HP Phoenix h9 - 1215t: boot sequence

My PC will not boot from the CD drive, it always starts the HD.  The BIOS boot sequence is set to boot from the CD first.  The CD drives work, but are ignored by the configuration of the BIOS boot sequence.  It does not even boot from the recovery CD HP can I bought 7.  I tried some other boot floppies that work on other computers and disks aren't the issue.  There is another configuration of the BIOS that need attention?  It will be a major problem if it becomes necessary to reinstall the OS if the hard drive is replaced.  Motherboard is a 2AD5 from Pegatron and FRIEND 7.15 BIOS 02/07/2012.

I have two other computers, a printer, HP and Dell, and both of them have the boot sequence of the BIOS on the priority CD player.  If there is a CD bootable in the drive at startup, computers that recognize and started automatically from CD drive without pressing a button any.

The computer HP Phoenix poster briefly notice at startup press ESC to display the start menu.  I ignored it because I assumed (should not have done that) the Phoenix would respond according to the sequence of the BIOS boot that has the CD-ROM drive as the first boot device.  The start menu allowed me to select the CD ATAPI drive inherited to start from.

Lesson learned and problem solved, thank you.

Tags: HP Desktops

Similar Questions

  • Satellite A40 - boot sequence problems

    Hello!

    I just bought a used Toshiba Satellite A40. He had a almost crashed Windows XP is installed. I'm trying to put a new copy of Windows XP on it, but I can't boot from the CD. By pressing the done nothing F12 key and when I access BIOS (v. 1.50), I can't change the boot sequence. The only things that I can access are the date and time. Help, please!

    Thanks in advance!
    See you soon!

    Hi moldovanvali,
    long story short - long said...
    -charge the battery fully
    -Start computer laptop game + time and date +.
    -Restart and load setup defaults + +.
    -change the boot for odd sequence +, + cdrom + or similar
    your system should now boot from the cd without pressing on + F12 +.

    If it does not start on cd/dvd maybe the optical disk drive is not able to start...
    There are many reasons for this...

    BTW: without entering a date and a time when the system starts only pressing on * F1 * (most cases)

  • For Satellite Pro M70 boot sequence

    Issues related to the:

    1. What is the default setting for the boot to the Satellite Pro M70 sequence?

    2. What is the procedure for changing the boot during the start-up phase sequence?

    3. What is the most 'sensitive' boot sequence, with & without an attached external floppy drive?

    Thank you
    AlanCB

    Well, I'm not 100% sure but I think the default start setting is:
    DISK HARD-CD/DVD-FDD-LAN
    However, you can set and change parameters in the Toshiba HWSetup that is located in Control Panel.

    Just FYI: by pressing a key during POST, you can choose the boot device.
    D - default system
    U USB FDD
    1 - disc HARD bed
    2 - slim select bay (if available) HDD
    C - CD rom
    N - network LAN
    P - PC HDD (PCMCIA) card

    But these options are not always available.

  • Portege R200 cannot set on the BIOS boot sequence

    Hi all.

    Our R200 entered mode of hibernation after that the battery power is low, then by some unfortunate twist of fate, the battery got deleted accidentally. Now it does not start correctly because every time it displays a BSOD stating Unmountable_Boot_Volume.

    I could solve this problem easily by disabling the hiberfil.sys file, which is the reason for the BSOD, if only I could change the boot order. Unfortunately, enter the BIOS, I am only able to access the first page where the only editable elements are time, date, and passwords. Pressing Pageup and Pagedn does nothing. The BIOS is updated to the last appearing on this site.

    Pressing F12 or F2 when the toshiba logo and icons appear does nothing no more. It's a HARD disk 1.8 "and there are no adapters available in our region. I can boot from a CD if and only if I take the HD. But then, it is useless since I can't fix it like that. It is not recognized if I it reconnect after booting. When I reboot, it does the BSOD thing again. It is becoming a frustrating cycle.

    I scoured these forums for other ways to boot from the CD and apply the suggestions, like hitting 'c', nothing helps.

    Any help would be much appreciated.

    Thanks in advance.

    Hi, the CWB
    What about the boot from usb?
    a stick with a live like bartpe or similar system...

    hard drive cannot be recognized once you have started your machine, because the boot when Initializes the hardware...

    the drive is correctly recognized by the bios?
    refer to the manual, it should there have listed the key combinations to start other devices...

    I think that the hard drive was missing...
    try to boot from sd card - * boot sequence settings must be changed in bios... *
    If you are not able to make this request a servicepartner...

  • Key to activate the USB on Satellite M70 boot sequence

    I have a Satellite M70 with Bootable USB connected on a USB key.

    "After cold start if I press F2 to select the boot sequence, a" + "sign near the HARD drive may be developed (such as a directory in explorer.exe) HDD / USBdevice by pressing the"Ctrl + Enter"."

    Then you can choose the HARD drive or USB key to start.
    But if I press F12, I had the same pattern as before (+ HDD) but 'Enter' or 'Ctrl + Enter '.
    does'nt put the HARD drive / USB stick but the boot disk HARD and Windows to start.

    My question:

    After pressing F12 key support to allow a start on USBdevice?

    Thank you.

    Hello

    Usually, if you use the F12 key to start up you can use up and down arrows to choose the right device and if you press ENTER the boot device will start.

    In your case it doesn't start t because you cannot use USB to start but the floppy USB drive.

  • Compaq presario cq61: change the boot sequence

    I have 10 Windows upgrade on my compaq Presario cq61 free. I want to do a clean install of Windows 10. I downloaded the tool of Microsoft Media, made a key USB and DVD containing the clean install. I am told that the use of the flash player, I have to change the boot sequence in the bios. I tried everything from ESC, all numbers F and LED to try to enter the bios and all have failed. Told me that all I had to do with the DVD was just put it in and start the computer and the laptop would boot from the DVD and I could make my own installation from there. Which also failed. The only thing I have not tried is downgrade to Windows 7, affecting Windows 7 back to factory settings, then reinstall the free update of Windows 10. I would not have to go through all if I mostly because I bought the laptop from a friend and it was installed at the factory of Windows 7 and I don't got no disc software to the computer so I don't want to screw up and drop windows 7 without the appropriate software reinstall to match the product key.

    Any help to enter in the bios or advice that could help me reach my goal would be greatly appreciated.

    Hello

    Here are some other suggestions.

    1. start the machine in Windows 10.

    Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

    In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close any open windows and stop the laptop by right clicking on the icon from the Start Menu, then select prompt (Admin) and click 'Yes' to the uac prompt.

    Type (or copy and paste) the following command (including spaces) and click Enter.

    Shutdown /s /t 0

    Tap on the ESC key as soon as you turn it on and see if it will now access the Start Menu.

    2 try to connect a keyboard external usb and see if this will allow you to access the Start Menu.

    Kind regards

    DP - K

  • S10 Boot Sequence

    I just bought an S10 with double SATA 250 GB drives and Vista Business 64. Apart from travel account that my collection of 25 years of the old DOS utilities no longer work (due to lack of Vista/Intel), I noticed that only 250 GB of total hard disk space has been reported. The second disc does not appear to exist at all.

    I have now correctly partitioned disk 2 and in format FAT and FAT32 and these volumes appeared as valid in Vista 64, but what I want to do is set up the drive with another OS (maybe XP or 2 K, maybe Linux or even BACK/Win98).

    I had no trouble installing an experimental BACK/Win98 on the second disc, but I don't see how to boot from that disk. If I boot from a suitable CD, Player 2 is presented as "C:", "D:", etc. and I can run in the BACK, but I can't boot from the hard disk directly.

    So here's the question:

    HOW CAN I INCLUDE MY SECOND SATA DRIVE IN THE POST F12 BOOT SEQUENCE?

    Any help (rather than derision to my secondary OS choices :-)) would be greatly appreciated!

    Thanks in advance,

    Brian


  • Sat L830-145 change boot sequence

    My old Tosh Pro 200 showed the BIOS options at startup, and you could press F12 to change the boot sequence. But myy new Sat L830-145 shows no option in the BIOS at startup and just starts in Windows 8.
    I found among the bloatware on the new machine, an installed Toshiba utility that is supposed to activate the start sequence be changed.

    So I used to put the USB at the top, followed by the optical drive, followed by the HARD drive.
    But it does not appear to have made all the difference. I have a USB key with Ubuntu installed fully on it that I wanted to start, but it seems not recognized (unlike when I use it on my old machine - so nothing wrong with the stick, or how it is configured) and continues just to boot to the HARD drive and Windows 8.
    Then...
    Anyone know how I can change the boot on this Satellite L830-145 sequence?

    Best
    David

    When Win8 running proceed to a complete stop. How to do this, you can check on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
    After doing this start your laptop and press F12 repeatedly to enter the boot menu. You, that you will find the possibility to enter the BIOS settings, or you can start a computer laptop choose which device should be the first boot device.

  • envy dv7: need to change the boot sequence in the BIOS

    I'm trying to get to the boot sequence settings in the BIOS and I forgot the administrator password. Trying unsuccessfully to Afgter 3, I get the message according to 50902428. Can you help me get?

    When asked for the password, try 45660408

  • How can I fix my XP do not go to Setup boot sequence

    Somehow I messed up my boot sequence and now whenever I start, he goes to the selection of the F2 to enter setup or F1 to continue.  It seems works continue, but of course, I have an error in something.

    My windows is XP

    Anyone have a suggestion on how to restore my startup?

    Doug

    The seemingly obvious solution is to hit the F2 key to enter setup and fix everything that is bad.  The BIOS settings are closely related to the motherboard and vary a lot.  Some allow re-scan devices and then save the setting.  It seems that there is a setting in the BIOS that the system doesn't seem to like when it starts.  You just need find and fix.

    HTH,
    JW

  • Vista boot sequence

    First of all, this is not a problem with dualboot OS since the answers I got do not help because either they do not know and feel that they need to type something
    or they can't read. I'll try to explain as simply as possible.

    When Vista starts it asks me what legacy to boot from (not the operating system) but the motto:

    HD
    SATA, which it starts the real
    DVD player
    Printer
    or leakage by default startup

    If I take the SATA, everything is fine and runs as well as it always has. I'm tired of having to choose each time.

    I tried;

    Reset in the BIOS boot sequence - they are all in parentheses which I know isn't fair but can find no option to change

    The Vista repair option install disc-do not ask again each time

    Guest/Fixmbr/fixboot or prompt Boot boot responds

    About 6 different 'Windows fix forums' nobody did allow that the answers are always the same: Vista repair option (each of them swear blood he will fix it)
    even after telling them that I've tried) explain how to dualboot OS has nothing to do with the question.

    It gets frustrating because this forum is the last of them, I'll try. The machine works great as it always has, but waiting to choose the currency

    is getting old.

    Hello spooky24,

    Your explanation is clearly a problem of hardware (BIOS) setting. This is not a problem of windows and the experts and volunteers here, will continue to try to help you! Since this is a unit built car, I suggest that you contact the motherboard manufacturer for help with their Board because they did, not Microsoft. Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • How to access the "Bios" in Vista to change "boot sequence.

    Every time I have to install a new program on Vista, the system won't re - start without the Vista installation disc. I need to know how to enter the "bios" to change the boot sequence. Thank you

    Hello

    / Configuration settings (BIOS/CMOS) often F2 start you so look at the screen - boot order should be set to
    Hard drive 1 for normal operation.

    Sound like you may need to run the repair of booting from the Vista disc.

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try Options recovery or a disk of Vista startup repair.

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Also from the command PROMPT on the Console (if possible) recovery or a Vista disk

    SFC/scannow
    Press enter

    and after that runs away

    Chkdsk /f /r
    Press enter

    (Spaces between C and / k and / and f and /)

    Retry (if necessary) after Chkdsk startup repair.

    I hope this helps.

    Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

  • XPS 8900 and Samsung 950 PRO Boot sequence problem

    I have a 8900 XPS with Windows 10. I have a Samsung NVMe 950 PRO SSD installed using a x 4 PCIe3.0 NIC - to-M.2 installed in PCIe SLOT on the XPS 8900 motherboard 3. I used Samsung cloning software to clone the OEM 1 TB HDD (immediately after you set up Windows 10 on it) for Samsung NVMe 950 PRO SSDS. Then I used the Samsung Software Wizard to install all the latest drivers.

    The only way I am able to boot from the SSD PRO 950 is to detach the HARD drive (which invites a Code of error Dell # 2000-0141 or something like that... no disc HARD detected). Seeing the Dell error at startup screen, I click on 'Continue' and Windows 10 boots perfectly fine (and very, very quickly). I just used my PC this way for a few weeks now. However, I really want to take advantage of the disk of 1 TB of extra storage space.

    When I plug the HARD drive and reboot, Windows 10 is loaded from disk (not the SSD) and I don't get the Dell 2000-0141 error screen. I pressed F2 or F12 at the Dell splash screen to go into BIOS to change the boot sequence, but I don't see that the SSD listed as a 'disc' or the source file for the start of Windows 10 controls... Shut down the PC, unplug the HARD drive and starting up, I get the Dell screen #2000-0141 again error (without HDD detected), click on 'Continue' and Windows 10, even once, start up normally on the SSD.

    Is it possible that I can use the drive HARD without the PC automatically boot from the HARD drive?

    Thank you!

    -Tyler

    First you need to download the latest driver of Samsung 950 NVMe (this is not included and is required) to you

    OEM HARD drive, then clone the drive.

    its about half way down the page.

    Then see if you can find it in the BIOS, I pulled out my HARD drive and its in the pile of gift, all SSD for my system. I'm sure that you can remove the secure boot and startup of the PCIe SSD.

    Please report your findings

  • Boot sequence

    I installed a new SSD today and have Windows installed on it (or so I think.)  But I don't know how or what to change in the BIOS to make the new shoe of road on its own.  It will start with my old active drive, but when I turn it off I can't start.

    Always include the exact model of PC and the version of Windows in your messages.

    Where you connect the cable of data SSD on the motherboard? Did you connect to where the HARD drive was originally connected (SATA0) or some other SATA port?  The boot drive must be connected to the SATA0

    Have you turned on the SATA port where the SSD is connected, if not connected to the port where the HARD drive is connected?

    Have you changed the boot sequence in the BIOS to first put the SSD?

  • Change the boot sequence

    Hi all

    I was wondering if anyone has a guide step by step (with pictures) on how to change the boot sequence (I'm not interested by a particular brand of PC or a particular Windows).

    Thanks in advance :)

    Adam

    There are a few different ways to access a page of options boot menu at startup

    Bios legacy would use the delete key

    UEFI BIOS would use F8

    Each you could enter the bios and select the or change the first device to boot cd / dvd drive is usually first "inline"

    Some uefi bios and or install uefi, you may enter win - 10 or 8 - 8.1 and turn off the quick start first in = power options change what the button of power before you could even get into the bios because of the characteristics of secure of the two of them start.

Maybe you are looking for