HP Photosmart 7520 printer all in one
Earlier this year, I bought a HP Photosmart 7520 all in one printer and now I am about to buy a new office with an operating system of windows 8. The 7520 printer is compatible with windows 8?
Pap5, welcome to the forum.
Here is the page of software and the driver for the printer showing the complete software for win 8:
Therefore, it should work perfectly.
If your problem is solved, please click "accept as a Solution.
Tags: HP Desktops
Similar Questions
-
Photosmart HP 7520: photosmart 7520 printer all-in-one fell my SSID wireless
My photosmart 7520 worked well until a few days ago. It has stopped printing. Wireless test report I am not connected. I tried the wizard wireless set up to get reconnected but my wireless router number has disappeared from the list. I typed it in manually but it won't. Anyone know how I can print again?
Hi @msibrox,
Welcome to the HP Forums!
I noticed that your HP Photosmart 7520 will not connect wireless to your Windows 7 computer. I'm happy to discuss this issue for you!
I would say to begin with a hard reset, by going to this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.
I would also like to cycle power to the router. (With the router, unplug the power cable, wait 30 seconds and plug it back.) Wait for the lights to come back and try to connect to the printer again. Installation of the wireless printer.
If it still does not work, print a Network Setup page. Print a Network Configuration Page, let me know if something falls down, and the number of disconnects.
I hope hear from you soon!
"Please click the Thumbs up icon below to thank me for having responded."
-
I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!
Hello
Mine is about 45 degrees, sufficient space to install the ink cartridges.
Kind regards.
-
I can't stop the automatic delivery of applications. on HP Photosmart 5520 printer all in one
I can't stop the automatic delivery of applications. on HP Photosmart 5520 printer all in one
To add to what sabertooth04 said, here a link to a document that deals with the applications of printing for your printer model. Click the menu drop down titled "Managing planned delivery Print Apps" and the option to cancel or remove an application will be available for you click on and examine measures to remove this application. I hope this helps.
-
How can I check the level of ink on a HP Photosmart C4200 printer all in one
How can I check the level of ink on a HP Photosmart C4200 printer all in one
Hello
Read the PDF of HP paper on your printer:
http://www.HP.com/CTG/manual/c00897310.PDF
Or you can also ask in the Forums of HP's Support.
http://h30434.www3.HP.com/PSG/
See you soon.
-
Photosmart 2610v printer all in one
I have a HP photosmart 2610v printer all-in-one. It is 5 years and more. It worked fine no problems until yesterday that I went to change the color ink cartridge. I removed an empty, put in the new one (removal of all packaging), closed dorrs and said of the window "insert the left dropout color ink cartridge. So I deleted several times re closed the door and he went on to say the same thing. I got before bad cartridges so I returned it to the store and they have exchanged. I came home with the new cartridge and did the same thing, and it keeps telling me to "insert the left dropout color ink cartridge. By the way, I only buy HP ink cartridges. I had trouble with brands and refills is a new HP cartridge. I looked in the directory for troubleshooting and nothing seems to help me. My first difficulty to any computer problem is to restart or unplug and let it set for a little while and reconnect it. I did it too and he continues to say the same thing. Your help with this would be greatly appreciated.
Sorry, the model of the printer should read 2610v
-
7520 E Photosmart all-in-one printer not turn, transformer green light comes on then off again once, unplug the left and I tried once again even.
nothing is dead.
Hi woldtopper,
I understand your Photosmart 7520 is not turning on and will remain lit. Please follow the steps in troubleshooting in the following document; The HP printer will not be running or to respond when the power button is pressed.
If the problem persists, I recommend calling HP and let know, the issue and the steps you have already performed. It may be able to let them know that you completed all the steps in the HP document #c01321436.
If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.
HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.
I hope this helps.
-
hardware: dell 8200 with 512 MB of RAM
always get "MemoryError" during the make'
File '. '. "/ install.py", line 241, in
text_install. Start (language, auto, test_depends, test_unknown, assume_network, max_retries, enable, disable)
File "/ home/rhm/Downloads/nplip-3.15.7/installer/text_install.py", line 801, in the start menu
status, output = utils.run (cmd, core.passwordObj)
File "/ home/rhm/Downloads/hplip-3.15.7/base/utils.py", line 1316, term
return child.exitstatus, ouput.get.value)
(1) by closing the other process, make sure you completed successfully.
(2) by manually specifying IP = 192.168.1.77, hp-setup was unable to find the printer. But there is an error message:
"(Gtk-Message: (pour les informations d'origine, set GTK_DEBUg): cannot retrieve property"Cursor de GtkRange::activate"of type"gboolean"rcfile value '((Gstring') 0x950e7d0)" type "Clara".
I have no idea what this means or what to do next. Help, please.
PS. My LAN contains the Dell 8200 ethernet to AT & T U-verse router connection and WiFi router Photosmart e-all-in-one printer 7520.
-
7520 photosmart e All in One: driver Photosmart 7520 e all-in-one
I've been going round in circles around this hp website that keeps taking me around and in the same places without being able to find a link to download driver 7520 Photosmart e All In One Printer. It was so much easier - now I can spend hours trying to achieve and I'm on this forum ask for help for someone who just sent me a link to download the driver help please!
Hello
You can download the drivers for the Photosmart 7520 directly from the following link:
http://ftp.HP.com/pub/softlib/software12/COL43773/MP-108670-3/PS7520_1315-1.exe
Kind regards
Shlomi
-
Photosmart 7520e printer all in one
I was delighted when the HP customer service (day of week) helped me to set up the printer so that I could print my email. That's all I wanted to do. It was working fine... Until I started to print some of the options intriguing on the LCD (I bought this 7520e in May... It's me that me handles with it now... Only connected to my WiFi router network, or else, last week... Thanks for this CS HP)
There was a little too much actually printing... I had pressed the loads of options on the LCD screen... More than 3 dozen... So I just pressed the red X for "Cancel printing"... After that when I sent my email to the address @hpeprint it is impossible to print! Before you press "Cancel printing" it worked flawlessly.
I tried everything... Subsequently pressing factory reset... It was bad because I seem to have lost the address @hpeprint for my printer that I chose at the start... The new code to put in place the new address @hpeprint... Should work, but... Computer says NO!
Needless to say I'm on a learning curve big when it comes to printers and Windows 8.1 (only to be used in smartphone and Tablet B4)
Any help at all would be greatly appreciated!
Hello @AbsolutBeginner,
Welcome to the Forums of HP's Support. I understand that you have recently done a factory reset on your printer Photosmart 7520 and lost your ePrint personalized e-mail address.
There is no way to retrieve your previous custom ePrint email address, once said that is no longer available to claim again. You will need to create a new ePrint personalized email address.
With regard to all print jobs that you try to cancel, looks like you had accidentally subscribed to several applications print on the front. I've included the document How to access and change sheets printable by HP connected for reference.
-
Photosmart c7280 printer all in one
I recently bought a HP Pavilion 17 laptop. I have an all in one printer c 7280. I downloaded the drivers for windows 8.1 and I actually had a test print. I tried to install the printer and it tells me that it won't work with windows 8.1. Help please I have items to print. y at - it a software update available to make this usable with windows 8.1. Thank you.
Hi patzcatz,
I want to help you to be able to print from your OS 8.1. If you have downloaded software HP Photosmart full feature and drivers for 8.1 and are having problems with the installation, I suggest to use the installation wizard HP Print. HP print and Scan Doctor was designed by HP to offer users the features and troubleshooting problem needed to solve many common problems experienced with HP print and scan the products related to Windows computers. Click here to download this utility.
I hope this helps.
-
HP Photosmart 5524, printer all in one
I have just bought a HP Pavilion 23 all in one touchscreen computers and have installed my printer HP which print a test document, and a page of test ok but it is not on the screen of the printer and peripheral. How to show and make it the default printer. Someone help I will be grateful.
hertford403
Hello
Download and run the doctor for impression scanning HP and it will diagonise and you help with the issue
Hope this helps
-
Download the software for photosmart c3100 printer all in one
I can't find a download for my printer C3100 all-in-one - series # my6b9c416g04kv. The next number is C3125. I want to add this printer to my HP Pavilion dv6 notebook PC. The CD of my printer does not work because of this PC in Windows 7. HP Support and drivers don't downloads for this older printer model?
Hello
Driver and software for PS C3180 can be downloaded from the link below.
-
Photosmart 3210 printer all-in - one
I get an error message on my computer that needs to be replaced my black ink cartridge... I had just installed all new cartridges and they are all full. Why would I receive this message? I called CS and I was told that because my printer was out of warranty, which is probably the driver. Given that I only am not computer savvy, I'm not sure what should be done at this point that the printer is only 4 years old. Can anyone give me a suggestion on how to solve the problem before I spend the money, it is fixed or replaced? Thank you
It is possible that the new cartridges were new in the box, but beyond their life expectancy. You can check the dateof end of warranty as described here. The cartridges which are very old may have ink that has thickened because of evaporation. There's a debate of the issues surrounding the ink expiration. Photosmart 3210 allow a substitution of the expiry of the ink if that is the issue, please refer to your user manual.
-
Help please!
I have a printer that is connected wireless. According to Apple Help (which I would say brightly surpasses anything HP support so far) there is no other application that could interfere with the wireless communication. What should I do now? I have a Macbook 10.8.3 any ideas besides return my printer?
Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Reboot the router.
Reset the printing system:
-Go to System Preferences > print & Scan
-Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.
Maybe you are looking for
-
Toshiba Store Art 2.5 "500 GB - extremely slow
Hello my hard drive the Art nouveau department store seems to be(a) extremely slow when seeking, and(b) slows down the entire operating system. I tried on two different computers, both running with xp sp3.My very old USB hard drive is 100 x faster th
-
How can I access the groups selected in DisplayNewUserDialog?
I'm developing a user for a Deployment Manager so that the production manager can add users they are formed. I changed the simple IO to add a button 'Manage users', which is implemented as a VI. I have this pretty much work except when I add a user u
-
Recovery of Windows Vista BOOT MGR is missing
HP Windows Vista loading SP and began a loop at 3 on 3. Now it says boot mgr is missing. I don't have a disk recovery or start. I use my newer computer with windows 8.1. How to make a floppy disk recovery or the HP windows Vista Starter? any suggesti
-
Hai all, before thnks for attention I want to ask how emulator or type of emulator for blackberry for the use of series BB 8320, JDE, I mean concerning Andi
-
How can I cancel the annual plan InDesign?
The Digital River Brazil rental and now don't know how to cancel.They do not offer a clear support for the cancellation is done!