HP paviliondv6-1355dx videocard
Can I upgrade the video card on the pavilion dv6-1355dx? Thank you
Hello
I, ve answered on your other thread on the link below.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
Pavilion dv 6-1355dx videocard
can I upgrade the video card on the pavilion dv6-1355dx?
Hello
I'm afraid you can't. The graphics chip you physically is soldered to the motherboard and there is no practical way to be able to change it.
Best wishes
DP - K
-
Pavilion G7-1355dx: card network problem
Hello
I had previously posted the question below and took the lead on mark as resolved. The answer I got was good, but because of many different configurations of my model of my laptop model, it was not correct for mine.
I have an old HP Pavilion 1355dx G7 and I use it during the games XBOX a stream. It has only one network adapter Wireless 2.4 ghz, if coupled with that much congestion in my neighborhood, it broadcasts only during the flawless. New info: my laptop has an AMD processor, not an Intel processor.
This laptop does support 5 GHz wirelesss network cards compatible with AMD? I am hoping to move to a 5 ghz however I want to make sure that it supports and is on the white list before I buy one.
Thanks for the info. That's what I was afraid of. Can be an excuse to get a new laptop and let the kids use it. It is not a big deal, for the most part, it works well, but you can see in sensitive applications.
I used an app WiFi Analyzer and each channel is overused. I'm surrounded by more than a dozen networks (tons of apartments) and use channel 11 that is congested, but less crowded than 1 and 6. -
Pavilion G7-1355dx: Question of wireless network adapter
Hello
I have an old HP Pavilion 1355dx G7 and I use it during the games XBOX a stream. It has only one network adapter Wireless 2.4 ghz, if coupled with that much congestion in my neighborhood, it broadcasts only during the flawless.
This laptop supports 5 GHz wirelesss network cards? I'm hoping to move to a 5 ghz however I want to make sure that it supports before as I have buy a. I also noticed that my wireless network adapter is slightly larger than the 5 ghz adapter I have in another laptop. How can I determine the size when I order one, if it is supported?
Intel Centrino Advanced - N 6230, only for models with computer
a processor Intel 631956-001
Intel® Centrino® Advanced - N 6230 is a dual-band (2.4 GHz and 5.0 GHz), 2 x 2, IEEE 802.11a/b/g/n Wi - Fi and Bluetooth * wireless network card that offers up to 300 Mbps of bandwidth, up to 2 x the range and more consistent connectivity.
Your manual here.
http://h10032.www1.HP.com/CTG/manual/c03538328
If you order a make you use the HP part number.
REO
-
Error 601 on HP Pavillion G7 1355DX start - but I can't locate CMOS to replace
Hello
We have a 1355Dx Pavillion G7 + 2 years and he began to give the 601 error at startup. I did search these forums and all can determine, is a problem of internal battery, which means CMOS. But when I turn the laptop and remove the battery, then the access cover where the HD and memory, I don't see anything that even looks like a CMOS battery. Battery main high-power is model 593553-001.
This model is a CMOS battery?
Any help is apprecaited!
Thank you!
BCA
Hello
601 error code is a bit misleading - it's refers to the main battery of your laptop computers and not the RTC (CMOS) cell on the system board. This error code is usually generated when the main battery capacity fell below 25% of its original value.
To confirm this, you can run the test of checking battery in HP Support Assistant or download and run the battery pack utility test available on the next page.
http://h20239.www2.HP.com/TechCenter/battery/battery_ts.htm
Kind regards
DP - K
-
HP Pavilion g7-1355dx Notebook PC processor upgrade
I have a HP Pavilion g7-1355dx Notebook PC with a processor AMD A6 - 3420 Mr. I want to switch to the Intel® Core™ i7-4790 K, Intel® Core™ i7 - 4790 S or Intel® Core™ processor i7-4790.
1 are these processors intel compatible. with my system (motherboard, graphics, chipset)
2. If 'yes', then where can I find DETAILED procedure and what other components would need to be changed?
3. If 'no' then what processors are compatible and where can find a DETAILED procedure?
Hello
The processor is not welded. But you can't replace AMD to Intel. You must watch the sockets and chipsets.
Thank you
-
Pavilion dv6-1355dx: need to raid scsi driver
Hi all.
I have a laptop Pavilion Dv6-1355dx who originally Windows 7 above. I would like to downgrade to Windows XP 64 Bit and I need scsi-raid for hard disk driver.
If you have a download link, could you please send to me.
Thank you
Hello:
I have compressed upwards and attached storage controller drivers you need for your laptop below.
You can read the link below the section of Intel, and then read the downloadable document for how to integrate all the drivers.
-
Display the slider volume not showing on dv6-1355dx
Slider volume control adjust the volume, but does not appear on the display. Did a hard reset but does ' t solve the problem.
Any suggestions will be appreciated.
Using a HP dv6-1355dx MediaSmart with Windows 7 SO.
Thank you
MELC
Thank you Paul,.
The software you suggested did the trick.
Thank you very much.
-
Keyboard prints only p constantly, on my hp paviliondv6.
Keyboard on paviliondv6 has only prints p and constantly makes this pppppppppppppp. We know the part # for this problem?
-
HP DV6 1355dx downgrade to XP (problems with 2 conductors of location)
Hi guys,.
I installed win xp, but there are 2 drivers found
See below is name of the driver and the hardware ID,
NETWORK CONTROLLER
PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086 & REV_00
PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086
PCI\VEN_8086 & DEV_0084 & CC_028000
PCI\VEN_8086 & DEV_0084 & CC_0280
************************************************************************
SM Bus controller
PCI\VEN_8086 & DEV_2930 & SUBSYS_3627103C & REV_03
PCI\VEN_8086 & DEV_2930 & SUBSYS_3627103C
PCI\VEN_8086 & DEV_2930 & CC_0C0500
PCI\VEN_8086 & DEV_2930 & CC_0C05
************************************************************************
If someone could find me the right driver for the latter, it would be a great help
Thanks in advance
Best regards
Chathuka
Hello
chathuO2 wrote:
SM Bus controller
PCI\VEN_8086 & DEV_2930 & SUBSYS_3627103C & REV_03
PCI\VEN_8086 & DEV_2930 & SUBSYS_3627103C
PCI\VEN_8086 & DEV_2930 & CC_0C0500
PCI\VEN_8086 & DEV_2930 & CC_0C05
Download and install:
Intel chipset (Install and reboot before other drivers) here
chathuO2 wrote:
NETWORK CONTROLLER
PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086 & REV_00
PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086
PCI\VEN_8086 & DEV_0084 & CC_028000
PCI\VEN_8086 & DEV_0084 & CC_0280
Download and install:
Intel Wifi Link 1000 BGN here
-
I have upgraded to windows 10 and did not like it and tp attempt to restore the computer and accidentally erased my original windows 7. I then bought and installed windows 7 64 bit and the computer does not work properly; I need now the drive of 32-bit windows 7 original.
Hello;
Let me welcome you on the HP forums!
I wish I had some good news for you, but I did not...Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This means that the stock HP is no longer the recovery media for your PC. They store any long recovery media for older PCs.
Given that HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/Good luck
-
Satellite L30 - 101 videocard memory: how to change the amount of shared memory?
Hello. I'm using Windows Vista and I have a problem with my VGA settings. There is no option to set the amount of memory on the part that is using my video card. In the BIOS, or the Catalyst Control Center. I can't fix same refresh rate of 70 Hz screen because the pilot is automated at 60 Hz settings without editing option. How can I change this? When I try to play call of Duty even the intro movies are skippy, even after installing the latest version of Direct X. The game is relatively good running, but I think on this configuration, it should work much better.
Here are my specs:
CPU: Intel Celeron M 1.5 Ghz
Video: ATI Mobility Radeon Xpress 200M up to 256 MB
RAM: 1.5 GhzHello
If you want to learn a little more about the refresh rate of the screen and why he s a standard on screens TFT please check this post:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19588&MessageID=71816It s a useful description.
But generally, I agree with Abe. The 1.5 Ghz processor is enough to use normally. But if you want to play games like Call of Duty you will need a lot faster for laptop.
Of course, this game run also on the unit you but you will not be able to play this game with a maximum return. -
Re: HP DV6 1355dx downgrade to XP (problems with 2 conductors of location)
Hello Chathuka
I have same laptop and I want to install windows xp 64 bit.if you still driver hdd scri could you please send to me.
Thank you
The F6 SATA ahci driver for XP 64-bit can be found here.
https://Downloadcenter.Intel.com/download/18668/AHCI-F6-floppy-disk-utility-for-AHCI
I ran XP 64 bit on several machines at the time where first of all, he is out and do not recommend. There was little support from driver back then and it may be worse now. It was fast, but unstable, a work in progress.
-
I was wondering if anyone has found a solution to this problem. I downloaded all the drivers, registry added/changed, ensure that scrolling is checked and researched point nausium. Hair is gone!
Any help is appreciated.
HOW TO TROUBLESHOOT THE TOUCHPAD SETTING RESET
- Download version 18 of the Synaptics TouchPad Driver and software.
- Navigate to HP Software and Driver Downloads site (http://www8.hp.com/us/en/drivers.html) to find the last pilot approved for your model. Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down. Find the download in the category 'driver-keyboard, mouse and input devices. If a Synaptics driver with a version from 18 number figure, download.
- If a Synaptics driver with a version from 18 number is NOT listed, download the driver directly from HP (http://ftp.hp.com/pub/softpaq/sp68001-68500/sp68198.exe).
- Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
- Change the Windows Update Services automatic (delayed start) parameter to the manual.
- In Control Panel, select administrative tools, and open Services.
- Go to Windows Update and double-click it to view its properties.
- Click on stop to stop the service to run.
- Change the Startup Type to manual, and then click OK.
- Uninstall the version 19 of the Synaptics TouchPad driver.
- In Control Panel, select Device Manager.
- Click on the "+' beside 'mouse and other pointing devices" to expand this category.
- Double-click the Synaptics TouchPad of SMBus to view its properties.
- Go to the driver tab and click on uninstall.
- Check the box to delete the driver for this device, and then click OK to uninstall.
- Uninstall the version 19 of the software Synaptics TouchPad (HP control area).
- In Control Panel, select programs and features.
- Scroll down to the area of control of HP (published by Synaptics Incorporated) and uninstall it.
- Restart your computer.
- Install version 18 of the Synaptics TouchPad Driver and software.
- Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates for the Synaptics TouchPad driver. (This will block your system automatically reinstall or display of updates for the version 19 of the pilot).
- Change back the setting of Windows Update Services to manual automatic (delayed start).
- Restart your computer.
- Rejoice! Your TouchPad settings will save eventually in the sessions again.
-
HP paviliondv6: recover the operating system
I had an attempt to try to dual boot my laptop for windows 10 first and then linux, I accidentally chose the wrong disk during the installation partition and windows 10 startup files as well lost, and now I have no OS on my laptop.
I tried the f11 key at startup for the recovery of the system but it helps all.
Is there anyway I can reset my computer to factory settings... or a way I can recover my files by some recovery point...
As a beginner, it was a naive mistake... but if a solution please say so!Hello
You are welcome
An option would be to remove the drive HARD, place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.
External 2.5 HARD drive caddy ".
Kind regards
DP - K
Maybe you are looking for
-
where is (use TLS 1.0) in the new version of firefox?
Hello dear In previous versions of your software as an option (use TLS 1.0) existed, but the new version doesn't have this option. How can check this option? Please guide.
-
There is a backup in FF4 button is higher than round of FF3. But the right of the front there was a drop down menu that formularies the last dozen pages. This feature can be enabled in FF4 or should I look for a plugin to do this. I can't believe the
-
Satellite A100-773: what compatible CPU are?
HelloI was wondering what the other CPU intel could enter my 773. I wanted to move to a t2500 (2 ghz).my real cpu runs on a 533 mhz fsb. the motherboard supports a higher fsb? It adapts automatically when I plug the T2500 or is it not possible to upg
-
Folio 2000: BIOS password
Try to boot with USB to install the new operating system but forgot BIOS password. I received the message system disabled 68763911. Thank you.
-
Messages do not automatically moved from the Outbox to the sent items
Hello. Everything worked fine until 08:00 this morning. Now, when I send an email, it is sent but is not automatically moved from Outbox sent items. So, I get an error message (but no error code. He says only: "some errors occurred while processing t