HP Photosmalr 7280 all-in-one. Card is stuck in the automatic document feeder

Similar Questions

• HP C6280 All in One Printer: unable to save the scanned document of multi page as on the single Document using the Preview on IMAC computer

  I recently reinstalled my drivers on my IMAC computer to correct some strange characters appearing when printing from Microsoft word via Parallels.  The relocation at this time and the time has fixed this problem.  My most recent issue is not able to save a scanned document of multi page into a document using an excerpt?  In the latest that I had to do was high brightness, scanned documents to be saved and presto, all were saved under one.  Now you have to go save each of them at a time.  If you have a 5-page document, you need to go through the registration process 5 separate time create several documents, which is a big waste of time.  I have also my C6280 DPL 100 size should be a problem, I think.  To correct even any help would be greatly appreciated.

  RG.

  Hi @RGrantB3,

  Welcome to the HP Forums! I'd love to help you analyze documents several pages in a single file. When you scan, you select PDF as the format scanning? When you select the PDF file, you should see an option to select, save all pages in a single file, or a variant of this option.

  If you do not see this, please post a screenshot of you scanning settings for I can visually identify the issue.

  How to take a screenshot on a Mac.         How to post a picture on the HP Forum s.

  I can't wait to hear back on your part. If this resolves the issue, please click Accept as Solution button below so that others can see what has worked for you. Thank you.

• C-7280 all-in-one driver to scan minimum drivers required

  Can simply load the base for the C-7280 all-in-one drivers to be able to use all functions of scanner?

  The base driver will provide all scan options:

  Technologies of analysis will be provided by the Windows, integrated scanning software that will not provide you any PDF or OCR scanning.

  So, you will be able to launch the scan of your computer only and not from the Scan printer button.

• 7280 all-in-one message says print cartridge alignment failed. see the documentation for the product?

  My 7280 all-in-one printer message indicates the alignment of the failed print cartridge.  See the product documentation.  I tried to do a literature search and landed on this link.  Where can I find documentation for my printer?

  This is the document that you are looking for.  You can find all documents and even more for your printer here.  Let me know what happens.

• How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  Have you looked at the site of Canon?

• PRI all-in-one HP Deskjet 2542: not the printer connected to the Modem

  My modem (wired LAN) password and the name was changed recently and now my printer (HP Deskjet 2542 all-in-one) does not connect to the modem.  The blue light just continuously flashes.  This is the only change that has been done to my modem and this is the first time I tried to print. It is printed on the front.  I called the cable company and they determined my modem was working fine and has suggested that to change my printer settings.  I grew up the printer instructions on my computer, but could not find something that I could change my settings to match the modem.  I think that's what the cable company told me to do.

  My printer is mod. # SNPRB - 1204 - 02.  If you need made more information let me know.  It seems that this should be a quick fix, but I'm not a computer geek.

  Hi @first100years,

  I'd love to help you connect your printer to your wireless network. The flashing blue light confirms without a doubt that, for some reason, the printer is is more set up.

  I found the following steps in this document: connect the printer after change of your wireless network.

  The HP software automatically collects the network settings by temporarily connect a USB cable from the printer to a computer that is connected to the new network. Follow these steps to reconnect the printer to the network.

• HP7520 all-in-one will not scan in the document

  I'm scanning very old recipe cards.  No matter how to activate the map, or when I put it on the screen, at least one edge is cut, including the automatic feeding system, which is my preference by train.  The cards are 3 x 5 or 4 x 6.  I can't find anywhere for this HP7520 the settings.

  Barbjth2,

  Welcome to the HP Forum.

  We know not if you want to scan in receipts in the form of images or text.

  Regardless of the end point, the following might help.

  With the complete installation of the software functionality for the printer and assuming a recent version of the Windows operating system, you should have the shortcut Wizard printer installed on your desktop.

  Double-click the Printer Wizard shortcut > scan a Document or Photo >

  Select Photo of Document OR file file (as you prefer) >

  This starts the process to create the sweep.

  On the side right of the menu, under the Scan size >

  Select, in the menu dropdown > any scanning area

  The rest of the selections can generally be left as default values, even if it's for you and your situation.

  • In order to ensure that the results meet your expectations, do not forget that the scan preview is CHECKED.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• Brother all-in-one does not work with the computer more

  After an automatic windows/XP download started what follows:

  All-in-one Brother takes control of the computer, but are not sent or computer will not receive the image to the desktop.

  Also, same unit will receive a fax and normally sends to the computer to the paperport, but now he sends (i.e. "connecting to PC" displayed on the LCD of the brother) to a computer but it can not be found anywhere; so lost.

  Measures taken so far:

  1. Uninstall and reinstall the Brother software, no help.

  2 brother support after an hour said that it is the computer not brother (I believe that good).

  3 System Restore will not work, it goes through the whole process, but said at the end that there nothing; Try again...

  4. in addition, conducted a deep scan for viruses etc, nothing found.

  Any ideas?

  You have posted to a group of Vista, but seem to be using winxp?

  What automatic download? Update history will show what has been updated

• I scanned the two elements of a brother MFC - 240 c printer all-in-one to computer. where can I find documents

  I scanned the two elements of a brother MFC - 240 c printer all-in-one to computer. where can I find documents

  Hello MichelleOZ,

  Items scanned by scanner are stored as Images (usually from the MPEG files) so I would look in the pictures folder. Otherwise if you remember what you call the files when you saved them you could also search for them via Windows Explorer.

  File photo:

  1. open Windows Explorer

  2. look in the folder list on the left side of the Windows Explorer window

  3. Locate the folder of photos

  Search:

  1. open Windows Explorer

  2. place your mouse cursor inside the Windows Explorer search box (upper right side of the Windows Explorer window), and then type the name of the file that you want to search

  3. Windows will now search for the file.

  4. once found, click on the file to open it.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  HP PSC 1610 ALL-IN-ONE(HOW DO I CHECK THE INK LEVELS)

  Hello

  Please see the links to check ink levels.

  Check ink levels

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c00257147&tmp_task=prodinfoCategory&CC=US&DLC=en&LC=en&os=4132&Product=390315&sw_lang=

  How can I check my ink or toner levels?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels

• All-in-one Photosmart C3150: stuck SD card

  I have the above printer.  When you try to load images to Picassa seems to have blocked the SD card too far into the printer.  It didn't load the photos and the SD card will not come out of the printer.  Please tell us how to get at least the card back because I need photos.  Thank you.

  Hey @silverngold92,

  I see you have a SD card stuck in the all-in-one HP Photosmart C3150 printer. To be honest, there is no support measures to help with the removal of this card. I would say that if it is large enough to hold the tongs into the slot, you can power off the printer and use tweezers to guide the card out of the printer. If it doesn't, the only other thing I can think of is to disassemble the printer. Because it is a consumer quality printer, there are no instructions that I can offer to remove the device to access the SD card.

  I would recommend that you give our queue of Technical Support service by phone call. The Technical Support queue can be reached at 1800-474-6836. Normally, when you contact our Technical Support queue, you will be directed to fill out a form to Contact support on the HP website. After that, a phone number and folder number will fill for you. However, due to the age of your printer your product displays as obsolete and not entitled to phone support. Please dial the number manually. When you hear the automated voice and invites you to revisit the site of HP to fill the Contact form, please ignore this. After 5-10 minutes your call will be routed to a technician. Please explain the issue to the technician to see what can be done to address this problem.

  I wish you good luck going forward with this!

• Want to 4500 all-in-one: Envy 4500 scanner on the internet

  At home, I have a HP Envy 4500 all-in-one printer / scanner. I can the documents sent by e-mail to hpepint and that works very well.

  But I'm at work in another city and you want to scan a document located on the 4500 feel like at home.

  Is it possible to scan a document on the internet?

  My phone app it won't unless it is connected to the same WiFi network as the printer.

  Ric

  Hello

  IAM afraid to said that the analysis can be done on the internet.

  The Mobile/PC device should be on the same network for the scan to occur.

• HP Officejet 4630 all-in-one printer print cancels in the workplace

  Hello
  
  I recently bought a HP Officejet 4630 all-in-one printer, and it automatically cancels the work in the middle of printing. The computer I use is a dv7 HP Envy with 64-bit Windows 8, and I print on a wireless network connection. My computer receives an error that HP Officejet 4630 series could not perform printing and the printer just says Cancel. I tried all the steps in the sections troubleshooting, both printing and network connections problems. I've uninstalled and reinstalled the software several times, I created a manual IP address and everything, but nothing seems to work. It seems also that the issue when using HP ePrint. It occurs in all sorts of programs and formats such as word, pdf and html. Unfortunately, I did not receive a USB cord, I can't see if that will fix the problem at all. I hope someone can help me with this, otherwise, it is obvious that there is a problem with the actual printer, I have had and I have to return something else.
  
  Thank you

   

   

  This is how I fixed it:

  1. Find out what IP address, is that your printer uses.
  2. Go to control panel, then click "View devices and printers."
  3. Look for your printer right click.
  4. Click on "Printer properties" and a new screen opens.
  5. Along the top, you will see some tabs. Click on the one that says "Ports".
  6. Click on 'Add Port '.
  7. Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port".  A new screen opens.
  8. Click "next".
  9. Type the IP address of your printer, and then click "next".

  Your computer should find your printer.

  Click 'Apply' and your printer should work fine.