HP Photosmart 3310: HP Photosmart 3310 Solution Center

Similar Questions

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• Photosmart C5580: Solution Center

  Had trouble scanning to Quicken 2014.

  Always Solution Center uninstalled and reinstalled with the CD supplied with the printer, then put updated by internet.

  My problem is the CD of the Moose is missing and I'm unable to locate the program on the HP website.

  Any help would be appreciated.

  Hi @DanlBoone,

  Welcome to the Forums of HP's Support. I understand that you cannot find the software for your Photosmart C5580. I would like to help.

  The HP Solution Center is part of the complete package of features printers. This link will help you get the right software. Software and driver for: printer all-in-one HP Photosmart C5580

  If you need help more made me know.

• PHOTOSMART C4580: SOLUTION CENTER WRONG FUNCTION

  I can't access the solution center to change the print setting. An error message reads ' error in C:\Program HP analysis-Imaging\bin\hpqscloc\1033.xml. I uninstalled and reinstalled at least three times makes no difference can someone help please.

  Hey @SANDY6,

  Welcome to the Forums of HP Support!

  I understand that you get the message "Parsing Error... 1033.XML' when accessing the HP Solution Center software on your computer in Windows 7 for your HP Photosmart C4580 all-in-One Printer. I would like to help you today with this error message. Appears not to be a conflict between the HP full feature software and driver for your printer and your computer package. Can I please you follow the steps below to resolve this issue.

  If you have a USB cable connecting your printer to your computer, please unplug this cable now.

  Step 1: Remove temporary files:

  1. Click on the Start menu
  2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
  3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  5. Close the Temp folder when it is empty
  6. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 2: Run the uninstall of level 3:

  1. Please click here to download the package full feature software and driver for your printer

  2. when the download is complete, please allow it to run

  3. an extraction should now take place. If the installation window opens automatically, please close it. You do not want to run a facility.

  4. click on the Start menu

  5. in the "search programs and files" box located just above to start after you click it, type %temp% , and press enter on your keyboard

  6. when the opening of the Temp folder please locate the 7z... file. Double left click on this folder to open it.

  

  7. left click on the Util folder to open it

  

  8. left click on the CCC folder to open it

  

  9 locate the Uninstall_L3 file at the bottom of the file. Double-click it to start the uninstall program.

  

  10. where the uninstall program launches, click continue.

  

  11. follow the prompts on the screen to complete the level 3 Uninstall. Restart the computer if prompted. Once the uninstall is complete, proceed to the next step.

  Step 3: Run a disk cleanup:

  1. Click the Start button to open Disk Cleanup . In the search box, type Disk Cleanup, then, in the list of results, click on Disk Cleanup.
  2. In the drives list, click the drive you want to clean (drive C), and then click OK.
  3. In the dialog box disk cleanup, on the Disk Cleanup tab, select the check boxes for the types of files that you want to remove, and then click OK.
  4. In the message that appears, click delete files.

  Microsoft: Delete files using disk cleanup

  Step 4: Install the latest Version of Adobe Flash:

  Please click here to download and install the latest version of Adobe Flash Player. Once the last version has been installed, please proceed to the next step.

  Step 5: Install the device:

  Please click here to download and install the drivers for your printer, once more. Once the download is complete, follow the prompts on the screen to install your printer. If you are using a USB connection cable please do not connect the USB cable until the installation program invites you to. Once installation is complete, please try to access to the HP solutions Center to check if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• HP Photosmart C7280 solutions Center does not work after Windows 7 32 bit upgrade

  I recently updated my operating system from Windows Vista to Windows 7 (32 bit).  Before the upgrade, my C7280 worked fine using the center of Solution and in my home wireless network.  After the upgrade to Windows 7 and download and install PS_AIO_02_Net_Full_Win_WW_130_140.exe, version 13.1.0, Solution Center does not work.

  At the opening of the solution Center, it displays disconnected printer.  Using the Wireless Setup Wizard, the printer connects to the network.  I can open the Solution Center and it works very well for about 3 seconds and then goes to the printer disconnected mode.

  I uninstalled and reinstalled the software update for Windows 7 package C7280 repeatedly and with the same results.  I downloaded and installed the patches and still no change.

  I finally had to restore my computer to original operating system.  After the computer back to its original configuration, I used the original to HP Photosmart printer disk to reinstall the driver for Windows Vista.  Everything worked as before.  Then I ran the Windows 7 Upgrade Advisor.  Yet once, he told me that the HP Photosmart C7280 printer was not compatible with Windows 7.  I uninstalled the printer driver and run Windows 7 upgrade advisor.  This time, I have not received any message about the C7280 printer.

  I installed upgrading to Windows 7 (32-bit), and then upgrade the HP Photosmart C7280 for Windows 7 32-bit driver.  Everything works fine now.

• Photosmart D110A: Solutions Center HP

  I got HP Solution Center on my computer for at least 18 months.  All of a sudden, it doesn't work because it says that the device is not over.  I uninstalled and reinstalled.  Still the same message.  The printer works - wirelessly!  I know that it is connected.  Why the Solutions Center does not work?  The Solutions Center is on my desk - but it does not work.

  Hello

  Thanks for your comments.

  Could you just uninstall and then reinstall it again?

  Thank you.

• HP Photosmart B110a: Solution Center does not open

  Hi, I am unable to open the solution center to scan, I can print ok and when I run the diagnostic tests and conduct the analysis test, it works well, but unable to do so through any other medium, please help, it's my head.  Thanks in advance.

  Hello

  Thank you for using the forum.

  You can find the solution here:

  http://h30434.www3.HP.com/T5/printer-software-and-drivers/HP-Solution-Center-fails-to-launch-cannot-...

  Find the relevant video below that shows you how to "uninstall Windows 10 updates" and also "Hide updated" to prevent Windows to install the update in the future!

  Windows 10 - How to uninstall & hide updates

  https://goo.GL/3tWxyA

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• Photosmart C4795: Solution Center cannot run because your installation of the device is not complete

  Months after HP software reload to correct a mistake, I lost my HP Solution Center during installation.

  Today, I ran the utility HP Print and Scan doctor and downloaded the software to install the HP Solution Center, but the following error message:

  HP solutions Center can not run because your device installation is not complete.

  I want to set up a wireless printer connection.

  Appreciate your help.

  Jean,

  It was quite a process, but everything seems to work well!

  I just rebooted my laptop, and now I have the HP Solution Center!

  The error message that I mentioned in my previous note seems to have disappeared (I hope never to reappear!).

  The question that light that I see is that the HP Support Assistant is always located on my taskbar.  How can I get rid of this?

  I can't thank you enough, John, for all your help and advice!

• Photosmart C4588: Solution Center missing hp C4588

  Hello

  I recently installed the latest version of the software for my printer from the HP site. Post, the installer HP solution Center disappeared. Please help.

  Kind regards

  Rajat

  Hi Rajat24,

  Welcome to the HP Forums.

  I see that you have a problem with the installation.

  Please click on the following link for "this program might not have installed correctly"

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• Photosmart D100a Solution Center Software

  Product name: HP Photosmart D110 series

  I installed a full blown Windows 7 Edition family on XP. I have download the drivers for 7 etc etc...

  But for the life of me where I can find the downloads for the Center Solution that regulates the parameters for the scanner, the ink levels and printer page files... PDF Bitmap etc. ???  Joe

  Hello

  Please install the following package:

  http://ftp.HP.com/pub/softlib/software11/COL32503/MP-80511-1/PS_AIO_07_D110_USW_Full_Win_enu_140_126.exe

  Kind regards.

• HP Solution Center will not install

  I installed the F4180 Deskjet on my Windows 2000 computer.  Printer works fine but I wanted to check the ink levels and could ' t find the HP Solution Center software.  No registration under program files.  So I released the CD and tried to install again.  There was never an indication that he was installing the Solution Center or HP photosmart software.  So I clicked on run and entered in D:/Setup/SolutionCenter.  It finds the file solutioncenter.msi and a list of zip files that are identified as central to solution.  I have dbl. solutioncenter.msi-click and I get the message "Setup has encountered an unexpected error installing this package.  This may indicate a problem with this package.  The error code is 2732. "So I uninstalled everything and only reinstalled under mode in advance where I am supposed to be able to approve all items being installed.  Well it has finished installing and the last screen said there may be additional screens that appear to guide you through the intstallation of additional software.  No screens never not appeared, and I still haven't installed HP or HP Photosmart software solutions Center.  The CD is damaged?  How can I get this software?

  Thanks for your help.

  The Solution Center will not install on Windows 2000. It is not a bug/problem, but that's just the way it was designed (don't ask me why). If you need to check the ink level, then you have to go to the Toolbox of the printer on the printer properties page.

• Photosmart 3310 printer: HP "Solution Center" can't find printer Photosmart 3310 on local network

  Hello

  My printer Photosmart 3310 scanner was working fine, but I recently had to reinstall the HP Solution Center software.

  Now the solution Center can not find my printer on the LAN.

  • I can connect to the printer via its IP address and see all the information about the printer and scan
  • Printing and scanning doctor can find the printer
  • Windows can see the printer and print

  But the HP Solution Center can not find the printer to install it, even when I type the IP address of the printer in the 'wired network' installation part of the Setup program.

  I used the latest version of the HP Photosmart and Officejet full feature software and drivers (August 2015).

  I don't know what else to do to try to get the HP Solution Center to find my pronter, I disabled the firewall, I tried to connect wireless and USB, but nothing seems to get the solution center to recognize my printer.

  Any suggestions?

  Concerning

  Hello

  Published on the website of HP software seem to be evil and not one used for your printer.

  I have notified HP to get this fixed number

  Run the installation once more and select uninstall to remove it from your PC, then restart your PC.

  Finally download and install the following software, it's good:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  See you soon,.

  Shlomi

• Win 8 - Photosmart c4580 not scan with HP Solution Center lack wifi

  HP Photosmart c4580

  8 64-bit Windows

  My printer is Photosmart c4580, and I have Windows 8 64-bit operating system.

  I can print throw my wi - fi connection, but I can't scan.

  If I want to analyze I need to plug the usb cable (10 meters long, because the printer is in the other room).

  I want to see the level of ink and I can't because I don't have the win8 HP Solution Center.

  Try to install the drivers win7 and Solution Center (PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe) (propriety - win7 run mode), and the program crashes.

  What can I do to scan using my wifi connection and installation of HP Solution Center

  Thank you

  Everything is ok now with the new drivers.

  Thank you

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109997-1 & CC = UK & DLC = in & LC = on & os = 4132 & Product = 3418707 & sw_lang = El

• Photosmart C410A: HP Solution Center install on 2 PCs for the same printer

  I have two PCs running Windows 7 Professional 64 - bit and a HP Photosmart C410A printer, wireless connections to my network.  The solution Center has worked well on the first PC, it was installed on.  I tried to install it on my new PC, but I get an error on USB hardware and software; It will not attempt to connect and install wireless.

  My question: can you run Solution Center HP of two different PC for the same printer Photosmart C410A?

  Thank you.

  Yes,

  You can install the HP Solution Center software on several computers connected to the same netowrk as your printer.

  Try following these steps to solve the USB error during installation:

  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• Photosmart Plus B210a will not touchpad as missing HP Solution Center scan

  Hello

  I'm on Windows 7 Professional 64 bit

  I have a Photosmart more B210a

  For 18 months he has been fine, but now the HP Solution Center disappeared.

  I tried to uninstall and reinstall.

  I did both the original disc and then using the software "full feature", but the Solutions Center is nowhere to be seen.

  I use the wireless printer and everything works except that I can't use the touch pad to analyze, because there is no way I can activate it.

  So, how can I get the HP Solution Center - please, do not say reinstall as I did 5 or 6 times using the drive and the software PSB210_231.exe.

  Thank you very much

  Mike

  Thanks again

  I'll try that as soon as I get home

  Mike