HP PHOTOSMART 6520e-all-in-one: Photosmart 6520 stopped printing.

Printer was working fine, after that I updated the driver for Windows 10, then just stopped printing, error communicate is not with the printer, but the status of the printers is connectivity is ready, State of the network again on the computer it says ready until I hit print I get error. Print the printer status reporrt of the printer, but no computer or computers of the tour.

Hi @hpvee

Welcome to the Forums of HP's Support. I understand that you are experiencing what looks like network problems. I would like to help.

First of all, try to launch the HP print and Scan Doctor. If the problem persists, try to go through the network troubleshooting steps in this document. Printers HP - printer keeps Wi-Fi connection.

I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

Tags: HP Printers

Similar Questions

  • j Office Jet 5780 all-in-one will not stop printing

    My printer won't stop printing the last thing that I printed on the net.  I closed it works again and continues to print again and again nonstop.  I like google bar installed but had before anyway.

    Try to clean the queue as follows:

    1. Enter the Control Paneland enter the Printers.
    2. RightclicktheHP Officejet J5700 series icon, then click Cancel all Documents.
    3. Make sure that the printer is turned on, if it prints always - let him 1 or 2 pages more that the PC can still in treatment of the cancellation of print.

    Please let me know if this is useful,

    Shlomi

  • photosmart HP 6520e all in one scanner error message component is broken

    When I try to scan on my hp photosmart 6520e all-in-one printer I get the message scanner problem scanner of the following component is broken cannot copy or scan

    Hello cm16.

    Welcome to the HP Forums!

    I understand that you receive a message indicating "Problem of Scanner," unable to copy or scan using the Photosmart 6520. I will do my best to help you! I recommend you plug this printer into a live wall, not a surge protector. I just want to see if that makes a difference.

    I would try to do a hard reset on your printer. Leave the printer turned on > unplug the power cord at the back of the printer for more than 60 seconds.

    If you receive the same question, please contact HP technical support for further assistance. Click here to read: worldwide Contact HP. Good luck.

  • My Photosmart Premium stopped printing yellow or green on the photos! With the help of HP ink cartridges

    My Photosmart Premium All in One C410a is now printing photos that go far too not blue - no yellows or Greens.  Use the HP cartridges, and all are at least half full.  Help! A perfectly printed in the past.

    I am trying to print from iPhoto, which Ive done hundreds of times and am on premium glossy inkjet photo paper (a new package, incidentally).  I have not changed the settings recently when printing.  Flash Info - just ran a report of print quality and also checked the settings.  Then I printed the same image that I had tried before, and it seems very well!  Have no idea why, but it looks like Im back in business! Wahoo.  Thanks a lot for me having to check so many places.  Must have done something right just now!

  • My hp psc 1350 all-in-one has suddenly stopped working.

    My hp psc 1350 all-in-one has suddenly stopped working. I can no longer open the software by clicking on the icon in the dock.

    Sorry, but I thought that I had reported my all-in-one had started working again. Unfortunately, I can't say what went around, because I don't know.  I had only a small part of the way towards what we'll fix me it when he started to work again. I remember that there was a step that I have been unable to finish, and when I asked how to overcome this problem, it started working again. I don't even have the chance to follow the final instructions. I would rather know what was wrong and what are the fixed elements, but I'll have to settle for a working machine.

  • Printer all in one HP PSC 2175v prints the page number and the title of the document

    Printer all in one HP PSC 2175v prints the page number and the title of the document.

    This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

    I was printing of either Wordpad specifications, using Windows XP.

    Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

    Thank you

  • My HP Officejet 6500 all-in-one wireless suddenly stopped to print black, even if I have a lot I have

    My HP Officejet 6500 all-in-in-one wireless suddenly stopped printing black, even if I have a lot of ink. It prints all other colors. When I try to check the ink levels it tells me that this printer is not available, try again later. I have a lot of ink. Have restarted printer and Mac Book Pro. Driver is up-to-date. Any thoughts?

    Reset the printer.  Turn the power off and then hold the # and 6 keys during and shortly after turning it on.

  • 6520 photosmart all-in-one: can't get Photosmart 6520 to print in black and white only reliable

    I'm trying to get the 6520 Photosmart of HP all-in-one to print only in black and white. I followed the instructions in the manual (go to the preferences of the printer by selecting "Black ink" only 'Print in grayscale,' hit 'Apply' and 'Send'.)

    Now, if I do a table in the word processor Open Office and fill the cells with different colors, they print in black and white. Bonus. This is what I want. However ... When I print a page of Open Office spreadsheet (the ultimate goal), there are all the cells, printed in color of life.

    That is what it is? How can I fix?

    Afternoon @MSWS,.

    I can help you with the printing settings in Open Office.

    It seems that this program has its own options that can bypass the default print settings.

    I found this page of support which may help you with the settings. OpenOffice - control print  

    Thank you

  • Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

    Until that number today printing problems.

    Now can't print from Word or any text file.

    All other OK.

    Uninstalled and reinstalled SW.

    Problem remains.

    Word files and text printed in WHITE.

    All others are OK.

    Hey @Clark_Stillman,

    I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

    How to print a report of quality diagnostic:

    1. Load plain white paper in the input tray.
    2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
    3. Press arrow right () and select Tools, and then tap OK.
    4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

    • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
    • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

    Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

  • HP Photosmart C4480 all-in-One takes forever to print

    HP Pavilion dv6-6061eo laptop

    Serial number [personal information deleted]

    Prod, number: LQ769EA #UUW

    Printer: HP Photosmart C4480 all-in-One connected USB

    Operating system: Windows 7 - all updates - updates of August incl. -ETH on

    Troubleshooting done - but all the reports in the order

    My Tech expertise is intermediate.

    No new software has been installed

    Laptop has worked without problem with a printer HP Photosmart C4580 in Scandinavia, but after my return to France where I use a HP Photosmart C4480 takes forever to print even a single page.

    Hello

    Curiously, the problem has now been resolved by changing the ink cartridges HP with a new set of HP ink cartridges.

  • HP Photosmart C6100 all-in-one series. This printer has a function of history?

    I have a HP Photosmart C6100 all-in-one printer and was hoping someone could help me with a problem I have.

    A few months ago, I printed out some information I needed. I subsequently lost this info with my lap - top and unfortunately, had not saved the scource.

    Is it possible that this information is available from my printer, and if so, how can I access it?

    I would be very grateful if someone can help me with this problem. Cheers, Alex.

    No sorry there is no such a function.

  • HP Photosmart Premium e than all-in One (C310a) no longer print wireless

    I have a Photosmart Premium e All in One (C310a) printer/Scanner and it stopped printing via wireless network - I don't think I've changed anything on the network.  There are the following symptoms:

    1 impressions sent via wireless just sit in the queue after some time and printing status indicates error - printing.

    2. we will analyze more wireless.

    3. If I turn it on to USB connection, it prints very well.

    4. She will print a test page when insiders from the printer menus.

    5. I have downloaded and run the doctor HP Print & Scan which reported no problem.

    I am running XP Home Premium (64-bit) on my computer if it is relevant.  I also completely uninstalled and reinstalled the printer, but that did not help.  Grateful for advice on the resolution of it.

    I finally fixed that!  My router provider was completely useless, when I rang them and just declare that they offer no support for port mapping...  However, it was not the router.  It turns out it was my internet security suite (McAfee), which had decided to start the Spooler SubSystem App from blocking. By chaning this setitng to allow outgoing connections that I solved the problem and the printer work again wireless.

    Thanks for the help and advice AlwaysNeon, I thought would post the solution although case someone each reports the same symptoms again.

  • HP Photosmart 3210 all-in-One of network error printing from Windows 7

    Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down

    -message is "error printing".  Printing to the same printer via USB connection is successful.

    Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.

    Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility

    to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.

    Hello

    Thanks for posting,

    This may be a problem with ports,

    Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.

    If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.

  • HP Photosmart 2610 all-in-One, Manual Two - Sided Printing, HP support email Ticket number: 8028153835

    E-mail HP supports, ticket no: 8028153835

    I bought my printer all-in-one HP Photosmart 2610 in 2005. It has already been installed on a HP laptop, Windows XP computer, and worked all the features.

    He is now on a PC running Windows Vista Ultimate 32. When I tried to install the CD, it wouldn't load because of the Vista OS. Then, I loaded the printer driver HP Photosmart 2600 series full of features (Vista compatible OS) to the following HP Web site link:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-47754-1&LC=en&DLC=en&cc=us&...

    Now I can't get the print preferences to print (double-sided) of manually printing two-sided. This option is available on the original printing software.

    I tried the solutions: HP Image Zone help / duplex prints that show: click the finished tab / in the Document options box / select print on both sides checkbox (this check box is not available).

    When I run the printer of the Panel as an administrator, the printer properties / device watch manual duplex settings: enabled.  When I go to the printer properties / Advanced / impression of the default values, or the finish / Print On Both Sides checkbox is available nor printing Shortcuts tab will allow the option Print On Both Sides to appear (shows that Print On Both Sides: Off).

    E-mail support HP told me to install this patch to correct the problem:

    http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=MP-69848-1&cc=us&LC=en&...

    When I try to install the patch, it will not load because he wants the original CD software. So I'm back to my original problem trying to load the original printing software does not load because the CD is for Windows XP operating system. I'm in the stalemate between the software CD I have, and what is available on the HP site.

    What is your solution?

    I chatted with a HP technician online today.  I had the same problem with Vista, not to recognize the Manual 2 sides print.  His solution was to add a new printer, the HP Deskjet 6500.  This works!

    Go to control panel, hardware and sound, add a printer, add a local printer, select port to use, select HP Deskjet 6500, following, then select if you want whether it is your default printer and then click Next.

    Two back will be available when you select the Deskjet 6500 as your printer, even if you actually use your HP 2610.

  • HP Photosmart 6520 assistant printer error

    I have the printer Photosmart 6520 on the ip address and running windows 8.1

    When I run the wizard of the printer for scanning on side Windows everything works fine

    BUT when I do the desktop option and then try and run the option of analysis (using the Printer Wizard) he wants to re-setup every time.  I went online and downloaded the whole printer for windows 8.1 and still get the same error.

    It was working fine and all of a sudden it started to happen, and I have not loaded something new lately.

    No one knows how to fix?

    Thank you

    Hello JonHayward.

    I understand your concerns. It seems that your printer software has a conflict. Please follow these steps to try to solve your problem:

    Uninstall your software from the control panel of your computer. I'll give you a document here, HP to help achieve these steps.

    Then clean your Temp folder on your computer. I'll give you a YouTube video on this step here.

    Before installing the software on your computer, please follow this HP document using Microsoft System Configuration. Only perform the Figure 2, Figure 3 and figure 4, but exclude number 5 in the present document. Perform no other action.

    Now, install the full software features from the CD or the Web HP heresite. Please choose your operating system that is appropriate; 32-bit or 64-bit.

    Subsequently, perform step 5 in the document "using Microsoft System Configuration ' . This will allow the normal start upward.

    Please send me your troubleshooting steps.

    Good luck.

Maybe you are looking for

  • Equium L300 does not recognize the password to the initial start-up after installation

    Bought a brand new L300 this morning for my wife, this afternoon we are set up and make all the guests he asks including putting a password in 3 times. After which went to start for the first time and my wife got the password, she had chosen in it th

  • How to add a cursor to a graph of waveform on mouse click

    Hi, I have a waveform graph, which is displaying the data. I wish I could click on a point on this graph during execution and add a cursor to this place. Any suggestions? I tried to understand this for awhile but I'm completely stuck. Thank you, Ty

  • Retrieve the index of a table with a value greater than zero

    How is it possible to extract the indices of the elements above zero in a 2D array? Example: Table: 0 12 11 33 0 1 0 0 0 0 2 99 0 9 0 Need to get 12,11,33 table indexes and so on...

  • Network Pro K8600 problems

    Hello We had a problem with the k8600. Theres no possible connection on the network. Indicates the configuration page: http://169.254.246.85 IP 169.254.246.85 .. Default gateway: 0.0.0.0 Configuration Suorce: Auto IP It is of course a random IP addre

  • Win 7 Ater lost backup,

    OEM OS of my HP mini 311-1037NR was Win 7 Home Premium. After a system backup on a disk DVDsl, carried out via an external USB DVD drive multi player, {my laptop has no disk, except the hard drive} I got this message {cannot find the Boot Manager ple