HP Pavilion running Windows 8 will not install several programs

Similar Questions

• Windows Vista will not install a program without wanting a disc.

  I try to install a program on my laptop windows says to insert a disc that comes with it, but not everything has a disc so I say search online and it does not find anything. the only things I have problems with things like my Ipod, my external hard drive and my mouse, please help.

  For the iPod, you must download and install the iTunes software.  For other devices, you will need to find and download the drivers from the manufacturer - if the keyboard and mouse came from Logitech for example, download the drivers from Logitech.

  writing in the new message: * e-mail address is removed from the privacy... *

  I try to install a program on my laptop windows says to insert a disc that comes with it, but not everything has a disc so I say search online and it does not find anything. the only things I have problems with things like my Ipod, my external hard drive and my mouse, please help.

• Windows Update will not install, I get message 0.800700005.

  Windows Update will not install, I get message 0.800700005.  I'm not available updates when I shut down my computer and cannot access Internet Options in the Tools menu of WE.  Computer works well but no updates or the Option settings. Help

  Hello

  1 update you are trying to install?
  2. don't you make changes on the computer before the show?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Try the procedure described in the supplied knowledge base article and check.
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Method 3:
  You can try the steps and check if you are able to install the update.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

  SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-24 12:36

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1241
  Found 4 errors
  CBS MUM lack count: 4

  Unavailable repair files:
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

  Hello Yiratr,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  http://support.Microsoft.com/kb/956702

  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  "URGO".

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• my windows updates will not install error d 000737

  my windows updates will not install error d 000737

  Please visit: How to reset the Windows Update components? Carey Frisch

• Windows Update will not install downloaded updates.

  Win 7 pro x 64

  AVG AV worm: 9.0.869

  Zone Alarm Pro ver: 9.3.014.000

  Malwarebytes worm: 1.46

  SpyBot S & D worm: 1.6.2

  Ad-Aware Free (2010)

  This is my first post on this forum so excuse all the errors in the placement of the info.

  WU, MU will not install the updates downloaded or optional updates selected. No error code is given, it remains at 0% for as long I leave or I cancel installation. I tried to install individually in MS catalogue still will not be installed. This is a new computer that I built in July and punishment, it has not been used. It's strange because for the first three weeks of this computer, I had no problem with the installation of all available updates, or anything else. Then when the updates of August were available I chose all security updates and install optional updates that have already downloaded click on the button and nothing happened, it remained only on 0%. My question is, is there an update that was given earlier that caused these updates not installed? I really want to use my new computer, but I don't like to run without new security and the latest updates. I had trouble before what do.

  I used all the security software listed above on all my computers for about 5 to 10 years and non of them are set to prevent windows update from working.

  Please try another attempt to update, y d diddty. During the update installation fails again, close Windows Update.

  Open the WindowsUpdate.log and copy & paste in at least the last 50 lines or so, in your response, please.
  How to read the Windowsupdate.log file

  Meanwhile, suggest to configure Windows 7 to the clean boot and see if he can install updates in the clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: in the Clean boot state ZoneAlarm will be disabled. Make sure that the native Win 7 firewall is now on in the Panel.

  While in the clean boot state, you can also try to download and Save the Fixit found here -How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Now launch Microsoft Fixit 50202.msi and choose the default mode.
  When it has finished turn the system reboot to clean it from same start State and see if updates can install now.

  If no joy, run the Fixit once more and choose aggressive mode.
  Then restart on the same State of clean boot and see if update succeeds now.

  Expert MowGreen Windows IT Pro - consumer safety

• Pavilion dv6 - 6153cl laptop - will not install the video drivers.

  Recently, a friends Pavillion dv6 - 6153cl laptop started bluescreens frequent (many x 50 on igdpmd64.sys).   (on Win7 64 bit, completely up to date)

  I came across this site and downloaded the current drivers but try as I can, they will not install. The message implies that they are bad drivers, but I have confirmed that they are the 2 parters - driver package AMD, including ATI and Intel drivers for the video "switchable". Most of the AMD install - except the 2 pilots and the C++ package components. AMD checks prior approval from hardware to install and does not renounce it.

  The error is:

  "this computer does not meet the minimum requirements for installing this software.
  or it just keeps trying to install it until it skips this step and goes to the next component, which gives the error the failure at the end.

  I searched this site and found a number of references to similar problems. I've updated the BIOS, all other drivers, removed the old drivers (it is now running on Win VGA drivers), updated part of HP software, run a repair on Windows update and Installer, tried the previous version available, uninstalled C++, cancelled prior unpacking, checked Mode drivers safe, ran HP Support Assistant and tried to manually launch the installation program in compatibility mode admin.

  Windows Update also wanted to update the 2 drivers but who do not. Twice. He will probably try again.

  I ran sfc and Auditor - alls well with the other drivers.

  There is no obvious change that percipitated the question.

  The WinUpdate KB2670838 that sometimes causes a similar error has not been installed.

  The system works at normal temperatures. And it stopped crashing. But only 600 x screen resolution.

  Any suggestions on how to get the drivers to install?

  My friend decided to hold the laptop store as they needed more functional. Of course, they were able to update the video drivers well obviously had a problem with an obscure audio problem. (audio drivers have been included in the package of video driver HP that they perhaps do not use) All is now well and unfortunately I cannot report on what drivers, they used to solve the problem. Thanks for your help, Zak

• Office 2007 SP2 on Windows 7 will not install

  Recently upgraded from Vista to Windows 7. After that, a lot of problems to do Office 2003 and 2007 to play nice. Finish by uninstalling and reinstalling both. Now, applications seem to be happy, except for Word 2003 AND 2007, eager to relocate whenever they are launched. The biggest problem now is that the Office SP2 will not install. Tried registry cleaning, download .exe standalone and as an administrator and also using the tool PatchRegCleanup - x 86 .exe (which gives me a message "productcode must be determined" and makes me want to go out). Yes, Office 2007 disk is inserted. All other updates installed correctly.  Any help appreciated.

  It worked for me: http://support.microsoft.com/kb/971058. Thanks SpiritX and t. guenoun

• Brand new Aspire XC - 603G (ACX - 603 G-UW31). Windows 7 will not install in Legacy Mode

  Hello

  I am trying to configure a newly purchased office of Acer (Aspire ACX - 603 G-UW31), who has installed Windows 8.1, for my mother who cannot grasp the steep learning curve of Windows 7 to Windows 8.

  I have a licensed copy of Windows 7 x 64 on DVD, and even after the SecureBoot mode off then launch MSC forever and then starting with F12, by selecting the DVD drive as a boot device, Windows will not install correctly.

  The very first steps of the configuration are very well, it is, I'm asking the press actually starts to any key to boot from the DVD, Windows Setup loads some files, but the problem comes when the installation of Windows. I get a STOP error to the ASF with the message "The BIOS in this system is not fully complaint ACPI." There is no BIOS update for this model. That's the traditional way...

  Any ideas?

  Thank you, Nick

  

  All,

  I would like to announce, we have released an update of the BIOS that supports the element of 'Throw the CSM' in the BIOS Setup menu. Please visit http://www.acer.com/worldwide/ -> select your region-> click Support-> drivers and manuals-> select your product and then download the version of BIOS released on 15/09/2014 (or later version).

  Please be aware due to material limitations when MCS-mode you may experience some audio issues HDMI.

• Windows 7 will not install PNY 1 GB flash drive. (who has worked in the past)

  When I tried to use my flash drives today that they do not work.  When I go to Device Manager it says the driver is not digitally signed. (It's the Microsoft supplied driver). I tried the update and find a driver who says that it is digitally signed, but when I try to update it will not install because it is not digitally signed.  Help!

  Hello

  1 what other readers USB not detected on the computer?
  2. don't you make changes to the computer before the show?

  Method 1: I suggest you try the steps from the following link:

  Tips for solving problems with USB devices (applies to Windows 7)
  http://Windows.Microsoft.com/en-HK/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Also I suggest you to update the chipset drivers.
  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Pavilion dv6-1350us Entertainm: Pavilion dv6-1350 us running Windows 7 will not be closed

  Have not used my laptop for the last 45 days and have not installed anything new. W7, 64-bit running. Just used on these days and it will not be closed. When I stopped it just hangs and displays that says: "if it please do not turn off or unplug your machine. Installation of update 1 of 1 ". This can last for hours.

  I stop it manually with the power button which of course translates message when I start again that «Windows did not close properly»

  I thought that since I had not used the computer laptop or literally turned on for about 45 days, that maybe I was missing a few important Windows updates, but when I go to Windows update via Control Panel and click on Windows Update to search for updates, it "just hangs" it thus, showing never updates available. Last update of the W installed was 26/03/16 and laptop worked OK.

  Any ideas?

  I downloaded ccleaner pro (first edition) and scanned the hard drive. I checked 'fix all issues' and it worked! Whatever files or conflicts on the register or wherever was causing the 'hang up' were eliminated obviously that my laptop was able to stop. :-)

• Update of Windows 8 will not install updates pending.

  When troubleshooting windows8 update I received this message:

  This applies to the error codes:

  WindowsUpdate_8024a000

  • 0x8024a000

  My problem is twofold - 1) waiting for updates will not be installed. (2) I sometimes get a message re being on a connection counter culminating in the W8 update not to continue with the process.

  I tried the process of troubleshooting as a user, and then as a Director, sometimes that translates an off "one" solution However, the next time I try I have the same problem all over again.  Can you help me please?

  Click Start
  Type: cmd
  Right-click on cmd in the start menu and select "Run as Administrator"
  Type: net stop wuauserv
  Press enter
  Type: ren c:\windows\SoftwareDistribution softwaredistribution.old
  Press enter
  Type: net start wuauserv
  Press enter
  Type: exit
  Press enter

  `~`

  The current time and the date now in Baja California, Mexico

  18:13
  Friday, May 24, 2013
  DST - 0700 UTC
   
  UTC/GMT is 01:13 on Saturday, may 25, 2013
              
  Current weather conditions in San Felipe

  Sunny67 ° F / 19 ° C

• Windows Vista will not install updates.

  I came across Best Buy, bought the first thing I have seen & to the left. It's just the small things. My main PC is myPC music recording studio (never online) so for my this, that I bought... I don't care.

  a m9402f 7.00 GB 64-bit system quad-core 2.30 Ghz procesor.  On the 626 GB on the 'C' drive, I only used GB 129.  I don't know why I've bothered w/a Seagate external extreem HD 1000GO?  Works great, I've never used one before Vista but works very well.

  Thus, recent updates do not keep install .  What's up with the updates? What is happening with this? Should I just go buy Windows 7?  I spend hours looking for solutions and never ask for help, but this time I am so tired so I'm going to ask.  Below are updates that keep a failure... Notice they're on SP2 * and IE8. My PC alread had installed SP2.  I tried an update for this.  I have switch from IE 7 to 8. I don't see any other reasons.

  Maybe I'm missing something?

  Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB982381)

  Cumulative update for Media Center for Windows Vista for x 64-based systems (KB982480)

  Microsoft .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 Security Update for x 64-based Systems (KB979910)

  Microsoft .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 update for x 64 systems (KB982525)

  Microsoft .NET Framework 3.5 SP1, Windows Vista SP2 and Windows Server 2008 SP2 update for x 64 systems (KB982536)

  Microsoft .NET Framework 4 Client Profile for Windows Vista x 64-based Systems (KB982670)

  Update security for Windows Vista for x 64-based systems (KB978542)

  Update security for Windows Vista for x 64-based systems (KB979482)

  Update security for Windows Vista for x 64-based systems (KB979559)

  Update security for Windows Vista for x 64-based systems (KB980218)

  Update to the list of compatibility view Internet Explorer 8 for Windows Vista for x 64-based systems (KB982632)

  Update for Windows Mail Junk e-mail filter for x 64 systems [July 2010] (KB905866)

  Update for Windows Vista for x 64-based systems (KB981793)

  Update for Windows Vista for x 64-based systems (KB982519)

  A LOT of these updats were on UPDATE SP2 which was on my computer when I bought it, but they do not work...

  Others have to do with the "compatibility issues" for 32-bit web sites.

  .. and yes my stuff Adobe, Flash and Java are all kept up-to-date too.  Please keep in mind, I know how to get to these files support and update history and try to update manually and with each of them, the research questions and check forums, so I spend a lot of time doing this.  A lot of information is not new.

  Speaking of a new VISTA user...  My C drive has a file that says "Program Files (x 86) and this is where I go for all.»  What is it? It was my first VISTA computer. So forgive me... I'll tell you something about the music industry, but forgive me this ignorance.   Other folders have programs in the files of "program" and identical named files... What is so special about this (X 86)... I'm in 64-bit and sometimes still in 32 bit? capacity?

  My computer is compatible for Windows 7... should I go and buy and put an end to this? I could put it apart for just photo software stuff... Let me see it done 7 computers in the House.  sheeesh! Thank you... it's me now to lock up.

  "Talk of a new VISTA user...".  My C drive has a file that says "Program Files (x 86) and this is where I go for all.»  What is it? It was my first VISTA computer. So forgive me... I'll tell you something about the music industry, but forgive me this ignorance.   Other folders have programs in the files of "program" and identical named files... What is so special about this (X 86)... I'm in 64-bit and sometimes still in 32 bit? capacity? »

  Hello, I run the servers at my work, and systems are 64-bit.  It would be just that sometimes your system needs to do things differently running 32-bit.  Not sure why they choose to divide them, but that's how it is on my servers.

• An update of windows 7 will not install my system hair upward

  I have a Dell Studio 1555.  everything was fine until the update for daylight saving time.   It downloaded, but I can't install it.  My system has just tried to install it forever. I can get out of the installation without end by closing and removing the battery, but it will happen when I try to quit again.   I changed installation mys to ask aboiut installs but I see no way to remove the file that is there and Windows always try to install again.

  any thoughts?

  What he says is that these updates of advanced savings are honestly not necessary for 99.9999999999999999% of humanity.

  You can hide without any problems in the long term.

• Windows Update will not install KB2833941. Says: error 0 x 643

  XP-3 running.  My update and all items have been uploaded, but KB2833941 will not be installed.  Tried several times.  Tried the solutions all available, including Mr. Fixit.

  I have 1 remaining Windoz computer and my solution to this problem is just to skip the installation.

  I love these problems that take hours to solve - Bill Gates and Microsoft settle a product buggy and people just keep buying it.

  It reminds me why I converted the personal activities of Macs 18 months ago and save over $1,500 a month in costs of tech (haven't needed constant visits IT people) and the constant maintenance (5 minutes per week on each Mac) and 15 minutes at the end of the month.