HP pavilion slimline s5-1114 (win7) Long loading time

Similar Questions

• How to remove power on password on hp pavilion slimline s5-1114

  How to remove power on password on hp pavilion slimline s5-1114

  Hello

  See the subheading "Compensation password settings", on the following link.

  http://support.HP.com/us-en/document/c02980014

  Kind regards

  DP - K

• I can't open all the Web sites in firefox(version 25), its long loading time, help please

  I can't open all the Web sites in firefox(version 25), its long loading time, help please

  Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox: solve connection problems to websites after Firefox update

• Long loading times, XPguest - opensuse 11.1 host

  Ref: workstation 6.5.1

  openSUSE 11.1

  After compiling the modules using the tip of raid3868

  (mv/usr/lib/vmware/modules/binary/usr/lib/vmware/modules/binary_old)

  This is the behavior of VMware

  1. If I load a VM with opensuse 11 (it's just one of the guests I have available) it loads and runs like when I was with opensuse 11 as host. So in my opinion works well

  2. I have that I load a VM with XP, the initial screen of XP is fast and then takes a long time until the final screen comes and XP loads, as if XP is looking for drivers etc.

  After it loads, it works as before (way OK).

  Time of loading for XP using opensuse 11 = 43.5 sec

  Loading time for XP using opensuse 11.1 = 5 min 20 sec.

  What is the best way to open a session to the events I have described? I tried to start mode full screen and the whole system froze and the VM doesn't work anymore, so I had to make a new. I'll try again.

  I'm sure it's a problem with the kernel, and it may also appear in fedora 10 etc. I am interesting to solve because is the only thing now is can't me upgrade to opensuse 11.1

  Happy new year!

  Terry =-

  Post the vmware.log file and the file .vmx since the directory containing your comments.

• HP Pavilion Slimline s5-1114 D: drivers missing

  Miss me the following drivers for my s5 - 1114D running Windows 7 (64-bit):

  PCI Simple Communications controller
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_2AC2103C & REV_04

  SM Bus controller
  PCI\VEN_8086 & DEV_1C22 & SUBSYS_2AC2103C & REV_05

  Can someone give me a link to download?

  Very much appreciated.

  You are the very welcome.

  If the smbus and pci simple comms, the controllers are more identified as such, the drivers installed correctly.

• KB2572073, KB2518864, KB2633880, like all the others below, updates of each start, long loading times, success of Microsoft log shows 5 full loads,

  Simply, downloads, 5 times in my case exceeded the meter MS Updates to and somewhere other than my system. Whenever I start the same updates are available. FixIt questions do not address it directly at all, KB2572073, KB2518864, KB2633880 are updates of the problem SP2 and SP3 FIXIT has no ability to cover this because there is not a specific query on exactly that.

  Choose one or two-online http://answers.microsoft.com/en-us/Search/Search?SearchTerm=KB2572073+KB2633880+KB2518864&CurrentScope.ForumName=Windows&CurrentScope.Filter=windows_xp-windows_update&askingquestion=false

  Tip: See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• Start-up/loading time

  Hi y ' All

  I was wondering if anyone else knows long loading times? Even after upgrading my machine from 512 KB memory to 2 GB of memory, I'm experiency periods white screens or console pop up indicating the time Frame starts. It seems to matter what file or type of file I load. The affected computer is a company pc, maintained by one of my colleagues and fully guaranteed, with the exception of some framemaker files. In any case, what I "m trying to ask is; is this normal this framework takes up to several minutes to load some files?

  In FM9, if your last workspace has the pods open (bottom), then FM must fill all cross-references, markers, variables, inlays, etc.. It takes a lot of time and resources. In a database editing work, where there could be thousands of variables and markers, this may be slow exrcutiatingly (minutes to tens of minutes).

  However, if you create a workspace that has no open pods and set this as a default, then FM light pretty quickly. If you have a lot of graphics, then move the document can be slow, so switch off the graphical view (esc v v), is the speed of things much up. When you get to where you want to be, Press esc v v to toggle the graphics on.

• Pavilion Slimline s5-1000z: driver Ethernet missing on s5-100z Pavilion Slimline with Win7 Ultimate

  Hi all

  I installed Windows 7 Ultimate SP1 on my daughters computer and everything works well except that when I try to connect to the router says the Ethernet driver is missing. When I Check Device Manager it shoes the Ethernet controller driver is missing. I tried everyway I know to find the driver, but so far nothing.

  I have worked with many computers over the years and a Tech with MS beta-tester for more than 15 years and I've never met such a problem before. I have the same Windows operating system installed on my HP Pavilion Slimline s5-1205z and had no problem.

  I changed cables ethernet 4 times thinking it could be the cable, but so far nothing solves the problem.

  I'm hoping someone here can help me find the driver for the s5-1000z so that we my daughter computer connected to the router. Any suggestion or help will be greatly appreciated.  She needs the computer upward and are working on Internet before school starts so that it can make its online courses.

  Thank you. :-)

  Hello:

  The card mother sheet for this model indicates that it has embedded technology from Realtek: chip Ethernet RTL8105E-VC.

  The second driver in the list on the link below should work.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• HP Pavilion Slimline s5304y strange behavior and stops randomly

  To start, here is my card:

  HP Pavilion Slimline s5304y

  Windows 7 Home Premium 64 - bit SP1 Build 7601

  AMD Athlon II X processor 2 215

  4 GB of RAM, blah blah blah

  Here are the symptoms:

  -Win7 starts to act strangely, when the keys are depressed they'll keep recording (like that, but forever)

  -Then it will attempt to force the closure but I keep open Word 2007, which will block the closure and I gives me the option to cancel or to force stop word.

  -J' I usually Cancel to see what it does, sometimes it continues to operate normally, sometimes, attempts to stop become more frequent until it ask no more, and Word cannot veto the shutdown request.

  -When I look at the Event Viewer system, he says he is told what USER (me) has launched the stop, as if it were normal.

  -A little more digging in the event viewer application section says that before stopping, "HP Support Assistant Service" had a "PowerEvent handled successfully by the service" with EventRecordID of 10883.

  -Meet system Event ID 109

  Microsoft-Windows-Kernel-Power

  EventRecordID 45150

  -Meet

  "The process C:\Windows\System32\winlogon.exe (USER) has launched the power off computer USER for the user NT AUTHORITY\SYSTEM account for the following reason: no title for this reason could be found.

  Reason code: 0x500ff

  Type of closure: power off

  EventID: 1074

  [Qualification] 32768

  There is no indication that something went WRONG minidump, no discharges of any sort, sfc/scannow ran own just like chkdsk, memtest, tester of windows 7 and all other diagnostic tools.

  He did it before, but very rarely, so I thought nothing of it (which happened in the spans of the months apart) but now happened several times a day.

  Recent software additions:

  Installing the software and drivers Lexmark Prospect Pro205

  -Updated Nvidia graphics drivers Geforce 6150SE nForce 430 to 8.17.12.9573 and it's Helper service ver 295,73

  What I did to try to rectify the situation:

  -Scanned with each virus/malware free scan in existence - deleted an infected file from Java Java/CVE-2011-3544. O operate. And another unrelated to the advertising program.

  -Updated HP Assistant and Advisor

  -Updated several times with various updates for windows 7

  -Clean the case thought it was overheating, but nope - clean as a whistle, normal running time

  -Good fans checked

  -Extract from food - looked good, constant voltage

  I haven't checked the power extension cables. I heard there is a problem with shorting out on the 24-pin extensions, but I didn't have an extension of 24 pins on the power cables.

  I've heard others have had problems with HP stopping randomly with a strange behavior, so I wanted to see what you guys have to say.

  Could this be problems of power with my house? The wiring is old... Or more likely is a short circuit in the cable/PSU?

  How can I easily repair/test of this theory?

  -All right, so the system restore has nothing but destroy some files, because I couldn't not correctly backup the drive between the random stops.

  However, I found the solution to my problem, that you won't believe.

  Short answer: I replaced the stock HP keyboard (model KU-0841) who seems to have been short.

  The long answer:

  -When the computer kept shutting down even in safe mode after a destructive recovery, I started watching again material.

  -Noticed my typing would sometimes record, sometimes just go crazzzzzzzzzzzzzzzzzzzzzzzzzzzy (like this).

  -Then comes the keyboard no longer works. Thus, while the veto stops with WORD 2007 and using the keyboard on the screen in Win7, I thought it was a terrible virus - it wasn't.

  -When I unplugged the USB keyboard it's a strange electric 'bzz' sound, like what you hear when static is unloaded. It turns out that the USB port has been be short-circuited by the keyboard.

  On the keyboard and the USB plug was going well, so I don't know who is to blame again, however - if someone is having the same weird problems with events of the power of the nucleus and 1074 with 0x500ff errors-try to check your hardware.

  After replacing the keyboard, everything works perfectly.

• Pavilion Slimline: upgrade to MS10

  I upgraded to MS10 and now my graphics (JUA190) does not work.  I was told that HP does not support the new driver to get my card to work.  I bought this computer before 2013.  This HP can be upgraded to accept the new adapter?  Currently, my Manager shows the basic graphics card.  How to add or change this, if I can.

  Golf buddy

  golfingbuddy

  Thanks for providing the info.

  I wish I had some good news for you, but I did not.

  HP does not provide more recent than Win7 for your PC drivers, so there is no updated HP driver to fix the problem.

  Here is the link to the page of the drivers for your PC: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-Slimline-s5500-Desktop-PC-series/4162194/model/4206331

  To see the drivers for Win7, click change and select Win7 in the menu drop-down.

  You MIGHT be able to install the video drivers Win7 using compatibility mode: http://www.windows10forums.com/articles/compatibility-mode.7/

  Good luck

• Pavilion Slimline s3330.uk Compatible with W7

  Hi all. This is my firsy station, so I apologize in advance any slides in the Protocol.

  I currently have a HP Pavilion Slimline s3330.uk, which originally shipped with Windows Vista loaded.

  The single harware which has been upgraded is the RAM that is now 4 GB.

  Please could you tell me if this PC is fully compatible with the o/s W7 and, if not, what would be needed to do so?

  Thanking you in advance.

  Best wishes

  Harold H.

  Hi, Harold:

  Looking at the hardware on your PC, it must run W7 very well (but not sure 100% on the card reader).

  You will need to use the W7 drivers from the websites of RMP of component material individual because HP does not officially support your model for W7.

  You can also run the W7 Upgrade Advisor free with all connected devices (printer, scanner, etc.), to see if they can also work on W7 as well.

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

• HP w2007v-hp pavilion slimline: upgrade to windows 10

  Hi all

  I just wanted to know how I can go from win7 to win 10 before the free offer runs out. I use an hp pavilion slimline with a display of hp w2007v.

  When I go into the audit tool win 10 pc says:

  NVIDIA GeForce 6150SE nForce 430 - the manufacturer of the screen did not your display compatible with windows 10. Check with the manufacturer support.

  can anyone advise me on what to do? It's easy to download a driver or hardware do I need?

  Thanks in advance

  David

  Renfrew Runner

  @RenfrewRunner, welcome to the forum.

  Here's a thread from this Forum where the original poster has found the solution.  Read the Solution and see if it helps you.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion Slimline s7500n: recovery disk

  I am trying to locate a set a recovery disc for the HP Pavilion Slimline s7500n PC.  I would like to restore the computer to the original software that was on it, but no longer have the ability to do so.  Please write me back as to where I can buy these.  I really, really need them.  Thanks for any help!

  HUH

  EchoHotel

  Hello;
  
  Let me welcome you on the HP forums!
  
  Unfortunately, the site linked to research is a waste of your time because HP is only a recovery media for PC for 5 years since their initial release.

  A few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/
  
  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP Pavilion slimline 400-034: updates

  When is it sholud I never update my bios?

  The BIOS updates are available in the section of driver download Windows 8 of the portal support for your laptop.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-slimline-400-desktop-PC-series/5358996/model/5365421

  It is not really necessary to update the BIOS.

  If you feel that you just have to do and don't mind the risk involved, then download the latest version of your download folder and double-click the softpaq.

  Let him finish and do not turn off the Democratic Party until the end.

  Do not follow this notice may result in a PC masoned.

  A "Bricked" PC is an expensive paperweight is no longer done something of value.

• HP Pavilion Slimline S5: Internal HARD drive failure, PC does not start

  Drive HARD internal of my HP Pavilion Slimline S5 failed and died recently (bought in 2011). My HP warranty is long gone.

  The splash screen has shown this message:

  1720-SMART hard detects an imminent failure

  Due to lack of player: SATA0

  Failed attributes: # 05

  I have several questions about this:

  1. Is it only caused by HARD drive failure? I want to replace it myself, but I don't really know if there are other parts to replace. Or it will be better to bring it to the computer shop to do carefully check?
  2. I can replace it with Seagate Barracuda 3.5 "(7200 RPM, 1 TB, SATA 3 or 6)? I think that the current HARD drive is Hitachi.
  3. I still need to transfer Windows OEM once the HARD drive is replaced?

  Thanks in advance.

  According to the packing of the Seagate, it might come with the software.  But if it is OEM drive then found the software by clicking HERE.  In general, I use a USB adapter for hard drive to clone if the PC will not support an additional drive.  Given that a number of incomplete model for the PC, it is difficult to find accurate info, but the Pavilion Slimline S5 I checked all have a motherboard with additional SATA ports.  Just have a spare SATA cable and power on the power port and try the cloning software.  Make sure that the drive is not touch a conductive element.  Usually, I place the additional reader on a cardboard box.

  Install the new drive as a replacement for the existing drive and connect everything as it is now.  Then connect the old drive in the manner discussed.  Boot from the CD created with cloning tools.  If the old drive is cloned stll, then when the software is finished, remove the old drive connections to see if the drive can start the computer.  If this is not successful, try to run the recovery screen (F11) BIOS boot manager.  If that does not work, use the Recovery DVD set brand when the computer was new.  If you did this, or lost them, then see THATto order a series.