HP Pavillion G6: hp will continually turn off but cpu 48 - 49 c temp

Similar Questions

• K010 ENVY: my laptop will not turn off

  Hello

  When I shutdown/hibernate/standby/resume my laptop, it will die completely.

  All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

  And when I try to Hibernate, everything is ok, but I have the same problem.

  Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

  After manual turn off, when I turn it on again, everything works correctly:

  -If hibernation: OS will continue to last situation.

  -If start/stop: OS works normally without error or warning.

  After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

  Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

  Is there a parameter/software to check and fix my problem?

  Thank you

  Hello

  You are welcome

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• My laptop will not turn off...

  My laptop will not turn off, even if I push the power button for 10 seconds.  The only way is to get out my battery and unplug the unit.  It started immediately after an update about two weeks ago?

  Hello

  ·         This happens even when the power chord is connected?

  ·         What is the brand and model of the laptop?

  Method 1:

  I suggest you to check the power settings on your laptop in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2:

  I suggest you put your computer in a clean boot state, and check if the problem still persists. Click on the link below to find out how to perform the clean boot in Windows vista.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 3:

  I suggest updating the latest video drivers on the manufacturer's Web site, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Check out these links for help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  I f the problem persists I suggest you to contact the manufacturer of the laptop and check if it helps.

  Kind regards

• my printer will not turn off

  Office Jet 6500, wireless, printer will not turn off.

  Disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

• computer won't goto sleep IE screen turns off but the hard drives will not be

  No matter what I put in power options, the computer won't go to sleep.

  The monitor turns off but the hard drives, fan to continue working.

  I can't force the drives to put beyond the control of the characteristics to uncheck in the power options.

  The computer turns off when the power off but sleep option does not work.

  Thanks for any help.

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may be due to the following reasons:

  -The drivers are not updated.
  -Power option settings are incorrect.
  -The devices connected to the computer are preventing it from going into standby mode.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Windows 7 is not going to sleep
  https://Support2.Microsoft.com/kb/976877

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Pavilion dv2415nr laptop. It will not stop. I downloaded the software and it will not turn off.

  I have a laptop dv2415nr Pavilion and it will not turn off.  I recently downloaded some security software and it is not stopped since the download.

  Hello

  I recommend that you make sure you have your license key for webroot. Uninstall the software and reboot. If that solves the problem, it's time to go to the Webroot support and ask their tech support that it.

  Kind regards

  ERICO

• 3000 - X 11: button / stop turns off but not on!

  It's true!

  I have a 3000 - X 11 and the only way to start is with the switch of CD/DVD/Media Player - pressing the power button does nothing.

  When the machine is turned on, you CAN press the power button and the machine will be turned off...

  Any thoughts and pointers would be really appreciated.

  Thank you very much

  Lee

  Hello

  It is a strange question. I m not 100% sure what the problem may be. Maybe it s has the motherboard or other for lack of material. I recommend contacting the Toshiba service partner because has more experience with these cases of hardware failure.
  On the Toshiba site, you will find an ASP that is responsible for your country.

  Good bye

• Hibernation problems - my computer turns off but it restarts immediately.

  I am running Windows Vista Home basic with Service Pack 2.

  Recently, I used a disc clean up program which seems to affect hibernation. My computer turns off but it restarts immediately. I went to the command prompt as administrator and checked what is available - S3 - and that you typed in "powercfg / hibernate on ' but it will not always 'down'." I cut and restarted, but still no improvement. Has anyone else had a similar problem? If so, how to solve it?

  I am running Windows Vista Home basic with Service Pack 2.

  Recently, I used a disc clean up program which seems to affect hibernation. My computer turns off but it restarts immediately. I went to the command prompt as administrator and checked what is available - S3 - and that you typed in "powercfg / hibernate on ' but it will not always 'down'." I cut and restarted, but still no improvement. Has anyone else had a similar problem? If so, how to solve it?

  Microsoft recommended a different command:

  http://support.Microsoft.com/kb/928897

  I used the disk cleanup tool in Windows Vista, and now the hybrid sleep feature and the hibernation feature are unavailable

  Click Start > programs > Accessories > right click on command prompt > run as Admin >powercfg-h on

  Alternatively, try the Fix - It.

  See you soon.

  Mick Murphy - Microsoft partner

• Laptop screen turns off but the system never sleeps when closed.

  Hello!

  I have a laptop Alienware M14x and quite frequently when I close my laptop, the screen turns off but the system will not. When I reopen it, the screen stays off and the system seems still to go but no matter what I press on, the screen does not turn. To fix it, I just turn it off power then back on the power button. I know that my laptop is still running because the fans are still running and the lights on the front and on the keyboard are lit. I don't know if this is a problem common or not, but it's really annoying.

  Any help would be greatly appreciated! If there are other details that might help, do not hesitate to ask!

  Thank you!

  -S.

  Firstly I find a windows command can tell you if you have something that prevents the mode 'sleep'. Run as administrator command window and use the command: powercfg-query.

  If you have my problem and SRVNET is active, you will see this:

  SYSTEM:
  [DRIVER] \FileSystem\srvnet
  An active remote client recently sent requests for this machine.

  2. to add SRVNET to the exempt list, do the following at the command prompt (EXACTLY as shown below.)  DRIVER MUST be written in capital letters):

  powercfg - requestsoverride DRIVER '\FileSystem\srvnet' system Awaymode

  and for good measure (not sure if necessary but I did anyway)...
  
  powercfg - requestsoverride DRIVER "srvnet' system Awaymode

  3. once all is said and done, it should look like this after you run:

  powercfg - requestsoverride

  [DRIVER]
  \FileSystem\srvnet SYSTEM AWAYMODE
  srvnet SYSTEM AWAYMODE

  4 enjoy again the "sleep mode".

  Credit is to JohnnyN to http://yabb.jriver.com/interact/index.php?topic=79201.0

   

• Aspire power E1 light - 572P stays on when I stopped. Screen turns off, but the router is plugged

  When I quit my Aspire E1 - 572P the screen turns off but the blue light and the router remains connected.  Ethernet services and internet used to go off. Any suggestions please.

  Go to power options. On the left side, click on choose what the power button. Scroll down and uncheck quick start. Save changes and close.

• Defender is turned off, but does not give me access to it 2 turn on power

  original title: windows Defender

  These days have a lot of problems with my laptop.  Problems with starting.  I need to access windows defender to modify startup programs.  It is said that Defender is turned off, but does not give me access to it 2 turn it on.  In addition, different problems with different users and accounts by the office put in place, it looks like all my users are running different versions of windows, so I don't know where to start with all the problems.  Security sounded like a good place 2 start, so I guess I'll start by Defender problems.  (I have recently downloaded the free security essentials, safety signs so all green lights).

  Hello

  You might have developed some questions so I would make these your
  Admin account. These are in addition to checking your startup
  programs.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• Inspiron 15r will be turned off completely

  Hi all

  over the past two months, my laptop has not been able to completely stop.

  What's happening: I click on closing down, it disconnects and the screen goes black.

  It seems stop but the light power button, and the front power led remains lit.

  The only time where it will turn off successfully is when I restart the laptop.

  I hope someone has an answer to that. Thank you!

  P.S (there is a period where I took the battery and used as an office. maybe that has something to contribute)

  I had some of the same problem. I am working on a friends N5010 (1545) laptop and no matter what I did the laptop would not be stopped and the CPU constantly fan would go right from the beginning to the top. I click the button 'Start' and close as usual. However the laptop continues to operate even if the hard drive light was off. Only the power led remained. I even installed different versions of the operating system in the hope that the backup image of the disks I was using was corrupt and cause a problem. I searched other forums and have found an answer to a similar survey that says to remove the CMOS battery and reinstall it. I have disassembled the laptop, removed the battery (which I might add was down, I had to remove the motherboard and flip it over) and then reinsert the battery. Since I got everything disassembled, I changed the battery, just in case where instead of just re - install. After reassembly and re - install the original from backup, disk image works well. This worked for me and can work for you, if you do not already solved your problem.

• Effects will automatically turn off.

  Regularly after 2/3 days effects (when opening application it is effect type zoom to open the application or at the opening of the iphone lock) turns off automatically. Also during the opening of multitasking or any application. After you restart the iphone, it resolved for 1/2 days. And yet, the question arises after 2/3 days.

  We can show in pictures how effect stops. So I can not download.

  Before I aksked this question if someone suggest me to reset all the settings and force restart but the issue will come back after 2/3 days.

  Please solve out!

  Try settings - general - accessibility - reducing Motion-- rocking MARKET and see if one of them is to your liking

• 8500 HP OFFICE JET PRO 8500 A909n error: B87126D0, unit will not turn off or print

  I'm having the same problem as described by others, "error of 8500 HP B87126D0, unit not turn off or print.

  I followed all the instructions from documeneted on this thread. I also replaced the power Module, in the hope that would solve my problem. I have an OFFICE JET PRO 8500 A909n PRIME

  Not sure why the solution cannot be posted here, as I see many others with this same error and the exact symptoms.

  Whatever it is, I really appreciate a solution 'private' as well.  Really, I love this printer and would rather not have buy another.

  Thanks in advance!

  Hello @rnegron57,

  Welcome to the Forums of HP Support! I see that you have found an error code on your HP Officejet Pro 8500 first, you are unable to power the printer on or off.

  You have completed the recommendations online without success, and you've seen other members of the community receive private messages. I would like you to take a look here: printer resets: What You Should Know

  I went ahead and you sent a private message, please go to your user page to the right of your name, you will see your Inbox.

  I'll watch for your reply, I would like to know the results.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• DesignJet 815 MFP - The Scanner lamp will not turn off

  Before we had the controller and lamp replaced on our venerable 815 scanner card (i.e. before the last apparently got watered by a power surge), I seem to remember that the lamp will auto power off after a period of inactivity to prolong the life of the lamp.

  A new has served without interruption since a few days now, which is not healthy for me.

  I couldn't find anything in the settings, the manual online or on the auto layout PDF user guide... I just imagine that this was how things were at work? If it is SUPPOSED to shut down to protect the lamp, no one knows where this setting is hidden or how to turn it on?

  P.S. This thread has been moved for Designjet scanners. Forum Moderator - hp

  I don't know if this answers your concern, but want to share with you information on the setting of the option "timer" (Figure 8 - WIDEsystem):

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c00014044-1%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1400756649874.876444892.492883150