HP Pavilion Slimline s5298d had blue screen problem. Error: IRQL_NOT_LESS_OR_EQUAL (a).
Hello!
Can someone solve the blue screen of my PC problems?
My PC always appear blue error screen especially whenever I stop PC.
Error message: IRQL_NOT_LESS_OR_EQUAL (a).
Arguments:
Arg1: ffffffe5, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: 820d3a6a, address memory
The blue screen issue can be caused by ntkrpamp.exe (nt! ExpScanGeneralLookasideList + 22)
PC model: HP Pavilion Slimline s5298d
Operating system: Windows 7 Home Premium 32-bit
Hi once the device is powered keep tapping F2 button then start the hard drive & test control memory if a test fails, you will need to replace the part if test passes following the steps below. Then you can try the F8 key when the power is on and try the last known good configuration. If this does not work try start repair and try to repair the unit. If these options above does not work you can try to do a system recovery restore or F11 before this please back up your data as it will be lost.
Tags: HP Desktops
Similar Questions
-
Original title: blue screen problem
I got a new toshiba laptop with windows 8 three weeks ago and he has recently begun a lot of give me a blue screen. The main mistakes were a driver power state failure or error DRIVER_IRQL_NOT_LESS_OR_EQUAL. I thought it was because I had software anti computer virus, zonealarm and norton. So I uninstalled norton and the problems seemed to be stopped, because the computer collapsed in four days, however, it will be the laptop I take in College, if I want to make absolutely certain that all drivers and stuff are up-to-date. If possible I'd like transfer the files of dump here and I hope someone is watching and tell me if I have to correct all the drivers on my computer. Unfortunately I do not know how to access my computer crash dump files. So if someone could walk me through this process and look at the files I would be very happy.
Nikhil52
You try to remove Kaspersky of the programs & features Panel first?
Not only do you have Kaspersky and Symantec, but I just noticed that you have Zone Alarm. Who has withdrawn as well.
Zone Alarm is often the cause of BSOD.
http://download.ZoneAlarm.com/bin/Free/support/Download/Clean.exe -
HP Pavilion Elite m9280a PC, blue screen now won't start!
Hello
My pc does not now start upward. It worked fine until the other day when I got a blue screen STOP error. Before that I could write the code that the computer tried to restart. It won't have the option to go in safe mode now, the hard drive light flashes on the front just once when you turn then just sits there, white light, solid screen. I am running Vista.
Any help would be awsome as I am Flexi-rent this pc and do not want to pay for a computer I can't use even turned off!
Thank you
Pat
P.S. I had a Vista disk when I got the PC.
Pat1982,
You should always have a recovery hard disk partition.
When you turn on the computer, press F11 repeatedly until the system recovery begins. For more information, read this:
http://support.HP.com/us-en/document/c00814731
If/when you get all of this done, you must create a set of recovery disks and then perform the steps described in this article, to avoid possible future problems:
-
Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0
And I also noticed that some hardware is not installed to properliy:
1 base system device:
PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
PCI\VEN_197B & DEV_2384 & CC_088000
PCI\VEN_197B & DEV_2384 & CC_0880Device base system 2:
PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
PCI\VEN_197B & DEV_2382 & CC_088000
PCI\VEN_197B & DEV_2382 & CC_08803 base system device:
PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
PCI\VEN_197B & DEV_2383 & CC_088000
PCI\VEN_197B & DEV_2383 & CC_0880unknown device 1
ACPI\ENE0100
* ENE0100unknown device 2
ACPI\HPQ0004
* HPQ0004Can someone help me with this problem?
Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.
-
Windows 7 blue screen problems
Windows 7 blue screen problems is so frustrating. The blue screen of death or BSOD because it is often called. I need help...
Hello
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
so time of the BSOD for more information on the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Windows 7 blue screen problems, please help me
Hey guys, I'm using windows 7, my laptop these past two weeks have blue screen problems. When I boot my laptop, and I use internet after some cell time but I have a blue screen with MSG (Message Details: to your computer. igdpmd64.sys PAGE_FAULT_IN_NONPAGED_AREA)
If this is the first time that you have, "
Please help me, there are the details:
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
More information about the problem:
BCCode: 50
BCP1: FFFFF8811C177B60
BCP2: 0000000000000000
BCP3: FFFFF880067A5A18
BCP4: 0000000000000005
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\042414-20155-01.dmp
C:\Users\manjeet varsha\AppData\Local\Temp\WER-37752-0.sysdata.xml
Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\System32\en-US\erofflps.txt
Here is an article describing how your problem may be related to a bad Windows Update.
KB2670838 update uninstall can solve the problem for you.
-
Win 8-getting all blue screen problems
A few months back I get every week a different blue screen problem, I tried different things but nothing worked, and add one more I hear crackles of sound and the performance is bad, I need help please I can't use my computer over to the University of the way its functioning!
Computer: hp envy 15
AMD 10 - 5750M APU AMD RADEON HD 8650G
16 GB OF RAM
1 TB of space
Thank you!
Tom salpurido
Hello Tom,
Thank you for your response.
I appreciate your time.
Because Windows cannot find the updates, I suggest you run the Windows update Troubleshooter and check. Please follow these steps:
a. press Windows + C keys together, and then click Search.
b. type Troubleshooting in the search box, click on it in the search results.
c. click 'show all' and then click 'Windows Update'.
d. click on 'Next' and follow the on-screen instructions.Please also update BIOS and drivers chipset or firmware from the following link and check.
Reference:
http://support.HP.com/us-en/drivers/selfservice/HP-envy-TouchSmart-15-J000-notebook-PC-series/5354987/model/5447182Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Please keep us updated.
Thank you
-
Computer stops with a blue screen with error fatal when the iPhone is connected
I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.
First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.
My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.
I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.
Thank you.
Hi 1980ckc,
1. have you tried to connect the iPhone to a different USB port?
You can check out the apple support link and check if it hleps:
iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.
http://support.Apple.com/kb/TS1502
Also check out the apple discussion link:
http://discussions.Apple.com/message.jspa?MessageID=10339681
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
My Vista system was crushed, tried everything, but finally resorted to a recovery of the original factory image off the coast of the hard drive Partition. Everything seemed to go smooth but now I get a blue screen at startup: irql_not_less_or_equal STOP: 0x0000000A (0 x 0, 00000002 00000001, 0x81AE8590)
Odd part is the system has two RAM slots, we have a 2 GB key and another has a 1 GB. Could not get the machine to start with two sticks in. Will start with a stick in each thin slot. Will not start no matter how they are installed if you are using the two RAM slots. Ran SFC/scannow. He found errors, that it cannot correct. How can I fix these errors?
CBS log is large enough: what details should I post it to help you troubleshoot?
Note: Were able to update the system, including the installation of updates Windows 128 and seems to be updated throughout the SP-2. I really don't want to run another recovery if possible.
Thank you!
Hello
Perhaps you have different brands of RAM in your computer, and so it would not start with the two inserted Rams. Do a check for your specific PC memory that tells you what products work with your system.
Follow the information in this article.
Know what type of RAM you needIn addition, updated BIOS.
Warning of the BIOS:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.If scan SFC did not fix the issue, I would say that you follow the steps in this article to fix it.
http://support.Microsoft.com/kb/929833
Regarding blue screen errors, follow the steps in this article that applies also for Vista.
-
Satellite A350 - blue screen with error message
At the start of windows7, I get a blue screen with error message 0 x 0000116.
Can someone help please?
It looks like a graphics driver is a troublemaker. Try to reinstall a graphics driver in SafeMode (f8 at startup). Read this article for more information:
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/eb584685-6b8b-4ad7-B6CC-ae5ee78095fb
It is for VISTA but should be the same for win 7 too.
-
Blue screen with error message
Product name: HP Media Center M7250n desktop PC
Product #ED842aa-aba
I get a blue screen with error messages asking if this is the first time I get the error and then at the end it says: it is dumping memory. I would wipe my hard drive and reinstall XP but my system is out of warranty and HP gives me a recovery CD. What are my options.
Hello
If you are looking to purchase a set of recovery disc for your system, you can visit the site http://www.restoredisks.com/.
NOTE: This site is not the HP website and it's a third-party site where they provide the recovery for different computer manufacturers disk (they charge for discs).
-
When I log on my computer its is open for a minute and then a blue screen with error lights and him stops
I can only log in safe mode of network.
original title: blue screen error
If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup. Finally, find the one that is causing your program to crash.
"How to solve configuration errors by using the System Configuration utility in Windows XP"
<>http://support.Microsoft.com/kb/310560 >"System Configuration Utility overview"
<>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>HTH,
JW -
Hello Hello.
can someone help me why this error is coming.
I use a laptop lenovo.
Error details:
product-windows stytem, operating
ID-1003,
source-system error,
version - 5.2.
sysmbolicname-ER_KRNLCRASH_LOG,
error code %1, %2 parameter %3, parameter3 %4 parameter 4 %5 2 parameter1A blue screen (Stop error) has been reported. The message contains the error details. An event with event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
Concerning
Chandra Murali
.net developer,
HYD.
Hi Murali,
· What is the random question?
Try the following.
Method 1: Check for memory questions
Microsoft Online Crash Analysis - windiag
Method 2: Updated with the latest chipset and other computer device driver updates. Log in the Web site of the manufacturer to do the same thing.
-
Blue screen driver error less than stop: 0x000000D1
Hi everyone-
I get the following error message when you access the Internet (such as randomnly)
Blue screen driver error less than stop: 0x000000D1 (0 x 00000778, 0xF93D8F0F, 0x00000002, 0x00000001) NDIS.sys - address F93D8F0F base at F93C0000, datestamp 41107ec
I have frankly not much idea on why this would happened because I don't use a lot of this computer. I actually erase me just my files and photos and to transfer to a USB port so I could donate to this computer. Anyone has any advice they can share? (I did an error checking and it did not work)
Computer details:
IBM Think Pad R50 series (R51)
Windows XP
Hello
1. have you made changes on the computer recently?
Follow the steps listed in the articles below and check.
Stop error message on a Windows XP-based computer: "STOP 0x000000D1".
http://support.Microsoft.com/kb/916595You receive an error message "STOP 0x000000D1" on a laptop computer Windows XP Service Pack 2
http://support.Microsoft.com/kb/888399I hope this helps.
-
blue screen code error 0x0000007e
http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e http://support.Microsoft.com/kb/330182
http://support.Microsoft.com/kb/953356
Or more articles in this search:
http://support.Microsoft.com/search/default.aspx?mode=r&query=0x0000007E+XP&spid=global&catalog=LCID%3D1033&1033comm=1&Res=20Hope one of these AIDS. QQ learn manage!
Maybe you are looking for
-
IPhone shows 68 videos but iTunes 13
Hi all I need help, my brother passed away and I'm saving her videos of her phone, if I opened the Photo app and I can see 68 videos, but when I connect the phone to the PC I see only 13 on the 100APPLE folder. Can someone give me help on how to copy
-
I recently format my computer and reinstall windows 7, since it was the only way I know of to solve the problem with Firefox (I already had this problem too). I download the latest version of firefox 33.0.2 and install it. This version was super fast
-
Help! May not reflect 2009 Macbook Pro to TV via Apple TV3
Hey all,. Hoping someone can help here. What do I need? I have a Macbook 2009 mid Pro, completely updated through this date with El Capitan, 14/02/16. I also have a 3rd generation Apple TV, that I would use to reflect what's on my Macbook to my telev
-
The connection to the server has failed. Account: 'mail.hughes.net', server: 'mail.hughes.net', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E can you all help me to solve this problem?
-
protection of the system only records a week
My computer work Protection system has been initially disabled. I turned on and get what he put in place and it works fine most of the time, apart from the fact that he only recorded on a weekly interval. I can't find any setting or post showing how