HP Pavilion Slimline s5716f: wireless printing problems
To anyone who is willing to help, it would be greatly appreciated... Exhausted
I bought a lexmark Interpret S405 wireless printer tried to operate wireless for a wk now almost night & day, the phone w/lexmk. specialist support that ultimately told me that the problem was my desktop computer Hp the final diagnoise after hrs & hrs, was to communicate manufacturing hp but they said my warranty was expired and it would cost me to help, so here, I always try to get help before I dump this printer. Exhausted all the tips, I promise you. I actually did most of what they were doing, but went alittle far but all has been installed on & on printer appears as it should it worked at one point usb but will not print wireless diagnoise, final gave to me was: Windows 7 64-bit, could not start the lxeaCatsCustConnectService on the local printer. Error message: 10:53, the server has not responded to the application launch or control in a timely. I'd appreciate any help I can get at this point, before I dump my new printer... Extremely exhausted and frustrated. Now I think I bought the wrong printer, but it is supposed to be compatible...
Thanks in advance for anyones time given and included brain...
Fear can not help you a lot for a Lexmark printer configuration, but you can try the troubleshooting services in the following two sites:
Tags: HP Desktops
My computer is a HP Pavilion slimline and my printer is a Dell 968. I can't print from my computer, are these compatible?
· What happens when you try to print?
· You get an error message or code?
Your Dell 968 printer is compatible with Windows 7, check out the link:
Try to install the latest driver on the Dell site and check if it helps:
Follow the steps in troubleshooting section and check if that helps:
Printer in Windows problems
I got my Mac book Pro for Christmas 2013 and initially had no problem printing wireless to my HP Envy 110F, but for some reason, I keep getting problems with printing to the envy of 110. We don't have printing problems with our Ipad for this printer.
I can connect the printer to my Mac book Pro by putting 192.168.1.72 IP address in a web browser, but I get on the symbol bit offline when I print the urge. Last night I reinstalled the printer to print wireless on my mac pro book using a printer cable, which then worked well, but today the same problem reappeared.
I'm starting to think that the problem may have started with the latest version of the update of the operating system to the Mavericks 10.9.4.
All thoughts welcome.
Since you are able to print from the iPad to the wireless printer, I suspect you have to something. I think that the question has something to do with the communication between the printer and the computer and not between the printer and the router. Please use the following document to solve the problem; "Printer is off-line" Message appears on the computer and the printer does not print: Mac OS X.
If the problem persists, do not give up hope, let me know and we will work through it together.
Original title: printing problem
Until yesterday, I was able to print OK using Windows XP and a pro HP Officejet 8500 wireless. Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either. I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.
I guess you do not have all of the error messages.
It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).
Find the IP address of the printer of his network diagnostic page.
Click Start > printers and faxes, right-click the printer and select Properties
Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.
Although some printers wireless HP install a driver having a box in the "Parameters of the Port" tab that says always "print to this same device if its IP address changes" it is best to configure the printer to have a static IP address. See your printer User Guide for instructions.
Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router. See the User Guide of your router for more details.
IPhone 5 won't print wirelessly on Officehet 6500 a. done before, but since the update will not be
Sorry to hear that you are experiencing printing problems.
You use the functions AirPrint and ePrint? The phone is able to see the printer?
Things to check would be that the printer and the telephone are always connected to the same wifi network and that there has been no wifi password.
I have HP Pavilion 15 Notebook PC I want to use it with my wireless printer. When you try to print a message arrives and says denied because I'm on a metered connection. What is a connection counter?
A connection counter designed to limit the use of data to avoid charges.
You can disable this by following the section "How can I change my current MDI (or non-dosed) network connection?" below:
I continually get "off printer" message when it actually works. Lets turn printer and computer or market sometimes, but not always.
Also the frequent messages "printer offline". HP 8600 Ofice Pro, computer desk Dell 8700, Windows 8.1, wireless, no bluetooth, no cable connected, wireless high resistance. Lets turn printer and computer or market sometimes, but not always.
Turning, printer and computer off or will not always solve the problem if your printer is not connected to the wireless network.
Get a wireless print job in Windows 8, to:
) a printer is connected to the same network wireless computers in Windows 8. And
(b) its IP address is recognized by Windows
Step 1: make sure that your printer is connected to the same network your computer wireless.
This information is shown on the printer display panel. If it is connected to the network, the status shows "Connected" and indicating the correct network name (SSID)
If the status indicates not connected or if the printer's IP address is 169.254.xxx.xxx, the printer is not connected to your wireless network.
Step 2: restart the print spooler
Follow this video HP to restart the print spooler for Windows 8. Once your print spooler is restarted, your Windows can detect the IP address of your printer again and you will be able to print again.
Step 3: optional - static configuration IP address for your printer
Usually, your printer's IP address is automatically assigned by DHCP. Unless your printer is to have a static IP address, Windows may not recognize that the printer is offline after a change of IP address because of the power of the cycle. If you are comfortable to assign a static for your printer IP address, this should solve the problem.
Hope this helps.
I plug just this printer 2 weeks ago and there are already problems! A few days ago, I went to print something a TI never printed, so I checkd the queue and it says the printer is offline. I checked and the 'use printer offline' option has NOT been verified. I googled looking for help offline wireless printer and came across some tips to restart the spool.and then unplug and plug back into the printer, so I did and he went online and I was able to print 1 document of 4 pages. But after this document, I tried to print another document, and it said "error-printing" in the queue. So today, after that I restarted my computer, it worked well again - for a document. Then he returned to offline mode. So I watched fo more help online. I tried making sure the correct port with my printers IP address has been verified and he was, and I tried to uninstall and reintalling the drivers that did not help. I basically tried everyting on the HP support on the topic page and nothings worked. But it peprfectly worked well for a week so I don't see why it would be to have these problems now?
Also, I tried to print a document 2 faces a few days (before the issuance of all offline). I went to the printing preferences, click on 'manual' under duplex print, then ok, and it printed all the odd pages, as it was supposed to. Then the screen came from promting me to take the paper in the output tray and the tray and click on continue so I did. I waited and waited and waited for a good 10 minutes and never even printed pages. In the queue it sad it was printing, but it wasn't. I cancelled the document and just tried to print a document face a regular to see if this works-it printed fine. So I tried printing 2 - against new and it's the same as before.
The laptop I am I am trying to print from is a Sony Vaio CR320 running on Windows Vista. I have not instaled anything new in the last week, so I know there are no new program interfering. Also, I have not removed any programs.
Any ideas? I am a student and I am a little lost without a printer lol :/
OK, time to bring in power tools. Download, install and run this tool. He should tell us what is happening. Run it when the printer shows offline.
I'm unable to print 'wide' at the HP DJ 6988 files. The operating system is Vista Home. When it is connected to the printer via a USB cable, no problems. When it is connected to the wireless printer, I can print small files only. (a single page of text created in Notepad prints fine). When I send a 'broad' file, such as a digital camera for example, the 'receiver' (green) blinking merrily away, for about 3 to 4 minutes. Then on 1/8th of the photo prints, then more flashes but nothing still happens. The print queue of the printer displays an error. My son-in-law has printed a picture of her laptop XP, no problem? Seems to me it may be a problem of "winding" of Vista, but I can't wait to hear him talk about someone who has solved the problem?
Unfortunately, I believe that it is the Netgear router. I removed my old trusty Netgear FV318 and replaced it with a Linksys BEFSR81... NOTE! It is a router 'VISTA READY'. This solves the problem. Something to do with 'stacks' but I can't be bothered, this solved all the problems.
my graphics card has a fan that is not working, and I don't get any signal on my monitor after 20 minutes of start... so I decided to get a new graphics card which is better.
so I want to know what is the max graphics card that I can put in this computer and should I go for the same type (AC express graphics card) or get any type that can work with the computer?
Here are the specifications of your HP Pavilion Slimline s3632me desktop computer and its card mother M2N61-AR (Acacia). Based on the specifications, this model has a power of 160 watts, a graphics card NVIDIA GeForce 9500 GS PCIe x 16 HDMI and DVI - I outputs and integrated nVidia GeForce 6150SE graphics with a VGA output. Note that the discreet graphics card and the built-in graphics card is not usable at the same time.
You need to replace the graphics card NVIDIA GeForce 9500 GS PCIe x 16 with a x 16 low profile PCIe graphics card (the card must have a power system recommend assessment of 160 watts or less). All purchased card that has a higher recommended system power supply requirement will require the purchase of a new power supply, follow the recommendations in cards. Your computer's power supply is not a standard ATX power supply and can be difficult to find.
Please send Bravo
I have been scanning and printing documents regularly. one day during the analysis of a doc a message flashed on the computer screen that there was a communication problem between the computer and all in a printer.it persists over and over again.
He had no problem with impression then.
as advised by the media, I downloaded a link . http://169.254.152.74 and saved as a favorite and he used every time I had to analyze.
yesterday it stopped opening.
Contact support who advised me to support responsible link.down to print and scan doctor and solved the problem of scanning and it turned into a printing problem. print a test page, it does not print a document.
After encountering conflict driver down load of troubleshooting, I was informed to uninstall the drivers and the use of the CD that came with the product.i did. without success. scanning is ok.
However, questions have been confirmed to have been solved by the doctor tool but is not printing. not even the test page. There is no abras to low ink.
I double clicked on the printer icon when and as advised by the tools, without result.
I use a laptop sony vaio e series with win7 os.
Please help me solve the problem.
Hello @casia15 and welcome to the Forums of HP, I hope you enjoy your experience!
I see that you have problems printing. I would try to help!
First of all, I would say uninstalling the software of the printer.
Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft. You can do this by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.
Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!
Hi, my printer was printing wireless on both computers. But recently, one of the computer lost connection with theprinter. I had to plug it with USB and it works fine. After a few days later, the other computer has also lost the Wi - Fi connection and I am not able to have this wireless printer work. Reset computer, printer, modem, without change. It still does not work!
Update the firmware to version to migrate on the link below.Restore factory default settings
My customer just bought a printer all-in-one HP OfficeJet 6600. Naturally, the CD than canme with the printer is for a newer Mac OS, so it wouldn't install.
I was able to locate and download the printer drivers for Mac OS 10.5 and install without any problems.
It appears the connectivity without wire between the MacBook with Mac OS 10.5 and the HP6600 is in place, when attempting to print to the HP6600 however, it just says it's printing and nothing out of the printer.
I need a few steps of troubleshooting for this issue.
OK this means there is a problem of communication while connected wireless. Make sure that the printer and the computer are on the same network SSID and if yes then try to access the EWS - Server Web integrated printer by typing IP address allocated to the printer in the address bar of Safari. Let me know what you find?
Never had problems before - now, my laptop (macbookair) can't find the printer.
Network Setup page Test report wireless and HP are both fine.
Connecetion doesn't seem to tbe the problem.
Try to remove the printer and then add it again by opening the Preferences tab and then selecting «printers & scanners»
From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.
This is often useful if you are currently outside experienceing printer issues regularly.
If you still can't find the printer, I would try the steps with connected usb and if a connection is established, delete it.
If the problem persists, restart your mac and try again, and if this does not help, then restart your router also.
My macbook air can't find my printer HP 3070. He has found in the past, but for some reason any, that he can not find it now. Tried in the last three weeks or so nothing works.
Thanks for getting back to me! I have a few steps that can solve the problem.
First, I recommend that you check to ensure always have your printer connected to your wireless network. Try the following:Print a network configuration page
Follow these steps to print a network configuration page.
On the product control panel, press the wireless button (). Wireless menu.
Press the button () next to the down arrow () to select print report, and then press the button () next to OK.
Press the button () next to the Configuration. A Network Setup page prints.
Maybe you are looking for
Hallo, Use Firefox 10.0.2 en IK had geweten prolong van sites integraal op om browser like you save. MVGHerwig
The problem is that I installed Windows on my new pc.I lost my Driver Cd so I downloaded them from Toshiba.Also, I installed the 'value added package' for the fn keys. Now, I can not use the most pressing fn + F3 (for example).I have to press FN and
Thinking on adding additional memory for storage by adding a SDXC card and I wonder if this product supports these cards? An example is a Lexar LSD128CRBNA1000.
Hello everyone! As you can see my excerpt of I got a program that 1. How to open a workbook model. 2. he fills with data. 3. copy the model on workbook final and firm model. I use the lib Excel open since I do not have the reporting kit. It is not sa
I did a system restore on my computer running windows XP and now I get a message when I try and open some software "cannot find Microsoft Visual FoxPro Support Library". Can someone direct me to a solution THX