HP Photosmart 5520: HP Photosmart 5520 not shall be connected to the network or print.

Similar Questions

• Photosmart HP 7510: hp Photosmart 7510 says it cannot connect to the network

  I can still print to the printer wireless to my computer, but when I try to FAX directly from my all-in-one he says that it is not connected to the network.

  When I check the settings, it IS connected.

  I had this printer/FAX/scanner for several years now and never had this problem.  I did not make any changes.

  I have unplugged it & tried... still can't FAX.  But I CAN always print it from my PC.

  Help!

  Hello @dtinstl!

  Thanks for posting on the HP Forums!

  Do to an eFax problem and some HP printers supporting the eFax service there is not much I can help in this regard.  I'll have to refer you to this post with instructions on what is done about this particular issue.

  Please see the message here: eFax explanation

  If you wish you can also contact our HP Cloud Services Department in this respect.  Please contact our Cloud Services at 1-855-785-2777.  If you do not live in the United States / Canada region, please click the link below to get help from your region number.  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• 5.5 ESXi host is not able to connect to the network

  I installed ESXi5.5 U2. But the ESXi host grab an IP address from the DHCP server. I tried givind static IP of my office network, but still unable to connect to the network. I checked the CLI, the vmnico of the adapter is in place. Why the machine does not have an IP address?

  I started this machine from the network (available in the bios settings) and observed if an IP address is required. Then, I started the server from the hard drive. Surprisingly, it took an IP and I could connect via the network.

  After that, I plugged this NETWORK adapter to a different location on the same server. I found the same problem (do not take IP). But when once again, I did the "Network Boot" thing, it took an IP address and now it works fine.

  What is average?

  Apparently, my problem is solved, but I still don't know the reason.

• Photosmart 7510 will connect is the network (mac) wireless

  Although already our Photosmart 7510 used to connect wirelessly to the network, it arrested recently, without a known cause. I've updated all the software. It is said on the printer that is connected to the network and print via usb cable but the computer says that it is not connected (or on any other laptops 3 mac at the office also connected to the network).

  As I said, I've tried updating all software and have tried to delete the printer via reset printing system by following the instructions on a previous post. However I now can't add the printer as was then ordered.

  The software used is

  Mac OS X Lion 10.7.5

  Any help would be great, printing via USB is such a pain!

  Thank you

  Hello

  Try unplugging your router to power for 30 seconds, plug it back in and look for any change.

  Also, try power cycling the printer.

  If it persists, reset the network settings and reconnect it to your network, you can find steps planned in steps 3 and 4 below:

  http://support.HP.com/us-en/document/c02948582

  So, you can try to reset the printing system and check to see if that can help you:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Try to add the printer by clicking on the sign more and check any change.

  If none of the steps above does not help, have you changed anything lately? a new router, etc.

• OfficeJet Pro 8625 not connected to the network - no active web services

  Just bought this printer and cannot get the active web services! Keeps telling me printer not connected to the network. Printing and scanning very well. It is connected via USB.

  Hello

  You need to connect the printer to a network in order to enable Web Services, those who will not work with a USB connection, such as those that require an internet connection.

  You can follow the steps below to connect the printer to the network and configuration for the ePrint printer:

  http://support.HP.com/us-en/document/c03721293

  Shlomi

• Avoiding PC not allowed to connect to the wireless network

  AA: For wireless in our establishment, we have access Points on all floors that are in turn connected to the main server PC.
  When I opened the "wireless network connection state", click 'Wireless properties', then select 'Security', it shows the following:
  Security type: no authentication (Open)
  Encryption type: WEP
  Network security key *.
  When the "Show characters" checkbox is selected, it shows the "network security key.
  Is it possible that this security key can be hidden and therefore not visible at all. This avoids computers are not allowed to connect to the network.
  All PCs are loaded with windows 7.
  BB: All PC's are connected WIFI and their IP 192.168.1.100 to 120 with the subnet mask 255.255.255.0 range
  I need to connect some of the connected WLAN PC also by a connection to the local network for networking with a Satellite Communicator for internet connection.
  Setting regarding address LAN IP for the PC, I can give them the same IP from 192.168.1.121 to XXX or if IP address
  address be 192.168.0.xxx
  Adv. kindly

  Change in WPA2.
  Put a password on that isn't easy to guess and is greater than 8 characters.
   
  The security key you are watching is on your computer - you have entered it or allowed him to be registered.  Except if you give someone access to that computer (or a similar) they will not be able to get to this part of the system to see what you see.  If you give people access to the use of these systems, do not give them administrative access - they must only use computers as * users *.

• Photosmart HP 5510: printer not connected to the network, although it

  Hi people,

  I am at my wits end with this and you are my only hope (what Star Wars quote).

  I have a HP Photosmart 5510, I've had around 2011.  I've always used it in the company of my iMac (OS X now on El Capitan). Over the last year or two, there was the strange number to which case when I open the HP utility on my iMac it says it is not able to connect to the printer and I should check that it is switched on (this is before you ask). This question seemed to resolve itself after a short while and there was no problem.

  However, I came to analyze some elements of the other day, and this same old issue again raised his head. I put my paper on the scanner and press the option scan only for the printer to tell me that there is no connected computer. Weird, I thought I had printed only some points the day before. I went to my iMac and open the HP utility to see my former favorite message that the printer was not plugged in blah blah.

  I went on HP website to see if there were new pilots required, which it was not (the last was for OSX Yosemitie!).

  I decided to try and start fees and remove the printer and re - add new. I deleted the printer, downloaded the latest HP deriver (just in case) and that's where everything went wrong.

  Software downloads, all right, it starts going through the installation process, end, then he gets to the selection of the device, issue. It evokes three devices that are my one and only printer (Strange I thought). Two with the "connection type" listed as Hello and the other with the connection type is listed as IP. I tried selecting each of these only for each of them to come back with the following error message:

  "YEAR error occurred while the communications device." Please make sure that the device is ready and try again." Well, if they hear by loan, circuit implementation, its connected to my network then YES ITS BLOODY LOAN! So I get no more on the process by the printer and HP Utility installation is nothing else than a large black plastic paper weight. I tried to reconnect my printer to my network wifi several times and everything is fine, its connected and there is no problems according to the page of "wireless network test results" print.

  What the hell is happening? Any ideas? Please save me before I throw this thing by the highest window that I can find.

  I'm not a computer expert and I'm certainly not a network specialist. All the advice is appreciated greatly and fortunately.

  Hey @Mvdarbs,

  Welcome to the Forum from HP Support. We're here for another help to get the most out of our products.

  Thank you for your message. I see that you experience the Mac-to-printer communication problems when you use the HP Photosmart e-All-in-one 5510 printer. All this happens despite your apparent WiFi connection. While it is no doubt frustrating to live when all you want to do is print, there are solutions that you can try and I hope that they will restore the regular feature.

  I recommend you try the following steps:

  (1) we will start over with the installation of your network printer. From the control panel press the wireless icon, and then select "Restore network Defaults."

  2) façade, run the "Wireless Setup Assistant." Reconnect to your home network and then make a note of the IP address.

  3) visit the printer embedded web server (EWS): this is done by entering the IP address of the printer in the address bar of the web browser and navigating to this address. If you have a security alert (as this page is not encrypted), click on to "Go forward anyway." If the page loads correctly, we can be certain that the network connection is real. While you're there, make a note of any error messages or status alerts (if you see it, it's all good) and don't forget to advise me on what you see.

  4) remove the printer from your Mac. If you are not sure how, refer to the

  guide for advice.

  one) (optional)-set a static IP address for your printer. Refer to this thread of @PrintDoc here: http://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/changing-IP-address-for-wireless-printer/td-p/445087 for instructions on how to do it.

  5) reinstall your printer: click here and install the driver that you are prompted.

  Please let me know the result of your troubleshooting by responding to this post. Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  See you soon,.

• Sun Solaris 5.10 - SSH 1.1.3 - Not able to connect to the server by ssh - Urgent

  Hello
  I am not able to coonect to a server by using the code below.
  
  If I try the same code on the server to connect it self, it works well. But when I try to connect to another server gives the error below. And I use the IBM Jdk when getting this error. Y at - it a setting to avoid this error.
  
  Error:
  INFO: Add /usr/jdk/instances/jdk1.6.0/jre/lib/ext/sunpkcs11.jar to the CLASSPATH of the extension
  ConfigurationLoader
  November 30, 2010 16:33:12 < clinit > com.sshtools.j2ssh.transport.publickey.SshKeyPairFactory
  INFO: Loading public key algorithms
  Error so that SFTP
  java.util.NoSuchElementException
  at java.util.StringTokenizer.nextToken(StringTokenizer.java:332)
  at java.util.StringTokenizer.nextElement(StringTokenizer.java:390)
  to com.sshtools.j2ssh.transport.AbstractKnownHostsKeyVerification. < init >(Unknown Source)
  to com.sshtools.j2ssh.transport.ConsoleKnownHostsKeyVerification. < init >(Unknown Source)
  at com.sshtools.j2ssh.SshClient.connect (unknown Source)
  at fileTransfer.connectToServer(fileTransfer.java:18)
  at fileTransfer.main(fileTransfer.java:56)
  
  
  
  Code:
  public static boolean connectToServer (String serverIp, int serverPort, String userId, String password)
  {
  SFC SshClient = null;
  try {}
  System.out.println ("inside the Try to like his SFTP");
  ConfigurationLoader.initialize (false);
  System.out.println ("ConfigurationLoader");
  
  SFC = new SshClient();
  SFC. Connect (Ipserver, serverPort);
  System.out.println ("SFC. Connect");
  
  PasswordAuthenticationClient pwd = new PasswordAuthenticationClient();
  
  pwd.setUsername (userId);
  
  pwd.setPassword (password);
  
  int checkAuth = sfc.authenticate (pwd);
  System.out.println ("checkAuth" + checkAuth);
  
  If (checkAuth == 4) {}
  System.out.println ("AuthenticationProtocolState.Complete");
  
  SFTP SftpClient = sfc.openSftpClient ();
  sftp.Quit ();
  SFC. Disconnect();
  }
  on the other
  {
  throw new Exception ("invalid user name or password for the user");
  }
  }
  catch (System.Exception e)
  {
  System.out.println ("Error While SFTP");
  SFC. Disconnect();
  e.getStackTrace ();
  Returns false;
  }
  Returns true;
  }

  Swapped

  Sun Solaris 5.10 - SSH 1.1.3 - Not able to connect to the server by ssh - Urgent

  @O.P.
  Don't, don't.
  In the future, to choose the most appropriate forum and make your post.
  Swap shall be the same as the rude spamming.
  I'm not aware of any web-site-of-value forum that would promote the permutation in its directions on the label.

  ... and for what is "Urgent"?
  This web site is for the end-user community gather and discuss various topics in general conversations. Your time constraints are irrelevant. If you need real support for something, then log a support case and pay for a quick response.

  See the FAQ in the link at the top of the page.

• My UK 6s iPhone does not connect to the network in Germany?

  My UK 6s iPhone does not connect to the network in Germany?

  'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

• Hello my iPhone 6plus does not connect to the network on the upper left side of the screen it ust say research

  Hello my iphone 6plus does not connect with the network on the upper left side of the screen it say research

  Have you ever tried troubleshooting mentioned in this article?

  If you cannot connect to a cellular network or cellular data - Apple Support

• My laptop, connect to the network, but not the internet!

  My laptop connects to the network media blank but not internet. My roommates using the network can connect to the internet. I tried various things but not vain. I also tried to get in touch with the Virgin on this subject, but they can help. Is it my laptop and is there something special I need to do with a computer hp laptop. Help, please! Thank you!

  Hello

  On the Start Menu, click programs principally made, click Accessories, right-click on command prompt and select "Run as Administrator".  In the prompt, type the following commands, pressing on enter after each command.  Include spaces in the commands, as indicated.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int ip reset c:\resetlog.txt

  netsh winsock reset

  Type exit and press ENTER.  Restart the PC and see if you can log in now.

  Kind regards

  DP - K

• Satellite L650-11R - not able to connect to public networks

  Hello.

  Although I am very satisfied with my laptop, I have a problem. I am not able to connect to public networks using ethernet cable to some location (not everywhere) with different laptops users have no problem connecting to networks of same that I can't, so I think that the problem is my laptop.

  I always get the error 'unidentified network '. I tried to replace the cable but the problem still remains.

  Any suggestions?

  It is not easy to tell what the problem may be, but it is certainly related to the firewall and network settings. Try to disable the firewall and check the connectivity.

  Try to compare the LAN settings with others who use the same operating system.

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• Unable to connect to the network and network adapter is not detected

  Hello, this is the first time I use a laptop ( HP Pavilion 2332se g6 ) and I installed Windows 7 Ultimate 64 bit. I cannot connect to the network (wired or wireless) and cannot connect to Wi - Fi.

  My problem is perhaps the same problem in this post in your forum, so I provide the same information. If it's not the same problem, ask the details you need.

  What I see in device (with hardware ID) Manager:

  • Other features:

  Bluetooth controller:

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3298 & CC_0D1100

  PCI\VEN_1814 & DEV_3298 & CC_0D11

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_O5

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  Network controller:

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3290 & CC_028000

  PCI\VEN_1814 & DEV_3290 & CC_0280

  PCI device:

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  PCI Simple Communication controller:

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  SM Bus controller:

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C

  PCI\VEN_8086 & DEV_1E22 & CC_0C0500

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  (USB) Universal Serial Bus controller:

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Unknown device:

  ACPI\HPQ0004

  * HPQ0004

  Hello:

  First install the chipset driver and reboot (will install the SM Bus controller).

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103010-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Second: Install the AMD graphics driver and restart.

  For switchable graphics in your notebook, you install only the driver AMD, which installs the drivers for the AMD and Intel for the graphical configuration has your laptop. NEVER install the Intel driver only or allow updates to the Intel graphics driver to install.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-111285-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Third: Install the audio driver and reboot.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104672-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Now, the rest of the devices can be installed...

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102604-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Network controller

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_119873_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Bluetooth controller

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_113004_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  PCI device

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102497-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  PCI Simple Communication controller

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102566-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  (USB) Universal Serial Bus controller

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102571-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Unknown device

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-116584-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results