HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

Similar Questions

• HP PHOTOSMART C4780: ALIGNMENT OF THE PRINTER

  I can't ALIGN MY PRINTER. IT IS VERY BLURRY AND THE COLORS ARE CORRECT

  Hi @MELROSE47,

  Welcome to the Forums of HP Support! I see that you are unable to align your HP Photosmart C4780, print quality is disabled. I see you are using the Windows 10 operating system. In order to better help you please let me the following information:

  1. don't you upgrade the software and drivers for your PS C4780 when you upgraded the operating system Windows 10?

  2. do you receive any error messages?

  3. do you have Solution Center on your desktop?

  I would like you to run printing HP and doctor Scan > www.hp.com/go/tools

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  What is the PSDR? If you still see the print quality on the large, start here: the problems of print quality .

  I look forward to hear from you.

  Thank you for being a part of the community of HP. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• HP Photosmart B109: cannot connect the printer to the wireless network

  I have some setting wrong my printer for wireless printing. It has worked well in the past, but with my new macbook air - this isn't.

  I can't access the function where to add the printer to the wireless network (my router does not support WPS so his password WPA).

  I remember setting this up on a PC - easy with the driver provided by HP, but on the Mac, the configuration tool does not appear to be a function where I add the printer to the wireless network - and HP did not provide a driver, because it is supposed to work with the mac built-in software.

  The manual says only: "follow the instructions on the screen", but the printer does not have instructions on how to connect - on-screen tests, only that it is connected...

  Anyone who knows how to add the printer to a wireless network?

  Hello @Joahkim!

  Welcome to the HP community!

  I understand that you have a problem to set up all-in-one printer wireless HP Photosmart (B109n) with your new MacBook Air OS x 10.10. I want to help you with this.

  Have you changed your router or your password since the MacBook Air? If this is not the case, your printer can still be connected to the network and the trickiest part of that place will be done for us already.

  We will print a Network Configuration report to see if it is connected:

  • On the Control Panel, press the button next to Scan. The Scan/Wireless menu.

• HP Photosmart 5520: cannot find the printer

  Until last night I only had intermittent problems, using the scan on HP Photosmart 5520 function.  Then all of a sudden not analyze or print work - message there.  MacAir displays the RED DOT printer offline, by default.  The printer has remained non-connected.  I restarted MacAir.  I have turned off HP 5520, unplugged the wire to plug in a normal machine (of an extension of protection against overvoltages).  On reboot I have always run.  I then tried wireless live - without success.  Then, I removed the 5520 HP of the MacAir intending to reinstall.  To attempt to reinstall Mac Air is unable to find a printer.  The HP 5520 wireless network test results show no problem.

  Please notify.

  Problem solved.

  I turned Mac Air, printer and router off and restarts.  It worked.  The problem was the router!

• IP address for LaserJet 4100N changed which resulted in "Impossible to connect to the printer" error

  I had the printer (HP Laserjet 4100N) and the computer (desktop Mac OS X Version 10.6.8) unplugged for two months.  When I enabled both, I wasn't able to print more.  The two are connected by Ethernet (via an Airport Extreme 802.11n) cable

  After printing the Configuration page, I noticed that the address of the printer HP JetSend is 10.0.1.8 now.  It used to be 10.0.1.5

  When I type http://10.0.1.8/hp/jetdirect, it is confirmed that the printer has a new address.  When I go to preferences on the computer, followed by Print & Fax, I see the originating IP address always.  When I go to options & offer, the originating IP address is present in the name and location boxes.  I thought that I could just change the IP address both of these boxes to the new IP address.  It does not work.  (BTW and URL never lpd queue name change 10.0.1.5 to 10.0.1.8).

  Then I thought that things would be solved by changing the new IP address to the former in the menu that appears when I look at http://10.0.1.8/hp/jetdirect. Which doesn't work anymore.

  What Miss me?

  Thank you

  Patrick

  It is resolved...  I went to the Apple discussion Forum and saw this:

  Regal909 , February 28, 2010 20:35
  in response to Chuck Stewart

  OK, this one is solved. In Print & FAX preferences panel, click on the button "+" to add a printer. Define the contextual menu Protocol to "HP Jetdirect - taken". In the 'Address' field, enter the IP address of the HP 4100.

  Leave the class 'tail' blank unless you use a print server. I'm not...

  Set the 'Name' field to what you want as a name for this printer.
  Set the field 'Place' to something that reminds you of where this printer is physically located.

  Currently, Mac has probably already found the printer by its IP address, select the driver appropriate for you, and so all you need to do is click the Add button.

  Good impression...

• HP Photosmart, can not sweep, the printer works.

  ProductName: HP photosmart C.4289, Internet Exploder, Windows Vista.

  Printer works but no scans, reason: Solution Center: react; No hp devices found.

  Actions:

  Download driver, 96% progress to stop and return. Signal: Irreparable mistake by installation.

  Analyze: Plugin HP Installer recovery does not work.

  Signal of microsoft / windows: there is a problem, why programming is not working properly. Closed programs, as soon as the solution is following is the available information.

  Scan of doctor: print, scan problem reg. Solution: download again.

  Microsoft solution: download again.

  conclusion: no result.

  I hope you can help me. Thank you.

  This message was not a solution, it is a correction. In the first mail of the number of the printer was incorrect.

• HP Photosmart Premium C309: problem installing driver for my printer (HP Photosmart Premium C309) on Windows 8.1 (64-bit)

  Hi I had a problem connecting wireless or Bluetooth.

  I tried to download the latest version of the driver software, but I get the following messages when you click on the installation and Readme file buttons. Can anyone help please.

  

  

  Hi @Lawds1,

  By your post, I see that you are getting the error "the specified file is not found. I'd love to help you.

  Please, try the procedure described in this document to see if it will help to solve this problem.

  HP printers - during the Installation of the printer to the point Windows 8.1, a Message "System cannot find the specified file" is displayed on the computer.

  You may need to perform a clean boot on the computer and turn off the temporary disable the Antivirus software. How to perform a clean boot in Windows. When running the installation right-click on the installation and run as administrator.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If there is anything else I can help you, let me know. Thank you.

• I get the message on the printer: error: failed to /Library/Printers/hp/cups/Inkjet6.driver/Contents/MacOS/Inkjet6

  I'm able to print a test page but nothing else. Other computers can connect to this same printer (HP Photosmart 8400 series) and have no problems printing. I use this same printer for almost two years on this laptop (MacBook Pro) and have never had any problems. Nothing has changed except that my roommate got a new MacBook and began to connect to the printer (we don't do wireless printing). Any ideas?

  What version of Mac OS X?  If 10.6 or higher, download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

• When I try to print from a web page (printing of electronic mail is fine), it is not 'preparation' and the printer error box comes up with "an unknown error has occurred while printing.

  Then the documents library box Monte showing *.xps file name. Help!

  Thank you both for your responses.

  It turns out that I uninstalled my printer and then reinstalled and also unplugged my USB cable to the printer for a short period. Now, I'm good to go!

• HP LaserJet M252n: The printer error

  There is an error displayed on the screen of the printer of 59.CO, I rebooted the printer and the error code is someone can point me in the direction of a resolution please?

  Hello @techrc, greetings!

  Thank you access the Forums from HP Support for extra support! I see that you encounter the error of printer on your printer Laserjet M252. I will do my best to help you with this problem.

  Is the error message "Error 59" or "error 49"?

  I suggest you to update the firmware of the printer to solve this problem. Please follow the steps mentioned below:

  • Make sure that the HP printer driver is installed on your computer.
  • Click on http://ftp.hp.com/pub/softlib/software13/FW_CPE_Consumer/Orion_SB/M252_Series_FW_Update-20160331.exe to download and run the firmware update utility.
  • Click the update button.
  • Select the printer that you want to update from the list.
  • Click the Refresh button on the dialog window. Follow the on-screen instructions to continue with the upgrade.
  • Do NOT power cycle the printer or the PC during this process or the printer may become unstable or unusable without further attention of HP. The firmware update can take several minutes to complete. Please be patient.
  • To check the update, you can print a configuration page. The configuration page of the current firmware revision in the product information section.

  I'll watch for your reply. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• 1102w: 1102w gives the printing error msg, but prints

  I had a hp p1102w for quite awhile and it fits perfectly our needs on our home wifi network.  One of the features that I use regularly is the double-sided printing.  About two months ago I started to have an error message "HP P1102 couldn't print (document name)", but the fine print.  I did a really worry about this until I tried to print double-sided.  Now the printer prints the pairs of sides, but I never message to put the paper and press to continue.  The printer and the computer just sat there looking at each other and nothing happens.  If I press the 'X' button, the error message is displayed immediately on the computer and the rest of the work is lost on the printer.  I downloaded and installed the drivers from HP, doctor of the HP printer software, searched the forum suggestions, tried a few suggestions that vaguely resembled my problem, active firewall and turn it on again and finally concluded that the printer was bad.  So I bought another.  I get the same problem, tried the same remedies and still get the error msg.

  My conclusion is that there is a communication problem between the two devices is probably caused by some windows update at some point.  Anyone have any bright ideas?

  Peace,

  V

  Hi @vneathery ,

  I see that you have problems with two-sided printing, print the numbers but you do not get a prompt for that flick. You bought another printer and have the same problem. I would really like to be able to help solve this problem.

  What application you are printing from?

  Try another application to see if you have the same results.

  Temporarily disable the Antivirus software and try again two-sided printing.

  Usually, when the driver does not communicate to switch pages, the printer blinks, by opening and closing the cover of the printer, it will continue printing. It acts as a resume button.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  How is the printer connected? (USB / wireless)

  If the printer is on a network, connect the USB cable to the printer and the computer and try to duplex.

  Let me know if it worked, that way we can exclude a communication network problem.

  Please let me know the results.

  Good day!
  Thank you.

• HP 2510 "Unable to communicate with the printer" error.

  Greetings,

  I recently bought a Deskjet all-in-one of HP 2510. I'm running on Windows 7 Home Premium 64-bit.

  When I try to print documents, the printer comes with the following error:

  http://i.imgur.com/uwK8MNq.PNG

  Try to use the print and scan tool doctor, I find a conflict report of driver:

  http://i.imgur.com/B9NCkTQ.PNG

  Thus, after following the instructions, I uninstalled and reinstalled as indicated (in taking very special care to make exactly as shown in the installation instructions). Errors still occur.

  I tried to delete the printer from the Device Manager, uninstalled the drivers of the various related devices out there, uninstalled the full software features using Add/Remove...then tried reinstalling again. I even tried to foregoing the installations CD and website (Yes, I tried both) and let Windows automatically installs the drivers. Always the same two errors original.

  It sucked to the top of my Sunday together. Someone saw?

  I managed to go today to get the USB power cord and it has indeed solved my problems. It seems that the USB cord that works with older models is not compatible with this printer, so that's been my problem.

  Fortunately, the new cord works perfectly and I was able to print two pages of perfect test.

  I apologize for my frustrated shattered earlier and thank you for your help.

• The printer error will not fade

  HP 1350 printer showing jam, it is clear and will be printed test page, remnants of the error and does not print. Printer has been restarted; computer has been restarted. Printer has worked very well so far.

  Hi, ChristineBecker,

  Try the following:

  Right click on my computer

  Select manage

  Click on Device Manager

  Click on the + sign next to the printer

  Right-click on the printer and select uninstall

  Click on the + sign next to the imaging device

  Right-click on the printer and select uninstall

  Click the + next to Serial Bus Controllers

  Right-click on the printer and select uninstall

  Restart the computer

  Windows will reinstall drivers

  Go to the manufacturer's website and search for updated printer drivers

  Message has disappeared?

  Start > type services.msc

  Scroll down and right-click on print spooler

  Select Properties

  Click on stop

  Wait for Windows to stop the printer

  Click Start

  Wait for Windows to start the printer

  Under Startup type, select automatic

  Close this window

  Shutdown computer

  Unplug the cables for printer from the computer and the printer.  Wait 5 minutes and reconnect them to the.  Turn the printer and the computer.

  Message is now gone?

• Installation of the printer. error: "printer spooler does not.

  Original title: printer Installation

  Windows XP SP3 home edition:

  Software printer installation error message, "printer spooler does not" no printer is installed or deposited.

  This suggestion can help.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell

• Is no longer able to print on a network HP 6310 printer - printing error (works fine, now the printing error returns)

  Was printing fine, no problem, then had problem with printer HP 6310 showing as offline while he was online
  Fix this problem by unchecking the box SMTP on the printer port.
  Now shows that it is printing, but after a minute or so, it returns an error ("error printing")

  Interesting, when I try to cancel the document does not print, I have to click Cancel to remove the document - the first time I get a "send error" - the second time, the document disappears.

  • I am running Vista home Premium (64 bit) on computer laptop Dell Studio 15, updated with Service Pack 1.  This error has occurred even after a cold reboot.

  It worked very well - I think that the original problem (printer showing as offline) happened after a hibernation, but problem now Vista think it's printing (after turning off SMTP setting on the printer port), but it's not.

  Hello Ibusby2000,

  Thank you for using the Microsoft Answers forum.  I suggest to go to the manufactures website and download the latest drivers and or updates.  You can also remove the printer and add it again.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.