HP Photosmart 5520 what e-all-in-one printer cannot print correctly

Printer: HP Photosmart 5520 e - all - in - one

OS: Windows 7 Home Premium

I bought this printer a few months ago and he has not really used. Before the problem happened, never nothing changed. Suddenly, it was question to correctly print the colored pages. I checked the ink level, all are still ok, I cleaned the printerhead according to the guide of this forum, problem persist. All of the ink and paper A4 size are of original HP. Here is the copy of the page of "quality control". Can someone please advice what's happened and how to fix?

Thank you!

The ink gauge is an estimate and is not accurate.  I recommend that you replace all cartridges with new HP brand ink cartridges and run the cleanup once utility cartridge.  If the print quality is not good, try to run the utility up to 2 times more.  The utility can help the ink flowing through the new cartridges.  Let me know how it goes.

Good luck!

Tags: HP Printers

Similar Questions

  • "Scan to computer" is not turn on Photosmart HP 6510 e-all-in-one printer B211a

    New user on that and I would be grateful for all the help I can get. I recently bought for the 6510 HP Photosmart e-all-in-one printer B211a to use with my Ipad 2. I've set up correctly, or so I think, I can print and copy, but I can not seem to be able to analyze anything send it to the Ipad 2. It says 'none found computer. ' I do not use the software to install and configure it up to the Ipad 2. How can I make the printer identify my Ipad 2, so I can scan? Help, please! Thanks in advance.

    Hello

    The front of the product allow you to scan to computers with the complete software installed only, such a feature not planned mobile operating systems.

    To scan from iOS, you can use the HP ePrint home & Biz, on the App Store application available.

    Then you can analyze by launching the application analysis.

    Kind regards

    Shlomi

  • Photosmart HP 7520 e-all in one printer - printer error

    The printer gives a not useful message. It says "Printer Error" and I have to restart the printer. Blinking text and all the four icons on the sides.

    Does anyone know this problem also?

    I just bought this printer and installing the printer the printer software is also updated.

    Thanks for your help

    Thanks for all the help.

    I returned the printer shop ro. They tested the printer and found no errors.

    I talked to a technical guy in the shop and he told me that my wifi router was the problem. I had to download the utility "inssider". as utility showed me that the channel of my router was on was very busy. I changed the channel on my router to a different channel and everything is fine after that.

    I hope I helped other people with this solution.

  • Photosmart C309n: Photosmart C309n TouchSmart Web all-in-one printer MAC OS

    I recently bought an IMac... I can no longer print both sides of the paper. I use it a lot and it is dri ving me crazy. Is there a driver or something I need to fix this. I don't know if there are other problems with MAC OS, but this one, I need fixed.

    Thank you.

    Hello @Cheryl75684 and welcome to the Forums of HP.

    I see that you are having problems printing double faces.  There is currently no HP software for this printer available to 10.10, so the printer runs the print driver based Apple.  The absence of two sided occurs in the Apple driver.

    Please let me know if you have any questions. Thanks for posting on the HP Forums.

  • HP Photosmart Premium C410b inkjet all-in-one printer

    I bought a HP printer on ebay, and said it was ok necessary ink I bought a full set of 5 new HP ink for the printer, but when I turn on and charge she inks original application implemented inks that I don't I can do.

    Sorry you are having this problem with cartridges installation. Yes, you will need for modules installation so that the printer to go forward.

    You can contact the HP Support (1800-474-6836) and get the cartridges setup. Unused cartridges can be negotiated through HP to get the right. For more information, please call the number.

    I hope this helps.

  • HP 5510 Photosmart e-All-in-one printer will be no. Longer Print black

    I have a Photosmart HP 5510 e-All-in-one printer and after replacement of a black cartridge empty with a new, the printer will print is darker. I tried all the solutions on HP Support forum.

    I have inserted a new black HP (not a photo black) cartridge, provided it was properly ventilated and put, ran the print head, smear routines and the alignment of ink. I printed the status report (funny because he's white with the exception of a few areas of color). I printed the report quality - the colors were there but not black. I even restored it to factory defaults.

    My WIN7 laptop has the latest HP drivers and wireless printer is turned on and connected, so I guess he can receive firmware updates.

    It becomes even more strange that if I print from a printer (that is, the crossword) embedded applications it print a grey color with muted where (probably), it would be black.

    The printer is 5 months out of warranty...

    I see that a few other people have had the same problem. Is that what someone has solved?

    The steps of cleaning cartridge Print 3 - 4 times.  Try now.

  • 7520 HP pHotosmart e-All-In-one: printer HP B209 failed, bought 7520 e - All - In - One... not as many preferences

    Recently, my B209a Photosmart is not printing black ink, so I bought a Photosmart 7502 refurbished e-all-in-one printer.

    1st problem: printing photos the size I want...

    When you type "Print-p", the menu that appears asking me to specify a layout (for example, custom, Best Fit, scale, etc.). When I choose "Custom" and specify the width and height I want, I can go in "Printer", then "Configuration", even if I match the width and height under paper and the Source size, it errors out and does not print because sizes do not match.

    2nd problem: when you print 'NOTHING' (letter or photo), there is not nearly enough printing preferences that I have with my B209a. With the B209a printer, I was able to customize almost every preference printing I wanted, including setting up my own (which was "printing black-fast"). I get none of these choices with this printer. Just about the only choices I get a 'paper source', 'paper size' and 'direction '. I don't even have the choice "quick print", which was supposed to use less ink.

    I am 'really' disappointed by this 7502e.

    All of my fault. For some reason, I took the photo paper I had in the machine has been of 3.5 x 5.

    It has been 4 x 6.

    I wa contacted by a representative from HP who told me I called a support agent.

    Once Mario's HP took over my machine and these changes, the pictures are exactly the way they were supposed to.

    Initially, I was not only very surprised to get a solution to the problems that I had, but to be sent by electronic mail and then called by a support agent to fix, just a few days. And to be informed that if the problems were not fixed, I replaced printer.

    This was among the best support I have ever received from 'none' company.

    Thanks to Jamieson, Alan and Mario!

  • 7520 HP all-in-one printer prints photos not good with my Windows machines

    I have several computers.  Everything works fine with the printer in the Windows environment.  I have an iPad and a MACbook PRO with Maverick 10.9.4.   The pictures are terrible when I print with one of these devices.   It looks almost like a negative image.   I checked for the drivers updated, etc. for the Mac.   The ink is HP and levels are good.  It works fine with my PC computers, but not my Apple devices.   I checked the preverences of the APPLE system.   It does seem that the photographs.  Text prints very well.  Any suggestions?

    Hello cpsimonand welcome to the Forums of HP, I hope you enjoy your experience!

    I see that you run in photo printing questions. I would like to help!

    I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

    Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

    I also run your Apple updates: OS x: Mac App Store apps and OS X update.

    After the updates, I recommend reinstalling the Photosmart HP 7520 e-all-in-one printer drivers.

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • HP Photosmart 5520 All in One printer cancels an order of copy of the glass

    HP Photosmart 5520 All in One printer & HP Pavilion dm1 Notebook PC

    I put a document on the glass of the printer to make a copy. The command is recognized, but cancelled immediately. The first two attempts were given a bit of text/photo about 1 centimeter.

    I used the doctor scanning HP and installed my printer again, but that has not helped.

    RodeDraak

    Hi RodeDraak,

    Given that the problem occurs when you run a copy, I hope that the problem is the printer hardware not the software on the computer.

    You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.

    Issues when connected to an uninterruptible power supply/Strip/surge protector power

    In this document, you will see,

    QUESTION:

    Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  • XP starts from the USP port to which is attached a HP Photosmart 5520 e-all-in-one printer

    After installing a "HP Photosmart 5520 e-all-in-one printer" on an XP wihe a USB cable, the system tries to boot from USB port to which the printer is connected then.

    Installation gave no problems.

    To then begin XP - PC, the printer turnof.

    The bootsetup: first is the HARD drive. Who can help?

    Hi, welcome to the Forums of HP!

    I understand that your office is the start of your printer, and I'd be happy to help you!

    I suggest turning off your computer and unplug the USB cable to the back of the printer. Once the printer is unplugged and turned off, please re - turning on the PC. Condition that the computer starts well, please follow this document on the updated the BIOS on the PC. Once the update is complete, please reconnect the printer (USB) and power back on. Once again, please turn off the computer and turn it back on.

    If the computer still starts at the printer, please disconnect the USB cable to the printer. Turn off the computer and turn it back on. That it starts properly, run your antivirus software to search for viruses. I also have to know product and model number of the desktop for further research.

    I would ask you re-post with the results of your troubleshooting, and I follow diligently with you!

    See you soon

  • HP Photosmart Premium all-in-One Printer - C309g dose it supports eprinting

    dose

    All-in-one printer, HP Photosmart Premium - C309g eprinting airprinter support

    Hello

    Great question, I have attached a link below that shows what printers support missions/ePrint AirPrint.  There is another option for the HP Photosmart Premium so depending on your model, which houses the ePrint and Biz.  There is more information on this subject on the ePrint link below.

    Good luck!

    http://h10025.www1.HP.com/ewfrf/WC/searchresults?tmp_product=HP+Photosmart+Premium+All-in-One+Printer+-+C309g & Product = 3793676 & tmp_qt = ePrint & CC = US & DLC = in & LC = in & Submit=.

  • Photosmart C5280: 5280 all-in-one printer front panel C does not

    I have a HP Photosmart C5280 All-in-one printer. I am able to print and scan through the software on my pc, but the buttons and the screen on my printer does not work. The screen is dead and nothing happens if I press the buttons. I lift the lid (the m crept about to change ink) for the printer start work before I can print. Please give advice on how I can solve this

    Welcome to the HP community @Anthony1707,

    I read your post on display problems you are facing your Photosmart C5280 and wanted to drop. My suggestion would be to try the steps that are in the article link below to see if they can help. If the problem persists, I think that somewhere there is an internal failure, and could then recommend contact HP directly to see what your next printer options. I'll leave their contact details below for you also.

    HP all-in-One, Fax and copy machine products - product HP off several times

    Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

    I hope this helps you!

    Contact HP:

    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number appear

  • 7520 HP photosmart e-All-in-one: printer Photo ink for all print jobs

    Why my printer uses ink cartridge photo instead of the regular cartridge for all print jobs? I need to change a setting? He uses ink photo when I print documents or photos on the internet and it's always the first cartridge to change. How can I get it to stop and use the regular ink cartridge?

    Hi @ohchango,

    Welcome to the Forums of HP Support!

    I see that you are curious about the black photo cartridge on your HP Photosmart 7520 e-all-in-one printer. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Photo black cartridges are designed to be used, it cannot be bypassed or ignored. When printing from your computer, you can set it to print in grayscale (black ink only), meaning that it will use less of the photo in the black, but they will still get used for maintenance. For more information, see use of inkjet printers ink.

    NOTE: It will use the black photo cartridge for printing black if photographic Support is selected for the type of paper or printing is set to auto or to a picture frame.

    In order to help you, I'll need more information.
    What operating system do you use?
    Mac OS X: How to find which Mac OS X Version is on my computer?
    Windows: How to find the Windows Edition and the Version on your computer.

    If you need assistance, please let me know the instructions above. I look forward to hear from you.

  • . HP Smart printing fails to include images - all-in-one printer, HP Photosmart 3210

    With the help of HP Smart printing on all-in-one printer, HP Photosmart 3210. Smart photo has disappeared from my computer and now reappeared. Now the images are not yet an option to include on the printed page. They do not appear.  Has anyone else had a problem with Photo Smart?

    What operating system do you use?

    What did you do to make them reappear, or just is it?

    Have you noticed updates to HP or Windows until the printer is missing? What happened before he reappeared?

  • Upgrade to Windows OS 8.1 for all-in-one printer, HP Photosmart C4385 of Vista

    My old HP laptop used the Windows Vista operating system. All-in-one printer, HP Photosmart C4385 worked very well. I have a new HP computer that manages the new Windows 8 operating system and I can't load the printing software as the new operating system is incompatible with the printing software. It is certainly another available driver so I can use my all-in-one. Please let me know what the fix is far ahead, but a new printer.

    Hello

    Software for Win 8.1 can be downloaded from the link below.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=3651156

Maybe you are looking for

  • I walk Canon D5 mark iii and Nikon D800E

    I've been with Canon products for 30 years on SLR & DSLR camera and video... And now look forward to the Nikon DSLR camera... As Nikon D800E full frame DSLR... Please give me an advice.

  • Create a parent child

    in collaboration with JDev12.1.2.I have a view object that is based on a query. I then another editable view object from an entity. 2 then have a link with a field view id. The VO being the parent and the VO entity based application shall name a chil

  • Custom dynamic buffer to the Signature of 'living '.

    I use Acrobat Pro DC. I would like to create custom stamps based on a stamp, that must be used in the shop. The patch requires a webcam live signature and the date. Is it possible to create a custom dynamic stamp that loads an image of a signature of

  • OMG WTF Adobe! -Part 2: File Association nightmares abound

    On my Windows PC, since the installation of the new (and supposedly improved) CC 2015, when I click with the right button on a jpeg file and choose 'Open with', mysteriously, Photoshop is not on the list! How crazy is that?So I chose 'research throug

  • How to programmatically get all instances of the application in the IOM?

    Hello experts, Is there a way I can get in a programmatic manner, all instances of the application?If so could you please give a code snippet? Best regards! Carol