HP Pavilion TouchSmart 15-b153nr Sleekbook usb 3.0 with windows 7

favorite windows 7 windows 8 and now usb 3.0 ports are inop - suggestions

Driver AMD USB 3.0:

http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&swItem=vc_108697_1

Realtek card reader:

http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&swItem=vc_118675_1

Download the third AMD Chipset driver from this link to the SMBus:

http://support.AMD.com/en-us/download/chipset?OS=Windows

You can do this one first as it will also contain the USB 3.0 driver.

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • Pavilion Touchsmart 15-b153nr, processor up to 2.4 GHz overclock?

    Hello, I currently own the HP Pavilion Touchsmart laptop 15-b153nr and descriptions on all Web sites, it is listed on indicates the speed of the processor is clocked at 1.6 GHz to 2.4 GHz AMD Quad - Core A8 - 4555 M accelerated processor. Is that means the laptop can be overclocked to 2. 4 GHz? If so, how would I go all this? Thank you.

    It is the turbo boost done automatically by the system itself. It is a fast processor - APU.

    You can't overclock.

    Thank you

  • Pavilion G6 1006sh: HP Pavilion G6 1006sh external display does not work with Windows 8.1

    Hi all

    After you perform a clean installation of Windows Professional 8.1 on my Pavilion G6 1006sh I can't use my external Samsung monitor connected to the HDMI port.

    The windows installation is well unrolled without all the problems of the operating system had builtin readers for all devices. So there is no unknown hardware in Device Manager there is no sound, wifi, LAN, etc. In regards to the video card, I see two different devices. There is a generic VGA in Windows and there is an AMD Radeon HD 7400 installed M. The AMD Catalyst software has been installed successfully. In the graphic properties of windows that I can choose from two different outputs video, one is the general Windows VGA is the Radeon. However, windows detects monitor connected only on VGA General (i.e. integrated laptop display) and nothing on the Radeon so I can't use my external monitor.

    Of course, I tried to restart the laptop / monitor repeatedly, unplug / plug the HDMI cable but without success. When I plug the HDMI cable into the laptop the screen displays a message that it is connected, but there is no input signal. The HDMI port on monitor and works in the laptop I used the same setup with Windows 7 x 64 Professional without any problem. It is only the operating system that has changed.

    I tried to remove the General VGA device to force using Radeon, but after restarting it that nothing posted on the screen, I saw nothing on built-in or external monitor so I had to restore a previously saved system configuration.

    I tired to install the latest version of the graphics driver Radeon downloaded from the website of AMD, but crashed and restarted during the installation process of Windows.

    Please help me with this question or make a statement that this version of Windows is not supported on this machine and I must therefore go back to the old system.

    Configuration:

    model: HP Pavilion G6 1006 SH

    RAM: 2 x 4 GB

    OS: Windows 8.1 Professional x 64 (HUN)

    Drivers: installed and automatically updated by windows

    Antivirus: Symantec Endpoint Protection 12.1

    Thank you

    Zoltan

    Hi there @nzole

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand that you have installed Windows 8.1 on your system, but now you can not detect an external HDMI monitor. I'm happy to help you with this.

    First of all, in response to your question, this model is not supported for windows 8.1. It was sold only in the versions that have been configured for Windows 7.  That would mean there is no drivers especially customized by HP for this model for Windows 8.1.  It is possible that you could find a suitable drive for a model that Windows 8.1 which can be strong support enough in terms of hardware, that his driver might work, but there is no guarantee.

    Here is the support page for your model: HP Pavilion g6-1006sh Notebook PC

    Products HP - what happens if I do not see my operating system?

    Do you still have the recovery partitions, or you did a set of recovery discs, before installing Windows 8.1?

  • How to make a tied pny 8G usb drive bootable with windows xp

    Plug USB on pc.

    PC detects a new device. He is listed in "My Computer"

    When I go to start (cmd and enter)

    Command prompt appears

    When I type "diskpart" and enter

    window of DiskPart (or directory) rises

    When I type "list disk" and enter

    I see a list of drives.  Both are internal disks installed in the pc

    However the USB attached 8G pny is not in the list.

    A: the cd players and player are not displayed on this list.

    Some system information follow:

    Operating system   System model
    Windows XP Home Edition Service Pack 3 (build 2600)
    Install language: English (United States)
    Local system: English (United States)
      Gigabyte Technology Co., Ltd., H55M-USB3
    Case type: Desktop
    Processor   Main circuit
    2.93 GHz Intel Core i3 530 processor
    cache of 32 kilobytes main memory
    cached secondary memory 4096 kilobytes
    64-bit ready
    Multi-core (2 total)
    Hyper-threaded (4 total)
      Board: Gigabyte Technology Co., Ltd., H55M-USB3
    The bus clock: 133 megahertz
    BIOS: Award Software International, Inc. F6 12/02/2010
     

    The best way to make a usb bootable with Windows XP is to use Almeza Multiset 8.3.0 It is totally automated. It will use either a Windows Xp folder that you created on your disk or an iso image of Windows Xp. You can use the trial version that the software is not free.

    On another note, I can't even begin to wonder why you are using Windows Xp (especially reception) on this system.

  • Pavilion CTO 2200 g6: test specifications for compatibility with windows 10

    I have a Pavilion g6 CTO 2200 laptop comes with Windows 8 is installed.

    I bought it at the end of 2012.

    How long will it be until this HP tests to allow Windows 10?

    I want this OS.

    @Jeff17866,

    Hello and thanks for the display on the HP support forums.  Here is the link to the test of Microsoft upgrade for your computer.  It should give you a good idea.  Thus, the Windows 10 at Microsoft support page will list all requirements to run the operating system.

    Windows help 10 & how-to

    Thanks again for posting and have a great day.

  • HP Pavilion TouchSmart 15-b129wm Sleekbook drivers

    Hello!

    I have a huge problem... I installed Windows 7 64 BIT on this computer and I can't get the ethernet and wireless services to work. Can someone please help me find the right drivers for these devices to work. Any driver who introduced to Windows 8 has worked, BUT those for the enternet and wireless adapters. If someone can point me in the right direction for where to find the drivers for these adapters either from HP or the manufacturers of the devices

    (I can't find anywhere what kind of adapters so I can go to the website of download drivers manufacturers.)

    Hello:

    See if these ethernet and wireless drivers work...

    This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

    File name: sp56680.exe

    This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

    File name: sp63802.exe

  • Problem adding RAM on HP Pavilion TouchSmart 15-b129wm Sleekbook

    OK, so I have a 4 GB stick in there from when I bought the laptop, but I thought to add more so I got some crucial. Unfortunately for me, it is not a 'door' bit convenient for me to open to access the RAM, so I have to take everything... from ahead. For the first time I put in RAM, I kinda had to put a force on the subject, you know (first time ever put RAM in a laptop), but the metal little clamps on the sides don't click so I just opened the pliers, put it in there then their closed. I said "well I hope that it works" and good thing the computer turned on and everything but when I went to the system (I have Windows 8) they say I have only 4 GB installed. I took it apart again (pain in the ass, you mind) and went out of the RAM and once more tried with the clamps snapping, of course, has not. So I decided to do the same thing and who knows what happened? THE SAME THING. OK now I'm checking the BIOS as well and he also says 4 GB so now I'm here. Please help me: c

    Data sheet:

    AMD A6 (~2.1 GHz) processor

    AMD Radeon

    15.6 screen "

    Windows 8

    4 GB of RAM (Dang it)

    Hello

    Please check if you have checked these:

    Manual: http://h10032.www1.hp.com/ctg/Manual/c03660406.pdf

    Through 2, 17 - page

    Config of RAM to use: DDR3L PC3L - 12800 1600 MHz SODIMM SDRAM

    The memory stick of low power AMD A6 accelerated processor - 4455M is of type DDR3 'L '.

    There are two slots, so you can put an another 4Gigs with the same configuration you have (e.g., ditto config), same brand would be ideal.
    Download, run this tool to know the details of RAM already present: http://www.cpuid.com/softwares/cpu-z.html

    Product details - http://support.hp.com/us-en/document/c03900498

    Go through the Page 49, 50 in the manual of replacement procedure-
    You have to get out of the motherboard to upgrade RAM it seems.
    Better communicate with HP or guy local tech since you are doing it for the first time. I do not my own, if I'm a beginner in the present.

    Concerning

    Visruth

  • HP Pavilion TouchSmart 15-b153cl Sleekbook Windows 7 video driver

    I'm donwgrading of Windows 8.

    I need drivers for 64-bit Windows 7 for this laptop.

    Can anyone help?

    Hello:

    Download and install the driver amd mobility radeon beta on the link below.

    http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  • Pavilion Touchsmart H-100: will I get my HP Windows 8 back to normal startup logo?

    As I went down to 8.1 Windows 7, when I switch to Windows 10, I'll be able to grab the trunk of style HP Windows 8 completely to the way it was before decommissioning?

    @JTaylor1

    Windows 10 upgrades using information based on your current installation. If you downgraded by using a set of stand-alone installation of Windows 7, there was no brand HP, the upgrade will not have this brand and logo no more.

  • Satellite A500 - 14K - key USB not recognized with Windows 7

    I have a Toshiba Satellite A500 14 K, it was pre-installed for Windows 7.
    I bought the upgrade to Windows 7: I got a PC upgrade disk and a windows upgrade disk. I launched the first disk, then the other.
    There was no particular error in these facilities.

    Since this upgrade, my PC doesn't recognize USB keys while they work perfectly with the previous version of windows with this pc. They are normally key usb plug-and-play. When I launched the update of windows, the driver exists, but installation failed in error with a message of access problem.
    I check that the firewall does not block access. I installed the latest version of the BIOS

    I can't find any similar pb on the forum
    Thank you for your help

    Hello

    Have you tried to update (restore) chipset utility?

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  • HP Pavilion a6110n PC stops when you publish movies with Windows Movie Maker

    I use Windows Movie Maker to try to "Publish movie" for playback on a computer (creation '. ") WMV files") [200 MB of files created for 15-minute video].  When I run the app, even by itself, with no other applications running, the PC fan starts strong.  If the computer has served for a period of time, the computer will be completely and suddenly close, before ending the video creation.

    If I run Movie Maker when you first start up the computer, the machine can finish successfully creating the film without stopping.

    I don't know what I need to upgrade or replace.  The CPU is overheating?  Or the video card?  Or both?

    If I need to replace the fan, any suggestion would be appreciated.  (I'm talking a CPU fan? Graphics card fan? or what?)

    My PC Specs:

    Windows Vista Edition Home Premium SP1

    4 GB memory

    320GB SATA Hard Drive - 40GB available

    AMD 64 x 2 Dual Core processor 4400 + 2.30 GHz

    Hi, Yes this video rendering really puts a load on your cpu!  The first thing that comes to mind, and the easiest to fix, is simply clean up the inevitable dust bunnies that accumulate inside the tower.  Have you already checked for that?  If this is not the case, remove the side panel of the tower and clean all the dust, especially around the heatsink from the processor.  Compressed canned air works very well for this.  Here is your product guide that shows how to remove the side panel: a6110n be sure to unplug the power cord from your machine before you start on it!  And let us know what you found.

    In addition, I think that you may know this already because you have taken the trouble to include in your listing, but your hard drive is too full.  Vista is a resource hog, memory and available disk space.  He needs a lot of space to work.  And if it doesn't have enough room, it makes your memory and cpu have to work hard.  You ran a disk clean up lately?

    Start button-> computer-> right click on drive C: Local-> properties-> click "Disk Cleanup".  A pop-up window appears.  I put a control over everything on the list.  Then click on the 'More Options' tab at the top of this window, look under "system restore and shadow copies ' and click on 'Clean up '.  Which may take several minutes if you have not done before.  When it's finished, go back to the top of this window, click on 'Disk cleanup' and click the 'OK' button at the bottom of the window to remove all the files that you checked.  You must THEN run a defragmentation.

    In my opinion, and depending on how much space you freed up with cleaning the disc, you will need to spend at least 50 GB of your data files on this hard drive and maintain.   And then you need to add an additional hard drive to your system.  Many options for this just depends on your exact needs.

    in any case, it's my ideas.  If cleaning the dust bunnies and the hard drive does not resolve the problem then perhaps someone else on the forum will be able to helpl with more technical type suggestions.  I think they're going to need additional information about your system, however.  For example, I noticed that you added 2 GB of RAM.  And you mentioned something about a graphics card fan, but your machine came with integrated graphics.  Also added a video card?  If so, exactly what video card do you have installed and have you also changed the power supply?  Any other changes to your machine to factory specifications?

  • It supports Fusion 7 USB 3.0 with Windows 7?

    Simple enough question.  Is it supported?  If this is not the case, is there absolutely no compelling reason to upgrade.

    IN CASE OF FAILURE!

  • Network drivers for Pavilion Touchsmart 15_n210dx

    I recently got a new HP Pavilion Touchsmart 15-n210dx and it comes preinstalled with Windows 8.1.  So I wiped and installed Windows 7 Ultimate, but the controller network and ethernet controller have not all drivers.  I've looked everywhere I can think for these drivers, but I can't find them. Any help would be greatly appreciated.

    Ethernet controller

    PCI\VEN_10EC & DEV_8136 & SUBSYS_216B103C & REV_07

    Network controller

    PCI\VEN_10EC & DEV_8179 & SUBSYS_197D103C & REV_01

    If you need more information at all let me know and I'll post as soon as I can.

    Hello

    Please try:

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Pavilion-15-n240tx-driver/m-p/3478369#M177814

    Kind regards.

  • I have a HP Officejet 6310 and want to install it on my new HP Pavilion Touchsmart Sleekbook 14.

    I have a HP Officejet 6310 and just bought a new HP Pavilion Touchsmart 14 - b109wm sleekbook.  How do we install the old printer on my new computer? The printer has a cable to the computer. Thanks for any help you can give me.

    Hi RSM288,

    Welcome to the HP forums!

    To install your Officejet 6310 on your new Touchsmart PC, I highly recommend that you download and run the HP printer installation wizard. This tool will find and download the software for you on Windows 7, 8 or 8.1. You can leave the USB cable plugged all the time and that makes things easier as well

    Let me know if that helps!

  • HP Pavilion TouchSmart 15 Sleekbook how to restore the factory settings

    I just need to know how to restore my HP Pavilion TouchSmart 15 - b167ca Sleekbook back to the factory settings. This laptop came without the cd.

    cath9999

    goes on Windows

    http://Windows.Microsoft.com/en-us/Windows-8/what-happened-to-backup-restore

    Or F11 and read the Manual Page 61

    http://h10032.www1.HP.com/CTG/manual/c03601748.PDF

Maybe you are looking for

  • IPhone 6s signal problem

    I bought 6 s 2 weeks ago. I found my 6s signal strength is less than 6 s of my friends, with the same telco provider. We put our phone next door. And my 6s has shown more low-power signal compared to theirs. Can I know how to check? Or is my issue 6s

  • Hard drive failure code

    I get a start up screen that says the current system repair. When I made a F2on start upward, I ran a quick test. The results were disk failure hard short dst.Failure, I'd do it: q09ks4-6le76t-xd7wwj-60th03Product, I would do it: d1c68ua #abaHard dri

  • Turbo tax cannot install because it says that it needsv.4.0.30319 > NET Framework

    What is the problem with .NET Framework v.4.0.30319 tax Turbo which obviously must be able to install?

  • HP 6122 driver

    I've been using the HP 6122 printer for months. It stop working and I can not load a driver. HP says to use the Jet desktop 990c driver I tried this, but it does not load.

  • Pavilion a6542 - no boot, freeze on blue HP Invent screen

    I need help... My Pavilion a6542 does not start. It gets stuck on the blue HP Invent screen. The Bios menu is not accessible (F9, F10, F11 keys don't work), even if the keyboard lights are turned on. Features: It was working fine yesterday, and it do