pc will not boot up when I run the disc to recover its says cannot find hard drive

  my pc won't start recovery disc tried tried

  Windows 7 disk but will not work it says can't find hard drive

  Sorry do not know all the details of my pc

  I am not basic pc user

  Thank you

  If you use your PC manufacturers recovery disks and don't see "no hard disk" the chances are that the hard drive has failed.

  When you try to boot your PC normally what exactly is the error message?

• I've upgraded to Vista XP, the system crashed and now it says to install the disc so that it can be fixed. He doesn't like XP or Vista disc. How to get a copy of the Vista disk (and not an upgrade) my computer can run.

  my vista system crashed and now it asks me for my vista drive.  He doesn't like my drive to upgrade to vista, says that my XP system drive does not work either.  where I kenza a copy of vista disc that works?

  To reinstall Vista:

  You can not legally do a clean install of Vista with a Vista Upgrade disk/license.

  Reinstall XP > then go to Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here's a startup repair disk, you can do:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner