HP Pavilion TS 15-n263TX: problem starting HP Pavilion TS 15-n263TX

Need help!

Booted up the laptop and got the message "Boot Device" not found in rich white TEXT with a black background. I have not made anything reckless with my laptop and it have closed properly each time, what's wrong with it?

; ~ ;

Hello

If contact you HP by telephone in your local area supports they will see when the machine has been recorded and will know if it is under warranty or not (no receipts needed). They know the serial number of your machine...

If you confirm that my suggestion was the right diagnosis, please feel free to mark as solution, but only after checking the HP drive does not...

Checkurtech

Tags: Notebooks

Similar Questions

  • Windows Vista freezing, problems starting mode safe mode, Windows Update does not work, etc.

    Hi all. I am operating Windows Vista Home Premium Service Pack 1, 32-bit on an HP Pavilion dv6000.

    My problems started about two months ago, when I installed several updates through Windows Update. I started having problems with my USB ports (even if these pilots were not being updated) and the computer was never able to close successfully. I tried to uninstall these updates, but that did not fix the questions I had. I have also installed software (AutoCAD 2007) at the same time and uninstalled, nothing helps.

    Then my computer started to freeze after running for a few minutes. Time seems to vary from 5 minutes of good use for 1 hour, but I found that it works only because this so long, I only open a program or file and use it all the time (for example, reading a book in Adobe Acrobat format). If I try to open the program or additional files, go to control panel, etc. (read: if I do everything related to Windows Explorer) the computer crashes. I can still move my cursor but none of the windows meet, and I can't ctrl + alt + delete to enter the Task Manager (I get a black screen).

    I was manually shut down my computer every time that happens and boot in SafeMode several times. Sometimes when I try to start safe mode it is hampering the crcdisk file and turns off. It happens not every time, however. Sometimes, when it starts it running the disk check, and there has been some index files that it has been deleted and orphaned files that it has been moved.

    I tried to do a system restore to a point before the updates I've installed in October, but my computer has no points system, restore even if he says it was their creation before you install these updates.

    The last problem is that when I go to Windows Update, it says that I have never checked for or downloaded the updates in the 15 months that I've had the computer - is not true, I, he lost at the time of all the record of it. So although I would like to provide you with wonderful with a record of what I've updated and people uninstalled, I can't because all this information is gone. In addition, I can't connect to the internet to try to check the news updates, because our internet service runs a USB modem, which is not communicating properly with my computer.

    I hope someone has an idea of what's going on. I just can't understand the common point that all these questions arise, my technology skills are somewhat limited, so I hope for a relatively easy solution.

    Sarah

    BTW, all my files were backed up on external drives.

    I don't know Jack about computers, but I don't know that I went through almost exactly the same thing.  My pc was ok, then in a month or two, it took a nose dive.  something I did was too that much could not think of everything.  A friend told me to reset my bios to default settings and see what happens.  After having spent only 7 hours trying to teach myself on bios, I got stabbed in this area and it worked.  Everything is great runnng.  Now I can even right click on icons without crashing.

  • TouchSmart USB "had a problem starting," stop touch screen

    TouchSmart 23-f250

    H5p59AA #ABA

    Screen touch quit responding to touch.  He had worked during the 6 months that I have owned the computer.

    The first problem with this computer was at updates would not treat.  Then the touch screen stop - although I can always simply used the mouse.  After many hours of frustration, found the message "The Device USB\VID_0000 & PID_0002\5 & 39aa4398 & 0 & 3 had a problem starting."  USB device not recognized. »

    I refreshed, which did not work.  Then reinstalled the software provided you plant (Windows 8).  It is initially configured.  By updating all the drivers before the update to Windows 8.1, USB stop again, same message as above, with ' problem: 0x2B.  The message says stop Windows the device down.

    Any help will be greatly appreciated.

    Hello PLGalle,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I understand that when you try to run the 8.1 update Windows on your desktop HP Pavilion TouchSmart 23 - f250 all-in-One PC you get an error related to your USB drive and are looking for help. When I take the product #ABA H5p59AA number you provided and put in the Check compatibility Windows 8.1 I get the following message:

    "HP has not tested this PC with Windows 8.1.

    For this reason, HP is unable to provide instructions to update or Windows 8.1 drivers. If you try to update your system, you may lose stability and basic features. "

    Now, this means that you may lose some functionality when upgrading to Windows 8.1.

    I would recommend that remove you USB devices all THE of your computer before performing the Windows 8.1 update again. I also provide the drivers page from PC Desktop HP Pavilion TouchSmart 23 - f250 all-in-one that has all the available drivers for your computer. Ensure that when you have finished the update to ensure that you install the latest drivers on the page.

    Please re-post if you still need help. Thanks for posting on the HP Forums. Have a great day!

  • SE error message: "Run"DLL"there is a problem starting. C:\Users/John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll

    Get the below error message every time I start my computer:

    Run DLLS
    There was a problem starting
    C:\users\John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll
    The specified module could not be found.

    Hello cuefox, thank you very much to judge me.
    We're here to help.
    Continue to browse the web with Firefox, thanks once more.

  • Printing in 2 programs problem started 2 days ago, only firefox works fine with Internet Explorer?

    Services Bank web site has a "Print - Friendly View" text, on the top right of the page that displays the account information in a different format if you click on the text. Printing all other functions work ok. The problem isn't when you use them Internet Explorer. The other program is on the Aflacs website, and the problem is very similar. When I click on the text stating "Print copy of invoice", nothing happens, as the text of the Bank. Both work perfectly with Internet Explorer. The problem started about 2 days ago. When it works well, a window will open and show you what it will print and you click on the text "print", and it prints. Any help on this problem will be greatly appreciated.
    Thank you
    Joe Anderson

    You have this problem when running in Firefox SafeMode?

    http://support.Mozilla.com/en-us/KB/safe+mode

    Do not choose anything at the moment, just use 'continue in safe mode.

    When in Safe Mode...

    • The State of plugins is not affected.
    • Custom preferences are not affected.
    • All extensions are disabled.
    • The default theme is used, without a character.
    • userChrome.css and userContent.css are ignored.
    • The layout of the default toolbar is used.
    • The JIT Javascript compiler is disabled.
    • Hardware acceleration is disabled.

    If this is not the case, see this:

    http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

  • Satellite C670 problems start after upgrade of Windows 10

    Hi all

    I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

    Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
    Impossible to do a spanking Granny restore F8 or F12 nothing to do
    If someone gives you the solution I'm interested
    Thank you, CDT


    Validation has been translated by Google Translator

  • My iPad has been slow and unstable. What can I do if this is caused by a virus from the Internet because that is what I suspect. The problem started after a message like "scripts to run.

    My iPad has been slow and unstable - it actually seems to be hung when I use it. Once I put it, a blue line with four faces (which forms a rectangle or square) appears on the display and moves as he tries to anticipate my next actions or touch on the scree. All started about four days ago while I was downloading of articles in google scholar. A message that reflects something as "run scripts" or "scripts to run" appeared just before the problem started. Please advise on what I can do.

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  • Qosmio F60 - hibernation of freezing and problems starting

    Hello...

    The problems started when my computer goes into hibernation mode and when I press the power button to launch once again, it remains frozen.
    I then press the switch to turn on it works again.
    Option just to start normally or in safe mode.
    Either way comp freezes in the middle of loading and I must push the switch down to the Tower model

    Then the new restart msg saying there is a problem in the start menu and asks me if I want to solve the problem
    I click Yes and a number of things have happened several times:
    (1) computer sets and loads normally
    (2) computer says he can not solve the problem and continues to load correctly
    (3) the computer freezes in the middle of loading or during the process of setting
    (4) computer sets and restarts but crashes in the middle of reloading

    I often have to go through this time half a dozen before I can load normally

    either way my norton antivirus has been come with messages saying I need to reactivate (my subscription is not exhausted) or an error has occurred
    have done a full virus scan - none found

    is this a virus problem? I do a system restore? any other advice?
    help much appreciated

    Hi kkle4,

    You use the preinstalled version of Windows 7 in Toshiba? I can t find any information in your posting on OS :(

    Otherwise I agree with Akuma and you should check the BIOS version and probably an update would be useful. Before you begin to update of the BIOS here are some useful tips:
    -Close all running programs (also, antivirus, firewall, etc.)
    -Make sure that you are logged on as an administrator
    -Unzip all files from zip archive
    -Connect the AC adapter before you can update the BIOS and make sure the battery is fully charged

  • Problem starting Equium L40

    Hello

    I use F1 to start my Equium L40 every time I tun turn it on. It will then start ok but he forgot the time and date, as soon as I update time / date, the computer works perfectly I can access all my email etc accounts without having to put anything.

    The problem started after the replacement of the battery because of that being almost completely dead. I noticed that the computer will not work on AC only without mounted battey but is still charging the battery ok. (if the adapter is ok)

    I love the computer and do not really want to buy a new, but it is very frustrating and tedious when I turn it on.

    Maybe there is a battery backup I can change to fix the problem?

    Any help would be appreciated?

    Hello

    Laptop should also work without battery but connected to the power adapter
    So I guess that your motherboard is affected in some way.

    If the RTC battery (bios) is empty, the time and date in the BIOS menu would be reset to the default value. But in my opinion, this shouldn't be a problem to use the laptop with AC adapter.

    However, the RTC battery can be charged to do that you need to connect the main battery and power adapter and the laptop must be turned on for a longer period of time (18-20 hours).

    Check it out!

  • HP27-k350xt:. On each startup, I get this message. "There was a problem starting C:\Users\bulldog2u\AppData.

    . On each startup, I get this message.

    "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

    Can someone tell me where to find this file?

    Thank you - BULLDOG2U

    BULLDOG2U wrote:

    . On each startup, I get this message.

    "There was a problem starting C:\Users\bulldog2u\AppData\Local\callBuilder\xBin\CallBuilder.dll.

    Can someone tell me where to find this file?

    Thank you - BULLDOG2U

    You don't want in this file.  Ads by Call Builder is malware that opens the ads on your computer.  If you encounter this error, then it is likely that you have an antivirus/antimalware program which was removed from your computer, but left the startup item.  More information on Call Builder, and how to remove can be found here.

    To remove this item from your startup list, follow these steps:

    System (Windows 7) Configuration utility

    1. In the start search box, type MSCONFIG and press ENTER.
    2. Click the Startup tab.
    3. Uncheck the items you want to run at startup.
    4. When you have finished your selections, click OK.
    5. In the box that appears, click on restart to restart your computer.

  • Re: Problem starting L300

    Hello. I'm having a problem starting my L300 - it works very well up until now and has suddenly developed this problem.

    When turned on it, - very slowly - boots for the logo toshiba with the message "F2 for the Setup utility, F12 for Boot Manager" standard, but does not spent there - if left for a while it's just back to the blank black screen, the cursor in the upper corner of flasher for turn a little and then out. F2 or F12 do anything.

    Anyone got any ideas, what could go wrong? :(

    Hello

    Sorry, if I do not understand you correctly. You have a message like, Manager of boot is damaged?

  • HP all-in-one 4620: uninstalled 4620 printer but getting 'problem starting HPStatusBl.dll' notice at startup.

    I uninstalled the printer software HP 4620 on my HP computer running Windows 8.1. When you start the computer, I get the message "error loading c:\programfiles\hp\hpofficejet4620series\bin\hpstatusbl.dll" window message

    Hey @SteveJG,

    I would like to help you today to solve the 'problem starting HPStatusBL.dll' message that you get on your computer Windows 8.1. I understand that the uninstall your HP Officejet 4620 e-all-in-one printer has not made a difference. Just so you know, this error message is for a 'service' that Windows is trying to start it's related to the HP device. I just go and delete this file manually. Please follow the steps below.

    1. Open the Start screen by selecting the Windows button in the bottom left of your computer screen, or by clicking the Windows button in the bottom left of the keyboard, to the right of the Ctrl key.
    2. When the splash screen opens, type computer (can show that This PC)
    3. Click on the computer (or PC) to start the window
    4. When the computer window opens, click on the Drive C
    5. Click on users
    6. Click on your user name
    7. Select AppData
    8. Select roaming
    9. Select Microsoft
    10. Select Windows
    11. Select the Start Menu
    12. Select programs
    13. Finally, click Start
    14. You will see a shortcut here to monitor alerts - ink HP xxxxx. Right click on this and 'Remove' it.

    Once the file monitor ink Alters has been removed, restart your computer to verify that the problem has been resolved.

    Please reply to this message with the result of your troubleshooting. Good luck!

  • Lenovo X 230, CustomEventMonitor.dll 'there is a problem starting'

    Dear Sirs,

    Just after the connection of Win10, I begin to get this error message. How to solve this problem?

    'There is a problem starting'

    and right under "is not a valid Win32 application".

    Here's what it looks like - error

    The answers will go,

    Thank you


  • Problems starting HP Mini 210-2100, partition deleted, flashing the line underscore, System Recovery does not

    Hi all

    my situation is like this:

    When I turn on my laptop I get a black screen with a flashing underscore above it "no boot device - insert boot disk and press any key" (even if the BIOS boot order a hard drive for laptop on top). I changed this order a couple of times because I used a USB stick with Windows 7 on it (black version) to enter System Recovery Options (without USB I can't access the system recovery (F11 doesn't work not).)

    My System Recovery Options window is white/empty (no operating system, the size of the partition and the location). I'm going on and click repair system that did not help (it of a loop, do not start Windows). In the Diagnostics and repair of details it is Root cause found:

    The partition table doesn't have a valid System Partition.

    Repair action: Partition table repair

    Result: Completed successfully. Error code = 0 x 0

    That's because before this problem starting with underscore flashing, I had another problem: "BOOTMGR is missing. Press Ctrl + Alt + Delete to restart» I was impatient and wanted to fix that quickly and made a big mistake, after looking on the web for some time I have found no useful websites describing how to fix it (I found one when it was already too late). I went on a channel on youtube and came with: https://www.youtube.com/watch?v=S8n-G9Rv2zo before I didn't know what a clean install was, I looked up 03:55 and made perfect:

    CMD:

    DiskPart

    list disk

    Select disk 0

    partition from the list

    selected and deleted all 4 partitions (size: 215GB, 199 MB, GB, 103-17 MB)

    created new partitions same dimensions (all the primary dimensions)

    then I stopped and clicked on a cross (x) in cmd to get out when I came to a new window where I clicked on YES (I have not read what he was doing, I just wanted to go to bed because it was too late). Since there is no "BOOTMGR is missing. Press Ctrl + Alt + Del to restart"(damage because now I know how to fix this, I was just too stupid, impatient and irresponsible), there is just a line of underscore flashing with"No boot device - insert boot disk and press any key"any of the BIOS boot order is this sentence does not disappear. He did a couple of times before, but no more.

    So after this long description, my question is:

    Is there a way to recover my data which I assume is lost and can not restore? I have no backups or images.

    P.S. I do not installed Windows 7, I just deleted partition table and created a new.

    Sorry for my English, I'm not a native speaker. Thank you in advance.

    Hi MatBar,

    Thank you for visiting the Forums HP's Support and welcome. I'm sorry but there is no way to recover the data once you have deleted the partition. You could try a local repair facility, given that some devices of data to recover your data.

    You may restore the Windows 7 operating system with disks if you find someone with the same version of Windows that you use their discs.

    I hope this helps.

    Thank you.

  • HP ENVY 15 J109TX: Problem starting Windows HP Envy 15 J109TX

    Hello

    My laptop has a problem starting the OS.

    Same recovery does not work.

    I gave to the service center for repair they me contact number of drive recory.

    So, I called the 1800112267 number, but they told me to contact the Service Center.

    The one you suggest how I can fix it.

    BONES recovered by the service center!

    Don't know how!

  • Problems starting yoga 13

    Hello
    I got a new Ideapad 13 of Yoga that has problems starting from time to time, especially when I carry in a backpack.

    This time, the battery discharged when it was suspended. Connecting it to the power, it begins with orange battery LED and says no device detected start and does not detect SSD.

    Power it off and try to restart, it lights. The battery has charged more than 20% but still does not start.

    Long pressing power until it shuts off and try to restart it sees turning white power led for like 1 or 2 seconds then turn off.

    Unplug the power cable and in him plugging back sees so much power and battery LED light white balance, but computer does not.

    He did before, with the behavior of a few hours to a day or more.

    What could be the problem.

    At took the camera to the centre of care. They say that the problem is the battery.

    Kenya Lenovo declined to replace the battery or manipulate the laptop in the future because I bought it in the United States. Maybe it's what is causing the problem, buying the camera in a country of the first world rather than a third world country where the poor customer service is the norm.

    The stellar nursery fixed also the keyboard bad - it now top down bounces when you type keys.

    Laptop computer now boots, but wonder how long before the return of the issue.

    Whether to ship a $75 battery or rteurn think the * bleep * thing and request a refund.

    Lenovo: for those who can not!

Maybe you are looking for

  • My Apple Watch has just stopped working

    My Apple Watch just stopped working about an hour after it has been loaded. All I have is a black screen

  • E3631A Agilent

    Hi all I am relatively new to labview and trying to control my diet E3631A Agilent. So I bought a usb series adapter and downloaded the driver from the website of OR: http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=0475216F9FCA5

  • How to format a hard drive to removable storage?

    I have been using an external storage WD as drive E:\ for backups.  I now need to use it with my computer repaired that has a new mother board and CPU, because the old one crashed. Now, I want to use the same WD Storage for backups with my computer r

  • How can I change file associations in Windows Media player 11?

    When I go to default programs and work the check boxes you want to greyed out.  I am in my admin account, or at least I have that I am, but not go yet.  I'm working on a vista 64-bit computer. R6

  • Photoshop Version 12 x 32 and Outlook 2007 are compatible with Windows 10?

    If they aren't, how can I get Windows to stop asking me to upgrade to Windows 10?  I don't want to lose access to or the functionality of my programs.