HP Photosmart 7520 malfunctions of e-all-in-one printer on the clock

Similar Questions

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• Problem with my HP PSC 1610 all in one printer of the series which is printing pages in the right order.

  Basically I have the HP PSC 1610 all in one printer. I know not what has happened, but in some way, when I go to print a document of site Web etc, use the printer to print the last page first and keep printing until the 1st real page printed would be changed, which would print on top printed pages.

  My problem is now, it's actually print the path opposite, now it prints the 1st page of first and last last page, which means when I pick up all the printed pages, I then have to sort the page numbers in the correct order.

  Now, I use my printer waste dumps, I print a lot of game documents such as guides etc.. Now if I was just printing pages 1-5, I'd be fine with it, but at this current moment, I was printing guides with more than 50 pages, which really saddens me to have to keep sorting out pages of paper for good order.

  I must say that it does print no pages in a random order, which means like printing, for example, 10 pages, it does not print the page number 6, 2, 5, 8, 3, 10, 1. It is actually printing the pages in the following way, page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10. (When it's over, page 10 is one who is on top of the stack), but I really need to put it so that it will print the pages in the following order, p. 10, 9, 8, 7, 6, 5, 4, 3, 2, 1. (So at the end of printing, the pages of issue 1 is actually on top of the battery), which will allow me to simply staple the pages without the need of haviing re - sort the order of the pages in the correct format.

  I have all my print programs installed as Director of HP and others, so I can change main settings of printers, but I looked through all the preferences main page tabs and I don't find the option to change the printing order of pages.

  I really need help to set my printer settings to print order in the way I need to, but I don't know where the actual parameters are to change this option, and I tried to do an actual search on Google, but I use too many words, search results do not end up giving me instructions that I need He is always giving me other things, more like excavations at random on everything related to my printer and I can't be bothered, working all day to get the good looking, lol. Can someone give me please the instructions I need to set the print order, I need it to be.

  Thanks in advance for all who are able to provide me with assistance.

  Thank you

  Alison Black.

  LIVE FAST, FIGHT HARD CLOSE.
  HUSTLE, LOYALTY, RESPECT

  John Cena (WWE Wrestling Heavyweight Champion)

  Hey

  HP have the customer.

  has attempted to call them abt the question because I'm clearly useless with this technology * beep *.

  but fisgured this is a setting of the printer.

  so if you have the HP SOLUTIONS CENTER's new installed.

  down the down theres a SETTINGS tab click on it.

  go to the PRINTER SETTINGS, once you have clicked on a new dialog box appears.

  the first tab (by following my printer settings ive got a HP PSC 1311) must be ADVANCED

  Click on that, the last option should be OPTIONS AVAILABLE and bloody, WHICH PAGE ORDER WE WERE looking for THAT PERSON DO CAN TELL US ABOUT.

• HP Photosmart 2710, Scanner and Fax all-in-one printer

  My Windows 7 laptop does not recognize my wireless scanner HP 2710. I can print wireless, but analyzed only if connected via USB. Anyone has a solution.

  Thank you JBBLCC

  My Windows 7 laptop does not recognize my wireless scanner HP 2710. I can print wireless, but analyzed only if connected via USB. Anyone has a solution.

  Thank you JBBLCC

  I'm having the same problem. Can connect to print, but does not scan using Windows 7 and HP Photosmart 2710.

  HP's web site says that they do not have a Windows 7 driver that works for all. You will need to connect your computer to the device via USB to use the scan function.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796736&LC=en&DLC=en&cc=us&lang=en&OS=4063&product=420428

  If all goes well, HP will find a way to generate a driver that allows all features of their unit to operate wireless with Windows 7. I can do both print and scan using my other Windows XP laptop and desktop using wireless driver HP Windows XP.

• E-all-in-one printer 4630: the screen flickers

  Printer is new out of the box, the installation went well: print well, wireless connected without problem.

  Here's what I need a fix for: LCD display comes on strong, but less than 4 seconds faints and starts flashing.  Almost unreadable.

  Tried to reset and reboot several times without success.

  I finally found access to HP tech support and they were unable to solve the problem, so in the box, he's going and back to HP for replacement.

  Thanks for your help.

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• Dell Inspiron 530sand by Kodak ESP5 all-in One Printer not detected in Windows Vista.

  Original title: cannot find the printer

  I have a s 530 Dell Inspiron and a Kodak ESP5 All in One Printer. The problem began earlier this year when attempts to print failed because of "jobs in"

  the pipeline "or something.  No matter what I did the same blocking returned.  I emailed Kodak and they spent ages uninstall/re-installing the

  software all for nothing helps.  Then I tried the automated Microsoft Fix it Center but I got nowhere so eventually abandoned.  Now I need the printer again only

  This time, I can't find any sign of it on the computer.  The icon at the bottom right has disappeared and when I bring to the top of the order page and click

  Printers, an empty box appears.  The usb cable has been replaced and tried other usb ports.  Nothing.  I tried the Fix it Center again and if

  anyone from Microsoft read this, was sent around in circles.  By clicking "Run" tells me there is a temporary outage preventing the Printer Wizard

  operating for two weeks?  And try to communicate with the web home page has a similar result, I like my email address is registered, but when I use it

  told me to use another, who is also rejected because the first is already registered. All this may be my fault I'm semi illiterate computerwise

  If no one can say why won't the computer to the printer, I would be very grateful and more if the answer was in terms laymans

  My thanks in advance

  Peter

  Hi Peter,.

  Thanks for posting this question in the Microsoft Community.

  I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you have any security program installed in the computer?

  2 what Microsoft FIXIT did you use exactly?

  I suggest you to install the drivers for the printer and check if it helps.

  You can also go through the steps in the article and check.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• How one properly installed more than one printer all-in-one (different) on the same pcr?

  Once installed 1 All in one printer, how one installs another printer all-in-one (different model) on the same computer without altering the first installation because all software are the same for each all-in-one printer, with the exception of different drivers linked to each different model all-in-one printer?

  Hello Boothkp,

  From what I can understand in your post, you are looking for a solution install several all in printers on one system, without causing problems during the first installation. This can be easy.

  Lets say you have 2 printer that both use the version 14 of the HP Solution Center software. Then, you install the first complete printer with all the software you want to use. The second installation, you just select the option 'Add printer' or 'Add features', this will add then the second printer in the current center solution without a conflict.

  In case this does not work, then please give more information on the model and the operating system you are working on.

  Kind regards

  Van Baardewijk

• where can I find the product number for a HP Deskjet F4580 all-in-One Printer?

  where can I find the product number for a HP Deskjet F4580 all-in-One Printer?

  I typed 'to the HP Deskjet F4580 all-in-One printer"and the installation software cannot find the printer on the HP website.

  But it is the search manually separately via a different browser.

  So there must be another product number!

  Hello

  The following link shows his support site:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3944758

  You can find lots of information on 6 sections.

  Kind regards.

• All-in-one printer, Canon Fax L120

  Just upgraded to Windows 7, which MUST be compatible with this printer.  However the devices and printers, calls it "not specified" IE does not recognize it as a printer.  Tried to update downloan Canon drivers but no joy.  Any suggestions?

  Just upgraded to Windows 7, which MUST be compatible with this printer.

  Of course, Canon Fax L120 all-in-One Printer is compatible with Windows 7.

  Windows 7 Compatibility Center: Canon Fax L120 all-in - One Printer

  The drivers for your downloadable product here.

  Windows 7 32 bit

  Windows 7 64 bit

  Try to uninstall the printer from printers and devices and then plug in your printer. Now as soon as you connect your printer try to install the drivers.

• 6280 all-in-One printer - changing of USB to Ethernet - error - connection cannot find the printer

  I am trying to reinstall my C6280 all-in-One printer on the product - my original installation CD was for a USB connection, I will reinstall for an Ethernet connection for use on our wireless network. I have the HP manual - install the software of the product in Windows XP for a wired network connection (Ethernet) - but get the error message - unable to locate the printer.   I plugged in the ethernet cable to the ethernet port on the computer and the router (Airlink 101).  Any suggestions on what I might hurt?

  Hello

  You can use the following link to install the printer on a wired n/w.

  http://support.HP.com/us-en/document/c01708573

  Just to confirm... Make sure that you connect 'printer and router using the ethernet cable.

  To make sure that your printer is found during installation, after plugging the ethernet cable, make sure that your printer is get a valid IP address.

  Menu - Network settings - display settings - display wired summary.

• Router/HP PSC2175 all-in-One Printer

  Is it possible to connect my HP PSC2175 all-in-one printer into the USB port in my router wureless and set it up as a NETWORK printer, so I can use wireless to all 2 of my computers?

  Karibou

  Hello

  I have not it will work. You need a print server to handle this, because the network of the whole House knows nothing about the printer even plug into the wireless router. It is an example of a print server:

  http://www.netcomm.com.au/products/print-servers

  Kind regards

• 7520 HP photosmart e-All-in-one: printer Photo ink for all print jobs

  Why my printer uses ink cartridge photo instead of the regular cartridge for all print jobs? I need to change a setting? He uses ink photo when I print documents or photos on the internet and it's always the first cartridge to change. How can I get it to stop and use the regular ink cartridge?

  Hi @ohchango,

  Welcome to the Forums of HP Support!

  I see that you are curious about the black photo cartridge on your HP Photosmart 7520 e-all-in-one printer. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Photo black cartridges are designed to be used, it cannot be bypassed or ignored. When printing from your computer, you can set it to print in grayscale (black ink only), meaning that it will use less of the photo in the black, but they will still get used for maintenance. For more information, see use of inkjet printers ink.

  NOTE: It will use the black photo cartridge for printing black if photographic Support is selected for the type of paper or printing is set to auto or to a picture frame.

  In order to help you, I'll need more information.
  What operating system do you use?
  Mac OS X: How to find which Mac OS X Version is on my computer?
  Windows: How to find the Windows Edition and the Version on your computer.

  If you need assistance, please let me know the instructions above. I look forward to hear from you.