HP Pavilion Slimline s3760in D: need help in Clean install Windows 10 pro 64-bit?

Similar Questions

• HP Pavilion Slimline s5 - 1140d: need help with relocation to Windows 7 from Windows 10 Technical Preview

  Hello. I am currently using a Windows 10 Technical Preview in my office and want to install the official version of Windows 10. However, Microsoft has answered me, in order to install the FREE Windows Home 10 fresh new official retail version, I have to go back to the previous version which is Windows 7 then updated via windows update. I tried to check with HP Recovery Manager, but there is no option to return to windows 7. Only it has option to reset the tech 10 preview windows. So I went to the Microsoft website to download the ISO of Windows 7 files to install in flash player, it asks for the product key. And then I entered the key correctly which is stuck on my Windows product key sticker desktop. But he didn't and the message that this is a key of the OS preinstalled, contact your manufacturer. Now, I'm stuck with how to return to Windows 7! I need help ASAP! Thank you. I did backup and everything so much already.

  Yes, M$ makes it seem as if the OEM product key will work, but it does not work. There are choices and it depends on how you wish to just to proceed.

  As the model number is not included in the post, it is only a general Council, here.  You can make one of these to restore Windows 7 to useful step.

  (1) reinstall Windows from the recovery disks set - if you do not, order of HP for a low price ~ $ 25 - $30 US

  (2) check if the recovery Partition (usually D :) there is and run recovery from that)

  3) reinstall using Winows 7 retail disc and allows to activate the COA key

  (4) buy 10 Windows and install

• HP Pavilion 23 AiO need USB 3 Driver for Windows 7 Pro 64-bit

  Hello

  I need driver USB for HP Pavilion 23 AiO for Windows 7 64 bit. I tried to install the chipset and USB drivers on the HP driver Web site, but he says that I don't have perfectly meets the requirements for installation?

  Hardware ID

  PCI\VEN_1022 & DEV_7812 & SUBSYS_2AEE103C & REV_03
  PCI\VEN_1022 & DEV_7812 & SUBSYS_2AEE103C
  PCI\VEN_1022 & DEV_7812 & CC_0C0330
  PCI\VEN_1022 & DEV_7812 & CC_0C03

  OK, so I'm done fixing this problem. Because there, anyone having the same problem as me, here is how I did it.

  Assuming that you are trying to install the USB 3 on Windows 7 64 bit drivers...

  1. go here and download the Original Texas Instruments USB controller driver

  2. before executing the downloaded file (sp57875.exe), click on Start/Run then type folder and press ENTER.

  3. run the executable file (sp57875.exe). You will notice the content excerpt in the TEMP directory % opened in a randomly named folder.

  4 copy the entire folder on your desktop and then cancel the rest of the installation.

  5. go into your configuration/system control panel and Device Manager/security

  6. right click on the USB controller in Device Manager and click on Update driver software...

  7. click Browse my computer for driver software

  8 go to the desktop where you put the TEMP folder and select the src directory

  This should do the trick. I had to repeat 6,7,8 for all USB drivers that were not installed correctly. You can get a uknown device show up once you apply the first installation, just repeat steps 7,8,9 on the unknown device and it will install the USB 3.0 hub.

  I hope this helps.

• Need help aligning the SSD to install Windows XP Pro (32 bit)

  OK, I scoured the internet for help on this one - I'm a newbie to SSD - so having to manually align the partitions and find FITTINGS utilities to take care of the "Crusher" is all new to me - so the answers I found on the net were to "over my head" for my last neuron remaining cope!

  The machine is an Asus Eee PC 901/XP - that belongs to a friend of mine. These netbooks have 1 x 4 GB SSD and 1 x 8 GB SSD - I installed XP Pro SP3 on the 8 GB and got to boot from it - only problem is not only slow, but essentially unusable in this same open my computer with no other progs running takes a good 30-45 seconds - and actually run the progs just cripple it.

  After checking the CPU in Tsk Mgr was sod all, that there is plenty of available RAM (I upgraded to 2 GB = max mobo aura), I can only imagine that - now that I've done some reading on these SSDS - the (main?) cause of the non-existent performance is the fact that I have (in my ignorance) doesn't have to align the partitions before installing the operating system.

  I got a 8 GB disk image - using a prog called 'Snapshot' - as I read it, I should be able to then use this image to replace the disk of 8 once I have the aligned partition (this image is now on the 4 GB drive), without messing up alignment - so no doubt I need to align the 4 GB drive as well.

  So, after all that waffle that I would be really happy is a walk of models by using Diskpar (if someone can point me to a working bind it to d/l 1!) -or Diskpart, which I think I can run from my recovery disc of Win7 (from my Dell laptop) - I know that I've seen people talk about running it from a Vista recovery disk, so guess it of the same tool and can help me to do the same job.

  I think I need to remove the volume (?) on the 8 GB, before I can do any alignment - then, as it is currently the only player with a job o/s on this subject, is it possible by booting from the recovery disc too?

  Just for the record the Tech Support Asus was desperate - also, their support for the "Eee" family forum have been down for weeks - then were not able to ask people who have probably all done on this machine!

  Thank you

  Jon

  Hello

  Unfortunately, this is not supported in computer ASUS; You should continue to contact ASUS for support.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

• Need help, can't activate Windows 8 Pro on HP 3125

  I got a netbook HP 3125 which has an AMD E2 APU, 4 GB ram, 320 HARD and Windows 8 Pro disc and would use for about a month and well. Recently, I decided to update my ram and anything by doing this, I also decided to upgrade to an SSD HARD drive.

  I changed the HARD drive out and installed the SSD, but the BIOS doesn't detect so I disabled the Secure Boot, boot enable Legacy and then proceed to installing a custom installation of Windows 8 Pro using a USB key.

  After installation, it asked me a product key, which I find it weird because Windows 8 does not come with product key labels, since it is built into the bios.

  My problem is, how do I activate my Windows 8 Pro, when it keeps asking me for a product key that I don't have?

  Also, I noticed in the BIOS, it is sometimes called 'Key to load HP factory default', but I can only do this when secure startup is enabled.

  Embedded product key Windows 8 has something to do with the secure boot, for example, if the Secure Boot is disabled, then Windows 8 will not activate?

  Thank you

  Woot! I got it to work!

  Secure boot has nothing to do with the activation of Windows 8 or not with the COA embedded (product key) which is in the bios.

  Here's what I did, just note that this method may not be appropriate measures, but it still works. And different systems configurations, may require different or additional measures. Also, this method may or may not work with all systems.

  for example, the brand or the system you may or may not work with the steps posted in this thread.

  If you have a Windows 8 with a product key that is located on a sticky label, this does not apply to you. It's only for those who have purchased a brand name with Windows 8 system, and it does not come with a sticker product key.

  Components used in this tutorial

  -3125 Netbook HP: AMD E2/6 GB/Intel of the Commission 330 120 GB SSD/F27 bios (later at the time of this tutorial)

  -Microsoft Windows 8 Professional 64-bit (original) disc

  -SATA to USB 3.0 adapter

  -Lite-ON SATA DVD Writer

  1. turn on the system and press F10 to go into the Bios

  2. in the bios, go to trial system > Boot Options

  3. go to Secure Boot and disable it

  4. Select clear all Secure Boot key and enter the 4-digit confirmation code

  5. then go to support HP Factory Default Keys, select it and press Yes

  6. save the Bios and output

  7. Press F10 and return in the Bios

  8. go to the System Configuration > Start Options

  9. select Legacy Support and activate it. A warning message appears, saying that this may cause the operating system to boot, just ignore it and press Yes.

  Now you should see the following text:

  Legacy support = on and key = registered platform

  10 save the Bios and output

  11 insert the disc of Windows 8 for the DVD player and release the boot drive order by pressing F9

  12. the driver, select start from the EFI file and press on enter

  A window opens, showing the HDD/SSD and DVD player with a unique code next to each hardware device

  13. Select EFI sector DVD and press ENTER.

  14. then select , , Bootx64.EFI. After that it will be white and then asked at the start of the DVD.

  15. Press any key to boot from the DVD. If it's done correctly, you will see a HP start-up logo

  16. once the DVD has finished initializing, will appear on the screen of configuration of Windows 8. Click next

  17. accept the EULA and then select custom installation

  18. create a new partition on the disk that you want to install the operating system.

  Note: Windows will create 3 additional partitions, as well as for the installation of the OS. What makes the drive as GPT.

  19 install Windows 8

  20. after the installation and customization of personal settings. Go to control panel > system and you will see

  Windows 8 is activated.

  You can either enable or disable Secure Boot in the bios, as it has no effect on the question of whether or not the operating system will boot. I tried the two enable Secure Boot and disabled, the two parameters allows me the startup of the operating system.

  As Intel 330 SSD, I got two of them and both have no problem running Windows 7 or Windows 8.

  ACHI is necessary if you want to enable TRIM that optimized the SSD automatically when you have to.

  If the TRIM does not work, then it must rely on a Garbage Collection.

  To turn off the SSD on Windows 7, schedule defrag because this will reduce the life expectancy of the SSD

  Windows 8 should because it will recognize if it of a SSD or not. If this is the case, then it will send the TRIM command.

• I need help to connect my windows 7 pro PC to a windows 2008 Server...

   
  Two points of connection here.
  Server: Windows Server 2008
  Client: Windows 7 Pro Edition.
  Client used to connect to the server so that the server was located on the customer network drives. They are connected to the same hub via ethernet and wifi (PC has to a connection wifi and ethernet to same hub).
  Customer will not see the server on network
  Server does not see the Client subnet.

  Try this:

  Navigate to the following location:
  Control Panel\All Control Panel Items\Network and sharing Center\Advanced sharing settings
  
  Select the options as shown in the image above, then click on save changes. Try this in Server computers and client.
  If the problem persists, answer here.

• Caps/Num/Scroll indicator for HP Pavilion Slimline s3760in desktop PC

  Hello

  I have a desktop HP Pavilion Slimline s3760in reference: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=zh-hans&lang=zh-hans&lc=en&product=3831143&

  My PC came with the mouse and keyboard hp wireless. Caps/Num/Scroll the taskbar witness came were there under vista.

  Recently I did a clean install of windows 7, so I need indicator caps/num/scroll in windows 7.

  It is very difficult because there is no indicator in hp wireless keyboard.

  So can someone provide the link to download.

  It should be compatible with my model.

  Finally I found the solution to my post.   

  I use this brand new HP screen Cap/Num/Scroll Lock Indicator (Vista 32-bit and 64-bit) and Windows 7 32 - bit and 64 - bit and it works fine.

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45986.exe

  TITLE: HP Desktop (OSD) on-screen keyboard software to display
  
  VERSION: 1.0.0.702 Rev.
  DESCRIPTION:
  This package provides the applet HP Desktop keyboard on-screen Display (OSD) for the supported desktop models and operating systems.
  
  This applet shows if the CAP/NUM/Scroll locks are enabled or are not enabled.
  
  PURPOSE: Routine
  SOFTPAQ NUMBER: SP45986
  ENTRY INTO force: 9 November 2009
  CATEGORY: Driver - keyboard, mouse and input devices
  SSM supported: No.
  
  IMPROVEMENTS:
  -Provides the initial version of this software.

  Please click the White Star Kudos to say thank you for helping.

• Pavilion slimline s3760in: usb ports and the Internet connection

  Hello

  I use my hp pavilion slimline s3760in pc for about five years. Recently my hard drive failed and I had to replace.

  Everything was going well until my pc stopped recognizing all the same usb ports in BIOS mode on many occasions (he only recognized usb keyboard sometimes). Finally I have reset factory. The Usb ports now generally work fine, but now when I connect to the internet, none of my browsers can disply any page, even other programs cannot connect to the internet, although it shows that I am connected to the internet.

  Is it a hardware problem or just windows?

  Hello again @vr46,

  Thank you for the updated information. I'm you provide a HP support document: Broadband Internet Connection to a dispute (Windows Vista), which has the troubleshooting steps you need to solve the problem you are now facing. I suggest that you take the time to go on the document and apply the suggested steps.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a wonderful day!

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• HP dm4-1165dx, I recently installed windows 7 pro. my wifi button stays amber now? Need help.

  I recently installed Windows 7 Pro on my HP dm4-1165dx.  Now, I can't my wi - fi to work?  Amber light stays?  Please, I need help.

  That worked very well.  Thank you very much.

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I need help to re install my master collection on my macbook

  I need help to re install my master collection on my macbook

  Hello

  Please mention which version of the Master Collection, you want to install.

  CS5 and CS6 CS5.5.

  You can always access the following link to download the installation for the CS6 Master Collection files and click on the respective versions at the top left to get the other required installation programs.

  Download Creative Suite 6 applications

  Thank you

• Need help downloading. Downloaded Windows 10, I went back to windows 8 and my adobe acrobat disappeared.

  Need help downloading. Downloaded Windows 10, I went back to windows 8 and my adobe acrobat disappeared.

  kglad links in response #1 here https://forums.adobe.com/thread/1930162

• need help to activate Adobe Acrobat XI PRO for WINDOWS?

  need help to activate Adobe Acrobat XI PRO for WINDOWS?

  Hi jurleana15722686,

  Work with a subscription or perpetual version (where you bought the software outright)? Are you faced with a particular problem or receive an error message when you try to activate?

  To start, please consult this document: https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

  If you're still having problems, please let us know what is exactly the problem, including the error messages that you receive. It would also be useful to know what version of Windows you are using.

  Best,

  Sara

  [moved to download, installation, commissioning of disucssion forum]

• need help downloading cs5 in windows 8

  need help downloading cs5 in windows 8

  It does not show the icon to start the program after downloading different parts...

  Adobe products generally do not require a unpackager like winzip and are usually self-extracting.

  Try the click with the right button on the exe and then clicking "Run as Administrator".

  If this fails, fix this screenshot: http://forums.adobe.com/message/4209263#4209263