HP Pavilion Slimline S5: Internal HARD drive failure, PC does not start

Similar Questions

• Is it possible to extract personal folders from my hard drive and transfer to an external hard drive if Windows does not start?

  Hello, I recently started my Windows XP Dell computer and it should start up normally unless it would run the ChkDsk utility. It would freeze then 68% on stage 1 and goes no further. I called the people of Dell and after trying so many solutions, including safe mode, safe mode with network and CommandPrompt, we ran the diagnosis. The hard drive and memory are fine, no errors. He concluded that it was the operating system and must be restored. However, I have important files, I need to extract from my hard drive and he recommended me an external hard drive. I bought it, but now I'm not sure how to extract my files from my drive hard if Windows can not even boot the desktop computer. Is it possible to extract these files without the use of the desktop computer?

  And you've burned the .iso image, and not as data? If Yes, then you have created a bootable CD. Put it in your optical drive and restart the computer. You may need to change the boot order in your BIOS. With some machines, you can get a temporary startup command menu by pressing a function such as F12 at startup. Other computers require that you enter setup and change the boot order in the optical drive first of all from there. When you start your computer it will be information about which key press to enter the BIOS (Setup) or give you the temporary boot order.

  After you changed the boot order to boot first from the CD and rebooted the computer, Knoppix will boot. Have your external hard drive connected to the computer before you start doing this. After Knoppix is finished booting, you will be in his office. It will be very similar to Windows. There are icons on the desktop for your internal hard drive and the external hard drive. Copy files from the internal to the external drive as you want. Review what I wrote about the use of Knoppix in my previous answer. MS - MVP - Elephant Boy computers - don't panic!

• After hard drive failure, reinstalling does not serial number

  Trying to reinstall my latest version of Photoshop, I get a rejection "incorrect serial number".

  However, my serial number matches what was purchased by me.

  Any suggestions?

  Thanks advance.

  Mike

  I wondered if it was the CS2.  This should clear the air

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• Pavilion g6-1118TX: reported hard drive failure

  Hello people of the community.

  Recently, I get a message indicating an imminent hard drive failure during startup. I just wanted to know how I can solve the problem and how to buy a hard drive and the same difficulty. The issue seems to affect the cranking up the speed of the laptop. I would be grateful if you can give an approximate value of your new hard drive and the different options available (eg.1TB, 750GB etc.) for PAVILION g6-1118TX model number. Also suggest would be interesting to buy a new hard drive and move or search for improving the system of newer models.

  Waiting for your reply at the earliest.

  Hi @ra1791!

  I'm sorry to say this, but such errors are indicating that the drive is about to fail, then the best option in this case will be to replace it with another unit. If the product is still under warranty, you can contact support, but in case you have no guarantee and you would like a guide to replacing the hard drive you can you take a look at the manual page, user 46:

  http://h10032.www1.HP.com/CTG/manual/c02834221

  Compatible spare disks are also.

  I hope this helps and good luck!

• Qosmio G20-108: RAID-> new HARD drive replacement - he does not want to mirror

  I have a laptop G20-108. The raid was quite happilly mirroring then Hdd2 failed. I removed the disk dirve and replaced by a new one [seagate 100 GB sata 150], but he does not want to mirror?

  The stuff of aide said she should recognize a new hard drive with a context menu? I do not have it, but when you click on the console's hard drive icons both say that they are what they should be, but they are both "affected"? Nine should be disconnected not online? should we not say reconstruction?
  I tried pressing the raid button turn off but it wouldn't let me!

  Help how to leave the raid console know it is a new drive and should rebuild Hdd1?

  Hello
  For the use of toshiba (stripping or Mirroring) RAID, you must have two identical drives. Your G20-108 model comes with 120 GB (60 + 60), two hard drives. If you bought a 100 GB hard drive, certainly it will not work.

  Try this, and you will have no problems:
  Make sure that the disks are identical; You can use two different brands, if they are the same size and speed, but it's a BAD IDEA, just get two new hard drives, same brand and size and you make life simple.

  Francisco

• Added raw lun mapped as a new hard drive, but VM does not see it.

  ESX 4.0 with two Windows Server 2008 virtual computer running.

  Created with SAN volumes and put at the disposal of the ESX host.

  I went in with my client vSphere virtual machine settings and added a new hard drive > mapped raw lun, stored with VM, physical and everything seems to set up correctly after hitting good. I also increased the size of the other two disks on this virtual machine. I rebooted the VM and connected to the server to find that he does not see the new drive, or he does not see the new size increases for other readers. I rebooted the host and yet, nothing new.

  What have I done wrong? Why these changes are not recognized by the virtual machine?

  After the increase in the size of disk or adding new disks, you must go the the VM Windows disk management and resize or format/partition/boot disks.

  André

• Research in Motion driver device network does not start

  I spent the last two days, trying in vain to connect my playbook with my computer via usb.

  I tried a lot of things I've read on the messages that other people have done to solve similar/identical problems, but none of them have absolutely made no difference at all for me.

  Quick summary:
  -The playbook has updates.
  -The usb cable is fine as the playbook connects correctly to a different machine of windows 7.
  -The usb ports are fine (tried many of those on this machine), other devices connect without problem.
  -Have you tried Blackberry Desktop and Device Manager, 7 and 7.1.
  -Playbook has wifi off and regular file sharing on.
  -Have you tried to adjust the 'windows' and 'auto-detect' options of connection on playbook.
  -I uninstalled/installed the Device Manager, Office Manager and the individual drivers several times, with and without restarting the computer and the playbook.
  -Turned off firewall and anti-virus
  -Removal of all applications start and all non-microsoft services.
  - And many other things that I forget immediately.

  I don't think that anything I have read that I have not has tried.

  The problem is very specific. The network adapter (Research in Motion Network Device) seems to be able to install correctly but does not start. After installation, for a few seconds, it is said works normally, then change to the yellow triangle with exclamation point and Driver Details indicates that he failed with code 10, although sometimes the error number is different.

  I watched the windows event logs and it has entries by the driver, not to start but no explanation as to why.

  Has anyone else had this problem? And if so, what can I do about it? Please, I've spent days messing around and I can't spend more time on this nonsense.

  It's weird, I never had a problem one of my devices Android or Apple connection to this computer, only this device. Very discouraging.

  Hello

  There is some information on blackberry - deploy here:

  https://developer.BlackBerry.com/native/beta/documentation/com.QNX.doc.native_sdk.QuickStart/topic/r...

  It's for BB10, but it works on the PlayBook as well.

  You must enable the developer mode on the PB. The IP address is the general number of the machine's IP - that gets it to your wireless infrastructure - not the INVESTIGATION period specific developer, which I think is only used for the USB connection.

  The problem with the deployment on wifi, it's BB tends to close the wifi interface, if you do not use it for a while. So, I think that before you deploy, I often use the Web browser on the BB to wake up the network.

  It's all a bit wildfire, to be honest. I'd rather have the USB works, but (for me) which could be a Linux issue, not a BB one.

  Best wishes

  Kevin

• Pavilion 15 p001tx: repeated hard drive failure

  I brought this device in December 2014. The unit was working fine for about a month, after which he began to hang at startup, when the blue logo appears. This problem continued until March, when the hard drive has failed. It was replaced under warranty.  After that, the laptop worked fine for a while when I started the encounter the same problem along the withslow performance. On contact support, I was tasked to perform a disk hard tick soch showed failure of the hard drive.

  The hard drive has been replaced again, but I'm worried that there could be other problems, as my colleagues, that have the exact same model and are heavy users compared to me, never reported this problem.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you.

  According to the message that you have recently published, I want to confirm that it is a hardware problem and I suspect the hard disk controllers might be bad, so main Board needs to be replaced to completely resolve the problem, I highly recommend you Contact HP support by phone for further assistance to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  Kind regards

  GBL84

  -------------------------------------------------

  Although I am an employee of HP, I speak for myself and not for HP

  If my POST helped you, please click on 'white Thumbs Up' to say thank you!

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem

• want to 1203ee: internal hard drive failure

  Hello
  I have been using a computer hp laptop for about two years and I'm very happy with it until recently, I had a big problem. My hard drive failed and I got to know that my hard disk is dead. I had to replace it. And unfortunately I have no warranty. My question is that I checked my HDD model and that he came to know that it provides a three year warranty. Although the warranty of my mobile is over, will I get my fixed hard drive?
  Prompt response will be appreciated.
  Thanks in advance.

  Hello
  
  Not every part of your laptop are covered by the manufacturer's warranty HP, which is longer in your case.
  
  The option is to buy a new retail brand disk HARD similar form factor, and then replace. You are entitled to claim warranty for the new HARD drive, however, its manufacturer.
  
  Concerning
  
  Visruth

• my 1 TB get failure HARD drive now its does not work, I had used Bitlocker on a driver... everyone can view the data of the disk without password?

  my hard drive does not, makes the noise, and I don't see in my computer...

  a disk is locked using bitlocker... I go to repair hard disk...
  but I'm afraid that my data in the bitlocker drive safe? No one can access without password?
  and what happens if the hdd is irreparable? I will come back my data?

  its working fine now I have clean the power cable from the HARD drive... now my drive HARD works very well... I thank all for answer now, I know the work of the bit locker

• I get error no hard drive detected, so I put in a new hard drive. It does not work. What can I do?

  Windows XP Home Edition on a HP Pavilion zv5405us notebook PC

  Without a cd operation, he begins by saying-

  Intel UNDI, PXE - 2.0 (build 082)

  Copyright...

  For Realtek RTL8139 (X) /8130/ 810 X PCI Fast ethernet controller v2.13 (020326)

  PXE - E61: Media test page, check the cable

  PXE - MOF: Exit PXE ROM.

  And when I boot from the CD of the operating system it is to the point where I choose to install or repair.

  So, if I click on one of those who he says...

  Setup did not find hard drives installed on your computer.

  Setup cannot continue.

  I tried replacing the hard drive, but it was always the same thing, so I put the old one back in.

  I need to find a way to fix it.

  Can anyone help?

  Assuming that your laptop was manufactured after 2003, you can try the HP drive diagnostic tool, but it seems that if you have a more serious hardware problem: cable/connector from the hard drive is faulty or the on the motherboard disk controller has failed.

  You can see also solve the Start Up and No Boot problems checklist but that probably tells you nothing that you have not already tried.

  See also Overview of how the problems when a computer is not Boot or Start Up properly

• HP dv6-3042tx - replacement hard drive? Computer would not start after Windows update

  Hi guys,.

  I'd love to help I bought a HP DV6-3042TX about a year and half ago.  I hadn't used for a while and when I turned it on, he had to do updates etc. for windows 7.  These all downloaded and installed.  However after they have installed I couldn't restart my computer.

  I did a diagnostic boot test and got in return

  Memory test: PAST

  INTELLIGENT control: PAST

  DST short: FAILURE

  FAILURE ID: RLGD7S - 53: 662-XD002J-60QR03

  Product ID: WYRFSPA #ABG

  Hard drive 1

  This mean that my hard drive is actually dead and replacement needs? If so is anyway to recover my files and what model of hard drive can I replace it with?

  Any help would be great

  Thank you

  Hello

  The drive Self Test (DST) short error seems to indicate the hard drive is faulty and must be replaced.

  Regarding your existing files, a possible way to try to recover your files from a disk non-boot is following the process described in the link below.  The CD of the Ubuntu operating system you create can run from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files.

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  Replacing the hard drive is a fairly simple procedure.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins Page 55 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVDs to reinstall the operating system on the new drive - see here for more details.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Drive external HARD with bootcamp partition, does not start?

  Hi all

  If I'm running into a bit of a problem. I had an older macbook pro (mid - 09), kept just upgraded HARD drive I had before I sold it. On this HARD drive, it has a partition Mac OS 10.8, and a boot camp windows partition 7. Now that I have my new Macbook Pro (mid-12), with an impressive but small SSD, I tried to start the windows partition via external enclosure. Im running in some points once I selected the bootcamp on the HARD drive partition. It tries to open windows, but I get the error "Windows failed to Start. Kind of stuck here, seeing that I won't try to Exchange hard disks for obvious reasons. Y at - there a fix, or any way around it?

  Windows 7 can not boot from an external device. Visit the Microsoft Windows features.

• Tecra A9: HARD drive write Cache does not work

  Hello!

  When I try to activate your hard drive write cache, it does not work:
  I can check the box and press OK, but when I go back to the dialog box the box is unchecked.
  The event log shows a warning: "the driver disabled the write on the device \Device\Harddisk0\DR0 cache.

  This slows down my laptop. I don't want to work without the write cache.
  What can I do?

  Greetings,
  Christian

  Hello

  did restart you your machine after checking the box? Usually, you must first reboot the system when certain changes.
  On the other side, you know this microsoft article? You should read:

  http://support.Microsoft.com/kb/332023

  This could probably explain why windows leaves the box unchecked...

  Welcome them