HP Photosmart 5520 - how to set printer preferences to print at 100%?

Photosmart HP 5520 - how to set preferences to printer to print my documents to be 100%? Both single-sided and double-sided documents?

I seem to get an effect of "reducing to fit", my smaller than my original document print output.

Make sure that it is set to no scaling

Tags: HP Printers

Similar Questions

  • HP Photosmart 5520 All in One printer cancels an order of copy of the glass

    HP Photosmart 5520 All in One printer & HP Pavilion dm1 Notebook PC

    I put a document on the glass of the printer to make a copy. The command is recognized, but cancelled immediately. The first two attempts were given a bit of text/photo about 1 centimeter.

    I used the doctor scanning HP and installed my printer again, but that has not helped.

    RodeDraak

    Hi RodeDraak,

    Given that the problem occurs when you run a copy, I hope that the problem is the printer hardware not the software on the computer.

    You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.

    Issues when connected to an uninterruptible power supply/Strip/surge protector power

    In this document, you will see,

    QUESTION:

    Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  • I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print all programs except

    I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print to all programs except the HP Image Zone. It shows the right default printer. When I print a photo 4 x 6 prints only part, and it is slightly enlarged. My operating system is Windows XP. Do you need any other information? Thank you. Peggy

    Hi PeggyOlson,

    It is an older program used with your 2570. Try to download and install the new photo software from the link below.

    HP Photo Creations

    HP Photo creation FAQ

  • Photosmart HP 6520 printer: hp photosmart 6520 cannot set print at 100% scale/size

    What CD jewel box impression label width and higth suddenly became smaller. It works perfectly until recently. Have uninstalled and reinstalled the printer and drivers, but I am unable to find how re set the scale to 100%. in this hp6520 Photosmart printer.

    Any help would be appreciated: very happy smiley:

    After watching your @dlddemonscreenshots, I see that you use the HPDD896C (HP Photosmart 6520 series), it is a driver not driver HP class.

    I suggest all first to remove this driver and add the printer again. In fact, I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server.

    1. in the folder "devices and printers".

    2. choose "print server properties.

    • Win XP - with no printer selected, click 'File' then 'server properties '.
    • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
    • Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

    3. click on the "Drivers" tab at the top of the window "properties of the print server.

    4. choose the printer that you want to uninstall, and then click 'remove '.

    5. choose "Remove driver only.

    6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

    If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

    Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer).  The installation screen and the software opens and you can click on connect a new printer.

    Once you have added the HP driver, try to print a label again and let me know the result. In addition, you may need to change ' borderless printing: Print with border ' borderless Print.

    Let me know how it goes.

  • HP photosmart 5520: how to change wireless network

    We change the network wireless to a new device

    How can I change the HP Photosmart 5520 for the new wireless device?

    How to configure laptop computers to print to the printer on the new wireless network?

    annax wrote:

    I looked through the user's guides, but could not find how to change printer to join another network wireless

    Can you please provide the steps

    I downloaded the manual and found your informtion on page 32 user's guide.

    http://support.HP.com/us-en/product/HP-Photosmart-5520-e-all-in-one-printer-series/5157533/model/5157535/manuals

    It's your support on the edit page and the connection of your printer.

  • HP Photosmart 5520, won't stop printing

    My new printer won't stop printing blank pages. HP photosmart 5520, install new. HP trouble tool finds nothing. It prints then stops, once again 30 seconds later impression continues to repeat this behavior.  Document request is empty. How can I fix this problem?

    Hello Big-Daddy-1956.

    Please retry the procedure which should solve the problem below.

    • Power off the printer and unplug all cables from the back of the printer.
    • on PC, START > run , in the run box type cmd and then click OK .
    • A command prompt will open.
    • In the type of commands in the command below and press Enter Key prompt window...
    • the sc config spooler depend = rpcss Press the Enter key.
    • Then, in the same window, type in the command below...
    • net stop spooler and press on enter net start spooler and press ENTER.
    • Connect the cables to the printer and the printer now start printing, this should work.

    Kind regards
    Jabzi

    Help the community by marking this post.
    Your question has been answered? Mark it as a accepted Solution!
    See a great post? Give it a Bravo!
    I work for HP

  • HP Photosmart 5520: HP Photosmart 5520 suddenly will not print or scan

    Suddenly is no longer able to scan or print on HP Photosmart 5520. With the scan function I use scanning to e-mail, but, after long 'Preparation scanning' on the screen of the printer, the error message "temporarily unavailable.  "Please try again later". With the impression that I use Google Cloud Print (from an Acer Chromebook) and all that happens is that the demand to print everything ends up in a queue of print jobs.  No error message appears on the printer screen. The copy function works fine.  Wireless network printing results are very good.  The printer worked fine for over a year.  Can anyone help?  Thanks in advance.

    Thanks a lot for taking the time to answer.

    It's all very mysterious, but it seems to have corrected itself.  Finally, the 'out of paper' error message appeared yesterday (there were many), I pushed in the paper and things started to print again.  I was also able to rescan.  Not sure if she was no longer a problem of Google or what but we are in service again.

    Thank you very much!

  • HP Photosmart 5520: cannot find the printer

    Until last night I only had intermittent problems, using the scan on HP Photosmart 5520 function.  Then all of a sudden not analyze or print work - message there.  MacAir displays the RED DOT printer offline, by default.  The printer has remained non-connected.  I restarted MacAir.  I have turned off HP 5520, unplugged the wire to plug in a normal machine (of an extension of protection against overvoltages).  On reboot I have always run.  I then tried wireless live - without success.  Then, I removed the 5520 HP of the MacAir intending to reinstall.  To attempt to reinstall Mac Air is unable to find a printer.  The HP 5520 wireless network test results show no problem.

    Please notify.

    Problem solved.

    I turned Mac Air, printer and router off and restarts.  It worked.  The problem was the router!

  • How to set my preferences to open the most recent catalog?

    I am running LR 4.1 with cab 7.1 on a 64-bit Windows 7 OS.

    aboutLR.png

    I set my preferences to open most recent catalog.

    LR prefs.png

    I then open a different catalog and do stuff in the catalog, but when I run LR next time he keeps going back to a different catalog. How can I change the settings so it opens either the most recent catalogue or I am guest for what catalog I want to open (I tried both) and LR can always open the same catalog.

    OK, I get it. But I have no idea why this should be the case. If it really bugs you are trying to replace your preferences file.

    The preferences file may be 'funny' and is then responsible for all types of weird behavior of Lr. It is somewhat a shot in the water. See this link to know how to replace your file preference: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

  • Photosmart 5515 - how to set duplex printing? and duplexing of the M/s word?

    I recently bought a Photosmart 5515 for my Mac.

    1. I want to set default printing as front / double-sided and need help because I do not see this as an option.

    2. I am using Microsoft word and can not select two-sided printing option - please can someone advise

    I trieds many forums, and it's a common problem. Any advice would be welcome, because I bought this to help reduce the amount of paper I use.

    Thank you

    Hello

    Follow the steps below to perform pprinting Duplex of Office for Mac:

    1. On the file menu, select print. The print window is displayed.
      NOTE: The print window might be minimized. Click the blue triangle next to the product model (Mac OS X 10.6) or the view details button (10.7) see all available parameters. To select the connection type click the lowest selection box - Copies & Pages.
    2. Select from the drop-down.
    3. Set the duplex option as liaison Long Edge (Portrait) or binding Long Edge (landscape).

    You can save the settings for later use by clicking predefined settings > Save settings as a preset.

    Kind regards

    Shlomi

  • How to set printing preferences? all my pages are printed in miniature when I use Firefox, and try to print from a Web page.

    I can't print from any Web page, including my hotmail account, without printing the page to about 20% of the normal size. If I use Explorer, I have no problem with printing.

    {Ctrl + P} in Firefox and open the properties of this printer - check the paper size setting.

    See this:

    http://KB.mozillazine.org/Problems_printing_web_pages

    If the paper size is correct, do the Reset described in this support article.

  • Photosmart 5520: How to print online?

    Hello

    We try to print from laptops 8 Win and Win 7.   We had the laptop Win 8 1 year, the portable Win 7 4 years and the pritner 2 years.  Questions have only recently begun.  We tried with the usb cable, still no go.

    Can someone explain why the other forums point to wireless issues?

    We cannot print directly connected with a cable, can someone explain why we can't print in this way?

    If I can not print with a cable, is there a setting on the printer that has been selected by mistake?

    See you soon

    Hello

    Download and run the utility HP Print and Scan Dr. link below to solve the problem.

    www.HP.com/go/Tools

  • How to set print 1st page first

    I just bought a HP Officejet 4632 and would like to know how to print the FIRST page is first of all, instead of the last page first.

    Any help would be greatly appreciated...

    First I clicked on "devices and printers" then I have the printer... right click and you click 'Printing Preferences' then the choice came to choose: HP Officejet J4500 series - HP Deskjet 9800 Printer - HP Officejet 4630 series - Fax - HP Officejet 4630.  My printer is HP Officejet 4632. Don't know why it is not listed, but a few nights ago an HP agent strives to implement (online) print 1,2,3,4 instead of 4,2,3,1, and never succeeded.

    When you follow your instructions, I clicked on HP Officejet 4630 and set of pages order before ot back and clicked on apply downstairs. I tested the printer and it still printed on the last page first.  The agent HP told me that this particular model could not be configured to print in an order any without putting him on any other HP printer that WOULD print 1 page first. I think this is where the different versions came when I right click on the printer... Should the computer is turn off and on for first page first which will come into force?

  • How to set printing without margins magin

    How can I set up printer to print a small MA on double sided page and also how to make boarderless photo prints?

    Hello

    Right, your printer supports without borders. You can set without borders as default and it will automatically notify you when duplex printing. Please use the following steps (for Windows):

    b click on the printer icon,

    b click Set suggestions,

    (c) click on advanced, then look at the end of this menu.

    d select borderless printing from the drop down menu,

    e click ok...

    Kind regards.

  • Microsoft Word for mac how to set print quality

    Microsoft Word for Mac 2010

    MacBook Pro 2012

    El Capitan

    How can I change the print quality for a document using Epson Workforce 3640?

    Try to display Microsoft Office for Mac forum.

    http://answers.Microsoft.com/en-us/Mac

    Also, what do you mean by print quality?

    What printer?

Maybe you are looking for

  • Topic rejected?

    Make a normal theme and I sent to the Firefox themes section. In the reception of the confirmation, I rejected because of some bad alignment, as in the email: "Problema di accordare con L'immagine della tested." or (translated): "With the image of th

  • iPhone 5 s - no access to the camera to lock screen

    iPhone 5, iOS 8.4.1 Don't try to drag the icon of the lock screen camera to take a picture - the gliding camera icon, but I left with just the display of the home screen - access no camera. Camera works fine when the code lock is entered and access c

  • Cannot access the windows installer

    try to install itunes and other windows updates and I get error 643 on updates and cannot access the windows with itunes installation programs.  Is there something blocking these files that they do not work

  • How can I change the order of the files in a folder?

    I do a presentation and need images that I recorded in a certain order, for the person who is them projecting on the flow, but whenever I try to save a new order that goes back to the moose.

  • broken recovery disk

    I've had my laptop for quite a few years now, its an OLD dell latitude D600 and I want to format and have a clean install for my little girl can use it for school work but the recovery disks have been damaged and put in a cell a few years ago. XP Pro