HP pc 7200 problem

Similar Questions

• Pixcels Max Portege 7200 problem

  Hello

  I reinstalled my win2000 on laptop, but its screen is maxed out at 800 x 600, causing the smaller display area.

  Please suggest how to solve this problem.

  Thanks in advance,
  Sachin

  Hello

  Have you checked all the options in the display properties? Check also under Advanced > adapter is it option list all modes. There, you can choose a sufficient resolution.

• Someone at - it problems of heat upgrade to a 7200 RPM HARD drive in a MacBook Pro 13,3 "2.5 GHz Core i5 (A1278) - mid-2012, MD101LL/A?

  HI - it would be an update of the stock 5400 RPM, 500 GB HARD drive. The 7200 drive I bought is 1 TB.  Thanks in advance for any help!

  As long as it's a SATA HDD with a 2.5 form factor ", it will be compatible.  You experience a slight increase in performance with the faster HARD drive, but it will not appear in 50% faster than the 5400 RPM HARD drive.

  Ciao,.

  Addendum: There will be no observable heat problems.  I did it several times myself on all of my 4 Mbps.

• Problem starting Portege 7200 - stops running and the light flashes

  I have a portege 7200 with the docker dock 2 dvd, no problems until this weekend, when it stopped starting.

  its plugged into the power outlet and it starts the first windows 98 after the screen time, works my virus checker then the screen goes black, computer stops and the led on flashes.

  ive tried to boot from a CD, using the battery, reinstall windows, all I can think about

  Thanks for your help.

  Hello

  Have you tried to run the notebook without the docking station?
  If this isn't the case, then try it.
  Also, try to remove the battery for a while. Then try to start the unit only with the power adapter.

  But generally, if the LED flashes then this means that there is a hardware malfunction.
  The flash code can only be read by the authorized service partner. Guys are able to find the hardware failure.
  Well well, in this case, if the procedures described above don? help I recommend you contact Toshiba service partner in your country.

  Good luck

• Portege 7200 multiple problems

  Hello

  It is my last ditch attempt to try and get some sort of difficulty for my Portege 7200.

  I will try to explain as best as I can, so this is.

  I had a system dual boot (Linux & Win98), did not want Linux HD so formatted and reinstalled Win98.

  Everything works except for a few problems that I hope you guys can help with.

  1. at startup (before windows logon) I am invited with cannot find VREDIR. VXD and a few other VXD files.

  2 screen dislikes the adapter PCI/AGP of Trident Cyberblade e4-128. Only the driver installed, that followed the instuction on the Toshiba tools and utilities cd-rom. keep getting invited to change my display at startup configuration. Once logged into windows screen does not match the entire screen (black border). Have used the companion disc one receives with the Portege to stretch the LCD. The screen is bigger, but the display quality is bad.

  Can anyone help as I am at a loss on any one of the above point.

  Kind regards

  Joe

  P.s. If there is more clarification or information then pls let me know and I'll try my best to get it.

  Hello
  most likely, these files are not at all. This message usually when these files become 'independent' in the registry, or when certain network/protocol device missing files.
  The problem with these files occurs generally when you install something in the network control panel that does not install correctly.
  If you have recently installed a network adapter or Protocol in your system, remove it and reinstall it.
  The IPX protocol is often also responsible for this message.

  Good bye

• Problem with hd satellite M40-155 (PSM40) & Seagate Momentus 7200 RPM

  Hello to all Toshibians,

  I recently upgraded from hd (origin: Toshiba 100 GB 4200 RPM) in my M40 - 155 (PSM40) satellite with a Seagate Momentus 100 GB at 7200 tr/min/8 MB cache.

  I work in the area of music production and after much advice I realized that I needed a faster HD to maximize the number of audio track (working on projects of audio tracks of 40 +).

  This Seagate hd has been installed in a computer pro shop.

  When you go to work, after you have reinstalled all applications, I noticed everything was surprisingly faster navigation, at the opening of the applications in CPU resources that I use for music production, BUT there, I had some real wicked behaviors of the computer: BEFORE the new installation of hd, I managed to open very large projects, I work currently on and AFTER the installation of the hd , I noticed the reading has been bit sluggish UNTIL I have NOTE WITH the AUDIO-APP OWN CPU METER THE CPU A VA WILD AFFICHANT QUICKLY CHANGE the VALUES OF the USE CPU 25 to 85% to 40% to 99% goingfrom NOT STOP CAUSING the INNACURATE READING.

  I tried ALL audio applications I need to see if it was not related to a particular program, but NO: the problem is general.

  (I did every possible scan with windows tools, my bios is up to date, I do not have the virus, there is still a lot of space on the disk, I defragmented the hd...)

  So, I have a HD quality much faster and decreases performance?

  I already e-mailed seagate, but am waiting for a response.

  This situation is urgent, because it is the only computer I have and use professionally on a daily basis.

  What could be the problem? Anyone of you has experienced a performance problem during the hd upgrade? Is there something I could do to fix this? Is there a program that could solve this problem?

  Thanks a lot for your help.

  Best regards

  saxophonick

  Hello

  Sorry, this is a very special issue.
  I can only suggest what's wrong or why it occurs.

  The fact is that the new HARD drive is much faster. In this case, the CPU must manage more data and processes.
  Well, I put t know if it helps to solve your problem, but I recommend you change some settings in the performance options.
  Go to control panel and system. Choose the Advanced tab.
  Check in the second Advanced tab that the use of planning and the memory of the processor is assigned to programs. In addition, you can check the virtual memory settings.
  You can increase virtual memory, or you can set it to the size of the managed system.

  Are all this advice, and you should try it but I m not 100% sure if this will solve your strange problem

• There will be problems if I upgrade the HD of my DV6 on a 7200 RPM drive?

  Pavilion DV6 Notebook computer

  Product number: A8U54EA #EBU

  Series: [content deleted]

  Are there gotcha or things that I would need to know if I wanted to replace the HD to the laptop with a 7200 RPM drive? Or maybe even a little bigger than the 1 TB drive that is already there...

  I was wondering as well heat - they should have put in a drive of 5200rom for some reason...

  Just a question for the moment - ensuring that there is no problem with him.

  MartinHooper wrote:
  

  Pavilion DV6 Notebook computer

  Product number: A8U54EA #EBU

  Series: private information - deleted

  Are there gotcha or things that I would need to know if I wanted to replace the HD to the laptop with a 7200 RPM drive? Or maybe even a little bigger than the 1 TB drive that is already there...

  Hello

  Yes you can. I can't find a bigger at this point. The reason: cheaper. Please do not share information on any forum.

  Kind regards.

• Optiare DVD - RW 7200 a ATA device problem

  I a year eMachine W3653 that will not allow the DVD - RW drive run, like others, he tells the there is an error code 10, I uninstalled the drive, restart, same thing, code 10 and I have the plus version and I can't find a way to delete or stop this code, I have an Optiare DVD - RW AD 7200 ATA device a , I went to the recommended web page but have not been able to know if we have a S - ATA or a P - ATA system, if I read correctly optiare Sony page since I have a 7200 is a P - ATA (?) and I should be able to re - load and upgrade the driver?

  Question: I noticed some time I could NOT the DVD RW drive to write anything onto a CD - RW, which I try toput some of the 2000 and the saw scroll patterns I have on a CD - RW, I could take the files that I have with me to attend art shows, I have not found a way of not only getting the player to work If I go to my computer, open the file it does not show the E drive or the DVD - RW drive anywhere, I have the entry four for removable disk and J for a flash,

  Any help would be appreciated

  Thank you

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• IOS VPN on 7200 12.3.1 and access-list problem

  I'm in IOS 12.3 (1) a 7200 and have configured it for VPN access. I use the Cisco VPN client. Wonder if someone has encountered the following problem, and if there is a fix.

  The external interface has the access-list standard applied that blocks incoming traffic. One of the rules is to block the IPs private, not routable, such as the 10.0.0.0 concern, for example.

  When I set my VPN connection, none of my packets get routed and I noticed that outside access list interface blocks the traffic. When I connect to the router through VPN, the router attributes to the client an IP address from a pool of the VPN as 10.1.1.0/24. But normal outside the access list denies this traffic as it should. But as soon as I have established a VPN connect, it seems that my encrypted VPN traffic must ignore the external interface access list.

  If I change my external access list to allow traffic from source address 10.1.1.0/24 my VPN traffic goes through correctly, but this goes against the application to have an outdoor access list that denies such traffic and have a VPN.

  Anyone else seen this problem or can recommend a software patch or version of IOS which works correctly?

  Thank you

  R

  That's how IOS has always worked, no way around it.

  The reasoning is to do with the internal routing on the router. Basically an encrypted packet inherits from the interface and initially past control of ACL as an encrypted packet. Then expelled the crypto engine and decrypted, so we now have this sitting pouch in the cryptographic engine part of the router. What do we with her now, keeping in mind users may want political route she is also, might want to exercise, qos, etc. etc. For this reason, the package is basically delivered on the external interface and running through everything, once again, this time as a decrypted packet. If the package hits the ACL twice, once encrypted and clear once.

  Your external ACL shall include the non encrypted and encrypted form of the package.

  Now, if you're afraid that people can then simply spoof packets to come from 10.1.1.0 and they will be allowed through your router, bzzzt, wrong. The first thing that the router checks when it receives a packet on an interface with a card encryption applied is that if the package needs to be encrypted, it is from his crypto ACL and its IP pools. If he receives a decrypted packet when it knows that it must have been encrypted, it will drop the package immediately and a flag a syslog something as "received the decrypted packet when it should have been."

  You can check on the old bug on this here:

  http://www.Cisco.com/cgi-bin/support/Bugtool/onebug.pl?BugID=CSCdz54626&submit=search

  and take note of the section of the security implications, you may need to slightly modify your configuration.

• 7200 / 7204 vxr LACP problem

  Hi guys,.

  I read this very old thread

  https://supportforums.Cisco.com/discussion/10937421/7204-VXR-LACP-problem

  And I have same isue... we have two Cisco:

  Cisco IOS software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 12.4 (4) XD10, VERSION of the SOFTWARE (fc2)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2007 by Cisco Systems, Inc.
  Updated Saturday 28 December 07 14:12 by karnagar

  ROM: System Bootstrap, Version 12.4 (12.2r) T, RELEASE SOFTWARE (fc1)
  BOOTLDR: Cisco IOS Software, software 7200 (C7200P-ADVIPSERVICESK9-M), Version 12.4 (24) T7, VERSION of the SOFTWARE (fc2)

  and

  Cisco IOS software, 7200 Software (C7200P-ADVENTERPRISEK9-M), Version 12.4 (4) XD10, VERSION of the SOFTWARE (fc2)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2007 by Cisco Systems, Inc.
  Updated Saturday 28 December 07 14:12 by karnagar

  ROM: System Bootstrap, Version 12.4 (12.2r) T, RELEASE SOFTWARE (fc1)
  BOOTLDR: Cisco IOS Software, software 7200 (C7200-KBOOT-M), Version 12.4 (4) XD, RELEASE SOFTWARE (fc1)

  Both this IOSes seems does not support LACP Protocol.

  Can anyone help with this? Maybe we need to update our IOS? Or we have no used way LACP on devices yet? Maybe we can use any other means to aggregate two links physical gigabit in a logical 2 Gbps link?

  Thank you very much.

  Hello friend

  I'm sorry to do this, but LACP is not supported on the platform of 7200, GEC (Gigabit EtherChannel) only manual/static configuration is allowed here.

  In addition, your IOS version is too old and is not classifiable and configurable since December 28, 2007. Please see the link below:

  http://www.Cisco.com/c/en/us/products/collateral/routers/7200-series-ROU...

  I hope this helps!

  Best regards :D

• Problems with Desktop Elite 7200, put in a windows domain

  Hello

  I have NIC issues with a brand new HP Dektop PC Elite 7200 W7P

  ... Everything fine after updating bios-> 7.11 7,08

  WOL now works too

• Compatibility issue with the Portege 7020 / display CT 7200 & docking station

  Hi guys,.

  I have some problems with 2 cell phones.

  1 is:
  I bought a 7020 used to replace the broken of 7200 screen. After having disassembled the screen, I noticed that the connectors have the same number of threads, but one of the terminal of the 7200's screen has more. 'no problem' I thought, and with patience I picked up the cable of the adapter of 7020 one put in the 7200.
  But when I turned it on I saw only the colored lines and squares: S: S
  If you want I can provide with the NP, if it would help... Even if I check the compatibility before ordering.

  2nd problem:
  Portege 7200 correctly recognize the docking station, while a few beeps before starting the 7020, and obviously it does not work with him. I checked on the toshiba site and the dock would be totally compatible!

  And for the end... Where can I find the bios updates?

  Sorry for my bad English, I hope someone could help me!

  Kind regards
  Francesco

  Hello Francesco

  You'll be really lucky if someone here can help you with these old models of laptops. I'm sure they have about 10 years.
  No manual maintenance and sufficient knowledge is not easy to help you with this replacement of the screen.

  This problem with docking station may be related to defective hardware. The two laptops are so similar, and two of them can be used with this docking station. How you can be sure that equipment is high on 7020?

  The BIOS updates are available on http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp, but as I can see for Portege 7000 there is no updated BIOS, just to 7020.

  If you wish, you can contact the nearest Toshiba service provider. they have manuals for maintenance for this old notebooks and allow you to provide accurate information on the parts you need.

• Update CPU Portege 7200 is available?

  Hello Toshiba-community!

  I have a Toshiba Portege 7200 with the following configuration:

  -P3 600 MHz
  -320 MB OF RAM
  -12 GB HARD DRIVE

  However, the laptop works well, but the processor is pretty slow.

  So I tried _upgrade CPU_ with a faster P3.

  My questions are:
  Is this possible?
  What are the requirements?

  A lot, I searched the internet but I have not found a solution for this issue.

  Do you have a? :-)

  Thank you very much in advance!

  Usually these improvements are not easy, and in most cases to possible and undesirable.

  In most cases the different CPU can result in problems with the BIOS.
  In addition, the higher CPU speed would produce more heat dissipation that could lead to overheating.

  That is why it s not advisable to upgrade the processor

• Portege 7200 does not recognize external memory

  I downloaded Windows XP on my 7200 Portege (with 256 MB external memory) and it worked fine. All of a sudden it started overheating and has been extremely slow. I reformatted the drive, downloaded XP again and it seems to work well, although slowly;

  However, he refuses to acknowledge the external memory and seems to work with internal memory of 64 MB only.
  Is this a problem of port external memory (hardware) or I can do something to fix this?

  Hello

  You suggested also that the laptop started to overheat.
  As far as I know it is possible that the cooling modules cannot cool the CPU and then the CPU does not work with maximum efficiency.
  You should check you cooling grids for dust and debris.
  You can try to use the vacuum cleaner to clean the fans. But be careful.

  The second possibility is a dysfunction of memory modules.
  Try to test with another.

• Portege 7200: DVD Dock stuck!

  I have a Portege 7200 with a DVD dock. After having docked and undocked several times without problem, the PC is suddenly stuck fast and catches will not move. Everyone had and solved the same problem please?
  Thank you
  Jane

  Hello Jane

  Do not have this good old classic, but I've seen several times. It's really hard to tell what happens there, but according to your applicant, I presume that there may be simply mechanical problem.